b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
141 lines
4.0 KiB
C
141 lines
4.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef __SOUND_CS5535AUDIO_H
|
|
#define __SOUND_CS5535AUDIO_H
|
|
|
|
#define cs_writel(cs5535au, reg, val) outl(val, (cs5535au)->port + reg)
|
|
#define cs_writeb(cs5535au, reg, val) outb(val, (cs5535au)->port + reg)
|
|
#define cs_readl(cs5535au, reg) inl((cs5535au)->port + reg)
|
|
#define cs_readw(cs5535au, reg) inw((cs5535au)->port + reg)
|
|
#define cs_readb(cs5535au, reg) inb((cs5535au)->port + reg)
|
|
|
|
#define CS5535AUDIO_MAX_DESCRIPTORS 128
|
|
|
|
/* acc_codec bar0 reg addrs */
|
|
#define ACC_GPIO_STATUS 0x00
|
|
#define ACC_CODEC_STATUS 0x08
|
|
#define ACC_CODEC_CNTL 0x0C
|
|
#define ACC_IRQ_STATUS 0x12
|
|
#define ACC_BM0_CMD 0x20
|
|
#define ACC_BM1_CMD 0x28
|
|
#define ACC_BM0_PRD 0x24
|
|
#define ACC_BM1_PRD 0x2C
|
|
#define ACC_BM0_STATUS 0x21
|
|
#define ACC_BM1_STATUS 0x29
|
|
#define ACC_BM0_PNTR 0x60
|
|
#define ACC_BM1_PNTR 0x64
|
|
|
|
/* acc_codec bar0 reg bits */
|
|
/* ACC_IRQ_STATUS */
|
|
#define IRQ_STS 0
|
|
#define WU_IRQ_STS 1
|
|
#define BM0_IRQ_STS 2
|
|
#define BM1_IRQ_STS 3
|
|
/* ACC_BMX_STATUS */
|
|
#define EOP (1<<0)
|
|
#define BM_EOP_ERR (1<<1)
|
|
/* ACC_BMX_CTL */
|
|
#define BM_CTL_EN 0x01
|
|
#define BM_CTL_PAUSE 0x03
|
|
#define BM_CTL_DIS 0x00
|
|
#define BM_CTL_BYTE_ORD_LE 0x00
|
|
#define BM_CTL_BYTE_ORD_BE 0x04
|
|
/* cs5535 specific ac97 codec register defines */
|
|
#define CMD_MASK 0xFF00FFFF
|
|
#define CMD_NEW 0x00010000
|
|
#define STS_NEW 0x00020000
|
|
#define PRM_RDY_STS 0x00800000
|
|
#define ACC_CODEC_CNTL_WR_CMD (~0x80000000)
|
|
#define ACC_CODEC_CNTL_RD_CMD 0x80000000
|
|
#define ACC_CODEC_CNTL_LNK_SHUTDOWN 0x00040000
|
|
#define ACC_CODEC_CNTL_LNK_WRM_RST 0x00020000
|
|
#define PRD_JMP 0x2000
|
|
#define PRD_EOP 0x4000
|
|
#define PRD_EOT 0x8000
|
|
|
|
enum { CS5535AUDIO_DMA_PLAYBACK, CS5535AUDIO_DMA_CAPTURE, NUM_CS5535AUDIO_DMAS };
|
|
|
|
struct cs5535audio;
|
|
|
|
struct cs5535audio_dma_ops {
|
|
int type;
|
|
void (*enable_dma)(struct cs5535audio *cs5535au);
|
|
void (*disable_dma)(struct cs5535audio *cs5535au);
|
|
void (*pause_dma)(struct cs5535audio *cs5535au);
|
|
void (*setup_prd)(struct cs5535audio *cs5535au, u32 prd_addr);
|
|
u32 (*read_prd)(struct cs5535audio *cs5535au);
|
|
u32 (*read_dma_pntr)(struct cs5535audio *cs5535au);
|
|
};
|
|
|
|
struct cs5535audio_dma_desc {
|
|
u32 addr;
|
|
u16 size;
|
|
u16 ctlreserved;
|
|
};
|
|
|
|
struct cs5535audio_dma {
|
|
const struct cs5535audio_dma_ops *ops;
|
|
struct snd_dma_buffer desc_buf;
|
|
struct snd_pcm_substream *substream;
|
|
unsigned int buf_addr, buf_bytes;
|
|
unsigned int period_bytes, periods;
|
|
u32 saved_prd;
|
|
int pcm_open_flag;
|
|
};
|
|
|
|
struct cs5535audio {
|
|
struct snd_card *card;
|
|
struct snd_ac97 *ac97;
|
|
struct snd_pcm *pcm;
|
|
int irq;
|
|
struct pci_dev *pci;
|
|
unsigned long port;
|
|
spinlock_t reg_lock;
|
|
struct snd_pcm_substream *playback_substream;
|
|
struct snd_pcm_substream *capture_substream;
|
|
struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
|
|
};
|
|
|
|
extern const struct dev_pm_ops snd_cs5535audio_pm;
|
|
|
|
#ifdef CONFIG_OLPC
|
|
void olpc_prequirks(struct snd_card *card,
|
|
struct snd_ac97_template *ac97);
|
|
int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97);
|
|
void olpc_quirks_cleanup(void);
|
|
void olpc_analog_input(struct snd_ac97 *ac97, int on);
|
|
void olpc_mic_bias(struct snd_ac97 *ac97, int on);
|
|
|
|
static inline void olpc_capture_open(struct snd_ac97 *ac97)
|
|
{
|
|
/* default to Analog Input off */
|
|
olpc_analog_input(ac97, 0);
|
|
/* enable MIC Bias for recording */
|
|
olpc_mic_bias(ac97, 1);
|
|
}
|
|
|
|
static inline void olpc_capture_close(struct snd_ac97 *ac97)
|
|
{
|
|
/* disable Analog Input */
|
|
olpc_analog_input(ac97, 0);
|
|
/* disable the MIC Bias (so the recording LED turns off) */
|
|
olpc_mic_bias(ac97, 0);
|
|
}
|
|
#else
|
|
static inline void olpc_prequirks(struct snd_card *card,
|
|
struct snd_ac97_template *ac97) { }
|
|
static inline int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void olpc_quirks_cleanup(void) { }
|
|
static inline void olpc_analog_input(struct snd_ac97 *ac97, int on) { }
|
|
static inline void olpc_mic_bias(struct snd_ac97 *ac97, int on) { }
|
|
static inline void olpc_capture_open(struct snd_ac97 *ac97) { }
|
|
static inline void olpc_capture_close(struct snd_ac97 *ac97) { }
|
|
#endif
|
|
|
|
int snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
|
|
|
|
#endif /* __SOUND_CS5535AUDIO_H */
|
|
|