linux/drivers/mmc/core
Linus Torvalds f60342fac9 MMC core:
- Decrease polling rate for erase/trim/discard
  - Allow non-sleeping GPIOs for card detect
  - Improve mmc block removal path
  - Enable support for mmc_sw_reset() for SDIO cards
  - Add mmc_sw_reset() to allow users to do a soft reset of the card
  - Allow power delay to be tunable via DT
  - Allow card detect debounce delay to be tunable via DT
  - Enable new quirk to limit clock rate for Marvell 8887 chip
  - Don't show eMMC RPMB and BOOT areas in /proc/partitions
  - Add capability to avoid 3.3V signaling for fragile HWs
 
 MMC host:
  - Improve/fixup support for handle highmem pages
  - Remove depends on HAS_DMA in case of platform dependency
  - mvsdio: Enable support for erase/trim/discard
  - rtsx_usb: Enable support for erase/trim/discard
  - renesas_sdhi: Fix WP logic regressions
  - renesas_sdhi: Add r8a77965 support
  - renesas_sdhi: Add R8A77980 to whitelist
  - meson: Add optional support for device reset
  - meson: Add support for the Meson-AXG platform
  - dw_mmc: Add new driver for BlueField DW variant
  - mediatek: Add support for 64G DRAM DMA
  - sunxi: Deploy runtime PM support
  - jz4740: Add support for JZ4780
  - jz4740: Enable support for DT based platforms
  - sdhci: Various improvement to timeout handling
  - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support
  - sdhci-omap: Add support for controller in k2g SoC
  - sdhci-omap: Add workarounds for a couple of Erratas
  - sdhci-omap: Enable support for generic sdhci DT properties
  - sdhci-cadence: Re-send tune request to deal with errata
  - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers
  - sdhci-pci: Avoid 3.3V signaling on some NI 904x
  - sdhci-esdhc-imx: Use watermark levels for PIO access
  - sdhci-msm: Improve card detection handling
  - sdhci-msm: Add support voltage pad switching
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAlsWMJUXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCkWhw/9GdsKWGAezGYcBC9fBKVbZgvl
 Mu7kTebyQy1N7kbIVD7sBz2ila1O2DhVI9SVS7lVhzFwrG4Hup0szb/mjEQgiOAi
 +S2EjKRD3+9sA612fi1uWY+2cXoQiwCHhFZsCS5deL4pYspebzuYRNO5vZD7QlN8
 vLHZ85yxBtMSiysDUTRm9MH2EXb9j6PfrHnVKj0ih112U/ip4PZVc7zHGBZq9zzy
 6WSUMYBe2d1jajJ6MS3gf5Vrp53mz2OLkxKRCtMgut7YOwLZ8biKVa3G69ruQTm8
 jqrMoNrZnhO3aT/1kassCE4ygoXewMZPhYq8k24PcaihR3o/tVI1dlb4Zz70cBb8
 AGAdmdzu1sDEzY6KkSVTZ5IaxQo9SNANste/O/LfsOxHWkWxBQ6H0EeqMdt+W7of
 A0zGKTQrcTFhxzA9OeX3aZwZhjcipQlf8TWnI5+ayPY/UKwMhvWNCTMQtTJAhqBh
 mS7Uk5qd7OSJZTzVYrfLZ2ZOQKhtMbD9lAza/9Ldy5j5QDscLmxmhLOP0yuKI2Zp
 92N3JPIGzfK4aKGCLKSA3KhYwuwaicwsXqfJV+cPz9fFtNs8WdHqyU+nslD0Oxm4
 v3QZKPJa3LWCezPvWGSSTGLEgOvJtLQtJBefX1Hm6sxLbY12aBgu/iNp5UckGlzW
 7zaWXtH8nzYlBKsXf/8=
 =MwCT
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Decrease polling rate for erase/trim/discard
   - Allow non-sleeping GPIOs for card detect
   - Improve mmc block removal path
   - Enable support for mmc_sw_reset() for SDIO cards
   - Add mmc_sw_reset() to allow users to do a soft reset of the card
   - Allow power delay to be tunable via DT
   - Allow card detect debounce delay to be tunable via DT
   - Enable new quirk to limit clock rate for Marvell 8887 chip
   - Don't show eMMC RPMB and BOOT areas in /proc/partitions
   - Add capability to avoid 3.3V signaling for fragile HWs

  MMC host:
   - Improve/fixup support for handle highmem pages
   - Remove depends on HAS_DMA in case of platform dependency
   - mvsdio: Enable support for erase/trim/discard
   - rtsx_usb: Enable support for erase/trim/discard
   - renesas_sdhi: Fix WP logic regressions
   - renesas_sdhi: Add r8a77965 support
   - renesas_sdhi: Add R8A77980 to whitelist
   - meson: Add optional support for device reset
   - meson: Add support for the Meson-AXG platform
   - dw_mmc: Add new driver for BlueField DW variant
   - mediatek: Add support for 64G DRAM DMA
   - sunxi: Deploy runtime PM support
   - jz4740: Add support for JZ4780
   - jz4740: Enable support for DT based platforms
   - sdhci: Various improvement to timeout handling
   - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support
   - sdhci-omap: Add support for controller in k2g SoC
   - sdhci-omap: Add workarounds for a couple of Erratas
   - sdhci-omap: Enable support for generic sdhci DT properties
   - sdhci-cadence: Re-send tune request to deal with errata
   - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers
   - sdhci-pci: Avoid 3.3V signaling on some NI 904x
   - sdhci-esdhc-imx: Use watermark levels for PIO access
   - sdhci-msm: Improve card detection handling
   - sdhci-msm: Add support voltage pad switching"

* tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (104 commits)
  mmc: renesas_sdhi: really fix WP logic regressions
  mmc: mvsdio: Enable MMC_CAP_ERASE
  mmc: mvsdio: Respect card busy time out from mmc core
  mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk
  mmc: sunxi: Use ifdef rather than __maybe_unused
  mmc: mxmmc: Use ifdef rather than __maybe_unused
  mmc: mxmmc: include linux/highmem.h
  mmc: sunxi: mark PM functions as __maybe_unused
  mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase()
  mmc: au1xmmc: handle highmem pages
  mmc: Allow non-sleeping GPIO cd
  mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails
  mmc: sd: Define name for default speed dtr
  mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code
  mmc: sdhci-xenon: use match_string() helper
  mmc: wbsd: handle highmem pages
  mmc: ushc: handle highmem pages
  mmc: mxcmmc: handle highmem pages
  mmc: atmel-mci: use sg_copy_{from,to}_buffer
  mmc: android-goldfish: use sg_copy_{from,to}_buffer
  ...
2018-06-05 16:11:43 -07:00
..
Kconfig mmc: core: Delete bounce buffer Kconfig option 2017-06-20 10:30:17 +02:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
block.c MMC core: 2018-06-05 16:11:43 -07:00
block.h mmc: block: Remove code no longer needed after the switch to blk-mq 2017-12-11 13:02:22 +01:00
bus.c mmc: core: Remove code no longer needed after the switch to blk-mq 2017-12-11 13:05:58 +01:00
bus.h mmc: core: Move public functions from card.h to private headers 2017-02-13 13:20:24 +01:00
card.h mmc: core: Add a new quirk for limiting clock rate 2018-05-02 15:08:39 +02:00
core.c mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase() 2018-05-29 12:24:26 +02:00
core.h mmc: core: Share internal function to set initial signal voltage 2018-05-08 09:33:50 +02:00
debugfs.c mmc: Export host capabilities to debugfs. 2018-03-22 10:36:27 +01:00
host.c mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code 2018-05-29 12:24:26 +02:00
host.h mmc: core: Don't try UHS-I mode if 4-bit mode isn't supported 2018-03-15 09:30:39 +01:00
mmc.c mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code 2018-05-29 12:24:26 +02:00
mmc_ops.c mmc: core: Avoid hanging to claim host for mmc via some nested calls 2018-02-27 15:12:37 +01:00
mmc_ops.h mmc: core: Re-factor code for sending CID 2017-06-20 10:30:45 +02:00
mmc_test.c mmc: mmc_test: Ensure command queue is disabled for testing 2017-12-11 12:51:29 +01:00
pwrseq.c mmc: pwrseq: Add reset callback to the struct mmc_pwrseq_ops 2017-06-20 10:30:09 +02:00
pwrseq.h mmc: pwrseq: Add reset callback to the struct mmc_pwrseq_ops 2017-06-20 10:30:09 +02:00
pwrseq_emmc.c mmc: core: Don't do eMMC HW reset when resuming the eMMC card 2017-06-20 10:30:10 +02:00
pwrseq_sd8787.c mmc: pwrseq: add support for Marvell SD8787 chip 2017-02-13 13:20:33 +01:00
pwrseq_simple.c mmc: pwrseq: Use kmalloc_array instead of stack VLA 2018-05-02 15:08:29 +02:00
queue.c mmc: complete requests from ->timeout 2018-05-29 08:59:21 -06:00
queue.h mmc: block: Remove code no longer needed after the switch to blk-mq 2017-12-11 13:02:22 +01:00
quirks.h mmc: core: sdio: Set SDIO clock of SDR104 to 150MHz for Marvell 8887 chip 2018-05-02 15:08:39 +02:00
sd.c mmc: core: Rename ->reset() bus ops to ->hw_reset() 2018-05-08 09:33:29 +02:00
sd.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sd_ops.c mmc: core: add proper be32 annotation 2017-04-24 21:42:19 +02:00
sd_ops.h mmc: core: add proper be32 annotation 2017-04-24 21:42:19 +02:00
sdio.c mmc: core: Implement ->sw_reset bus ops for SDIO 2018-05-08 09:33:56 +02:00
sdio_bus.c mmc: sdio: Respect all error codes from dev_pm_domain_attach() 2018-05-14 22:58:45 +02:00
sdio_bus.h mmc: core: First step in cleaning up private mmc header files 2017-02-13 13:20:20 +01:00
sdio_cis.c mmc: core: remove BUG_ONs from sdio 2016-12-05 10:31:08 +01:00
sdio_cis.h mmc: core: First step in cleaning up private mmc header files 2017-02-13 13:20:20 +01:00
sdio_io.c mmc: core: simplify return code 2017-04-24 21:41:24 +02:00
sdio_irq.c mmc: update sdio_claim_irq documentation 2018-03-22 10:50:24 +01:00
sdio_ops.c mmc: sdio: improve mmc_io_rw_extended 2017-04-24 21:41:42 +02:00
sdio_ops.h mmc: sdio: Add API to manage SDIO IRQs from a workqueue 2017-06-20 10:30:11 +02:00
sdio_uart.c tty: replace ->proc_fops with ->proc_show 2018-05-16 07:24:30 +02:00
slot-gpio.c mmc: Allow non-sleeping GPIO cd 2018-05-29 12:24:26 +02:00
slot-gpio.h mmc: core: First step in cleaning up private mmc header files 2017-02-13 13:20:20 +01:00