linux/drivers/ata/ahci_da850.c

266 lines
6.5 KiB
C

/*
* DaVinci DA850 AHCI SATA platform driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include "ahci.h"
#define DRV_NAME "ahci_da850"
#define HARDRESET_RETRIES 5
/* SATA PHY Control Register offset from AHCI base */
#define SATA_P0PHYCR_REG 0x178
#define SATA_PHY_MPY(x) ((x) << 0)
#define SATA_PHY_LOS(x) ((x) << 6)
#define SATA_PHY_RXCDR(x) ((x) << 10)
#define SATA_PHY_RXEQ(x) ((x) << 13)
#define SATA_PHY_TXSWING(x) ((x) << 19)
#define SATA_PHY_ENPLL(x) ((x) << 31)
static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg,
void __iomem *ahci_base, u32 mpy)
{
unsigned int val;
/* Enable SATA clock receiver */
val = readl(pwrdn_reg);
val &= ~BIT(0);
writel(val, pwrdn_reg);
val = SATA_PHY_MPY(mpy) | SATA_PHY_LOS(1) | SATA_PHY_RXCDR(4) |
SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) | SATA_PHY_ENPLL(1);
writel(val, ahci_base + SATA_P0PHYCR_REG);
}
static u32 ahci_da850_calculate_mpy(unsigned long refclk_rate)
{
u32 pll_output = 1500000000, needed;
/*
* We need to determine the value of the multiplier (MPY) bits.
* In order to include the 12.5 multiplier we need to first divide
* the refclk rate by ten.
*
* __div64_32() turned out to be unreliable, sometimes returning
* false results.
*/
WARN((refclk_rate % 10) != 0, "refclk must be divisible by 10");
needed = pll_output / (refclk_rate / 10);
/*
* What we have now is (multiplier * 10).
*
* Let's determine the actual register value we need to write.
*/
switch (needed) {
case 50:
return 0x1;
case 60:
return 0x2;
case 80:
return 0x4;
case 100:
return 0x5;
case 120:
return 0x6;
case 125:
return 0x7;
case 150:
return 0x8;
case 200:
return 0x9;
case 250:
return 0xa;
default:
/*
* We should have divided evenly - if not, return an invalid
* value.
*/
return 0;
}
}
static int ahci_da850_softreset(struct ata_link *link,
unsigned int *class, unsigned long deadline)
{
int pmp, ret;
pmp = sata_srst_pmp(link);
/*
* There's an issue with the SATA controller on da850 SoCs: if we
* enable Port Multiplier support, but the drive is connected directly
* to the board, it can't be detected. As a workaround: if PMP is
* enabled, we first call ahci_do_softreset() and pass it the result of
* sata_srst_pmp(). If this call fails, we retry with pmp = 0.
*/
ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
if (pmp && ret == -EBUSY)
return ahci_do_softreset(link, class, 0,
deadline, ahci_check_ready);
return ret;
}
static int ahci_da850_hardreset(struct ata_link *link,
unsigned int *class, unsigned long deadline)
{
int ret, retry = HARDRESET_RETRIES;
bool online;
/*
* In order to correctly service the LCD controller of the da850 SoC,
* we increased the PLL0 frequency to 456MHz from the default 300MHz.
*
* This made the SATA controller unstable and the hardreset operation
* does not always succeed the first time. Before really giving up to
* bring up the link, retry the reset a couple times.
*/
do {
ret = ahci_do_hardreset(link, class, deadline, &online);
if (online)
return ret;
} while (retry--);
return ret;
}
static struct ata_port_operations ahci_da850_port_ops = {
.inherits = &ahci_platform_ops,
.softreset = ahci_da850_softreset,
/*
* No need to override .pmp_softreset - it's only used for actual
* PMP-enabled ports.
*/
.hardreset = ahci_da850_hardreset,
.pmp_hardreset = ahci_da850_hardreset,
};
static const struct ata_port_info ahci_da850_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_da850_port_ops,
};
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
static int ahci_da850_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
void __iomem *pwrdn_reg;
struct resource *res;
struct clk *clk;
u32 mpy;
int rc;
hpriv = ahci_platform_get_resources(pdev, 0);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
/*
* Internally ahci_platform_get_resources() calls clk_get(dev, NULL)
* when trying to obtain the functional clock. This SATA controller
* uses two clocks for which we specify two connection ids. If we don't
* have the functional clock at this point - call clk_get() again with
* con_id = "fck".
*/
if (!hpriv->clks[0]) {
clk = clk_get(dev, "fck");
if (IS_ERR(clk))
return PTR_ERR(clk);
hpriv->clks[0] = clk;
}
/*
* The second clock used by ahci-da850 is the external REFCLK. If we
* didn't get it from ahci_platform_get_resources(), let's try to
* specify the con_id in clk_get().
*/
if (!hpriv->clks[1]) {
clk = clk_get(dev, "refclk");
if (IS_ERR(clk)) {
dev_err(dev, "unable to obtain the reference clock");
return -ENODEV;
}
hpriv->clks[1] = clk;
}
mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1]));
if (mpy == 0) {
dev_err(dev, "invalid REFCLK multiplier value: 0x%x", mpy);
return -EINVAL;
}
rc = ahci_platform_enable_resources(hpriv);
if (rc)
return rc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res) {
rc = -ENODEV;
goto disable_resources;
}
pwrdn_reg = devm_ioremap(dev, res->start, resource_size(res));
if (!pwrdn_reg) {
rc = -ENOMEM;
goto disable_resources;
}
da850_sata_init(dev, pwrdn_reg, hpriv->mmio, mpy);
rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info,
&ahci_platform_sht);
if (rc)
goto disable_resources;
return 0;
disable_resources:
ahci_platform_disable_resources(hpriv);
return rc;
}
static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
ahci_platform_resume);
static const struct of_device_id ahci_da850_of_match[] = {
{ .compatible = "ti,da850-ahci", },
{ },
};
MODULE_DEVICE_TABLE(of, ahci_da850_of_match);
static struct platform_driver ahci_da850_driver = {
.probe = ahci_da850_probe,
.remove = ata_platform_remove_one,
.driver = {
.name = DRV_NAME,
.of_match_table = ahci_da850_of_match,
.pm = &ahci_da850_pm_ops,
},
};
module_platform_driver(ahci_da850_driver);
MODULE_DESCRIPTION("DaVinci DA850 AHCI SATA platform driver");
MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
MODULE_LICENSE("GPL");