302 lines
6.5 KiB
C
302 lines
6.5 KiB
C
/*
|
|
* AD7780/AD7781 SPI ADC driver
|
|
*
|
|
* Copyright 2011 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "../iio.h"
|
|
#include "../sysfs.h"
|
|
#include "../ring_generic.h"
|
|
|
|
#include "ad7780.h"
|
|
|
|
#define AD7780_RDY (1 << 7)
|
|
#define AD7780_FILTER (1 << 6)
|
|
#define AD7780_ERR (1 << 5)
|
|
#define AD7780_ID1 (1 << 4)
|
|
#define AD7780_ID0 (1 << 3)
|
|
#define AD7780_GAIN (1 << 2)
|
|
#define AD7780_PAT1 (1 << 1)
|
|
#define AD7780_PAT0 (1 << 0)
|
|
|
|
struct ad7780_chip_info {
|
|
struct iio_chan_spec channel;
|
|
};
|
|
|
|
struct ad7780_state {
|
|
struct spi_device *spi;
|
|
const struct ad7780_chip_info *chip_info;
|
|
struct regulator *reg;
|
|
struct ad7780_platform_data *pdata;
|
|
wait_queue_head_t wq_data_avail;
|
|
bool done;
|
|
u16 int_vref_mv;
|
|
struct spi_transfer xfer;
|
|
struct spi_message msg;
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
unsigned int data ____cacheline_aligned;
|
|
};
|
|
|
|
enum ad7780_supported_device_ids {
|
|
ID_AD7780,
|
|
ID_AD7781,
|
|
};
|
|
|
|
static int ad7780_read(struct ad7780_state *st, int *val)
|
|
{
|
|
int ret;
|
|
|
|
spi_bus_lock(st->spi->master);
|
|
|
|
enable_irq(st->spi->irq);
|
|
st->done = false;
|
|
gpio_set_value(st->pdata->gpio_pdrst, 1);
|
|
|
|
ret = wait_event_interruptible(st->wq_data_avail, st->done);
|
|
disable_irq_nosync(st->spi->irq);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = spi_sync_locked(st->spi, &st->msg);
|
|
*val = be32_to_cpu(st->data);
|
|
out:
|
|
gpio_set_value(st->pdata->gpio_pdrst, 0);
|
|
spi_bus_unlock(st->spi->master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad7780_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
struct ad7780_state *st = iio_priv(indio_dev);
|
|
struct iio_chan_spec channel = st->chip_info->channel;
|
|
int ret, smpl = 0;
|
|
unsigned long scale_uv;
|
|
|
|
switch (m) {
|
|
case 0:
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = ad7780_read(st, &smpl);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if ((smpl & AD7780_ERR) ||
|
|
!((smpl & AD7780_PAT0) && !(smpl & AD7780_PAT1)))
|
|
return -EIO;
|
|
|
|
*val = (smpl >> channel.scan_type.shift) &
|
|
((1 << (channel.scan_type.realbits)) - 1);
|
|
*val -= (1 << (channel.scan_type.realbits - 1));
|
|
|
|
if (!(smpl & AD7780_GAIN))
|
|
*val *= 128;
|
|
|
|
return IIO_VAL_INT;
|
|
case (1 << IIO_CHAN_INFO_SCALE_SHARED):
|
|
scale_uv = (st->int_vref_mv * 100000)
|
|
>> (channel.scan_type.realbits - 1);
|
|
*val = scale_uv / 100000;
|
|
*val2 = (scale_uv % 100000) * 10;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
|
|
[ID_AD7780] = {
|
|
.channel = IIO_CHAN(IIO_IN, 0, 1, 0, NULL, 0, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
0, 0, IIO_ST('s', 24, 32, 8), 0),
|
|
},
|
|
[ID_AD7781] = {
|
|
.channel = IIO_CHAN(IIO_IN, 0, 1, 0, NULL, 0, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
0, 0, IIO_ST('s', 20, 32, 12), 0),
|
|
},
|
|
};
|
|
|
|
/**
|
|
* Interrupt handler
|
|
*/
|
|
static irqreturn_t ad7780_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct ad7780_state *st = dev_id;
|
|
|
|
st->done = true;
|
|
wake_up_interruptible(&st->wq_data_avail);
|
|
|
|
return IRQ_HANDLED;
|
|
};
|
|
|
|
static const struct iio_info ad7780_info = {
|
|
.read_raw = &ad7780_read_raw,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static int __devinit ad7780_probe(struct spi_device *spi)
|
|
{
|
|
struct ad7780_platform_data *pdata = spi->dev.platform_data;
|
|
struct ad7780_state *st;
|
|
struct iio_dev *indio_dev;
|
|
int ret, voltage_uv = 0;
|
|
|
|
if (!pdata) {
|
|
dev_dbg(&spi->dev, "no platform data?\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
indio_dev = iio_allocate_device(sizeof(*st));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->reg = regulator_get(&spi->dev, "vcc");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
goto error_put_reg;
|
|
|
|
voltage_uv = regulator_get_voltage(st->reg);
|
|
}
|
|
|
|
st->chip_info =
|
|
&ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data];
|
|
|
|
st->pdata = pdata;
|
|
|
|
if (pdata && pdata->vref_mv)
|
|
st->int_vref_mv = pdata->vref_mv;
|
|
else if (voltage_uv)
|
|
st->int_vref_mv = voltage_uv / 1000;
|
|
else
|
|
dev_warn(&spi->dev, "reference voltage unspecified\n");
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
st->spi = spi;
|
|
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = &st->chip_info->channel;
|
|
indio_dev->num_channels = 1;
|
|
indio_dev->info = &ad7780_info;
|
|
|
|
init_waitqueue_head(&st->wq_data_avail);
|
|
|
|
/* Setup default message */
|
|
|
|
st->xfer.rx_buf = &st->data;
|
|
st->xfer.len = st->chip_info->channel.scan_type.storagebits / 8;
|
|
|
|
spi_message_init(&st->msg);
|
|
spi_message_add_tail(&st->xfer, &st->msg);
|
|
|
|
ret = gpio_request_one(st->pdata->gpio_pdrst, GPIOF_OUT_INIT_LOW,
|
|
"AD7780 /PDRST");
|
|
if (ret) {
|
|
dev_err(&spi->dev, "failed to request GPIO PDRST\n");
|
|
goto error_disable_reg;
|
|
}
|
|
|
|
ret = request_irq(spi->irq, ad7780_interrupt,
|
|
IRQF_TRIGGER_FALLING, spi_get_device_id(spi)->name, st);
|
|
if (ret)
|
|
goto error_free_gpio;
|
|
|
|
disable_irq(spi->irq);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_free_irq;
|
|
|
|
return 0;
|
|
|
|
error_free_irq:
|
|
free_irq(spi->irq, st);
|
|
error_free_gpio:
|
|
gpio_free(st->pdata->gpio_pdrst);
|
|
error_disable_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
error_put_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_put(st->reg);
|
|
|
|
iio_free_device(indio_dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad7780_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ad7780_state *st = iio_priv(indio_dev);
|
|
|
|
free_irq(spi->irq, st);
|
|
gpio_free(st->pdata->gpio_pdrst);
|
|
if (!IS_ERR(st->reg)) {
|
|
regulator_disable(st->reg);
|
|
regulator_put(st->reg);
|
|
}
|
|
iio_device_unregister(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id ad7780_id[] = {
|
|
{"ad7780", ID_AD7780},
|
|
{"ad7781", ID_AD7781},
|
|
{}
|
|
};
|
|
|
|
static struct spi_driver ad7780_driver = {
|
|
.driver = {
|
|
.name = "ad7780",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = ad7780_probe,
|
|
.remove = __devexit_p(ad7780_remove),
|
|
.id_table = ad7780_id,
|
|
};
|
|
|
|
static int __init ad7780_init(void)
|
|
{
|
|
return spi_register_driver(&ad7780_driver);
|
|
}
|
|
module_init(ad7780_init);
|
|
|
|
static void __exit ad7780_exit(void)
|
|
{
|
|
spi_unregister_driver(&ad7780_driver);
|
|
}
|
|
module_exit(ad7780_exit);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7780/1 ADC");
|
|
MODULE_LICENSE("GPL v2");
|