982 lines
23 KiB
C
982 lines
23 KiB
C
/*
|
|
* AD7792/AD7793 SPI ADC driver
|
|
*
|
|
* Copyright 2011 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "../iio.h"
|
|
#include "../sysfs.h"
|
|
#include "../ring_generic.h"
|
|
#include "../ring_sw.h"
|
|
#include "../trigger.h"
|
|
#include "../trigger_consumer.h"
|
|
|
|
#include "ad7793.h"
|
|
|
|
/* NOTE:
|
|
* The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
|
|
* In order to avoid contentions on the SPI bus, it's therefore necessary
|
|
* to use spi bus locking.
|
|
*
|
|
* The DOUT/RDY output must also be wired to an interrupt capable GPIO.
|
|
*/
|
|
|
|
struct ad7793_chip_info {
|
|
struct iio_chan_spec channel[7];
|
|
};
|
|
|
|
struct ad7793_state {
|
|
struct spi_device *spi;
|
|
struct iio_trigger *trig;
|
|
const struct ad7793_chip_info *chip_info;
|
|
struct regulator *reg;
|
|
struct ad7793_platform_data *pdata;
|
|
wait_queue_head_t wq_data_avail;
|
|
bool done;
|
|
bool irq_dis;
|
|
u16 int_vref_mv;
|
|
u16 mode;
|
|
u16 conf;
|
|
u32 scale_avail[8][2];
|
|
u32 available_scan_masks[7];
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
u8 data[4] ____cacheline_aligned;
|
|
};
|
|
|
|
enum ad7793_supported_device_ids {
|
|
ID_AD7792,
|
|
ID_AD7793,
|
|
};
|
|
|
|
static int __ad7793_write_reg(struct ad7793_state *st, bool locked,
|
|
bool cs_change, unsigned char reg,
|
|
unsigned size, unsigned val)
|
|
{
|
|
u8 *data = st->data;
|
|
struct spi_transfer t = {
|
|
.tx_buf = data,
|
|
.len = size + 1,
|
|
.cs_change = cs_change,
|
|
};
|
|
struct spi_message m;
|
|
|
|
data[0] = AD7793_COMM_WRITE | AD7793_COMM_ADDR(reg);
|
|
|
|
switch (size) {
|
|
case 3:
|
|
data[1] = val >> 16;
|
|
data[2] = val >> 8;
|
|
data[3] = val;
|
|
break;
|
|
case 2:
|
|
data[1] = val >> 8;
|
|
data[2] = val;
|
|
break;
|
|
case 1:
|
|
data[1] = val;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
spi_message_init(&m);
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
if (locked)
|
|
return spi_sync_locked(st->spi, &m);
|
|
else
|
|
return spi_sync(st->spi, &m);
|
|
}
|
|
|
|
static int ad7793_write_reg(struct ad7793_state *st,
|
|
unsigned reg, unsigned size, unsigned val)
|
|
{
|
|
return __ad7793_write_reg(st, false, false, reg, size, val);
|
|
}
|
|
|
|
static int __ad7793_read_reg(struct ad7793_state *st, bool locked,
|
|
bool cs_change, unsigned char reg,
|
|
int *val, unsigned size)
|
|
{
|
|
u8 *data = st->data;
|
|
int ret;
|
|
struct spi_transfer t[] = {
|
|
{
|
|
.tx_buf = data,
|
|
.len = 1,
|
|
}, {
|
|
.rx_buf = data,
|
|
.len = size,
|
|
.cs_change = cs_change,
|
|
},
|
|
};
|
|
struct spi_message m;
|
|
|
|
data[0] = AD7793_COMM_READ | AD7793_COMM_ADDR(reg);
|
|
|
|
spi_message_init(&m);
|
|
spi_message_add_tail(&t[0], &m);
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
if (locked)
|
|
ret = spi_sync_locked(st->spi, &m);
|
|
else
|
|
ret = spi_sync(st->spi, &m);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (size) {
|
|
case 3:
|
|
*val = data[0] << 16 | data[1] << 8 | data[2];
|
|
break;
|
|
case 2:
|
|
*val = data[0] << 8 | data[1];
|
|
break;
|
|
case 1:
|
|
*val = data[0];
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7793_read_reg(struct ad7793_state *st,
|
|
unsigned reg, int *val, unsigned size)
|
|
{
|
|
return __ad7793_read_reg(st, 0, 0, reg, val, size);
|
|
}
|
|
|
|
static int ad7793_read(struct ad7793_state *st, unsigned ch,
|
|
unsigned len, int *val)
|
|
{
|
|
int ret;
|
|
st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) | AD7793_CONF_CHAN(ch);
|
|
st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) |
|
|
AD7793_MODE_SEL(AD7793_MODE_SINGLE);
|
|
|
|
ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf);
|
|
|
|
spi_bus_lock(st->spi->master);
|
|
st->done = false;
|
|
|
|
ret = __ad7793_write_reg(st, 1, 1, AD7793_REG_MODE,
|
|
sizeof(st->mode), st->mode);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
st->irq_dis = false;
|
|
enable_irq(st->spi->irq);
|
|
wait_event_interruptible(st->wq_data_avail, st->done);
|
|
|
|
ret = __ad7793_read_reg(st, 1, 0, AD7793_REG_DATA, val, len);
|
|
out:
|
|
spi_bus_unlock(st->spi->master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad7793_calibrate(struct ad7793_state *st, unsigned mode, unsigned ch)
|
|
{
|
|
int ret;
|
|
|
|
st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) | AD7793_CONF_CHAN(ch);
|
|
st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) | AD7793_MODE_SEL(mode);
|
|
|
|
ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf);
|
|
|
|
spi_bus_lock(st->spi->master);
|
|
st->done = false;
|
|
|
|
ret = __ad7793_write_reg(st, 1, 1, AD7793_REG_MODE,
|
|
sizeof(st->mode), st->mode);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
st->irq_dis = false;
|
|
enable_irq(st->spi->irq);
|
|
wait_event_interruptible(st->wq_data_avail, st->done);
|
|
|
|
st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) |
|
|
AD7793_MODE_SEL(AD7793_MODE_IDLE);
|
|
|
|
ret = __ad7793_write_reg(st, 1, 0, AD7793_REG_MODE,
|
|
sizeof(st->mode), st->mode);
|
|
out:
|
|
spi_bus_unlock(st->spi->master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const u8 ad7793_calib_arr[6][2] = {
|
|
{AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M},
|
|
{AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M},
|
|
{AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M},
|
|
{AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M},
|
|
{AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M},
|
|
{AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M}
|
|
};
|
|
|
|
static int ad7793_calibrate_all(struct ad7793_state *st)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ad7793_calib_arr); i++) {
|
|
ret = ad7793_calibrate(st, ad7793_calib_arr[i][0],
|
|
ad7793_calib_arr[i][1]);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
return 0;
|
|
out:
|
|
dev_err(&st->spi->dev, "Calibration failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static int ad7793_setup(struct ad7793_state *st)
|
|
{
|
|
int i, ret = -1;
|
|
unsigned long long scale_uv;
|
|
u32 id;
|
|
|
|
/* reset the serial interface */
|
|
ret = spi_write(st->spi, (u8 *)&ret, sizeof(ret));
|
|
if (ret < 0)
|
|
goto out;
|
|
msleep(1); /* Wait for at least 500us */
|
|
|
|
/* write/read test for device presence */
|
|
ret = ad7793_read_reg(st, AD7793_REG_ID, &id, 1);
|
|
if (ret)
|
|
goto out;
|
|
|
|
id &= AD7793_ID_MASK;
|
|
|
|
if (!((id == AD7792_ID) || (id == AD7793_ID))) {
|
|
dev_err(&st->spi->dev, "device ID query failed\n");
|
|
goto out;
|
|
}
|
|
|
|
st->mode = (st->pdata->mode & ~AD7793_MODE_SEL(-1)) |
|
|
AD7793_MODE_SEL(AD7793_MODE_IDLE);
|
|
st->conf = st->pdata->conf & ~AD7793_CONF_CHAN(-1);
|
|
|
|
ret = ad7793_write_reg(st, AD7793_REG_MODE, sizeof(st->mode), st->mode);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ad7793_write_reg(st, AD7793_REG_IO,
|
|
sizeof(st->pdata->io), st->pdata->io);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ad7793_calibrate_all(st);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Populate available ADC input ranges */
|
|
for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
|
|
scale_uv = ((u64)st->int_vref_mv * 100000000)
|
|
>> (st->chip_info->channel[0].scan_type.realbits -
|
|
(!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1));
|
|
scale_uv >>= i;
|
|
|
|
st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
|
|
st->scale_avail[i][0] = scale_uv;
|
|
}
|
|
|
|
return 0;
|
|
out:
|
|
dev_err(&st->spi->dev, "setup failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static int ad7793_scan_from_ring(struct ad7793_state *st, unsigned ch, int *val)
|
|
{
|
|
struct iio_ring_buffer *ring = iio_priv_to_dev(st)->ring;
|
|
int ret;
|
|
s64 dat64[2];
|
|
u32 *dat32 = (u32 *)dat64;
|
|
|
|
if (!(ring->scan_mask & (1 << ch)))
|
|
return -EBUSY;
|
|
|
|
ret = ring->access->read_last(ring, (u8 *) &dat64);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = *dat32;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7793_ring_preenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
struct iio_ring_buffer *ring = indio_dev->ring;
|
|
size_t d_size;
|
|
unsigned channel;
|
|
|
|
if (!ring->scan_count)
|
|
return -EINVAL;
|
|
|
|
channel = __ffs(ring->scan_mask);
|
|
|
|
d_size = ring->scan_count *
|
|
indio_dev->channels[0].scan_type.storagebits / 8;
|
|
|
|
if (ring->scan_timestamp) {
|
|
d_size += sizeof(s64);
|
|
|
|
if (d_size % sizeof(s64))
|
|
d_size += sizeof(s64) - (d_size % sizeof(s64));
|
|
}
|
|
|
|
if (indio_dev->ring->access->set_bytes_per_datum)
|
|
indio_dev->ring->access->set_bytes_per_datum(indio_dev->ring,
|
|
d_size);
|
|
|
|
st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) |
|
|
AD7793_MODE_SEL(AD7793_MODE_CONT);
|
|
st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) |
|
|
AD7793_CONF_CHAN(indio_dev->channels[channel].address);
|
|
|
|
ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf);
|
|
|
|
spi_bus_lock(st->spi->master);
|
|
__ad7793_write_reg(st, 1, 1, AD7793_REG_MODE,
|
|
sizeof(st->mode), st->mode);
|
|
|
|
st->irq_dis = false;
|
|
enable_irq(st->spi->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7793_ring_postdisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
|
|
st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) |
|
|
AD7793_MODE_SEL(AD7793_MODE_IDLE);
|
|
|
|
st->done = false;
|
|
wait_event_interruptible(st->wq_data_avail, st->done);
|
|
|
|
if (!st->irq_dis)
|
|
disable_irq_nosync(st->spi->irq);
|
|
|
|
__ad7793_write_reg(st, 1, 0, AD7793_REG_MODE,
|
|
sizeof(st->mode), st->mode);
|
|
|
|
return spi_bus_unlock(st->spi->master);
|
|
}
|
|
|
|
/**
|
|
* ad7793_trigger_handler() bh of trigger launched polling to ring buffer
|
|
**/
|
|
|
|
static irqreturn_t ad7793_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct iio_ring_buffer *ring = indio_dev->ring;
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
s64 dat64[2];
|
|
s32 *dat32 = (s32 *)dat64;
|
|
|
|
if (ring->scan_count)
|
|
__ad7793_read_reg(st, 1, 1, AD7793_REG_DATA,
|
|
dat32,
|
|
indio_dev->channels[0].scan_type.realbits/8);
|
|
|
|
/* Guaranteed to be aligned with 8 byte boundary */
|
|
if (ring->scan_timestamp)
|
|
dat64[1] = pf->timestamp;
|
|
|
|
ring->access->store_to(ring, (u8 *)dat64, pf->timestamp);
|
|
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
st->irq_dis = false;
|
|
enable_irq(st->spi->irq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct iio_ring_setup_ops ad7793_ring_setup_ops = {
|
|
.preenable = &ad7793_ring_preenable,
|
|
.postenable = &iio_triggered_ring_postenable,
|
|
.predisable = &iio_triggered_ring_predisable,
|
|
.postdisable = &ad7793_ring_postdisable,
|
|
};
|
|
|
|
static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev)
|
|
{
|
|
int ret;
|
|
|
|
indio_dev->ring = iio_sw_rb_allocate(indio_dev);
|
|
if (!indio_dev->ring) {
|
|
ret = -ENOMEM;
|
|
goto error_ret;
|
|
}
|
|
/* Effectively select the ring buffer implementation */
|
|
indio_dev->ring->access = &ring_sw_access_funcs;
|
|
indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
|
|
&ad7793_trigger_handler,
|
|
IRQF_ONESHOT,
|
|
indio_dev,
|
|
"ad7793_consumer%d",
|
|
indio_dev->id);
|
|
if (indio_dev->pollfunc == NULL) {
|
|
ret = -ENOMEM;
|
|
goto error_deallocate_sw_rb;
|
|
}
|
|
|
|
/* Ring buffer functions - here trigger setup related */
|
|
indio_dev->ring->setup_ops = &ad7793_ring_setup_ops;
|
|
|
|
/* Flag that polled ring buffering is possible */
|
|
indio_dev->modes |= INDIO_RING_TRIGGERED;
|
|
return 0;
|
|
|
|
error_deallocate_sw_rb:
|
|
iio_sw_rb_free(indio_dev->ring);
|
|
error_ret:
|
|
return ret;
|
|
}
|
|
|
|
static void ad7793_ring_cleanup(struct iio_dev *indio_dev)
|
|
{
|
|
iio_dealloc_pollfunc(indio_dev->pollfunc);
|
|
iio_sw_rb_free(indio_dev->ring);
|
|
}
|
|
|
|
/**
|
|
* ad7793_data_rdy_trig_poll() the event handler for the data rdy trig
|
|
**/
|
|
static irqreturn_t ad7793_data_rdy_trig_poll(int irq, void *private)
|
|
{
|
|
struct ad7793_state *st = iio_priv(private);
|
|
|
|
st->done = true;
|
|
wake_up_interruptible(&st->wq_data_avail);
|
|
disable_irq_nosync(irq);
|
|
st->irq_dis = true;
|
|
iio_trigger_poll(st->trig, iio_get_time_ns());
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ad7793_probe_trigger(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
st->trig = iio_allocate_trigger("%s-dev%d",
|
|
spi_get_device_id(st->spi)->name,
|
|
indio_dev->id);
|
|
if (st->trig == NULL) {
|
|
ret = -ENOMEM;
|
|
goto error_ret;
|
|
}
|
|
|
|
ret = request_irq(st->spi->irq,
|
|
ad7793_data_rdy_trig_poll,
|
|
IRQF_TRIGGER_LOW,
|
|
spi_get_device_id(st->spi)->name,
|
|
indio_dev);
|
|
if (ret)
|
|
goto error_free_trig;
|
|
|
|
disable_irq_nosync(st->spi->irq);
|
|
st->irq_dis = true;
|
|
st->trig->dev.parent = &st->spi->dev;
|
|
st->trig->owner = THIS_MODULE;
|
|
st->trig->private_data = indio_dev;
|
|
|
|
ret = iio_trigger_register(st->trig);
|
|
|
|
/* select default trigger */
|
|
indio_dev->trig = st->trig;
|
|
if (ret)
|
|
goto error_free_irq;
|
|
|
|
return 0;
|
|
|
|
error_free_irq:
|
|
free_irq(st->spi->irq, indio_dev);
|
|
error_free_trig:
|
|
iio_free_trigger(st->trig);
|
|
error_ret:
|
|
return ret;
|
|
}
|
|
|
|
static void ad7793_remove_trigger(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
|
|
iio_trigger_unregister(st->trig);
|
|
free_irq(st->spi->irq, indio_dev);
|
|
iio_free_trigger(st->trig);
|
|
}
|
|
|
|
static const u16 sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 33, 19,
|
|
17, 16, 12, 10, 8, 6, 4};
|
|
|
|
static ssize_t ad7793_read_frequency(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
sample_freq_avail[AD7793_MODE_RATE(st->mode)]);
|
|
}
|
|
|
|
static ssize_t ad7793_write_frequency(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t len)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
long lval;
|
|
int i, ret;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (iio_ring_enabled(indio_dev)) {
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return -EBUSY;
|
|
}
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
ret = strict_strtol(buf, 10, &lval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = -EINVAL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sample_freq_avail); i++)
|
|
if (lval == sample_freq_avail[i]) {
|
|
mutex_lock(&indio_dev->mlock);
|
|
st->mode &= ~AD7793_MODE_RATE(-1);
|
|
st->mode |= AD7793_MODE_RATE(i);
|
|
ad7793_write_reg(st, AD7793_REG_MODE,
|
|
sizeof(st->mode), st->mode);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
ret = 0;
|
|
}
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
|
|
ad7793_read_frequency,
|
|
ad7793_write_frequency);
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
|
|
"470 242 123 62 50 39 33 19 17 16 12 10 8 6 4");
|
|
|
|
static ssize_t ad7793_show_scale_available(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
int i, len = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
|
|
len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0],
|
|
st->scale_avail[i][1]);
|
|
|
|
len += sprintf(buf + len, "\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, in-in_scale_available,
|
|
S_IRUGO, ad7793_show_scale_available, NULL, 0);
|
|
|
|
static struct attribute *ad7793_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency.dev_attr.attr,
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_dev_attr_in_m_in_scale_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group ad7793_attribute_group = {
|
|
.attrs = ad7793_attributes,
|
|
};
|
|
|
|
static int ad7793_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
int ret, smpl = 0;
|
|
unsigned long long scale_uv;
|
|
bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR);
|
|
|
|
switch (m) {
|
|
case 0:
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (iio_ring_enabled(indio_dev))
|
|
ret = ad7793_scan_from_ring(st,
|
|
chan->scan_index, &smpl);
|
|
else
|
|
ret = ad7793_read(st, chan->address,
|
|
chan->scan_type.realbits / 8, &smpl);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = (smpl >> chan->scan_type.shift) &
|
|
((1 << (chan->scan_type.realbits)) - 1);
|
|
|
|
if (!unipolar)
|
|
*val -= (1 << (chan->scan_type.realbits - 1));
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case (1 << IIO_CHAN_INFO_SCALE_SHARED):
|
|
*val = st->scale_avail[(st->conf >> 8) & 0x7][0];
|
|
*val2 = st->scale_avail[(st->conf >> 8) & 0x7][1];
|
|
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
|
|
case (1 << IIO_CHAN_INFO_SCALE_SEPARATE):
|
|
switch (chan->type) {
|
|
case IIO_IN:
|
|
/* 1170mV / 2^23 * 6 */
|
|
scale_uv = (1170ULL * 100000000ULL * 6ULL)
|
|
>> (chan->scan_type.realbits -
|
|
(unipolar ? 0 : 1));
|
|
break;
|
|
case IIO_TEMP:
|
|
/* Always uses unity gain and internal ref */
|
|
scale_uv = (2500ULL * 100000000ULL)
|
|
>> (chan->scan_type.realbits -
|
|
(unipolar ? 0 : 1));
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*val2 = do_div(scale_uv, 100000000) * 10;
|
|
*val = scale_uv;
|
|
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ad7793_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
int ret, i;
|
|
unsigned int tmp;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (iio_ring_enabled(indio_dev)) {
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return -EBUSY;
|
|
}
|
|
|
|
switch (mask) {
|
|
case (1 << IIO_CHAN_INFO_SCALE_SHARED):
|
|
ret = -EINVAL;
|
|
for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
|
|
if (val2 == st->scale_avail[i][1]) {
|
|
tmp = st->conf;
|
|
st->conf &= ~AD7793_CONF_GAIN(-1);
|
|
st->conf |= AD7793_CONF_GAIN(i);
|
|
|
|
if (tmp != st->conf) {
|
|
ad7793_write_reg(st, AD7793_REG_CONF,
|
|
sizeof(st->conf),
|
|
st->conf);
|
|
ad7793_calibrate_all(st);
|
|
}
|
|
ret = 0;
|
|
}
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return ret;
|
|
}
|
|
|
|
static int ad7793_validate_trigger(struct iio_dev *indio_dev,
|
|
struct iio_trigger *trig)
|
|
{
|
|
if (indio_dev->trig != trig)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
long mask)
|
|
{
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
}
|
|
|
|
static const struct iio_info ad7793_info = {
|
|
.read_raw = &ad7793_read_raw,
|
|
.write_raw = &ad7793_write_raw,
|
|
.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
|
|
.attrs = &ad7793_attribute_group,
|
|
.validate_trigger = ad7793_validate_trigger,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
|
|
[ID_AD7793] = {
|
|
.channel[0] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 0, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
AD7793_CH_AIN1P_AIN1M,
|
|
0, IIO_ST('s', 24, 32, 0), 0),
|
|
.channel[1] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 1, 1,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
AD7793_CH_AIN2P_AIN2M,
|
|
1, IIO_ST('s', 24, 32, 0), 0),
|
|
.channel[2] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 2, 2,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
AD7793_CH_AIN3P_AIN3M,
|
|
2, IIO_ST('s', 24, 32, 0), 0),
|
|
.channel[3] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, "shorted", 0, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
AD7793_CH_AIN1M_AIN1M,
|
|
3, IIO_ST('s', 24, 32, 0), 0),
|
|
.channel[4] = IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SEPARATE),
|
|
AD7793_CH_TEMP,
|
|
4, IIO_ST('s', 24, 32, 0), 0),
|
|
.channel[5] = IIO_CHAN(IIO_IN, 0, 1, 0, "supply", 4, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SEPARATE),
|
|
AD7793_CH_AVDD_MONITOR,
|
|
5, IIO_ST('s', 24, 32, 0), 0),
|
|
.channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6),
|
|
},
|
|
[ID_AD7792] = {
|
|
.channel[0] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 0, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
AD7793_CH_AIN1P_AIN1M,
|
|
0, IIO_ST('s', 16, 32, 0), 0),
|
|
.channel[1] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 1, 1,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
AD7793_CH_AIN2P_AIN2M,
|
|
1, IIO_ST('s', 16, 32, 0), 0),
|
|
.channel[2] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 2, 2,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
AD7793_CH_AIN3P_AIN3M,
|
|
2, IIO_ST('s', 16, 32, 0), 0),
|
|
.channel[3] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, "shorted", 0, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SHARED),
|
|
AD7793_CH_AIN1M_AIN1M,
|
|
3, IIO_ST('s', 16, 32, 0), 0),
|
|
.channel[4] = IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SEPARATE),
|
|
AD7793_CH_TEMP,
|
|
4, IIO_ST('s', 16, 32, 0), 0),
|
|
.channel[5] = IIO_CHAN(IIO_IN, 0, 1, 0, "supply", 4, 0,
|
|
(1 << IIO_CHAN_INFO_SCALE_SEPARATE),
|
|
AD7793_CH_AVDD_MONITOR,
|
|
5, IIO_ST('s', 16, 32, 0), 0),
|
|
.channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6),
|
|
},
|
|
};
|
|
|
|
static int __devinit ad7793_probe(struct spi_device *spi)
|
|
{
|
|
struct ad7793_platform_data *pdata = spi->dev.platform_data;
|
|
struct ad7793_state *st;
|
|
struct iio_dev *indio_dev;
|
|
int ret, i, voltage_uv = 0, regdone = 0;
|
|
|
|
if (!pdata) {
|
|
dev_err(&spi->dev, "no platform data?\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!spi->irq) {
|
|
dev_err(&spi->dev, "no IRQ?\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
indio_dev = iio_allocate_device(sizeof(*st));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->reg = regulator_get(&spi->dev, "vcc");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
goto error_put_reg;
|
|
|
|
voltage_uv = regulator_get_voltage(st->reg);
|
|
}
|
|
|
|
st->chip_info =
|
|
&ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data];
|
|
|
|
st->pdata = pdata;
|
|
|
|
if (pdata && pdata->vref_mv)
|
|
st->int_vref_mv = pdata->vref_mv;
|
|
else if (voltage_uv)
|
|
st->int_vref_mv = voltage_uv / 1000;
|
|
else
|
|
st->int_vref_mv = 2500; /* Build-in ref */
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
st->spi = spi;
|
|
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = st->chip_info->channel;
|
|
indio_dev->available_scan_masks = st->available_scan_masks;
|
|
indio_dev->num_channels = 7;
|
|
indio_dev->info = &ad7793_info;
|
|
|
|
for (i = 0; i < indio_dev->num_channels; i++)
|
|
st->available_scan_masks[i] = (1 << i) | (1 <<
|
|
indio_dev->channels[indio_dev->num_channels - 1].
|
|
scan_index);
|
|
|
|
init_waitqueue_head(&st->wq_data_avail);
|
|
|
|
ret = ad7793_register_ring_funcs_and_init(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_unreg_ring;
|
|
regdone = 1;
|
|
|
|
ret = ad7793_probe_trigger(indio_dev);
|
|
if (ret)
|
|
goto error_unreg_ring;
|
|
|
|
ret = iio_ring_buffer_register(indio_dev,
|
|
indio_dev->channels,
|
|
indio_dev->num_channels);
|
|
if (ret)
|
|
goto error_remove_trigger;
|
|
|
|
ret = ad7793_setup(st);
|
|
if (ret)
|
|
goto error_uninitialize_ring;
|
|
|
|
return 0;
|
|
|
|
error_uninitialize_ring:
|
|
iio_ring_buffer_unregister(indio_dev);
|
|
error_remove_trigger:
|
|
ad7793_remove_trigger(indio_dev);
|
|
error_unreg_ring:
|
|
ad7793_ring_cleanup(indio_dev);
|
|
error_disable_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
error_put_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_put(st->reg);
|
|
|
|
if (regdone)
|
|
iio_device_unregister(indio_dev);
|
|
else
|
|
iio_free_device(indio_dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad7793_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ad7793_state *st = iio_priv(indio_dev);
|
|
|
|
iio_ring_buffer_unregister(indio_dev);
|
|
ad7793_remove_trigger(indio_dev);
|
|
ad7793_ring_cleanup(indio_dev);
|
|
|
|
if (!IS_ERR(st->reg)) {
|
|
regulator_disable(st->reg);
|
|
regulator_put(st->reg);
|
|
}
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id ad7793_id[] = {
|
|
{"ad7792", ID_AD7792},
|
|
{"ad7793", ID_AD7793},
|
|
{}
|
|
};
|
|
|
|
static struct spi_driver ad7793_driver = {
|
|
.driver = {
|
|
.name = "ad7793",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = ad7793_probe,
|
|
.remove = __devexit_p(ad7793_remove),
|
|
.id_table = ad7793_id,
|
|
};
|
|
|
|
static int __init ad7793_init(void)
|
|
{
|
|
return spi_register_driver(&ad7793_driver);
|
|
}
|
|
module_init(ad7793_init);
|
|
|
|
static void __exit ad7793_exit(void)
|
|
{
|
|
spi_unregister_driver(&ad7793_driver);
|
|
}
|
|
module_exit(ad7793_exit);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7792/3 ADC");
|
|
MODULE_LICENSE("GPL v2");
|