OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
c0316a945a
linux/arch/sh/lib/mcount.S
Geert Uytterhoeven 363737d664 mtd/uclinux: Use generic __bss_stop instead of _ebss 
The standard (see BSS_SECTION() in <asm-generic/vmlinux.lds.h> and
<asm-generic/sections.h>) symbol for the end of BSS is __bss_stop.
This allows to remove all local declarations that have been added to
several architectures just to please CONFIG_MTD_UCLINUX.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-27 09:59:43 +02:00

309 lines
5.6 KiB
ArmAsm
Raw Blame History

/*
* arch/sh/lib/mcount.S
*
* Copyright (C) 2008, 2009 Paul Mundt
* Copyright (C) 2008, 2009 Matt Fleming
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <asm/ftrace.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#define MCOUNT_ENTER() \
mov.l r4, @-r15; \
mov.l r5, @-r15; \
mov.l r6, @-r15; \
mov.l r7, @-r15; \
sts.l pr, @-r15; \
\
mov.l @(20,r15),r4; \
sts pr, r5
#define MCOUNT_LEAVE() \
lds.l @r15+, pr; \
mov.l @r15+, r7; \
mov.l @r15+, r6; \
mov.l @r15+, r5; \
rts; \
mov.l @r15+, r4
#ifdef CONFIG_STACK_DEBUG
/*
* Perform diagnostic checks on the state of the kernel stack.
*
* Check for stack overflow. If there is less than 1KB free
* then it has overflowed.
*
* Make sure the stack pointer contains a valid address. Valid
* addresses for kernel stacks are anywhere after the bss
* (after __bss_stop) and anywhere in init_thread_union (init_stack).
*/
#define STACK_CHECK() \
mov #(THREAD_SIZE >> 10), r0; \
shll8 r0; \
shll2 r0; \
\
/* r1 = sp & (THREAD_SIZE - 1) */ \
mov #-1, r1; \
add r0, r1; \
and r15, r1; \
\
mov #TI_SIZE, r3; \
mov #(STACK_WARN >> 8), r2; \
shll8 r2; \
add r3, r2; \
\
/* Is the stack overflowing? */ \
cmp/hi r2, r1; \
bf stack_panic; \
\
/* If sp > __bss_stop then we're OK. */ \
mov.l .L_ebss, r1; \
cmp/hi r1, r15; \
bt 1f; \
\
/* If sp < init_stack, we're not OK. */ \
mov.l .L_init_thread_union, r1; \
cmp/hs r1, r15; \
bf stack_panic; \
\
/* If sp > init_stack && sp < __bss_stop, not OK. */ \
add r0, r1; \
cmp/hs r1, r15; \
bt stack_panic; \
1:
#else
#define STACK_CHECK()
#endif /* CONFIG_STACK_DEBUG */
.align 2
.globl _mcount
.type _mcount,@function
.globl mcount
.type mcount,@function
_mcount:
mcount:
STACK_CHECK()
#ifndef CONFIG_FUNCTION_TRACER
rts
nop
#else
#ifndef CONFIG_DYNAMIC_FTRACE
mov.l .Lfunction_trace_stop, r0
mov.l @r0, r0
tst r0, r0
bf ftrace_stub
#endif
MCOUNT_ENTER()
#ifdef CONFIG_DYNAMIC_FTRACE
.globl mcount_call
mcount_call:
mov.l .Lftrace_stub, r6
#else
mov.l .Lftrace_trace_function, r6
mov.l ftrace_stub, r7
cmp/eq r6, r7
bt skip_trace
mov.l @r6, r6
#endif
jsr @r6
nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
mov.l .Lftrace_graph_return, r6
mov.l .Lftrace_stub, r7
cmp/eq r6, r7
bt 1f
mov.l .Lftrace_graph_caller, r0
jmp @r0
nop
1:
mov.l .Lftrace_graph_entry, r6
mov.l .Lftrace_graph_entry_stub, r7
cmp/eq r6, r7
bt skip_trace
mov.l .Lftrace_graph_caller, r0
jmp @r0
nop
.align 2
.Lftrace_graph_return:
.long ftrace_graph_return
.Lftrace_graph_entry:
.long ftrace_graph_entry
.Lftrace_graph_entry_stub:
.long ftrace_graph_entry_stub
.Lftrace_graph_caller:
.long ftrace_graph_caller
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
.globl skip_trace
skip_trace:
MCOUNT_LEAVE()
.align 2
.Lftrace_trace_function:
.long ftrace_trace_function
#ifdef CONFIG_DYNAMIC_FTRACE
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/*
* NOTE: Do not move either ftrace_graph_call or ftrace_caller
* as this will affect the calculation of GRAPH_INSN_OFFSET.
*/
.globl ftrace_graph_call
ftrace_graph_call:
mov.l .Lskip_trace, r0
jmp @r0
nop
.align 2
.Lskip_trace:
.long skip_trace
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
.globl ftrace_caller
ftrace_caller:
mov.l .Lfunction_trace_stop, r0
mov.l @r0, r0
tst r0, r0
bf ftrace_stub
MCOUNT_ENTER()
.globl ftrace_call
ftrace_call:
mov.l .Lftrace_stub, r6
jsr @r6
nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
bra ftrace_graph_call
nop
#else
MCOUNT_LEAVE()
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#endif /* CONFIG_DYNAMIC_FTRACE */
.align 2
.Lfunction_trace_stop:
.long function_trace_stop
/*
* NOTE: From here on the locations of the .Lftrace_stub label and
* ftrace_stub itself are fixed. Adding additional data here will skew
* the displacement for the memory table and break the block replacement.
* Place new labels either after the ftrace_stub body, or before
* ftrace_caller. You have been warned.
*/
.Lftrace_stub:
.long ftrace_stub
.globl ftrace_stub
ftrace_stub:
rts
nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl ftrace_graph_caller
ftrace_graph_caller:
mov.l 2f, r0
mov.l @r0, r0
tst r0, r0
bt 1f
mov.l 3f, r1
jmp @r1
nop
1:
/*
* MCOUNT_ENTER() pushed 5 registers onto the stack, so
* the stack address containing our return address is
* r15 + 20.
*/
mov #20, r0
add r15, r0
mov r0, r4
mov.l .Lprepare_ftrace_return, r0
jsr @r0
nop
MCOUNT_LEAVE()
.align 2
2: .long function_trace_stop
3: .long skip_trace
.Lprepare_ftrace_return:
.long prepare_ftrace_return
.globl return_to_handler
return_to_handler:
/*
* Save the return values.
*/
mov.l r0, @-r15
mov.l r1, @-r15
mov #0, r4
mov.l .Lftrace_return_to_handler, r0
jsr @r0
nop
/*
* The return value from ftrace_return_handler has the real
* address that we should return to.
*/
lds r0, pr
mov.l @r15+, r1
rts
mov.l @r15+, r0
.align 2
.Lftrace_return_to_handler:
.long ftrace_return_to_handler
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#endif /* CONFIG_FUNCTION_TRACER */
#ifdef CONFIG_STACK_DEBUG
.globl stack_panic
stack_panic:
mov.l .Ldump_stack, r0
jsr @r0
nop
mov.l .Lpanic, r0
jsr @r0
mov.l .Lpanic_s, r4
rts
nop
.align 2
.L_init_thread_union:
.long init_thread_union
.Lpanic:
.long panic
.Lpanic_s:
.long .Lpanic_str
.Ldump_stack:
.long dump_stack
.section .rodata
.align 2
.Lpanic_str:
.string "Stack error"
#endif /* CONFIG_STACK_DEBUG */
Reference in New Issue View Git Blame Copy Permalink