f2b8901d3e
The Enhanced Periodic Interrupt Timer (EPIT) is found on newer i.MX SoCs and can be used as an alternative system timer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
243 lines
5.8 KiB
C
243 lines
5.8 KiB
C
/*
|
|
* linux/arch/arm/plat-mxc/epit.c
|
|
*
|
|
* Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*/
|
|
|
|
#define EPITCR 0x00
|
|
#define EPITSR 0x04
|
|
#define EPITLR 0x08
|
|
#define EPITCMPR 0x0c
|
|
#define EPITCNR 0x10
|
|
|
|
#define EPITCR_EN (1 << 0)
|
|
#define EPITCR_ENMOD (1 << 1)
|
|
#define EPITCR_OCIEN (1 << 2)
|
|
#define EPITCR_RLD (1 << 3)
|
|
#define EPITCR_PRESC(x) (((x) & 0xfff) << 4)
|
|
#define EPITCR_SWR (1 << 16)
|
|
#define EPITCR_IOVW (1 << 17)
|
|
#define EPITCR_DBGEN (1 << 18)
|
|
#define EPITCR_WAITEN (1 << 19)
|
|
#define EPITCR_RES (1 << 20)
|
|
#define EPITCR_STOPEN (1 << 21)
|
|
#define EPITCR_OM_DISCON (0 << 22)
|
|
#define EPITCR_OM_TOGGLE (1 << 22)
|
|
#define EPITCR_OM_CLEAR (2 << 22)
|
|
#define EPITCR_OM_SET (3 << 22)
|
|
#define EPITCR_CLKSRC_OFF (0 << 24)
|
|
#define EPITCR_CLKSRC_PERIPHERAL (1 << 24)
|
|
#define EPITCR_CLKSRC_REF_HIGH (1 << 24)
|
|
#define EPITCR_CLKSRC_REF_LOW (3 << 24)
|
|
|
|
#define EPITSR_OCIF (1 << 0)
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach/time.h>
|
|
#include <mach/common.h>
|
|
|
|
static struct clock_event_device clockevent_epit;
|
|
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
|
|
|
|
static void __iomem *timer_base;
|
|
|
|
static inline void epit_irq_disable(void)
|
|
{
|
|
u32 val;
|
|
|
|
val = __raw_readl(timer_base + EPITCR);
|
|
val &= ~EPITCR_OCIEN;
|
|
__raw_writel(val, timer_base + EPITCR);
|
|
}
|
|
|
|
static inline void epit_irq_enable(void)
|
|
{
|
|
u32 val;
|
|
|
|
val = __raw_readl(timer_base + EPITCR);
|
|
val |= EPITCR_OCIEN;
|
|
__raw_writel(val, timer_base + EPITCR);
|
|
}
|
|
|
|
static void epit_irq_acknowledge(void)
|
|
{
|
|
__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
|
|
}
|
|
|
|
static cycle_t epit_read(struct clocksource *cs)
|
|
{
|
|
return 0 - __raw_readl(timer_base + EPITCNR);
|
|
}
|
|
|
|
static struct clocksource clocksource_epit = {
|
|
.name = "epit",
|
|
.rating = 200,
|
|
.read = epit_read,
|
|
.mask = CLOCKSOURCE_MASK(32),
|
|
.shift = 20,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
};
|
|
|
|
static int __init epit_clocksource_init(struct clk *timer_clk)
|
|
{
|
|
unsigned int c = clk_get_rate(timer_clk);
|
|
|
|
clocksource_epit.mult = clocksource_hz2mult(c,
|
|
clocksource_epit.shift);
|
|
clocksource_register(&clocksource_epit);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* clock event */
|
|
|
|
static int epit_set_next_event(unsigned long evt,
|
|
struct clock_event_device *unused)
|
|
{
|
|
unsigned long tcmp;
|
|
|
|
tcmp = __raw_readl(timer_base + EPITCNR);
|
|
|
|
__raw_writel(tcmp - evt, timer_base + EPITCMPR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void epit_set_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *evt)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* The timer interrupt generation is disabled at least
|
|
* for enough time to call epit_set_next_event()
|
|
*/
|
|
local_irq_save(flags);
|
|
|
|
/* Disable interrupt in GPT module */
|
|
epit_irq_disable();
|
|
|
|
if (mode != clockevent_mode) {
|
|
/* Set event time into far-far future */
|
|
|
|
/* Clear pending interrupt */
|
|
epit_irq_acknowledge();
|
|
}
|
|
|
|
/* Remember timer mode */
|
|
clockevent_mode = mode;
|
|
local_irq_restore(flags);
|
|
|
|
switch (mode) {
|
|
case CLOCK_EVT_MODE_PERIODIC:
|
|
printk(KERN_ERR "epit_set_mode: Periodic mode is not "
|
|
"supported for i.MX EPIT\n");
|
|
break;
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
/*
|
|
* Do not put overhead of interrupt enable/disable into
|
|
* epit_set_next_event(), the core has about 4 minutes
|
|
* to call epit_set_next_event() or shutdown clock after
|
|
* mode switching
|
|
*/
|
|
local_irq_save(flags);
|
|
epit_irq_enable();
|
|
local_irq_restore(flags);
|
|
break;
|
|
case CLOCK_EVT_MODE_SHUTDOWN:
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
case CLOCK_EVT_MODE_RESUME:
|
|
/* Left event sources disabled, no more interrupts appear */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* IRQ handler for the timer
|
|
*/
|
|
static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = &clockevent_epit;
|
|
|
|
epit_irq_acknowledge();
|
|
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction epit_timer_irq = {
|
|
.name = "i.MX EPIT Timer Tick",
|
|
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
|
.handler = epit_timer_interrupt,
|
|
};
|
|
|
|
static struct clock_event_device clockevent_epit = {
|
|
.name = "epit",
|
|
.features = CLOCK_EVT_FEAT_ONESHOT,
|
|
.shift = 32,
|
|
.set_mode = epit_set_mode,
|
|
.set_next_event = epit_set_next_event,
|
|
.rating = 200,
|
|
};
|
|
|
|
static int __init epit_clockevent_init(struct clk *timer_clk)
|
|
{
|
|
unsigned int c = clk_get_rate(timer_clk);
|
|
|
|
clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
|
|
clockevent_epit.shift);
|
|
clockevent_epit.max_delta_ns =
|
|
clockevent_delta2ns(0xfffffffe, &clockevent_epit);
|
|
clockevent_epit.min_delta_ns =
|
|
clockevent_delta2ns(0x800, &clockevent_epit);
|
|
|
|
clockevent_epit.cpumask = cpumask_of(0);
|
|
|
|
clockevents_register_device(&clockevent_epit);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
|
|
{
|
|
clk_enable(timer_clk);
|
|
|
|
timer_base = base;
|
|
|
|
/*
|
|
* Initialise to a known state (all timers off, and timing reset)
|
|
*/
|
|
__raw_writel(0x0, timer_base + EPITCR);
|
|
|
|
__raw_writel(0xffffffff, timer_base + EPITLR);
|
|
__raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
|
|
timer_base + EPITCR);
|
|
|
|
/* init and register the timer to the framework */
|
|
epit_clocksource_init(timer_clk);
|
|
epit_clockevent_init(timer_clk);
|
|
|
|
/* Make irqs happen */
|
|
setup_irq(irq, &epit_timer_irq);
|
|
}
|