linux/drivers/nvmem/lpc18xx_eeprom.c

281 lines
7.0 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* NXP LPC18xx/LPC43xx EEPROM memory NVMEM driver
*
* Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
*/
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
/* Registers */
#define LPC18XX_EEPROM_AUTOPROG 0x00c
#define LPC18XX_EEPROM_AUTOPROG_WORD 0x1
#define LPC18XX_EEPROM_CLKDIV 0x014
#define LPC18XX_EEPROM_PWRDWN 0x018
#define LPC18XX_EEPROM_PWRDWN_NO 0x0
#define LPC18XX_EEPROM_PWRDWN_YES 0x1
#define LPC18XX_EEPROM_INTSTAT 0xfe0
#define LPC18XX_EEPROM_INTSTAT_END_OF_PROG BIT(2)
#define LPC18XX_EEPROM_INTSTATCLR 0xfe8
#define LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST BIT(2)
/* Fixed page size (bytes) */
#define LPC18XX_EEPROM_PAGE_SIZE 0x80
/* EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) */
#define LPC18XX_EEPROM_CLOCK_HZ 1500000
/* EEPROM requires 3 ms of erase/program time between each writing */
#define LPC18XX_EEPROM_PROGRAM_TIME 3
struct lpc18xx_eeprom_dev {
struct clk *clk;
void __iomem *reg_base;
void __iomem *mem_base;
struct nvmem_device *nvmem;
unsigned reg_bytes;
unsigned val_bytes;
int size;
};
static inline void lpc18xx_eeprom_writel(struct lpc18xx_eeprom_dev *eeprom,
u32 reg, u32 val)
{
writel(val, eeprom->reg_base + reg);
}
static inline u32 lpc18xx_eeprom_readl(struct lpc18xx_eeprom_dev *eeprom,
u32 reg)
{
return readl(eeprom->reg_base + reg);
}
static int lpc18xx_eeprom_busywait_until_prog(struct lpc18xx_eeprom_dev *eeprom)
{
unsigned long end;
u32 val;
/* Wait until EEPROM program operation has finished */
end = jiffies + msecs_to_jiffies(LPC18XX_EEPROM_PROGRAM_TIME * 10);
while (time_is_after_jiffies(end)) {
val = lpc18xx_eeprom_readl(eeprom, LPC18XX_EEPROM_INTSTAT);
if (val & LPC18XX_EEPROM_INTSTAT_END_OF_PROG) {
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_INTSTATCLR,
LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST);
return 0;
}
usleep_range(LPC18XX_EEPROM_PROGRAM_TIME * USEC_PER_MSEC,
(LPC18XX_EEPROM_PROGRAM_TIME + 1) * USEC_PER_MSEC);
}
return -ETIMEDOUT;
}
static int lpc18xx_eeprom_gather_write(void *context, unsigned int reg,
void *val, size_t bytes)
{
struct lpc18xx_eeprom_dev *eeprom = context;
unsigned int offset = reg;
int ret;
/*
* The last page contains the EEPROM initialization data and is not
* writable.
*/
if ((reg > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE) ||
(reg + bytes > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE))
return -EINVAL;
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
LPC18XX_EEPROM_PWRDWN_NO);
/* Wait 100 us while the EEPROM wakes up */
usleep_range(100, 200);
while (bytes) {
writel(*(u32 *)val, eeprom->mem_base + offset);
ret = lpc18xx_eeprom_busywait_until_prog(eeprom);
if (ret < 0)
return ret;
bytes -= eeprom->val_bytes;
val += eeprom->val_bytes;
offset += eeprom->val_bytes;
}
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
LPC18XX_EEPROM_PWRDWN_YES);
return 0;
}
static int lpc18xx_eeprom_read(void *context, unsigned int offset,
void *val, size_t bytes)
{
struct lpc18xx_eeprom_dev *eeprom = context;
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
LPC18XX_EEPROM_PWRDWN_NO);
/* Wait 100 us while the EEPROM wakes up */
usleep_range(100, 200);
while (bytes) {
*(u32 *)val = readl(eeprom->mem_base + offset);
bytes -= eeprom->val_bytes;
val += eeprom->val_bytes;
offset += eeprom->val_bytes;
}
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
LPC18XX_EEPROM_PWRDWN_YES);
return 0;
}
static struct nvmem_config lpc18xx_nvmem_config = {
.name = "lpc18xx-eeprom",
.stride = 4,
.word_size = 4,
.reg_read = lpc18xx_eeprom_read,
.reg_write = lpc18xx_eeprom_gather_write,
};
static int lpc18xx_eeprom_probe(struct platform_device *pdev)
{
struct lpc18xx_eeprom_dev *eeprom;
struct device *dev = &pdev->dev;
struct reset_control *rst;
unsigned long clk_rate;
struct resource *res;
int ret;
eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
if (!eeprom)
return -ENOMEM;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
eeprom->reg_base = devm_ioremap_resource(dev, res);
if (IS_ERR(eeprom->reg_base))
return PTR_ERR(eeprom->reg_base);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
eeprom->mem_base = devm_ioremap_resource(dev, res);
if (IS_ERR(eeprom->mem_base))
return PTR_ERR(eeprom->mem_base);
eeprom->clk = devm_clk_get(&pdev->dev, "eeprom");
if (IS_ERR(eeprom->clk)) {
dev_err(&pdev->dev, "failed to get eeprom clock\n");
return PTR_ERR(eeprom->clk);
}
ret = clk_prepare_enable(eeprom->clk);
if (ret < 0) {
dev_err(dev, "failed to prepare/enable eeprom clk: %d\n", ret);
return ret;
}
rst = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(rst)) {
dev_err(dev, "failed to get reset: %ld\n", PTR_ERR(rst));
ret = PTR_ERR(rst);
goto err_clk;
}
ret = reset_control_assert(rst);
if (ret < 0) {
dev_err(dev, "failed to assert reset: %d\n", ret);
goto err_clk;
}
eeprom->val_bytes = 4;
eeprom->reg_bytes = 4;
/*
* Clock rate is generated by dividing the system bus clock by the
* division factor, contained in the divider register (minus 1 encoded).
*/
clk_rate = clk_get_rate(eeprom->clk);
clk_rate = DIV_ROUND_UP(clk_rate, LPC18XX_EEPROM_CLOCK_HZ) - 1;
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_CLKDIV, clk_rate);
/*
* Writing a single word to the page will start the erase/program cycle
* automatically
*/
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_AUTOPROG,
LPC18XX_EEPROM_AUTOPROG_WORD);
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
LPC18XX_EEPROM_PWRDWN_YES);
eeprom->size = resource_size(res);
lpc18xx_nvmem_config.size = resource_size(res);
lpc18xx_nvmem_config.dev = dev;
lpc18xx_nvmem_config.priv = eeprom;
eeprom->nvmem = devm_nvmem_register(dev, &lpc18xx_nvmem_config);
if (IS_ERR(eeprom->nvmem)) {
ret = PTR_ERR(eeprom->nvmem);
goto err_clk;
}
platform_set_drvdata(pdev, eeprom);
return 0;
err_clk:
clk_disable_unprepare(eeprom->clk);
return ret;
}
static int lpc18xx_eeprom_remove(struct platform_device *pdev)
{
struct lpc18xx_eeprom_dev *eeprom = platform_get_drvdata(pdev);
clk_disable_unprepare(eeprom->clk);
return 0;
}
static const struct of_device_id lpc18xx_eeprom_of_match[] = {
{ .compatible = "nxp,lpc1857-eeprom" },
{ },
};
MODULE_DEVICE_TABLE(of, lpc18xx_eeprom_of_match);
static struct platform_driver lpc18xx_eeprom_driver = {
.probe = lpc18xx_eeprom_probe,
.remove = lpc18xx_eeprom_remove,
.driver = {
.name = "lpc18xx-eeprom",
.of_match_table = lpc18xx_eeprom_of_match,
},
};
module_platform_driver(lpc18xx_eeprom_driver);
MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
MODULE_DESCRIPTION("NXP LPC18xx EEPROM memory Driver");
MODULE_LICENSE("GPL v2");