linux/arch/m68k/include/asm/mcfslt.h
Philippe De Muyter ea49f8ffae m68knommu: add basic mmu-less m548x support
Add a very basic mmu-less support for coldfire m548x family.  This is perhaps
also valid for m547x family.  The port comprises the serial, tick timer and
reboot support.  The gpio part compiles but is empty.  This gives a functional
albeit limited linux for the m548x coldfire family.  This has been tested
on a Freescale M548xEVB Lite board with a M5484 processor and the default
dbug monitor.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21 10:17:30 +10:00

45 lines
1.3 KiB
C

/****************************************************************************/
/*
* mcfslt.h -- ColdFire internal Slice (SLT) timer support defines.
*
* (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2009, Philippe De Muyter (phdm@macqel.be)
*/
/****************************************************************************/
#ifndef mcfslt_h
#define mcfslt_h
/****************************************************************************/
/*
* Get address specific defines for the 547x.
*/
#define MCFSLT_TIMER0 0x900 /* Base address of TIMER0 */
#define MCFSLT_TIMER1 0x910 /* Base address of TIMER1 */
/*
* Define the SLT timer register set addresses.
*/
#define MCFSLT_STCNT 0x00 /* Terminal count */
#define MCFSLT_SCR 0x04 /* Control */
#define MCFSLT_SCNT 0x08 /* Current count */
#define MCFSLT_SSR 0x0C /* Status */
/*
* Bit definitions for the SCR control register.
*/
#define MCFSLT_SCR_RUN 0x04000000 /* Run mode (continuous) */
#define MCFSLT_SCR_IEN 0x02000000 /* Interrupt enable */
#define MCFSLT_SCR_TEN 0x01000000 /* Timer enable */
/*
* Bit definitions for the SSR status register.
*/
#define MCFSLT_SSR_BE 0x02000000 /* Bus error condition */
#define MCFSLT_SSR_TE 0x01000000 /* Timeout condition */
/****************************************************************************/
#endif /* mcfslt_h */