177 lines
4.5 KiB
C
177 lines
4.5 KiB
C
|
|
/*
|
|
* Copyright (C) 2006 Red Hat
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/init.h>
|
|
|
|
#define DRV_NAME "jmicron"
|
|
|
|
typedef enum {
|
|
PORT_PATA0 = 0,
|
|
PORT_PATA1 = 1,
|
|
PORT_SATA = 2,
|
|
} port_type;
|
|
|
|
/**
|
|
* jmicron_cable_detect - cable detection
|
|
* @hwif: IDE port
|
|
*
|
|
* Returns the cable type.
|
|
*/
|
|
|
|
static u8 jmicron_cable_detect(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(hwif->dev);
|
|
|
|
u32 control;
|
|
u32 control5;
|
|
|
|
int port = hwif->channel;
|
|
port_type port_map[2];
|
|
|
|
pci_read_config_dword(pdev, 0x40, &control);
|
|
|
|
/* There are two basic mappings. One has the two SATA ports merged
|
|
as master/slave and the secondary as PATA, the other has only the
|
|
SATA port mapped */
|
|
if (control & (1 << 23)) {
|
|
port_map[0] = PORT_SATA;
|
|
port_map[1] = PORT_PATA0;
|
|
} else {
|
|
port_map[0] = PORT_SATA;
|
|
port_map[1] = PORT_SATA;
|
|
}
|
|
|
|
/* The 365/366 may have this bit set to map the second PATA port
|
|
as the internal primary channel */
|
|
pci_read_config_dword(pdev, 0x80, &control5);
|
|
if (control5 & (1<<24))
|
|
port_map[0] = PORT_PATA1;
|
|
|
|
/* The two ports may then be logically swapped by the firmware */
|
|
if (control & (1 << 22))
|
|
port = port ^ 1;
|
|
|
|
/*
|
|
* Now we know which physical port we are talking about we can
|
|
* actually do our cable checking etc. Thankfully we don't need
|
|
* to do the plumbing for other cases.
|
|
*/
|
|
switch (port_map[port]) {
|
|
case PORT_PATA0:
|
|
if (control & (1 << 3)) /* 40/80 pin primary */
|
|
return ATA_CBL_PATA40;
|
|
return ATA_CBL_PATA80;
|
|
case PORT_PATA1:
|
|
if (control5 & (1 << 19)) /* 40/80 pin secondary */
|
|
return ATA_CBL_PATA40;
|
|
return ATA_CBL_PATA80;
|
|
case PORT_SATA:
|
|
break;
|
|
}
|
|
/* Avoid bogus "control reaches end of non-void function" */
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
|
|
static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* jmicron_set_dma_mode - set host controller for DMA mode
|
|
* @hwif: port
|
|
* @drive: drive
|
|
*
|
|
* As the JMicron snoops for timings we don't need to do anything here.
|
|
*/
|
|
|
|
static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
|
|
{
|
|
}
|
|
|
|
static const struct ide_port_ops jmicron_port_ops = {
|
|
.set_pio_mode = jmicron_set_pio_mode,
|
|
.set_dma_mode = jmicron_set_dma_mode,
|
|
.cable_detect = jmicron_cable_detect,
|
|
};
|
|
|
|
static const struct ide_port_info jmicron_chipset __devinitconst = {
|
|
.name = DRV_NAME,
|
|
.enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
|
|
.port_ops = &jmicron_port_ops,
|
|
.pio_mask = ATA_PIO5,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
};
|
|
|
|
/**
|
|
* jmicron_init_one - pci layer discovery entry
|
|
* @dev: PCI device
|
|
* @id: ident table entry
|
|
*
|
|
* Called by the PCI code when it finds a Jmicron controller.
|
|
* We then use the IDE PCI generic helper to do most of the work.
|
|
*/
|
|
|
|
static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
return ide_pci_init_one(dev, &jmicron_chipset, NULL);
|
|
}
|
|
|
|
/* All JMB PATA controllers have and will continue to have the same
|
|
* interface. Matching vendor and device class is enough for all
|
|
* current and future controllers if the controller is programmed
|
|
* properly.
|
|
*
|
|
* If libata is configured, jmicron PCI quirk programs the controller
|
|
* into the correct mode. If libata isn't configured, match known
|
|
* device IDs too to maintain backward compatibility.
|
|
*/
|
|
static struct pci_device_id jmicron_pci_tbl[] = {
|
|
#if !defined(CONFIG_ATA) && !defined(CONFIG_ATA_MODULE)
|
|
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361) },
|
|
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363) },
|
|
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365) },
|
|
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366) },
|
|
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368) },
|
|
#endif
|
|
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 },
|
|
{ 0, },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl);
|
|
|
|
static struct pci_driver jmicron_pci_driver = {
|
|
.name = "JMicron IDE",
|
|
.id_table = jmicron_pci_tbl,
|
|
.probe = jmicron_init_one,
|
|
.remove = ide_pci_remove,
|
|
.suspend = ide_pci_suspend,
|
|
.resume = ide_pci_resume,
|
|
};
|
|
|
|
static int __init jmicron_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&jmicron_pci_driver);
|
|
}
|
|
|
|
static void __exit jmicron_ide_exit(void)
|
|
{
|
|
pci_unregister_driver(&jmicron_pci_driver);
|
|
}
|
|
|
|
module_init(jmicron_ide_init);
|
|
module_exit(jmicron_ide_exit);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("PCI driver module for the JMicron in legacy modes");
|
|
MODULE_LICENSE("GPL");
|