3719094ec2
* C_STARTING_SYNC_S, C_STARTING_SYNC_T In these states the bitmap gets written to disk. Locking out of app-IO is done by using the drbd_queue_bitmap_io() and drbd_bitmap_io() functions these days. It is no longer necessary to lock out app-IO based on the connection state. App-IO that may come in after the BITMAP_IO flag got cleared before the state transition to C_SYNC_(SOURCE|TARGET) does not get mirrored, sets a bit in the local bitmap, that is already set, therefore changes nothing. * C_WF_BITMAP_S In this state we send updates (P_OUT_OF_SYNC packets). With that we make sure they have the same number of bits when going into the C_SYNC_(SOURCE|TARGET) connection state. * C_UNCONNECTED: The receiver starts, no need to lock out IO. * C_DISCONNECTING: in drbd_disconnect() we had a wait_event() to wait until ap_bio_cnt reaches 0. Removed that. * C_TIMEOUT, C_BROKEN_PIPE, C_NETWORK_FAILURE C_PROTOCOL_ERROR, C_TEAR_DOWN: Same as C_DISCONNECTING * C_WF_REPORT_PARAMS: IO still possible since that is still like C_WF_CONNECTION. And we do not need to send barriers in C_WF_BITMAP_S connection state. Allow concurrent accesses to the bitmap when receiving the bitmap. Everything gets ORed anyways. A drbd_free_tl_hash() is in after_state_chg_work(). At that point all the work items of the last connections must have been processed. Introduced a call to drbd_free_tl_hash() into drbd_free_mdev() for paranoia reasons. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
1208 lines
37 KiB
C
1208 lines
37 KiB
C
/*
|
|
drbd_req.c
|
|
|
|
This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
|
|
|
|
Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
|
|
Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
|
|
Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
|
|
|
|
drbd is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2, or (at your option)
|
|
any later version.
|
|
|
|
drbd is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with drbd; see the file COPYING. If not, write to
|
|
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/drbd.h>
|
|
#include "drbd_int.h"
|
|
#include "drbd_req.h"
|
|
|
|
|
|
/* Update disk stats at start of I/O request */
|
|
static void _drbd_start_io_acct(struct drbd_conf *mdev, struct drbd_request *req, struct bio *bio)
|
|
{
|
|
const int rw = bio_data_dir(bio);
|
|
int cpu;
|
|
cpu = part_stat_lock();
|
|
part_stat_inc(cpu, &mdev->vdisk->part0, ios[rw]);
|
|
part_stat_add(cpu, &mdev->vdisk->part0, sectors[rw], bio_sectors(bio));
|
|
part_inc_in_flight(&mdev->vdisk->part0, rw);
|
|
part_stat_unlock();
|
|
}
|
|
|
|
/* Update disk stats when completing request upwards */
|
|
static void _drbd_end_io_acct(struct drbd_conf *mdev, struct drbd_request *req)
|
|
{
|
|
int rw = bio_data_dir(req->master_bio);
|
|
unsigned long duration = jiffies - req->start_time;
|
|
int cpu;
|
|
cpu = part_stat_lock();
|
|
part_stat_add(cpu, &mdev->vdisk->part0, ticks[rw], duration);
|
|
part_round_stats(cpu, &mdev->vdisk->part0);
|
|
part_dec_in_flight(&mdev->vdisk->part0, rw);
|
|
part_stat_unlock();
|
|
}
|
|
|
|
static void _req_is_done(struct drbd_conf *mdev, struct drbd_request *req, const int rw)
|
|
{
|
|
const unsigned long s = req->rq_state;
|
|
|
|
/* remove it from the transfer log.
|
|
* well, only if it had been there in the first
|
|
* place... if it had not (local only or conflicting
|
|
* and never sent), it should still be "empty" as
|
|
* initialized in drbd_req_new(), so we can list_del() it
|
|
* here unconditionally */
|
|
list_del(&req->tl_requests);
|
|
|
|
/* if it was a write, we may have to set the corresponding
|
|
* bit(s) out-of-sync first. If it had a local part, we need to
|
|
* release the reference to the activity log. */
|
|
if (rw == WRITE) {
|
|
/* Set out-of-sync unless both OK flags are set
|
|
* (local only or remote failed).
|
|
* Other places where we set out-of-sync:
|
|
* READ with local io-error */
|
|
if (!(s & RQ_NET_OK) || !(s & RQ_LOCAL_OK))
|
|
drbd_set_out_of_sync(mdev, req->sector, req->size);
|
|
|
|
if ((s & RQ_NET_OK) && (s & RQ_LOCAL_OK) && (s & RQ_NET_SIS))
|
|
drbd_set_in_sync(mdev, req->sector, req->size);
|
|
|
|
/* one might be tempted to move the drbd_al_complete_io
|
|
* to the local io completion callback drbd_endio_pri.
|
|
* but, if this was a mirror write, we may only
|
|
* drbd_al_complete_io after this is RQ_NET_DONE,
|
|
* otherwise the extent could be dropped from the al
|
|
* before it has actually been written on the peer.
|
|
* if we crash before our peer knows about the request,
|
|
* but after the extent has been dropped from the al,
|
|
* we would forget to resync the corresponding extent.
|
|
*/
|
|
if (s & RQ_LOCAL_MASK) {
|
|
if (get_ldev_if_state(mdev, D_FAILED)) {
|
|
if (s & RQ_IN_ACT_LOG)
|
|
drbd_al_complete_io(mdev, req->sector);
|
|
put_ldev(mdev);
|
|
} else if (__ratelimit(&drbd_ratelimit_state)) {
|
|
dev_warn(DEV, "Should have called drbd_al_complete_io(, %llu), "
|
|
"but my Disk seems to have failed :(\n",
|
|
(unsigned long long) req->sector);
|
|
}
|
|
}
|
|
}
|
|
|
|
drbd_req_free(req);
|
|
}
|
|
|
|
static void queue_barrier(struct drbd_conf *mdev)
|
|
{
|
|
struct drbd_tl_epoch *b;
|
|
|
|
/* We are within the req_lock. Once we queued the barrier for sending,
|
|
* we set the CREATE_BARRIER bit. It is cleared as soon as a new
|
|
* barrier/epoch object is added. This is the only place this bit is
|
|
* set. It indicates that the barrier for this epoch is already queued,
|
|
* and no new epoch has been created yet. */
|
|
if (test_bit(CREATE_BARRIER, &mdev->flags))
|
|
return;
|
|
|
|
b = mdev->newest_tle;
|
|
b->w.cb = w_send_barrier;
|
|
/* inc_ap_pending done here, so we won't
|
|
* get imbalanced on connection loss.
|
|
* dec_ap_pending will be done in got_BarrierAck
|
|
* or (on connection loss) in tl_clear. */
|
|
inc_ap_pending(mdev);
|
|
drbd_queue_work(&mdev->data.work, &b->w);
|
|
set_bit(CREATE_BARRIER, &mdev->flags);
|
|
}
|
|
|
|
static void _about_to_complete_local_write(struct drbd_conf *mdev,
|
|
struct drbd_request *req)
|
|
{
|
|
const unsigned long s = req->rq_state;
|
|
struct drbd_request *i;
|
|
struct drbd_epoch_entry *e;
|
|
struct hlist_node *n;
|
|
struct hlist_head *slot;
|
|
|
|
/* before we can signal completion to the upper layers,
|
|
* we may need to close the current epoch */
|
|
if (mdev->state.conn >= C_WF_BITMAP_T && mdev->state.conn < C_AHEAD &&
|
|
req->epoch == mdev->newest_tle->br_number)
|
|
queue_barrier(mdev);
|
|
|
|
/* we need to do the conflict detection stuff,
|
|
* if we have the ee_hash (two_primaries) and
|
|
* this has been on the network */
|
|
if ((s & RQ_NET_DONE) && mdev->ee_hash != NULL) {
|
|
const sector_t sector = req->sector;
|
|
const int size = req->size;
|
|
|
|
/* ASSERT:
|
|
* there must be no conflicting requests, since
|
|
* they must have been failed on the spot */
|
|
#define OVERLAPS overlaps(sector, size, i->sector, i->size)
|
|
slot = tl_hash_slot(mdev, sector);
|
|
hlist_for_each_entry(i, n, slot, colision) {
|
|
if (OVERLAPS) {
|
|
dev_alert(DEV, "LOGIC BUG: completed: %p %llus +%u; "
|
|
"other: %p %llus +%u\n",
|
|
req, (unsigned long long)sector, size,
|
|
i, (unsigned long long)i->sector, i->size);
|
|
}
|
|
}
|
|
|
|
/* maybe "wake" those conflicting epoch entries
|
|
* that wait for this request to finish.
|
|
*
|
|
* currently, there can be only _one_ such ee
|
|
* (well, or some more, which would be pending
|
|
* P_DISCARD_ACK not yet sent by the asender...),
|
|
* since we block the receiver thread upon the
|
|
* first conflict detection, which will wait on
|
|
* misc_wait. maybe we want to assert that?
|
|
*
|
|
* anyways, if we found one,
|
|
* we just have to do a wake_up. */
|
|
#undef OVERLAPS
|
|
#define OVERLAPS overlaps(sector, size, e->sector, e->size)
|
|
slot = ee_hash_slot(mdev, req->sector);
|
|
hlist_for_each_entry(e, n, slot, colision) {
|
|
if (OVERLAPS) {
|
|
wake_up(&mdev->misc_wait);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#undef OVERLAPS
|
|
}
|
|
|
|
void complete_master_bio(struct drbd_conf *mdev,
|
|
struct bio_and_error *m)
|
|
{
|
|
bio_endio(m->bio, m->error);
|
|
dec_ap_bio(mdev);
|
|
}
|
|
|
|
/* Helper for __req_mod().
|
|
* Set m->bio to the master bio, if it is fit to be completed,
|
|
* or leave it alone (it is initialized to NULL in __req_mod),
|
|
* if it has already been completed, or cannot be completed yet.
|
|
* If m->bio is set, the error status to be returned is placed in m->error.
|
|
*/
|
|
void _req_may_be_done(struct drbd_request *req, struct bio_and_error *m)
|
|
{
|
|
const unsigned long s = req->rq_state;
|
|
struct drbd_conf *mdev = req->mdev;
|
|
/* only WRITES may end up here without a master bio (on barrier ack) */
|
|
int rw = req->master_bio ? bio_data_dir(req->master_bio) : WRITE;
|
|
|
|
/* we must not complete the master bio, while it is
|
|
* still being processed by _drbd_send_zc_bio (drbd_send_dblock)
|
|
* not yet acknowledged by the peer
|
|
* not yet completed by the local io subsystem
|
|
* these flags may get cleared in any order by
|
|
* the worker,
|
|
* the receiver,
|
|
* the bio_endio completion callbacks.
|
|
*/
|
|
if (s & RQ_NET_QUEUED)
|
|
return;
|
|
if (s & RQ_NET_PENDING)
|
|
return;
|
|
if (s & RQ_LOCAL_PENDING)
|
|
return;
|
|
|
|
if (req->master_bio) {
|
|
/* this is data_received (remote read)
|
|
* or protocol C P_WRITE_ACK
|
|
* or protocol B P_RECV_ACK
|
|
* or protocol A "handed_over_to_network" (SendAck)
|
|
* or canceled or failed,
|
|
* or killed from the transfer log due to connection loss.
|
|
*/
|
|
|
|
/*
|
|
* figure out whether to report success or failure.
|
|
*
|
|
* report success when at least one of the operations succeeded.
|
|
* or, to put the other way,
|
|
* only report failure, when both operations failed.
|
|
*
|
|
* what to do about the failures is handled elsewhere.
|
|
* what we need to do here is just: complete the master_bio.
|
|
*
|
|
* local completion error, if any, has been stored as ERR_PTR
|
|
* in private_bio within drbd_endio_pri.
|
|
*/
|
|
int ok = (s & RQ_LOCAL_OK) || (s & RQ_NET_OK);
|
|
int error = PTR_ERR(req->private_bio);
|
|
|
|
/* remove the request from the conflict detection
|
|
* respective block_id verification hash */
|
|
if (!hlist_unhashed(&req->colision))
|
|
hlist_del(&req->colision);
|
|
else
|
|
D_ASSERT((s & (RQ_NET_MASK & ~RQ_NET_DONE)) == 0);
|
|
|
|
/* for writes we need to do some extra housekeeping */
|
|
if (rw == WRITE)
|
|
_about_to_complete_local_write(mdev, req);
|
|
|
|
/* Update disk stats */
|
|
_drbd_end_io_acct(mdev, req);
|
|
|
|
m->error = ok ? 0 : (error ?: -EIO);
|
|
m->bio = req->master_bio;
|
|
req->master_bio = NULL;
|
|
}
|
|
|
|
if ((s & RQ_NET_MASK) == 0 || (s & RQ_NET_DONE)) {
|
|
/* this is disconnected (local only) operation,
|
|
* or protocol C P_WRITE_ACK,
|
|
* or protocol A or B P_BARRIER_ACK,
|
|
* or killed from the transfer log due to connection loss. */
|
|
_req_is_done(mdev, req, rw);
|
|
}
|
|
/* else: network part and not DONE yet. that is
|
|
* protocol A or B, barrier ack still pending... */
|
|
}
|
|
|
|
static void _req_may_be_done_not_susp(struct drbd_request *req, struct bio_and_error *m)
|
|
{
|
|
struct drbd_conf *mdev = req->mdev;
|
|
|
|
if (!is_susp(mdev->state))
|
|
_req_may_be_done(req, m);
|
|
}
|
|
|
|
/*
|
|
* checks whether there was an overlapping request
|
|
* or ee already registered.
|
|
*
|
|
* if so, return 1, in which case this request is completed on the spot,
|
|
* without ever being submitted or send.
|
|
*
|
|
* return 0 if it is ok to submit this request.
|
|
*
|
|
* NOTE:
|
|
* paranoia: assume something above us is broken, and issues different write
|
|
* requests for the same block simultaneously...
|
|
*
|
|
* To ensure these won't be reordered differently on both nodes, resulting in
|
|
* diverging data sets, we discard the later one(s). Not that this is supposed
|
|
* to happen, but this is the rationale why we also have to check for
|
|
* conflicting requests with local origin, and why we have to do so regardless
|
|
* of whether we allowed multiple primaries.
|
|
*
|
|
* BTW, in case we only have one primary, the ee_hash is empty anyways, and the
|
|
* second hlist_for_each_entry becomes a noop. This is even simpler than to
|
|
* grab a reference on the net_conf, and check for the two_primaries flag...
|
|
*/
|
|
static int _req_conflicts(struct drbd_request *req)
|
|
{
|
|
struct drbd_conf *mdev = req->mdev;
|
|
const sector_t sector = req->sector;
|
|
const int size = req->size;
|
|
struct drbd_request *i;
|
|
struct drbd_epoch_entry *e;
|
|
struct hlist_node *n;
|
|
struct hlist_head *slot;
|
|
|
|
D_ASSERT(hlist_unhashed(&req->colision));
|
|
|
|
if (!get_net_conf(mdev))
|
|
return 0;
|
|
|
|
/* BUG_ON */
|
|
ERR_IF (mdev->tl_hash_s == 0)
|
|
goto out_no_conflict;
|
|
BUG_ON(mdev->tl_hash == NULL);
|
|
|
|
#define OVERLAPS overlaps(i->sector, i->size, sector, size)
|
|
slot = tl_hash_slot(mdev, sector);
|
|
hlist_for_each_entry(i, n, slot, colision) {
|
|
if (OVERLAPS) {
|
|
dev_alert(DEV, "%s[%u] Concurrent local write detected! "
|
|
"[DISCARD L] new: %llus +%u; "
|
|
"pending: %llus +%u\n",
|
|
current->comm, current->pid,
|
|
(unsigned long long)sector, size,
|
|
(unsigned long long)i->sector, i->size);
|
|
goto out_conflict;
|
|
}
|
|
}
|
|
|
|
if (mdev->ee_hash_s) {
|
|
/* now, check for overlapping requests with remote origin */
|
|
BUG_ON(mdev->ee_hash == NULL);
|
|
#undef OVERLAPS
|
|
#define OVERLAPS overlaps(e->sector, e->size, sector, size)
|
|
slot = ee_hash_slot(mdev, sector);
|
|
hlist_for_each_entry(e, n, slot, colision) {
|
|
if (OVERLAPS) {
|
|
dev_alert(DEV, "%s[%u] Concurrent remote write detected!"
|
|
" [DISCARD L] new: %llus +%u; "
|
|
"pending: %llus +%u\n",
|
|
current->comm, current->pid,
|
|
(unsigned long long)sector, size,
|
|
(unsigned long long)e->sector, e->size);
|
|
goto out_conflict;
|
|
}
|
|
}
|
|
}
|
|
#undef OVERLAPS
|
|
|
|
out_no_conflict:
|
|
/* this is like it should be, and what we expected.
|
|
* our users do behave after all... */
|
|
put_net_conf(mdev);
|
|
return 0;
|
|
|
|
out_conflict:
|
|
put_net_conf(mdev);
|
|
return 1;
|
|
}
|
|
|
|
/* obviously this could be coded as many single functions
|
|
* instead of one huge switch,
|
|
* or by putting the code directly in the respective locations
|
|
* (as it has been before).
|
|
*
|
|
* but having it this way
|
|
* enforces that it is all in this one place, where it is easier to audit,
|
|
* it makes it obvious that whatever "event" "happens" to a request should
|
|
* happen "atomically" within the req_lock,
|
|
* and it enforces that we have to think in a very structured manner
|
|
* about the "events" that may happen to a request during its life time ...
|
|
*/
|
|
int __req_mod(struct drbd_request *req, enum drbd_req_event what,
|
|
struct bio_and_error *m)
|
|
{
|
|
struct drbd_conf *mdev = req->mdev;
|
|
int rv = 0;
|
|
m->bio = NULL;
|
|
|
|
switch (what) {
|
|
default:
|
|
dev_err(DEV, "LOGIC BUG in %s:%u\n", __FILE__ , __LINE__);
|
|
break;
|
|
|
|
/* does not happen...
|
|
* initialization done in drbd_req_new
|
|
case created:
|
|
break;
|
|
*/
|
|
|
|
case to_be_send: /* via network */
|
|
/* reached via drbd_make_request_common
|
|
* and from w_read_retry_remote */
|
|
D_ASSERT(!(req->rq_state & RQ_NET_MASK));
|
|
req->rq_state |= RQ_NET_PENDING;
|
|
inc_ap_pending(mdev);
|
|
break;
|
|
|
|
case to_be_submitted: /* locally */
|
|
/* reached via drbd_make_request_common */
|
|
D_ASSERT(!(req->rq_state & RQ_LOCAL_MASK));
|
|
req->rq_state |= RQ_LOCAL_PENDING;
|
|
break;
|
|
|
|
case completed_ok:
|
|
if (bio_data_dir(req->master_bio) == WRITE)
|
|
mdev->writ_cnt += req->size>>9;
|
|
else
|
|
mdev->read_cnt += req->size>>9;
|
|
|
|
req->rq_state |= (RQ_LOCAL_COMPLETED|RQ_LOCAL_OK);
|
|
req->rq_state &= ~RQ_LOCAL_PENDING;
|
|
|
|
_req_may_be_done_not_susp(req, m);
|
|
put_ldev(mdev);
|
|
break;
|
|
|
|
case write_completed_with_error:
|
|
req->rq_state |= RQ_LOCAL_COMPLETED;
|
|
req->rq_state &= ~RQ_LOCAL_PENDING;
|
|
|
|
__drbd_chk_io_error(mdev, FALSE);
|
|
_req_may_be_done_not_susp(req, m);
|
|
put_ldev(mdev);
|
|
break;
|
|
|
|
case read_ahead_completed_with_error:
|
|
/* it is legal to fail READA */
|
|
req->rq_state |= RQ_LOCAL_COMPLETED;
|
|
req->rq_state &= ~RQ_LOCAL_PENDING;
|
|
_req_may_be_done_not_susp(req, m);
|
|
put_ldev(mdev);
|
|
break;
|
|
|
|
case read_completed_with_error:
|
|
drbd_set_out_of_sync(mdev, req->sector, req->size);
|
|
|
|
req->rq_state |= RQ_LOCAL_COMPLETED;
|
|
req->rq_state &= ~RQ_LOCAL_PENDING;
|
|
|
|
D_ASSERT(!(req->rq_state & RQ_NET_MASK));
|
|
|
|
__drbd_chk_io_error(mdev, FALSE);
|
|
put_ldev(mdev);
|
|
|
|
/* no point in retrying if there is no good remote data,
|
|
* or we have no connection. */
|
|
if (mdev->state.pdsk != D_UP_TO_DATE) {
|
|
_req_may_be_done_not_susp(req, m);
|
|
break;
|
|
}
|
|
|
|
/* _req_mod(req,to_be_send); oops, recursion... */
|
|
req->rq_state |= RQ_NET_PENDING;
|
|
inc_ap_pending(mdev);
|
|
/* fall through: _req_mod(req,queue_for_net_read); */
|
|
|
|
case queue_for_net_read:
|
|
/* READ or READA, and
|
|
* no local disk,
|
|
* or target area marked as invalid,
|
|
* or just got an io-error. */
|
|
/* from drbd_make_request_common
|
|
* or from bio_endio during read io-error recovery */
|
|
|
|
/* so we can verify the handle in the answer packet
|
|
* corresponding hlist_del is in _req_may_be_done() */
|
|
hlist_add_head(&req->colision, ar_hash_slot(mdev, req->sector));
|
|
|
|
set_bit(UNPLUG_REMOTE, &mdev->flags);
|
|
|
|
D_ASSERT(req->rq_state & RQ_NET_PENDING);
|
|
req->rq_state |= RQ_NET_QUEUED;
|
|
req->w.cb = (req->rq_state & RQ_LOCAL_MASK)
|
|
? w_read_retry_remote
|
|
: w_send_read_req;
|
|
drbd_queue_work(&mdev->data.work, &req->w);
|
|
break;
|
|
|
|
case queue_for_net_write:
|
|
/* assert something? */
|
|
/* from drbd_make_request_common only */
|
|
|
|
hlist_add_head(&req->colision, tl_hash_slot(mdev, req->sector));
|
|
/* corresponding hlist_del is in _req_may_be_done() */
|
|
|
|
/* NOTE
|
|
* In case the req ended up on the transfer log before being
|
|
* queued on the worker, it could lead to this request being
|
|
* missed during cleanup after connection loss.
|
|
* So we have to do both operations here,
|
|
* within the same lock that protects the transfer log.
|
|
*
|
|
* _req_add_to_epoch(req); this has to be after the
|
|
* _maybe_start_new_epoch(req); which happened in
|
|
* drbd_make_request_common, because we now may set the bit
|
|
* again ourselves to close the current epoch.
|
|
*
|
|
* Add req to the (now) current epoch (barrier). */
|
|
|
|
/* otherwise we may lose an unplug, which may cause some remote
|
|
* io-scheduler timeout to expire, increasing maximum latency,
|
|
* hurting performance. */
|
|
set_bit(UNPLUG_REMOTE, &mdev->flags);
|
|
|
|
/* see drbd_make_request_common,
|
|
* just after it grabs the req_lock */
|
|
D_ASSERT(test_bit(CREATE_BARRIER, &mdev->flags) == 0);
|
|
|
|
req->epoch = mdev->newest_tle->br_number;
|
|
|
|
/* increment size of current epoch */
|
|
mdev->newest_tle->n_writes++;
|
|
|
|
/* queue work item to send data */
|
|
D_ASSERT(req->rq_state & RQ_NET_PENDING);
|
|
req->rq_state |= RQ_NET_QUEUED;
|
|
req->w.cb = w_send_dblock;
|
|
drbd_queue_work(&mdev->data.work, &req->w);
|
|
|
|
/* close the epoch, in case it outgrew the limit */
|
|
if (mdev->newest_tle->n_writes >= mdev->net_conf->max_epoch_size)
|
|
queue_barrier(mdev);
|
|
|
|
break;
|
|
|
|
case queue_for_send_oos:
|
|
req->rq_state |= RQ_NET_QUEUED;
|
|
req->w.cb = w_send_oos;
|
|
drbd_queue_work(&mdev->data.work, &req->w);
|
|
break;
|
|
|
|
case oos_handed_to_network:
|
|
/* actually the same */
|
|
case send_canceled:
|
|
/* treat it the same */
|
|
case send_failed:
|
|
/* real cleanup will be done from tl_clear. just update flags
|
|
* so it is no longer marked as on the worker queue */
|
|
req->rq_state &= ~RQ_NET_QUEUED;
|
|
/* if we did it right, tl_clear should be scheduled only after
|
|
* this, so this should not be necessary! */
|
|
_req_may_be_done_not_susp(req, m);
|
|
break;
|
|
|
|
case handed_over_to_network:
|
|
/* assert something? */
|
|
if (bio_data_dir(req->master_bio) == WRITE)
|
|
atomic_add(req->size>>9, &mdev->ap_in_flight);
|
|
|
|
if (bio_data_dir(req->master_bio) == WRITE &&
|
|
mdev->net_conf->wire_protocol == DRBD_PROT_A) {
|
|
/* this is what is dangerous about protocol A:
|
|
* pretend it was successfully written on the peer. */
|
|
if (req->rq_state & RQ_NET_PENDING) {
|
|
dec_ap_pending(mdev);
|
|
req->rq_state &= ~RQ_NET_PENDING;
|
|
req->rq_state |= RQ_NET_OK;
|
|
} /* else: neg-ack was faster... */
|
|
/* it is still not yet RQ_NET_DONE until the
|
|
* corresponding epoch barrier got acked as well,
|
|
* so we know what to dirty on connection loss */
|
|
}
|
|
req->rq_state &= ~RQ_NET_QUEUED;
|
|
req->rq_state |= RQ_NET_SENT;
|
|
/* because _drbd_send_zc_bio could sleep, and may want to
|
|
* dereference the bio even after the "write_acked_by_peer" and
|
|
* "completed_ok" events came in, once we return from
|
|
* _drbd_send_zc_bio (drbd_send_dblock), we have to check
|
|
* whether it is done already, and end it. */
|
|
_req_may_be_done_not_susp(req, m);
|
|
break;
|
|
|
|
case read_retry_remote_canceled:
|
|
req->rq_state &= ~RQ_NET_QUEUED;
|
|
/* fall through, in case we raced with drbd_disconnect */
|
|
case connection_lost_while_pending:
|
|
/* transfer log cleanup after connection loss */
|
|
/* assert something? */
|
|
if (req->rq_state & RQ_NET_PENDING)
|
|
dec_ap_pending(mdev);
|
|
req->rq_state &= ~(RQ_NET_OK|RQ_NET_PENDING);
|
|
req->rq_state |= RQ_NET_DONE;
|
|
if (req->rq_state & RQ_NET_SENT && req->rq_state & RQ_WRITE)
|
|
atomic_sub(req->size>>9, &mdev->ap_in_flight);
|
|
|
|
/* if it is still queued, we may not complete it here.
|
|
* it will be canceled soon. */
|
|
if (!(req->rq_state & RQ_NET_QUEUED))
|
|
_req_may_be_done(req, m); /* Allowed while state.susp */
|
|
break;
|
|
|
|
case write_acked_by_peer_and_sis:
|
|
req->rq_state |= RQ_NET_SIS;
|
|
case conflict_discarded_by_peer:
|
|
/* for discarded conflicting writes of multiple primaries,
|
|
* there is no need to keep anything in the tl, potential
|
|
* node crashes are covered by the activity log. */
|
|
if (what == conflict_discarded_by_peer)
|
|
dev_alert(DEV, "Got DiscardAck packet %llus +%u!"
|
|
" DRBD is not a random data generator!\n",
|
|
(unsigned long long)req->sector, req->size);
|
|
req->rq_state |= RQ_NET_DONE;
|
|
/* fall through */
|
|
case write_acked_by_peer:
|
|
/* protocol C; successfully written on peer.
|
|
* Nothing to do here.
|
|
* We want to keep the tl in place for all protocols, to cater
|
|
* for volatile write-back caches on lower level devices.
|
|
*
|
|
* A barrier request is expected to have forced all prior
|
|
* requests onto stable storage, so completion of a barrier
|
|
* request could set NET_DONE right here, and not wait for the
|
|
* P_BARRIER_ACK, but that is an unnecessary optimization. */
|
|
|
|
/* this makes it effectively the same as for: */
|
|
case recv_acked_by_peer:
|
|
/* protocol B; pretends to be successfully written on peer.
|
|
* see also notes above in handed_over_to_network about
|
|
* protocol != C */
|
|
req->rq_state |= RQ_NET_OK;
|
|
D_ASSERT(req->rq_state & RQ_NET_PENDING);
|
|
dec_ap_pending(mdev);
|
|
atomic_sub(req->size>>9, &mdev->ap_in_flight);
|
|
req->rq_state &= ~RQ_NET_PENDING;
|
|
_req_may_be_done_not_susp(req, m);
|
|
break;
|
|
|
|
case neg_acked:
|
|
/* assert something? */
|
|
if (req->rq_state & RQ_NET_PENDING) {
|
|
dec_ap_pending(mdev);
|
|
atomic_sub(req->size>>9, &mdev->ap_in_flight);
|
|
}
|
|
req->rq_state &= ~(RQ_NET_OK|RQ_NET_PENDING);
|
|
|
|
req->rq_state |= RQ_NET_DONE;
|
|
_req_may_be_done_not_susp(req, m);
|
|
/* else: done by handed_over_to_network */
|
|
break;
|
|
|
|
case fail_frozen_disk_io:
|
|
if (!(req->rq_state & RQ_LOCAL_COMPLETED))
|
|
break;
|
|
|
|
_req_may_be_done(req, m); /* Allowed while state.susp */
|
|
break;
|
|
|
|
case restart_frozen_disk_io:
|
|
if (!(req->rq_state & RQ_LOCAL_COMPLETED))
|
|
break;
|
|
|
|
req->rq_state &= ~RQ_LOCAL_COMPLETED;
|
|
|
|
rv = MR_READ;
|
|
if (bio_data_dir(req->master_bio) == WRITE)
|
|
rv = MR_WRITE;
|
|
|
|
get_ldev(mdev);
|
|
req->w.cb = w_restart_disk_io;
|
|
drbd_queue_work(&mdev->data.work, &req->w);
|
|
break;
|
|
|
|
case resend:
|
|
/* If RQ_NET_OK is already set, we got a P_WRITE_ACK or P_RECV_ACK
|
|
before the connection loss (B&C only); only P_BARRIER_ACK was missing.
|
|
Trowing them out of the TL here by pretending we got a BARRIER_ACK
|
|
We ensure that the peer was not rebooted */
|
|
if (!(req->rq_state & RQ_NET_OK)) {
|
|
if (req->w.cb) {
|
|
drbd_queue_work(&mdev->data.work, &req->w);
|
|
rv = req->rq_state & RQ_WRITE ? MR_WRITE : MR_READ;
|
|
}
|
|
break;
|
|
}
|
|
/* else, fall through to barrier_acked */
|
|
|
|
case barrier_acked:
|
|
if (!(req->rq_state & RQ_WRITE))
|
|
break;
|
|
|
|
if (req->rq_state & RQ_NET_PENDING) {
|
|
/* barrier came in before all requests have been acked.
|
|
* this is bad, because if the connection is lost now,
|
|
* we won't be able to clean them up... */
|
|
dev_err(DEV, "FIXME (barrier_acked but pending)\n");
|
|
list_move(&req->tl_requests, &mdev->out_of_sequence_requests);
|
|
}
|
|
D_ASSERT(req->rq_state & RQ_NET_SENT);
|
|
req->rq_state |= RQ_NET_DONE;
|
|
if (mdev->net_conf->wire_protocol == DRBD_PROT_A)
|
|
atomic_sub(req->size>>9, &mdev->ap_in_flight);
|
|
_req_may_be_done(req, m); /* Allowed while state.susp */
|
|
break;
|
|
|
|
case data_received:
|
|
D_ASSERT(req->rq_state & RQ_NET_PENDING);
|
|
dec_ap_pending(mdev);
|
|
req->rq_state &= ~RQ_NET_PENDING;
|
|
req->rq_state |= (RQ_NET_OK|RQ_NET_DONE);
|
|
_req_may_be_done_not_susp(req, m);
|
|
break;
|
|
};
|
|
|
|
return rv;
|
|
}
|
|
|
|
/* we may do a local read if:
|
|
* - we are consistent (of course),
|
|
* - or we are generally inconsistent,
|
|
* BUT we are still/already IN SYNC for this area.
|
|
* since size may be bigger than BM_BLOCK_SIZE,
|
|
* we may need to check several bits.
|
|
*/
|
|
static int drbd_may_do_local_read(struct drbd_conf *mdev, sector_t sector, int size)
|
|
{
|
|
unsigned long sbnr, ebnr;
|
|
sector_t esector, nr_sectors;
|
|
|
|
if (mdev->state.disk == D_UP_TO_DATE)
|
|
return 1;
|
|
if (mdev->state.disk >= D_OUTDATED)
|
|
return 0;
|
|
if (mdev->state.disk < D_INCONSISTENT)
|
|
return 0;
|
|
/* state.disk == D_INCONSISTENT We will have a look at the BitMap */
|
|
nr_sectors = drbd_get_capacity(mdev->this_bdev);
|
|
esector = sector + (size >> 9) - 1;
|
|
|
|
D_ASSERT(sector < nr_sectors);
|
|
D_ASSERT(esector < nr_sectors);
|
|
|
|
sbnr = BM_SECT_TO_BIT(sector);
|
|
ebnr = BM_SECT_TO_BIT(esector);
|
|
|
|
return 0 == drbd_bm_count_bits(mdev, sbnr, ebnr);
|
|
}
|
|
|
|
static int drbd_should_do_remote(struct drbd_conf *mdev)
|
|
{
|
|
union drbd_state s = mdev->state;
|
|
|
|
return s.pdsk == D_UP_TO_DATE ||
|
|
(s.pdsk >= D_INCONSISTENT &&
|
|
s.conn >= C_WF_BITMAP_T &&
|
|
s.conn < C_AHEAD);
|
|
}
|
|
static int drbd_should_send_oos(struct drbd_conf *mdev)
|
|
{
|
|
union drbd_state s = mdev->state;
|
|
|
|
return s.pdsk >= D_INCONSISTENT &&
|
|
(s.conn == C_AHEAD || s.conn == C_WF_BITMAP_S);
|
|
}
|
|
|
|
static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, unsigned long start_time)
|
|
{
|
|
const int rw = bio_rw(bio);
|
|
const int size = bio->bi_size;
|
|
const sector_t sector = bio->bi_sector;
|
|
struct drbd_tl_epoch *b = NULL;
|
|
struct drbd_request *req;
|
|
int local, remote, send_oos = 0;
|
|
int err = -EIO;
|
|
int ret = 0;
|
|
|
|
/* allocate outside of all locks; */
|
|
req = drbd_req_new(mdev, bio);
|
|
if (!req) {
|
|
dec_ap_bio(mdev);
|
|
/* only pass the error to the upper layers.
|
|
* if user cannot handle io errors, that's not our business. */
|
|
dev_err(DEV, "could not kmalloc() req\n");
|
|
bio_endio(bio, -ENOMEM);
|
|
return 0;
|
|
}
|
|
req->start_time = start_time;
|
|
|
|
local = get_ldev(mdev);
|
|
if (!local) {
|
|
bio_put(req->private_bio); /* or we get a bio leak */
|
|
req->private_bio = NULL;
|
|
}
|
|
if (rw == WRITE) {
|
|
remote = 1;
|
|
} else {
|
|
/* READ || READA */
|
|
if (local) {
|
|
if (!drbd_may_do_local_read(mdev, sector, size)) {
|
|
/* we could kick the syncer to
|
|
* sync this extent asap, wait for
|
|
* it, then continue locally.
|
|
* Or just issue the request remotely.
|
|
*/
|
|
local = 0;
|
|
bio_put(req->private_bio);
|
|
req->private_bio = NULL;
|
|
put_ldev(mdev);
|
|
}
|
|
}
|
|
remote = !local && mdev->state.pdsk >= D_UP_TO_DATE;
|
|
}
|
|
|
|
/* If we have a disk, but a READA request is mapped to remote,
|
|
* we are R_PRIMARY, D_INCONSISTENT, SyncTarget.
|
|
* Just fail that READA request right here.
|
|
*
|
|
* THINK: maybe fail all READA when not local?
|
|
* or make this configurable...
|
|
* if network is slow, READA won't do any good.
|
|
*/
|
|
if (rw == READA && mdev->state.disk >= D_INCONSISTENT && !local) {
|
|
err = -EWOULDBLOCK;
|
|
goto fail_and_free_req;
|
|
}
|
|
|
|
/* For WRITES going to the local disk, grab a reference on the target
|
|
* extent. This waits for any resync activity in the corresponding
|
|
* resync extent to finish, and, if necessary, pulls in the target
|
|
* extent into the activity log, which involves further disk io because
|
|
* of transactional on-disk meta data updates. */
|
|
if (rw == WRITE && local && !test_bit(AL_SUSPENDED, &mdev->flags)) {
|
|
req->rq_state |= RQ_IN_ACT_LOG;
|
|
drbd_al_begin_io(mdev, sector);
|
|
}
|
|
|
|
remote = remote && drbd_should_do_remote(mdev);
|
|
send_oos = rw == WRITE && drbd_should_send_oos(mdev);
|
|
D_ASSERT(!(remote && send_oos));
|
|
|
|
if (!(local || remote) && !is_susp(mdev->state)) {
|
|
if (__ratelimit(&drbd_ratelimit_state))
|
|
dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
|
|
goto fail_free_complete;
|
|
}
|
|
|
|
/* For WRITE request, we have to make sure that we have an
|
|
* unused_spare_tle, in case we need to start a new epoch.
|
|
* I try to be smart and avoid to pre-allocate always "just in case",
|
|
* but there is a race between testing the bit and pointer outside the
|
|
* spinlock, and grabbing the spinlock.
|
|
* if we lost that race, we retry. */
|
|
if (rw == WRITE && (remote || send_oos) &&
|
|
mdev->unused_spare_tle == NULL &&
|
|
test_bit(CREATE_BARRIER, &mdev->flags)) {
|
|
allocate_barrier:
|
|
b = kmalloc(sizeof(struct drbd_tl_epoch), GFP_NOIO);
|
|
if (!b) {
|
|
dev_err(DEV, "Failed to alloc barrier.\n");
|
|
err = -ENOMEM;
|
|
goto fail_free_complete;
|
|
}
|
|
}
|
|
|
|
/* GOOD, everything prepared, grab the spin_lock */
|
|
spin_lock_irq(&mdev->req_lock);
|
|
|
|
if (is_susp(mdev->state)) {
|
|
/* If we got suspended, use the retry mechanism of
|
|
generic_make_request() to restart processing of this
|
|
bio. In the next call to drbd_make_request_26
|
|
we sleep in inc_ap_bio() */
|
|
ret = 1;
|
|
spin_unlock_irq(&mdev->req_lock);
|
|
goto fail_free_complete;
|
|
}
|
|
|
|
if (remote || send_oos) {
|
|
remote = drbd_should_do_remote(mdev);
|
|
send_oos = rw == WRITE && drbd_should_send_oos(mdev);
|
|
D_ASSERT(!(remote && send_oos));
|
|
|
|
if (!(remote || send_oos))
|
|
dev_warn(DEV, "lost connection while grabbing the req_lock!\n");
|
|
if (!(local || remote)) {
|
|
dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
|
|
spin_unlock_irq(&mdev->req_lock);
|
|
goto fail_free_complete;
|
|
}
|
|
}
|
|
|
|
if (b && mdev->unused_spare_tle == NULL) {
|
|
mdev->unused_spare_tle = b;
|
|
b = NULL;
|
|
}
|
|
if (rw == WRITE && (remote || send_oos) &&
|
|
mdev->unused_spare_tle == NULL &&
|
|
test_bit(CREATE_BARRIER, &mdev->flags)) {
|
|
/* someone closed the current epoch
|
|
* while we were grabbing the spinlock */
|
|
spin_unlock_irq(&mdev->req_lock);
|
|
goto allocate_barrier;
|
|
}
|
|
|
|
|
|
/* Update disk stats */
|
|
_drbd_start_io_acct(mdev, req, bio);
|
|
|
|
/* _maybe_start_new_epoch(mdev);
|
|
* If we need to generate a write barrier packet, we have to add the
|
|
* new epoch (barrier) object, and queue the barrier packet for sending,
|
|
* and queue the req's data after it _within the same lock_, otherwise
|
|
* we have race conditions were the reorder domains could be mixed up.
|
|
*
|
|
* Even read requests may start a new epoch and queue the corresponding
|
|
* barrier packet. To get the write ordering right, we only have to
|
|
* make sure that, if this is a write request and it triggered a
|
|
* barrier packet, this request is queued within the same spinlock. */
|
|
if ((remote || send_oos) && mdev->unused_spare_tle &&
|
|
test_and_clear_bit(CREATE_BARRIER, &mdev->flags)) {
|
|
_tl_add_barrier(mdev, mdev->unused_spare_tle);
|
|
mdev->unused_spare_tle = NULL;
|
|
} else {
|
|
D_ASSERT(!(remote && rw == WRITE &&
|
|
test_bit(CREATE_BARRIER, &mdev->flags)));
|
|
}
|
|
|
|
/* NOTE
|
|
* Actually, 'local' may be wrong here already, since we may have failed
|
|
* to write to the meta data, and may become wrong anytime because of
|
|
* local io-error for some other request, which would lead to us
|
|
* "detaching" the local disk.
|
|
*
|
|
* 'remote' may become wrong any time because the network could fail.
|
|
*
|
|
* This is a harmless race condition, though, since it is handled
|
|
* correctly at the appropriate places; so it just defers the failure
|
|
* of the respective operation.
|
|
*/
|
|
|
|
/* mark them early for readability.
|
|
* this just sets some state flags. */
|
|
if (remote)
|
|
_req_mod(req, to_be_send);
|
|
if (local)
|
|
_req_mod(req, to_be_submitted);
|
|
|
|
/* check this request on the collision detection hash tables.
|
|
* if we have a conflict, just complete it here.
|
|
* THINK do we want to check reads, too? (I don't think so...) */
|
|
if (rw == WRITE && _req_conflicts(req))
|
|
goto fail_conflicting;
|
|
|
|
list_add_tail(&req->tl_requests, &mdev->newest_tle->requests);
|
|
|
|
/* NOTE remote first: to get the concurrent write detection right,
|
|
* we must register the request before start of local IO. */
|
|
if (remote) {
|
|
/* either WRITE and C_CONNECTED,
|
|
* or READ, and no local disk,
|
|
* or READ, but not in sync.
|
|
*/
|
|
_req_mod(req, (rw == WRITE)
|
|
? queue_for_net_write
|
|
: queue_for_net_read);
|
|
}
|
|
if (send_oos && drbd_set_out_of_sync(mdev, sector, size))
|
|
_req_mod(req, queue_for_send_oos);
|
|
|
|
if (remote &&
|
|
mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) {
|
|
int congested = 0;
|
|
|
|
if (mdev->net_conf->cong_fill &&
|
|
atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
|
|
dev_info(DEV, "Congestion-fill threshold reached\n");
|
|
congested = 1;
|
|
}
|
|
|
|
if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
|
|
dev_info(DEV, "Congestion-extents threshold reached\n");
|
|
congested = 1;
|
|
}
|
|
|
|
if (congested) {
|
|
queue_barrier(mdev);
|
|
|
|
if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
|
|
_drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
|
|
else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
|
|
_drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irq(&mdev->req_lock);
|
|
kfree(b); /* if someone else has beaten us to it... */
|
|
|
|
if (local) {
|
|
req->private_bio->bi_bdev = mdev->ldev->backing_bdev;
|
|
|
|
/* State may have changed since we grabbed our reference on the
|
|
* mdev->ldev member. Double check, and short-circuit to endio.
|
|
* In case the last activity log transaction failed to get on
|
|
* stable storage, and this is a WRITE, we may not even submit
|
|
* this bio. */
|
|
if (get_ldev(mdev)) {
|
|
if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
|
|
: rw == READ ? DRBD_FAULT_DT_RD
|
|
: DRBD_FAULT_DT_RA))
|
|
bio_endio(req->private_bio, -EIO);
|
|
else
|
|
generic_make_request(req->private_bio);
|
|
put_ldev(mdev);
|
|
} else
|
|
bio_endio(req->private_bio, -EIO);
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_conflicting:
|
|
/* this is a conflicting request.
|
|
* even though it may have been only _partially_
|
|
* overlapping with one of the currently pending requests,
|
|
* without even submitting or sending it, we will
|
|
* pretend that it was successfully served right now.
|
|
*/
|
|
_drbd_end_io_acct(mdev, req);
|
|
spin_unlock_irq(&mdev->req_lock);
|
|
if (remote)
|
|
dec_ap_pending(mdev);
|
|
/* THINK: do we want to fail it (-EIO), or pretend success?
|
|
* this pretends success. */
|
|
err = 0;
|
|
|
|
fail_free_complete:
|
|
if (rw == WRITE && local)
|
|
drbd_al_complete_io(mdev, sector);
|
|
fail_and_free_req:
|
|
if (local) {
|
|
bio_put(req->private_bio);
|
|
req->private_bio = NULL;
|
|
put_ldev(mdev);
|
|
}
|
|
if (!ret)
|
|
bio_endio(bio, err);
|
|
|
|
drbd_req_free(req);
|
|
dec_ap_bio(mdev);
|
|
kfree(b);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* helper function for drbd_make_request
|
|
* if we can determine just by the mdev (state) that this request will fail,
|
|
* return 1
|
|
* otherwise return 0
|
|
*/
|
|
static int drbd_fail_request_early(struct drbd_conf *mdev, int is_write)
|
|
{
|
|
if (mdev->state.role != R_PRIMARY &&
|
|
(!allow_oos || is_write)) {
|
|
if (__ratelimit(&drbd_ratelimit_state)) {
|
|
dev_err(DEV, "Process %s[%u] tried to %s; "
|
|
"since we are not in Primary state, "
|
|
"we cannot allow this\n",
|
|
current->comm, current->pid,
|
|
is_write ? "WRITE" : "READ");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int drbd_make_request_26(struct request_queue *q, struct bio *bio)
|
|
{
|
|
unsigned int s_enr, e_enr;
|
|
struct drbd_conf *mdev = (struct drbd_conf *) q->queuedata;
|
|
unsigned long start_time;
|
|
|
|
if (drbd_fail_request_early(mdev, bio_data_dir(bio) & WRITE)) {
|
|
bio_endio(bio, -EPERM);
|
|
return 0;
|
|
}
|
|
|
|
start_time = jiffies;
|
|
|
|
/*
|
|
* what we "blindly" assume:
|
|
*/
|
|
D_ASSERT(bio->bi_size > 0);
|
|
D_ASSERT((bio->bi_size & 0x1ff) == 0);
|
|
D_ASSERT(bio->bi_idx == 0);
|
|
|
|
/* to make some things easier, force alignment of requests within the
|
|
* granularity of our hash tables */
|
|
s_enr = bio->bi_sector >> HT_SHIFT;
|
|
e_enr = (bio->bi_sector+(bio->bi_size>>9)-1) >> HT_SHIFT;
|
|
|
|
if (likely(s_enr == e_enr)) {
|
|
inc_ap_bio(mdev, 1);
|
|
return drbd_make_request_common(mdev, bio, start_time);
|
|
}
|
|
|
|
/* can this bio be split generically?
|
|
* Maybe add our own split-arbitrary-bios function. */
|
|
if (bio->bi_vcnt != 1 || bio->bi_idx != 0 || bio->bi_size > DRBD_MAX_BIO_SIZE) {
|
|
/* rather error out here than BUG in bio_split */
|
|
dev_err(DEV, "bio would need to, but cannot, be split: "
|
|
"(vcnt=%u,idx=%u,size=%u,sector=%llu)\n",
|
|
bio->bi_vcnt, bio->bi_idx, bio->bi_size,
|
|
(unsigned long long)bio->bi_sector);
|
|
bio_endio(bio, -EINVAL);
|
|
} else {
|
|
/* This bio crosses some boundary, so we have to split it. */
|
|
struct bio_pair *bp;
|
|
/* works for the "do not cross hash slot boundaries" case
|
|
* e.g. sector 262269, size 4096
|
|
* s_enr = 262269 >> 6 = 4097
|
|
* e_enr = (262269+8-1) >> 6 = 4098
|
|
* HT_SHIFT = 6
|
|
* sps = 64, mask = 63
|
|
* first_sectors = 64 - (262269 & 63) = 3
|
|
*/
|
|
const sector_t sect = bio->bi_sector;
|
|
const int sps = 1 << HT_SHIFT; /* sectors per slot */
|
|
const int mask = sps - 1;
|
|
const sector_t first_sectors = sps - (sect & mask);
|
|
bp = bio_split(bio,
|
|
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
|
|
bio_split_pool,
|
|
#endif
|
|
first_sectors);
|
|
|
|
/* we need to get a "reference count" (ap_bio_cnt)
|
|
* to avoid races with the disconnect/reconnect/suspend code.
|
|
* In case we need to split the bio here, we need to get three references
|
|
* atomically, otherwise we might deadlock when trying to submit the
|
|
* second one! */
|
|
inc_ap_bio(mdev, 3);
|
|
|
|
D_ASSERT(e_enr == s_enr + 1);
|
|
|
|
while (drbd_make_request_common(mdev, &bp->bio1, start_time))
|
|
inc_ap_bio(mdev, 1);
|
|
|
|
while (drbd_make_request_common(mdev, &bp->bio2, start_time))
|
|
inc_ap_bio(mdev, 1);
|
|
|
|
dec_ap_bio(mdev);
|
|
|
|
bio_pair_release(bp);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* This is called by bio_add_page(). With this function we reduce
|
|
* the number of BIOs that span over multiple DRBD_MAX_BIO_SIZEs
|
|
* units (was AL_EXTENTs).
|
|
*
|
|
* we do the calculation within the lower 32bit of the byte offsets,
|
|
* since we don't care for actual offset, but only check whether it
|
|
* would cross "activity log extent" boundaries.
|
|
*
|
|
* As long as the BIO is empty we have to allow at least one bvec,
|
|
* regardless of size and offset. so the resulting bio may still
|
|
* cross extent boundaries. those are dealt with (bio_split) in
|
|
* drbd_make_request_26.
|
|
*/
|
|
int drbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bvm, struct bio_vec *bvec)
|
|
{
|
|
struct drbd_conf *mdev = (struct drbd_conf *) q->queuedata;
|
|
unsigned int bio_offset =
|
|
(unsigned int)bvm->bi_sector << 9; /* 32 bit */
|
|
unsigned int bio_size = bvm->bi_size;
|
|
int limit, backing_limit;
|
|
|
|
limit = DRBD_MAX_BIO_SIZE
|
|
- ((bio_offset & (DRBD_MAX_BIO_SIZE-1)) + bio_size);
|
|
if (limit < 0)
|
|
limit = 0;
|
|
if (bio_size == 0) {
|
|
if (limit <= bvec->bv_len)
|
|
limit = bvec->bv_len;
|
|
} else if (limit && get_ldev(mdev)) {
|
|
struct request_queue * const b =
|
|
mdev->ldev->backing_bdev->bd_disk->queue;
|
|
if (b->merge_bvec_fn) {
|
|
backing_limit = b->merge_bvec_fn(b, bvm, bvec);
|
|
limit = min(limit, backing_limit);
|
|
}
|
|
put_ldev(mdev);
|
|
}
|
|
return limit;
|
|
}
|