OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
c63cb468f3
linux/drivers/bcma/driver_mips.c
Hauke Mehrtens d8f1bd2ffc bcma: fix regression in interrupt assignment on mips 
The wrong interrupts where assigned to the cores in
bcma_core_mips_init(). This caused at least my serial console not to
response to any input.

This was caused by this patch which changed the order of the cores in
the list:
commit c334e25c9f
Author: Rafał Miłecki <zajec5@gmail.com>
Date:   Wed Jul 11 12:37:00 2012 +0200

    bcma: add new cores at the end of list

This should be fixed properly later so that the correct interrupt
numbers are assigned to the cores independently from the ordering of
the list. This patch restores the old behavior again. I will look into
the problem more deeply later.

I also changed the order of the list with the cores and their assigned
interrupt number which gets printed to the log. Now they are printed in
the same order like all the other lists of cores and like it was done
before the patch which changed the order.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-26 15:37:57 -04:00

266 lines
6.6 KiB
C
Raw Blame History

/*
* Broadcom specific AMBA
* Broadcom MIPS32 74K core driver
*
* Copyright 2009, Broadcom Corporation
* Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
* Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com>
* Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include "bcma_private.h"
#include <linux/bcma/bcma.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/time.h>
/* The 47162a0 hangs when reading MIPS DMP registers registers */
static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
{
return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 &&
dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K;
}
/* The 5357b0 hangs when reading USB20H DMP registers */
static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev)
{
return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) &&
dev->bus->chipinfo.pkg == 11 &&
dev->id.id == BCMA_CORE_USB20_HOST;
}
static inline u32 mips_read32(struct bcma_drv_mips *mcore,
u16 offset)
{
return bcma_read32(mcore->core, offset);
}
static inline void mips_write32(struct bcma_drv_mips *mcore,
u16 offset,
u32 value)
{
bcma_write32(mcore->core, offset, value);
}
static const u32 ipsflag_irq_mask[] = {
0,
BCMA_MIPS_IPSFLAG_IRQ1,
BCMA_MIPS_IPSFLAG_IRQ2,
BCMA_MIPS_IPSFLAG_IRQ3,
BCMA_MIPS_IPSFLAG_IRQ4,
};
static const u32 ipsflag_irq_shift[] = {
0,
BCMA_MIPS_IPSFLAG_IRQ1_SHIFT,
BCMA_MIPS_IPSFLAG_IRQ2_SHIFT,
BCMA_MIPS_IPSFLAG_IRQ3_SHIFT,
BCMA_MIPS_IPSFLAG_IRQ4_SHIFT,
};
static u32 bcma_core_mips_irqflag(struct bcma_device *dev)
{
u32 flag;
if (bcma_core_mips_bcm47162a0_quirk(dev))
return dev->core_index;
if (bcma_core_mips_bcm5357b0_quirk(dev))
return dev->core_index;
flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
return flag & 0x1F;
}
/* Get the MIPS IRQ assignment for a specified device.
* If unassigned, 0 is returned.
*/
unsigned int bcma_core_mips_irq(struct bcma_device *dev)
{
struct bcma_device *mdev = dev->bus->drv_mips.core;
u32 irqflag;
unsigned int irq;
irqflag = bcma_core_mips_irqflag(dev);
for (irq = 1; irq <= 4; irq++)
if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
(1 << irqflag))
return irq;
return 0;
}
EXPORT_SYMBOL(bcma_core_mips_irq);
static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
{
unsigned int oldirq = bcma_core_mips_irq(dev);
struct bcma_bus *bus = dev->bus;
struct bcma_device *mdev = bus->drv_mips.core;
u32 irqflag;
irqflag = bcma_core_mips_irqflag(dev);
BUG_ON(oldirq == 6);
dev->irq = irq + 2;
/* clear the old irq */
if (oldirq == 0)
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
~(1 << irqflag));
else
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
/* assign the new one */
if (irq == 0) {
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
(1 << irqflag));
} else {
u32 oldirqflag = bcma_read32(mdev,
BCMA_MIPS_MIPS74K_INTMASK(irq));
if (oldirqflag) {
struct bcma_device *core;
/* backplane irq line is in use, find out who uses
* it and set user to irq 0
*/
list_for_each_entry(core, &bus->cores, list) {
if ((1 << bcma_core_mips_irqflag(core)) ==
oldirqflag) {
bcma_core_mips_set_irq(core, 0);
break;
}
}
}
bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq),
1 << irqflag);
}
bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n",
dev->id.id, oldirq + 2, irq + 2);
}
static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
{
int i;
static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
for (i = 0; i <= 6; i++)
printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
printk("\n");
}
static void bcma_core_mips_dump_irq(struct bcma_bus *bus)
{
struct bcma_device *core;
list_for_each_entry(core, &bus->cores, list) {
bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
}
}
u32 bcma_cpu_clock(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
return bcma_pmu_get_clockcpu(&bus->drv_cc);
bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
return 0;
}
EXPORT_SYMBOL(bcma_cpu_clock);
static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus = mcore->core->bus;
switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
case BCMA_CC_FLASHT_STSER:
case BCMA_CC_FLASHT_ATSER:
bcma_debug(bus, "Found serial flash\n");
bcma_sflash_init(&bus->drv_cc);
break;
case BCMA_CC_FLASHT_PARA:
bcma_debug(bus, "Found parallel flash\n");
bus->drv_cc.pflash.window = 0x1c000000;
bus->drv_cc.pflash.window_size = 0x02000000;
if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
BCMA_CC_FLASH_CFG_DS) == 0)
bus->drv_cc.pflash.buswidth = 1;
else
bus->drv_cc.pflash.buswidth = 2;
break;
default:
bcma_err(bus, "Flash type not supported\n");
}
if (bus->drv_cc.core->id.rev == 38 ||
bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
if (bus->drv_cc.capabilities & BCMA_CC_CAP_NFLASH) {
bcma_debug(bus, "Found NAND flash\n");
bcma_nflash_init(&bus->drv_cc);
}
}
}
void bcma_core_mips_init(struct bcma_drv_mips *mcore)
{
struct bcma_bus *bus;
struct bcma_device *core;
bus = mcore->core->bus;
bcma_info(bus, "Initializing MIPS core...\n");
if (!mcore->setup_done)
mcore->assigned_irqs = 1;
/* Assign IRQs to all cores on the bus */
list_for_each_entry(core, &bus->cores, list) {
int mips_irq;
if (core->irq)
continue;
mips_irq = bcma_core_mips_irq(core);
if (mips_irq > 4)
core->irq = 0;
else
core->irq = mips_irq + 2;
if (core->irq > 5)
continue;
switch (core->id.id) {
case BCMA_CORE_PCI:
case BCMA_CORE_PCIE:
case BCMA_CORE_ETHERNET:
case BCMA_CORE_ETHERNET_GBIT:
case BCMA_CORE_MAC_GBIT:
case BCMA_CORE_80211:
case BCMA_CORE_USB20_HOST:
/* These devices get their own IRQ line if available,
* the rest goes on IRQ0
*/
if (mcore->assigned_irqs <= 4)
bcma_core_mips_set_irq(core,
mcore->assigned_irqs++);
break;
}
}
bcma_info(bus, "IRQ reconfiguration done\n");
bcma_core_mips_dump_irq(bus);
if (mcore->setup_done)
return;
bcma_chipco_serial_init(&bus->drv_cc);
bcma_core_mips_flash_detect(mcore);
mcore->setup_done = true;
}
Reference in New Issue View Git Blame Copy Permalink