linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h

118 lines
3.3 KiB
C

/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
*
* Based on PM core support for S3C64XX by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/regs-gpio.h>
static inline void s3c_pm_debug_init_uart(void)
{
u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
/*
* As a note, since the S5P64X0 UARTs generally have multiple
* clock sources, we simply enable PCLK at the moment and hope
* that the resume settings for the UART are suitable for the
* use with PCLK.
*/
tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
__raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
udelay(10);
}
static inline void s3c_pm_arch_prepare_irqs(void)
{
/* VIC should have already been taken care of */
/* clear any pending EINT0 interrupts */
__raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
}
static inline void s3c_pm_arch_stop_clocks(void) { }
static inline void s3c_pm_arch_show_resume_irqs(void) { }
/*
* make these defines, we currently do not have any need to change
* the IRQ wake controls depending on the CPU we are running on
*/
#define s3c_irqwake_eintallow ((1 << 16) - 1)
#define s3c_irqwake_intallow (~0)
static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save)
{
u32 ucon = __raw_readl(regs + S3C2410_UCON);
u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
u32 new_ucon;
u32 delta;
/*
* S5P64X0 UART blocks only support level interrupts, so ensure that
* when we restore unused UART blocks we force the level interrupt
* settings.
*/
save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
/*
* We have a constraint on changing the clock type of the UART
* between UCLKx and PCLK, so ensure that when we restore UCON
* that the CLK field is correctly modified if the bootloader
* has changed anything.
*/
if (ucon_clk != save_clk) {
new_ucon = save->ucon;
delta = ucon_clk ^ save_clk;
/*
* change from UCLKx => wrong PCLK,
* either UCLK can be tested for by a bit-test
* with UCLK0
*/
if (ucon_clk & S3C6400_UCON_UCLK0 &&
!(save_clk & S3C6400_UCON_UCLK0) &&
delta & S3C6400_UCON_PCLK2) {
new_ucon &= ~S3C6400_UCON_UCLK0;
} else if (delta == S3C6400_UCON_PCLK2) {
/*
* as a precaution, don't change from
* PCLK2 => PCLK or vice-versa
*/
new_ucon ^= S3C6400_UCON_PCLK2;
}
S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
ucon, new_ucon, save->ucon);
save->ucon = new_ucon;
}
}
static inline void s3c_pm_restored_gpios(void)
{
/* ensure sleep mode has been cleared from the system */
__raw_writel(0, S5P64X0_SLPEN);
}
static inline void samsung_pm_saved_gpios(void)
{
/*
* turn on the sleep mode and keep it there, as it seems that during
* suspend the xCON registers get re-set and thus you can end up with
* problems between going to sleep and resuming.
*/
__raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
}