linux/drivers/clk/ti/clk-3xxx.c

362 lines
12 KiB
C

/*
* OMAP3 Clock init
*
* Copyright (C) 2013 Texas Instruments, Inc
* Tero Kristo (t-kristo@ti.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
#include "clock.h"
#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
#define OMAP34XX_CM_IDLEST_VAL 1
/*
* In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
* in the same register at a bit offset of 0x8. The EN_ACK for ICK is
* at an offset of 4 from ICK enable bit.
*/
#define AM35XX_IPSS_ICK_MASK 0xF
#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
#define AM35XX_IPSS_CLK_IDLEST_VAL 0
#define AM35XX_ST_IPSS_SHIFT 5
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
* from the CM_{I,F}CLKEN bit. Pass back the correct info via
* @idlest_reg and @idlest_bit. No return value.
*/
static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
struct clk_omap_reg *idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
idlest_reg->offset &= ~0xf0;
idlest_reg->offset |= 0x20;
*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_ssi_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
* omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* Some OMAP modules on OMAP3 ES2+ chips have both initiator and
* target IDLEST bits. For our purposes, we are concerned with the
* target IDLEST bits, which exist at a different bit position than
* the *CLKEN bit position for these modules (DSS and USBHOST) (The
* default find_idlest code assumes that they are at the same
* position.) No return value.
*/
static void
omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
struct clk_omap_reg *idlest_reg,
u8 *idlest_bit, u8 *idlest_val)
{
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
idlest_reg->offset &= ~0xf0;
idlest_reg->offset |= 0x20;
/* USBHOST_IDLE has same shift */
*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
.find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
* omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
* shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
* @idlest_reg and @idlest_bit. No return value.
*/
static void
omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
struct clk_omap_reg *idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
idlest_reg->offset &= ~0xf0;
idlest_reg->offset |= 0x20;
*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
* am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The interface clocks on AM35xx IPSS reflects the clock idle status
* in the enable register itsel at a bit offset of 4 from the enable
* bit. A value of 1 indicates that clock is enabled.
*/
static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
struct clk_omap_reg *idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
}
/**
* am35xx_clk_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
* @other_bit: u8 ** to return the companion clock bit shift in
*
* Some clocks don't have companion clocks. For example, modules with
* only an interface clock (such as HECC) don't have a companion
* clock. Right now, this code relies on the hardware exporting a bit
* in the correct companion register that indicates that the
* nonexistent 'companion clock' is active. Future patches will
* associate this type of code with per-module data structures to
* avoid this issue, and remove the casts. No return value.
*/
static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
struct clk_omap_reg *other_reg,
u8 *other_bit)
{
memcpy(other_reg, &clk->enable_reg, sizeof(*other_reg));
if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
else
*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
}
const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
.find_idlest = am35xx_clk_find_idlest,
.find_companion = am35xx_clk_find_companion,
};
/**
* am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
* @clk: struct clk * being enabled
* @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
* @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
* @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
*
* The IPSS target CM_IDLEST bit is at a different shift from the
* CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
* and @idlest_bit. No return value.
*/
static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
struct clk_omap_reg *idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
{
memcpy(idlest_reg, &clk->enable_reg, sizeof(*idlest_reg));
idlest_reg->offset &= ~0xf0;
idlest_reg->offset |= 0x20;
*idlest_bit = AM35XX_ST_IPSS_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = am35xx_clk_ipss_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "timer_32k_ck", "omap_32k_fck"),
DT_CLK(NULL, "timer_sys_ck", "sys_ck"),
{ .node_name = NULL },
};
static struct ti_dt_clk omap36xx_omap3430es2plus_clks[] = {
DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es2"),
DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es2"),
DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es2"),
DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es2"),
{ .node_name = NULL },
};
static struct ti_dt_clk omap3430es1_clks[] = {
DT_CLK(NULL, "ssi_ssr_fck", "ssi_ssr_fck_3430es1"),
DT_CLK(NULL, "ssi_sst_fck", "ssi_sst_fck_3430es1"),
DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_3430es1"),
DT_CLK(NULL, "ssi_ick", "ssi_ick_3430es1"),
DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es1"),
DT_CLK(NULL, "dss_ick", "dss_ick_3430es1"),
{ .node_name = NULL },
};
static struct ti_dt_clk omap36xx_am35xx_omap3430es2plus_clks[] = {
DT_CLK(NULL, "dss1_alwon_fck", "dss1_alwon_fck_3430es2"),
DT_CLK(NULL, "dss_ick", "dss_ick_3430es2"),
{ .node_name = NULL },
};
static struct ti_dt_clk am35xx_clks[] = {
DT_CLK(NULL, "hsotgusb_ick", "hsotgusb_ick_am35xx"),
DT_CLK(NULL, "hsotgusb_fck", "hsotgusb_fck_am35xx"),
DT_CLK(NULL, "uart4_ick", "uart4_ick_am35xx"),
DT_CLK(NULL, "uart4_fck", "uart4_fck_am35xx"),
{ .node_name = NULL },
};
static const char *enable_init_clks[] = {
"sdrc_ick",
"gpmc_fck",
"omapctrl_ick",
};
enum {
OMAP3_SOC_AM35XX,
OMAP3_SOC_OMAP3430_ES1,
OMAP3_SOC_OMAP3430_ES2_PLUS,
OMAP3_SOC_OMAP3630,
};
/**
* omap3_clk_lock_dpll5 - locks DPLL5
*
* Locks DPLL5 to a pre-defined frequency. This is required for proper
* operation of USB.
*/
void __init omap3_clk_lock_dpll5(void)
{
struct clk *dpll5_clk;
struct clk *dpll5_m2_clk;
/*
* Errata sprz319f advisory 2.1 documents a USB host clock drift issue
* that can be worked around using specially crafted dpll5 settings
* with a dpll5_m2 divider set to 8. Set the dpll5 rate to 8x the USB
* host clock rate, its .set_rate handler() will detect that frequency
* and use the errata settings.
*/
dpll5_clk = clk_get(NULL, "dpll5_ck");
clk_set_rate(dpll5_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST * 8);
clk_prepare_enable(dpll5_clk);
/* Program dpll5_m2_clk divider */
dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
clk_prepare_enable(dpll5_m2_clk);
clk_set_rate(dpll5_m2_clk, OMAP3_DPLL5_FREQ_FOR_USBHOST);
clk_disable_unprepare(dpll5_m2_clk);
clk_disable_unprepare(dpll5_clk);
}
static int __init omap3xxx_dt_clk_init(int soc_type)
{
if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
soc_type == OMAP3_SOC_OMAP3430_ES1 ||
soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
ti_dt_clocks_register(omap3xxx_clks);
if (soc_type == OMAP3_SOC_AM35XX)
ti_dt_clocks_register(am35xx_clks);
if (soc_type == OMAP3_SOC_OMAP3630 || soc_type == OMAP3_SOC_AM35XX ||
soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS)
ti_dt_clocks_register(omap36xx_am35xx_omap3430es2plus_clks);
if (soc_type == OMAP3_SOC_OMAP3430_ES1)
ti_dt_clocks_register(omap3430es1_clks);
if (soc_type == OMAP3_SOC_OMAP3430_ES2_PLUS ||
soc_type == OMAP3_SOC_OMAP3630)
ti_dt_clocks_register(omap36xx_omap3430es2plus_clks);
omap2_clk_disable_autoidle_all();
ti_clk_add_aliases();
omap2_clk_enable_init_clocks(enable_init_clks,
ARRAY_SIZE(enable_init_clks));
pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 1000000),
(clk_get_rate(clk_get_sys(NULL, "osc_sys_ck")) / 100000) % 10,
(clk_get_rate(clk_get_sys(NULL, "core_ck")) / 1000000),
(clk_get_rate(clk_get_sys(NULL, "arm_fck")) / 1000000));
if (soc_type != OMAP3_SOC_OMAP3430_ES1)
omap3_clk_lock_dpll5();
return 0;
}
int __init omap3430_dt_clk_init(void)
{
return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3430_ES2_PLUS);
}
int __init omap3630_dt_clk_init(void)
{
return omap3xxx_dt_clk_init(OMAP3_SOC_OMAP3630);
}
int __init am35xx_dt_clk_init(void)
{
return omap3xxx_dt_clk_init(OMAP3_SOC_AM35XX);
}