linux/drivers/net/wireless/wl12xx/spi.c
Kalle Valo 2f01a1f588 wl12xx: add driver
wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded
devices, supporting both SDIO and SPI busses. Currently the driver
supports only SPI. Adding support 1253 (the 5 GHz version) should be
relatively easy. More information here:

http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123

(Collapsed original sequence of pre-merge patches into single commit for
initial merge. -- JWL)

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06 15:14:54 -04:00

359 lines
9.7 KiB
C

/*
* This file is part of wl12xx
*
* Copyright (C) 2008 Nokia Corporation
*
* Contact: Kalle Valo <kalle.valo@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include "wl12xx.h"
#include "wl12xx_80211.h"
#include "reg.h"
#include "spi.h"
#include "ps.h"
static int wl12xx_translate_reg_addr(struct wl12xx *wl, int addr)
{
/* If the address is lower than REGISTERS_BASE, it means that this is
* a chip-specific register address, so look it up in the registers
* table */
if (addr < REGISTERS_BASE) {
/* Make sure we don't go over the table */
if (addr >= ACX_REG_TABLE_LEN) {
wl12xx_error("address out of range (%d)", addr);
return -EINVAL;
}
addr = wl->chip.acx_reg_table[addr];
}
return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
}
static int wl12xx_translate_mem_addr(struct wl12xx *wl, int addr)
{
return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
}
void wl12xx_spi_reset(struct wl12xx *wl)
{
u8 *cmd;
struct spi_transfer t;
struct spi_message m;
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
if (!cmd) {
wl12xx_error("could not allocate cmd for spi reset");
return;
}
memset(&t, 0, sizeof(t));
spi_message_init(&m);
memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
t.tx_buf = cmd;
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
spi_sync(wl->spi, &m);
wl12xx_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
}
void wl12xx_spi_init(struct wl12xx *wl)
{
u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
struct spi_transfer t;
struct spi_message m;
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
if (!cmd) {
wl12xx_error("could not allocate cmd for spi init");
return;
}
memset(crc, 0, sizeof(crc));
memset(&t, 0, sizeof(t));
spi_message_init(&m);
/*
* Set WSPI_INIT_COMMAND
* the data is being send from the MSB to LSB
*/
cmd[2] = 0xff;
cmd[3] = 0xff;
cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
cmd[0] = 0;
cmd[7] = 0;
cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
else
cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
crc[0] = cmd[1];
crc[1] = cmd[0];
crc[2] = cmd[7];
crc[3] = cmd[6];
crc[4] = cmd[5];
cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
cmd[4] |= WSPI_INIT_CMD_END;
t.tx_buf = cmd;
t.len = WSPI_INIT_CMD_LEN;
spi_message_add_tail(&t, &m);
spi_sync(wl->spi, &m);
wl12xx_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
}
/* Set the SPI partitions to access the chip addresses
*
* There are two VIRTUAL (SPI) partitions (the memory partition and the
* registers partition), which are mapped to two different areas of the
* PHYSICAL (hardware) memory. This function also makes other checks to
* ensure that the partitions are not overlapping. In the diagram below, the
* memory partition comes before the register partition, but the opposite is
* also supported.
*
* PHYSICAL address
* space
*
* | |
* ...+----+--> mem_start
* VIRTUAL address ... | |
* space ... | | [PART_0]
* ... | |
* 0x00000000 <--+----+... ...+----+--> mem_start + mem_size
* | | ... | |
* |MEM | ... | |
* | | ... | |
* part_size <--+----+... | | {unused area)
* | | ... | |
* |REG | ... | |
* part_size | | ... | |
* + <--+----+... ...+----+--> reg_start
* reg_size ... | |
* ... | | [PART_1]
* ... | |
* ...+----+--> reg_start + reg_size
* | |
*
*/
void wl12xx_set_partition(struct wl12xx *wl,
u32 mem_start, u32 mem_size,
u32 reg_start, u32 reg_size)
{
u8 tx_buf[sizeof(u32) + 2 * sizeof(struct wl12xx_partition)];
struct wl12xx_partition *partition;
struct spi_transfer t;
struct spi_message m;
u32 *cmd;
size_t len;
int addr;
spi_message_init(&m);
memset(&t, 0, sizeof(t));
memset(tx_buf, 0, sizeof(tx_buf));
cmd = (u32 *) tx_buf;
partition = (struct wl12xx_partition *) (tx_buf + sizeof(u32));
addr = HW_ACCESS_PART0_SIZE_ADDR;
len = 2 * sizeof(struct wl12xx_partition);
*cmd |= WSPI_CMD_WRITE;
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
mem_start, mem_size);
wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
reg_start, reg_size);
/* Make sure that the two partitions together don't exceed the
* address range */
if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
wl12xx_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
" address range. Truncating partition[0].");
mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
mem_start, mem_size);
wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
reg_start, reg_size);
}
if ((mem_start < reg_start) &&
((mem_start + mem_size) > reg_start)) {
/* Guarantee that the memory partition doesn't overlap the
* registers partition */
wl12xx_debug(DEBUG_SPI, "End of partition[0] is "
"overlapping partition[1]. Adjusted.");
mem_size = reg_start - mem_start;
wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
mem_start, mem_size);
wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
reg_start, reg_size);
} else if ((reg_start < mem_start) &&
((reg_start + reg_size) > mem_start)) {
/* Guarantee that the register partition doesn't overlap the
* memory partition */
wl12xx_debug(DEBUG_SPI, "End of partition[1] is"
" overlapping partition[0]. Adjusted.");
reg_size = mem_start - reg_start;
wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
mem_start, mem_size);
wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
reg_start, reg_size);
}
partition[0].start = mem_start;
partition[0].size = mem_size;
partition[1].start = reg_start;
partition[1].size = reg_size;
wl->physical_mem_addr = mem_start;
wl->physical_reg_addr = reg_start;
wl->virtual_mem_addr = 0;
wl->virtual_reg_addr = mem_size;
t.tx_buf = tx_buf;
t.len = sizeof(tx_buf);
spi_message_add_tail(&t, &m);
spi_sync(wl->spi, &m);
}
void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf,
size_t len)
{
struct spi_transfer t[3];
struct spi_message m;
char busy_buf[TNETWIF_READ_OFFSET_BYTES];
u32 cmd;
cmd = 0;
cmd |= WSPI_CMD_READ;
cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
cmd |= addr & WSPI_CMD_BYTE_ADDR;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = &cmd;
t[0].len = 4;
spi_message_add_tail(&t[0], &m);
/* Busy and non busy words read */
t[1].rx_buf = busy_buf;
t[1].len = TNETWIF_READ_OFFSET_BYTES;
spi_message_add_tail(&t[1], &m);
t[2].rx_buf = buf;
t[2].len = len;
spi_message_add_tail(&t[2], &m);
spi_sync(wl->spi, &m);
/* FIXME: check busy words */
wl12xx_dump(DEBUG_SPI, "spi_read cmd -> ", &cmd, sizeof(cmd));
wl12xx_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
}
void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf,
size_t len)
{
struct spi_transfer t[2];
struct spi_message m;
u32 cmd;
cmd = 0;
cmd |= WSPI_CMD_WRITE;
cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
cmd |= addr & WSPI_CMD_BYTE_ADDR;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = &cmd;
t[0].len = sizeof(cmd);
spi_message_add_tail(&t[0], &m);
t[1].tx_buf = buf;
t[1].len = len;
spi_message_add_tail(&t[1], &m);
spi_sync(wl->spi, &m);
wl12xx_dump(DEBUG_SPI, "spi_write cmd -> ", &cmd, sizeof(cmd));
wl12xx_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
}
void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf,
size_t len)
{
int physical;
physical = wl12xx_translate_mem_addr(wl, addr);
wl12xx_spi_read(wl, physical, buf, len);
}
void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf,
size_t len)
{
int physical;
physical = wl12xx_translate_mem_addr(wl, addr);
wl12xx_spi_write(wl, physical, buf, len);
}
u32 wl12xx_mem_read32(struct wl12xx *wl, int addr)
{
return wl12xx_read32(wl, wl12xx_translate_mem_addr(wl, addr));
}
void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val)
{
wl12xx_write32(wl, wl12xx_translate_mem_addr(wl, addr), val);
}
u32 wl12xx_reg_read32(struct wl12xx *wl, int addr)
{
return wl12xx_read32(wl, wl12xx_translate_reg_addr(wl, addr));
}
void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val)
{
wl12xx_write32(wl, wl12xx_translate_reg_addr(wl, addr), val);
}