linux/arch/arm/plat-samsung/include/plat/cpu-freq-core.h

294 lines
8.9 KiB
C

/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h
*
* Copyright (c) 2006-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C CPU frequency scaling support - core support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <plat/cpu-freq.h>
struct seq_file;
#define MAX_BANKS (8)
#define S3C2412_MAX_IO (8)
/**
* struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
* @bankcon: The cached version of settings in this structure.
* @tacp:
* @tacs: Time from address valid to nCS asserted.
* @tcos: Time from nCS asserted to nOE or nWE asserted.
* @tacc: Time that nOE or nWE is asserted.
* @tcoh: Time nCS is held after nOE or nWE are released.
* @tcah: Time address is held for after
* @nwait_en: Whether nWAIT is enabled for this bank.
*
* This structure represents the IO timings for a S3C2410 style IO bank
* used by the CPU frequency support if it needs to change the settings
* of the IO.
*/
struct s3c2410_iobank_timing {
unsigned long bankcon;
unsigned int tacp;
unsigned int tacs;
unsigned int tcos;
unsigned int tacc;
unsigned int tcoh; /* nCS hold afrer nOE/nWE */
unsigned int tcah; /* Address hold after nCS */
unsigned char nwait_en; /* nWait enabled for bank. */
};
/**
* struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
* @idcy: The idle cycle time between transactions.
* @wstrd: nCS release to end of read cycle.
* @wstwr: nCS release to end of write cycle.
* @wstoen: nCS assertion to nOE assertion time.
* @wstwen: nCS assertion to nWE assertion time.
* @wstbrd: Burst ready delay.
* @smbidcyr: Register cache for smbidcyr value.
* @smbwstrd: Register cache for smbwstrd value.
* @smbwstwr: Register cache for smbwstwr value.
* @smbwstoen: Register cache for smbwstoen value.
* @smbwstwen: Register cache for smbwstwen value.
* @smbwstbrd: Register cache for smbwstbrd value.
*
* Timing information for a IO bank on an S3C2412 or similar system which
* uses a PL093 block.
*/
struct s3c2412_iobank_timing {
unsigned int idcy;
unsigned int wstrd;
unsigned int wstwr;
unsigned int wstoen;
unsigned int wstwen;
unsigned int wstbrd;
/* register cache */
unsigned char smbidcyr;
unsigned char smbwstrd;
unsigned char smbwstwr;
unsigned char smbwstoen;
unsigned char smbwstwen;
unsigned char smbwstbrd;
};
union s3c_iobank {
struct s3c2410_iobank_timing *io_2410;
struct s3c2412_iobank_timing *io_2412;
};
/**
* struct s3c_iotimings - Chip IO timings holder
* @bank: The timings for each IO bank.
*/
struct s3c_iotimings {
union s3c_iobank bank[MAX_BANKS];
};
/**
* struct s3c_plltab - PLL table information.
* @vals: List of PLL values.
* @size: Size of the PLL table @vals.
*/
struct s3c_plltab {
struct s3c_pllval *vals;
int size;
};
/**
* struct s3c_cpufreq_config - current cpu frequency configuration
* @freq: The current settings for the core clocks.
* @max: Maxium settings, derived from core, board and user settings.
* @pll: The PLL table entry for the current PLL settings.
* @divs: The divisor settings for the core clocks.
* @info: The current core driver information.
* @board: The information for the board we are running on.
* @lock_pll: Set if the PLL settings cannot be changed.
*
* This is for the core drivers that need to know information about
* the current settings and values. It should not be needed by any
* device drivers.
*/
struct s3c_cpufreq_config {
struct s3c_freq freq;
struct s3c_freq max;
struct cpufreq_frequency_table pll;
struct s3c_clkdivs divs;
struct s3c_cpufreq_info *info; /* for core, not drivers */
struct s3c_cpufreq_board *board;
unsigned int lock_pll:1;
};
/**
* struct s3c_cpufreq_info - Information for the CPU frequency driver.
* @name: The name of this implementation.
* @max: The maximum frequencies for the system.
* @latency: Transition latency to give to cpufreq.
* @locktime_m: The lock-time in uS for the MPLL.
* @locktime_u: The lock-time in uS for the UPLL.
* @locttime_bits: The number of bits each LOCKTIME field.
* @need_pll: Set if this driver needs to change the PLL values to achieve
* any frequency changes. This is really only need by devices like the
* S3C2410 where there is no or limited divider between the PLL and the
* ARMCLK.
* @resume_clocks: Update the clocks on resume.
* @get_iotiming: Get the current IO timing data, mainly for use at start.
* @set_iotiming: Update the IO timings from the cached copies calculated
* from the @calc_iotiming entry when changing the frequency.
* @calc_iotiming: Calculate and update the cached copies of the IO timings
* from the newly calculated frequencies.
* @calc_freqtable: Calculate (fill in) the given frequency table from the
* current frequency configuration. If the table passed in is NULL,
* then the return is the number of elements to be filled for allocation
* of the table.
* @set_refresh: Set the memory refresh configuration.
* @set_fvco: Set the PLL frequencies.
* @set_divs: Update the clock divisors.
* @calc_divs: Calculate the clock divisors.
*/
struct s3c_cpufreq_info {
const char *name;
struct s3c_freq max;
unsigned int latency;
unsigned int locktime_m;
unsigned int locktime_u;
unsigned char locktime_bits;
unsigned int need_pll:1;
/* driver routines */
void (*resume_clocks)(void);
int (*get_iotiming)(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *timings);
void (*set_iotiming)(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *timings);
int (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *timings);
int (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
struct cpufreq_frequency_table *t,
size_t table_size);
void (*debug_io_show)(struct seq_file *seq,
struct s3c_cpufreq_config *cfg,
union s3c_iobank *iob);
void (*set_refresh)(struct s3c_cpufreq_config *cfg);
void (*set_fvco)(struct s3c_cpufreq_config *cfg);
void (*set_divs)(struct s3c_cpufreq_config *cfg);
int (*calc_divs)(struct s3c_cpufreq_config *cfg);
};
extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
unsigned int plls_no);
/* exports and utilities for debugfs */
extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
#define s3c_cpufreq_debugfs_call(x) x
#else
#define s3c_cpufreq_debugfs_call(x) NULL
#endif
/* Useful utility functions. */
extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
/* S3C2410 and compatible exported functions */
extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
#ifdef CONFIG_S3C2410_IOTIMING
extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
struct s3c_cpufreq_config *cfg,
union s3c_iobank *iob);
extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *timings);
extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
#else
#define s3c2410_iotiming_debugfs NULL
#define s3c2410_iotiming_calc NULL
#define s3c2410_iotiming_get NULL
#define s3c2410_iotiming_set NULL
#endif /* CONFIG_S3C2410_IOTIMING */
/* S3C2412 compatible routines */
#ifdef CONFIG_S3C2412_IOTIMING
extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
struct s3c_cpufreq_config *cfg,
union s3c_iobank *iob);
extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *timings);
extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
#else
#define s3c2412_iotiming_debugfs NULL
#define s3c2412_iotiming_calc NULL
#define s3c2412_iotiming_get NULL
#define s3c2412_iotiming_set NULL
#endif /* CONFIG_S3C2412_IOTIMING */
#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
#define s3c_freq_dbg(x...) printk(KERN_INFO x)
#else
#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
#else
#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
int index, size_t table_size,
unsigned int freq)
{
if (index < 0)
return index;
if (table) {
if (index >= table_size)
return -ENOMEM;
s3c_freq_dbg("%s: { %d = %u kHz }\n",
__func__, index, freq);
table[index].index = index;
table[index].frequency = freq;
}
return index + 1;
}