OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/mach-omap2/smartreflex.c

1031 lines
28 KiB
C
Raw Blame History

/*
* OMAP SmartReflex Voltage Control
*
* Author: Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2010 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008 Nokia Corporation
* Kalle Jokiniemi
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Lesly A M <x0080970@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <plat/common.h>
#include "pm.h"
#include "smartreflex.h"
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
#define SR_DISABLE_TIMEOUT 200
struct omap_sr {
int srid;
int ip_type;
int nvalue_count;
bool autocomp_active;
u32 clk_length;
u32 err_weight;
u32 err_minlimit;
u32 err_maxlimit;
u32 accum_data;
u32 senn_avgweight;
u32 senp_avgweight;
u32 senp_mod;
u32 senn_mod;
unsigned int irq;
void __iomem *base;
struct platform_device *pdev;
struct list_head node;
struct omap_sr_nvalue_table *nvalue_table;
struct voltagedomain *voltdm;
struct dentry *dbg_dir;
};
/* sr_list contains all the instances of smartreflex module */
static LIST_HEAD(sr_list);
static struct omap_sr_class_data *sr_class;
static struct omap_sr_pmic_data *sr_pmic_data;
static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
{
__raw_writel(value, (sr->base + offset));
}
static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
u32 value)
{
u32 reg_val;
u32 errconfig_offs = 0, errconfig_mask = 0;
reg_val = __raw_readl(sr->base + offset);
reg_val &= ~mask;
/*
* Smartreflex error config register is special as it contains
* certain status bits which if written a 1 into means a clear
* of those bits. So in order to make sure no accidental write of
* 1 happens to those status bits, do a clear of them in the read
* value. This mean this API doesn't rewrite values in these bits
* if they are currently set, but does allow the caller to write
* those bits.
*/
if (sr->ip_type == SR_TYPE_V1) {
errconfig_offs = ERRCONFIG_V1;
errconfig_mask = ERRCONFIG_STATUS_V1_MASK;
} else if (sr->ip_type == SR_TYPE_V2) {
errconfig_offs = ERRCONFIG_V2;
errconfig_mask = ERRCONFIG_VPBOUNDINTST_V2;
}
if (offset == errconfig_offs)
reg_val &= ~errconfig_mask;
reg_val |= value;
__raw_writel(reg_val, (sr->base + offset));
}
static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
{
return __raw_readl(sr->base + offset);
}
static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
{
struct omap_sr *sr_info;
if (!voltdm) {
pr_err("%s: Null voltage domain passed!\n", __func__);
return ERR_PTR(-EINVAL);
}
list_for_each_entry(sr_info, &sr_list, node) {
if (voltdm == sr_info->voltdm)
return sr_info;
}
return ERR_PTR(-ENODATA);
}
static irqreturn_t sr_interrupt(int irq, void *data)
{
struct omap_sr *sr_info = (struct omap_sr *)data;
u32 status = 0;
if (sr_info->ip_type == SR_TYPE_V1) {
/* Read the status bits */
status = sr_read_reg(sr_info, ERRCONFIG_V1);
/* Clear them by writing back */
sr_write_reg(sr_info, ERRCONFIG_V1, status);
} else if (sr_info->ip_type == SR_TYPE_V2) {
/* Read the status bits */
sr_read_reg(sr_info, IRQSTATUS);
/* Clear them by writing back */
sr_write_reg(sr_info, IRQSTATUS, status);
}
if (sr_class->class_type == SR_CLASS2 && sr_class->notify)
sr_class->notify(sr_info->voltdm, status);
return IRQ_HANDLED;
}
static void sr_set_clk_length(struct omap_sr *sr)
{
struct clk *sys_ck;
u32 sys_clk_speed;
if (cpu_is_omap34xx())
sys_ck = clk_get(NULL, "sys_ck");
else
sys_ck = clk_get(NULL, "sys_clkin_ck");
if (IS_ERR(sys_ck)) {
dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
__func__);
return;
}
sys_clk_speed = clk_get_rate(sys_ck);
clk_put(sys_ck);
switch (sys_clk_speed) {
case 12000000:
sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
break;
case 13000000:
sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
break;
case 19200000:
sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
break;
case 26000000:
sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
break;
case 38400000:
sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
break;
default:
dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
__func__, sys_clk_speed);
break;
}
}
static void sr_set_regfields(struct omap_sr *sr)
{
/*
* For time being these values are defined in smartreflex.h
* and populated during init. May be they can be moved to board
* file or pmic specific data structure. In that case these structure
* fields will have to be populated using the pdata or pmic structure.
*/
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sr->err_weight = OMAP3430_SR_ERRWEIGHT;
sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
sr->accum_data = OMAP3430_SR_ACCUMDATA;
if (!(strcmp(sr->voltdm->name, "mpu"))) {
sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
} else {
sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
}
}
}
static void sr_start_vddautocomp(struct omap_sr *sr)
{
if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
dev_warn(&sr->pdev->dev,
"%s: smartreflex class driver not registered\n",
__func__);
return;
}
if (!sr_class->enable(sr->voltdm))
sr->autocomp_active = true;
}
static void sr_stop_vddautocomp(struct omap_sr *sr)
{
if (!sr_class || !(sr_class->disable)) {
dev_warn(&sr->pdev->dev,
"%s: smartreflex class driver not registered\n",
__func__);
return;
}
if (sr->autocomp_active) {
sr_class->disable(sr->voltdm, 1);
sr->autocomp_active = false;
}
}
/*
* This function handles the intializations which have to be done
* only when both sr device and class driver regiter has
* completed. This will be attempted to be called from both sr class
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
* Currently this function registers interrrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
static int sr_late_init(struct omap_sr *sr_info)
{
char *name;
struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
struct resource *mem;
int ret = 0;
if (sr_class->class_type == SR_CLASS2 &&
sr_class->notify_flags && sr_info->irq) {
name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
if (name == NULL) {
ret = -ENOMEM;
goto error;
}
ret = request_irq(sr_info->irq, sr_interrupt,
0, name, (void *)sr_info);
if (ret)
goto error;
}
if (pdata && pdata->enable_on_init)
sr_start_vddautocomp(sr_info);
return ret;
error:
iounmap(sr_info->base);
mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, resource_size(mem));
list_del(&sr_info->node);
dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
"interrupt handler. Smartreflex will"
"not function as desired\n", __func__);
kfree(name);
kfree(sr_info);
return ret;
}
static void sr_v1_disable(struct omap_sr *sr)
{
int timeout = 0;
/* Enable MCUDisableAcknowledge interrupt */
sr_modify_reg(sr, ERRCONFIG_V1,
ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
/* SRCONFIG - disable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
/* Disable all other SR interrupts and clear the status */
sr_modify_reg(sr, ERRCONFIG_V1,
(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
(ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
ERRCONFIG_MCUBOUNDINTST |
ERRCONFIG_VPBOUNDINTST_V1));
/*
* Wait for SR to be disabled.
* wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
*/
omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
timeout);
if (timeout >= SR_DISABLE_TIMEOUT)
dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
__func__);
/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
ERRCONFIG_MCUDISACKINTST);
}
static void sr_v2_disable(struct omap_sr *sr)
{
int timeout = 0;
/* Enable MCUDisableAcknowledge interrupt */
sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
/* SRCONFIG - disable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
/* Disable all other SR interrupts and clear the status */
sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
ERRCONFIG_VPBOUNDINTST_V2);
sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
IRQENABLE_MCUVALIDINT |
IRQENABLE_MCUBOUNDSINT));
sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
IRQSTATUS_MCVALIDINT |
IRQSTATUS_MCBOUNDSINT));
/*
* Wait for SR to be disabled.
* wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
*/
omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
timeout);
if (timeout >= SR_DISABLE_TIMEOUT)
dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
__func__);
/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
}
static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
{
int i;
if (!sr->nvalue_table) {
dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
__func__);
return 0;
}
for (i = 0; i < sr->nvalue_count; i++) {
if (sr->nvalue_table[i].efuse_offs == efuse_offs)
return sr->nvalue_table[i].nvalue;
}
return 0;
}
/* Public Functions */
/**
* sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
* error generator module.
* @voltdm: VDD pointer to which the SR module to be configured belongs to.
*
* This API is to be called from the smartreflex class driver to
* configure the error generator module inside the smartreflex module.
* SR settings if using the ERROR module inside Smartreflex.
* SR CLASS 3 by default uses only the ERROR module where as
* SR CLASS 2 can choose between ERROR module and MINMAXAVG
* module. Returns 0 on success and error value in case of failure.
*/
int sr_configure_errgen(struct voltagedomain *voltdm)
{
u32 sr_config, sr_errconfig, errconfig_offs, vpboundint_en;
u32 vpboundint_st, senp_en = 0, senn_en = 0;
u8 senp_shift, senn_shift;
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
return -EINVAL;
}
if (!sr->clk_length)
sr_set_clk_length(sr);
senp_en = sr->senp_mod;
senn_en = sr->senn_mod;
sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
if (sr->ip_type == SR_TYPE_V1) {
sr_config |= SRCONFIG_DELAYCTRL;
senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
errconfig_offs = ERRCONFIG_V1;
vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
} else if (sr->ip_type == SR_TYPE_V2) {
senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
errconfig_offs = ERRCONFIG_V2;
vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
} else {
dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
"module without specifying the ip\n", __func__);
return -EINVAL;
}
sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
sr_write_reg(sr, SRCONFIG, sr_config);
sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
(sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
(sr->err_minlimit << ERRCONFIG_ERRMINLIMIT_SHIFT);
sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
sr_errconfig);
/* Enabling the interrupts if the ERROR module is used */
sr_modify_reg(sr, errconfig_offs,
vpboundint_en, (vpboundint_en | vpboundint_st));
return 0;
}
/**
* sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
* minmaxavg module.
* @voltdm: VDD pointer to which the SR module to be configured belongs to.
*
* This API is to be called from the smartreflex class driver to
* configure the minmaxavg module inside the smartreflex module.
* SR settings if using the ERROR module inside Smartreflex.
* SR CLASS 3 by default uses only the ERROR module where as
* SR CLASS 2 can choose between ERROR module and MINMAXAVG
* module. Returns 0 on success and error value in case of failure.
*/
int sr_configure_minmax(struct voltagedomain *voltdm)
{
u32 sr_config, sr_avgwt;
u32 senp_en = 0, senn_en = 0;
u8 senp_shift, senn_shift;
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
return -EINVAL;
}
if (!sr->clk_length)
sr_set_clk_length(sr);
senp_en = sr->senp_mod;
senn_en = sr->senn_mod;
sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
SRCONFIG_SENENABLE |
(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
if (sr->ip_type == SR_TYPE_V1) {
sr_config |= SRCONFIG_DELAYCTRL;
senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
} else if (sr->ip_type == SR_TYPE_V2) {
senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
} else {
dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
"module without specifying the ip\n", __func__);
return -EINVAL;
}
sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
sr_write_reg(sr, SRCONFIG, sr_config);
sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
(sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
/*
* Enabling the interrupts if MINMAXAVG module is used.
* TODO: check if all the interrupts are mandatory
*/
if (sr->ip_type == SR_TYPE_V1) {
sr_modify_reg(sr, ERRCONFIG_V1,
(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
ERRCONFIG_MCUBOUNDINTEN),
(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
} else if (sr->ip_type == SR_TYPE_V2) {
sr_write_reg(sr, IRQSTATUS,
IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
sr_write_reg(sr, IRQENABLE_SET,
IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
}
return 0;
}
/**
* sr_enable() - Enables the smartreflex module.
* @voltdm: VDD pointer to which the SR module to be configured belongs to.
* @volt: The voltage at which the Voltage domain associated with
* the smartreflex module is operating at.
* This is required only to program the correct Ntarget value.
*
* This API is to be called from the smartreflex class driver to
* enable a smartreflex module. Returns 0 on success. Returns error
* value if the voltage passed is wrong or if ntarget value is wrong.
*/
int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
{
u32 nvalue_reciprocal;
struct omap_volt_data *volt_data;
struct omap_sr *sr = _sr_lookup(voltdm);
int ret;
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
return -EINVAL;
}
volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
if (IS_ERR(volt_data)) {
dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
"for nominal voltage %ld\n", __func__, volt);
return -ENODATA;
}
nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
if (!nvalue_reciprocal) {
dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
__func__, volt);
return -ENODATA;
}
/* errminlimit is opp dependent and hence linked to voltage */
sr->err_minlimit = volt_data->sr_errminlimit;
pm_runtime_get_sync(&sr->pdev->dev);
/* Check if SR is already enabled. If yes do nothing */
if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
return 0;
/* Configure SR */
ret = sr_class->configure(voltdm);
if (ret)
return ret;
sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
/* SRCONFIG - enable SR */
sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
return 0;
}
/**
* sr_disable() - Disables the smartreflex module.
* @voltdm: VDD pointer to which the SR module to be configured belongs to.
*
* This API is to be called from the smartreflex class driver to
* disable a smartreflex module.
*/
void sr_disable(struct voltagedomain *voltdm)
{
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
return;
}
/* Check if SR clocks are already disabled. If yes do nothing */
if (pm_runtime_suspended(&sr->pdev->dev))
return;
/*
* Disable SR if only it is indeed enabled. Else just
* disable the clocks.
*/
if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
if (sr->ip_type == SR_TYPE_V1)
sr_v1_disable(sr);
else if (sr->ip_type == SR_TYPE_V2)
sr_v2_disable(sr);
}
pm_runtime_put_sync(&sr->pdev->dev);
}
/**
* sr_register_class() - API to register a smartreflex class parameters.
* @class_data: The structure containing various sr class specific data.
*
* This API is to be called by the smartreflex class driver to register itself
* with the smartreflex driver during init. Returns 0 on success else the
* error value.
*/
int sr_register_class(struct omap_sr_class_data *class_data)
{
struct omap_sr *sr_info;
if (!class_data) {
pr_warning("%s:, Smartreflex class data passed is NULL\n",
__func__);
return -EINVAL;
}
if (sr_class) {
pr_warning("%s: Smartreflex class driver already registered\n",
__func__);
return -EBUSY;
}
sr_class = class_data;
/*
* Call into late init to do intializations that require
* both sr driver and sr class driver to be initiallized.
*/
list_for_each_entry(sr_info, &sr_list, node)
sr_late_init(sr_info);
return 0;
}
/**
* omap_sr_enable() - API to enable SR clocks and to call into the
* registered smartreflex class enable API.
* @voltdm: VDD pointer to which the SR module to be configured belongs to.
*
* This API is to be called from the kernel in order to enable
* a particular smartreflex module. This API will do the initial
* configurations to turn on the smartreflex module and in turn call
* into the registered smartreflex class enable API.
*/
void omap_sr_enable(struct voltagedomain *voltdm)
{
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
return;
}
if (!sr->autocomp_active)
return;
if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
"registered\n", __func__);
return;
}
sr_class->enable(voltdm);
}
/**
* omap_sr_disable() - API to disable SR without resetting the voltage
* processor voltage
* @voltdm: VDD pointer to which the SR module to be configured belongs to.
*
* This API is to be called from the kernel in order to disable
* a particular smartreflex module. This API will in turn call
* into the registered smartreflex class disable API. This API will tell
* the smartreflex class disable not to reset the VP voltage after
* disabling smartreflex.
*/
void omap_sr_disable(struct voltagedomain *voltdm)
{
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
return;
}
if (!sr->autocomp_active)
return;
if (!sr_class || !(sr_class->disable)) {
dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
"registered\n", __func__);
return;
}
sr_class->disable(voltdm, 0);
}
/**
* omap_sr_disable_reset_volt() - API to disable SR and reset the
* voltage processor voltage
* @voltdm: VDD pointer to which the SR module to be configured belongs to.
*
* This API is to be called from the kernel in order to disable
* a particular smartreflex module. This API will in turn call
* into the registered smartreflex class disable API. This API will tell
* the smartreflex class disable to reset the VP voltage after
* disabling smartreflex.
*/
void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
{
struct omap_sr *sr = _sr_lookup(voltdm);
if (IS_ERR(sr)) {
pr_warning("%s: omap_sr struct for sr_%s not found\n",
__func__, voltdm->name);
return;
}
if (!sr->autocomp_active)
return;
if (!sr_class || !(sr_class->disable)) {
dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
"registered\n", __func__);
return;
}
sr_class->disable(voltdm, 1);
}
/**
* omap_sr_register_pmic() - API to register pmic specific info.
* @pmic_data: The structure containing pmic specific data.
*
* This API is to be called from the PMIC specific code to register with
* smartreflex driver pmic specific info. Currently the only info required
* is the smartreflex init on the PMIC side.
*/
void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
{
if (!pmic_data) {
pr_warning("%s: Trying to register NULL PMIC data structure"
"with smartreflex\n", __func__);
return;
}
sr_pmic_data = pmic_data;
}
/* PM Debug Fs enteries to enable disable smartreflex. */
static int omap_sr_autocomp_show(void *data, u64 *val)
{
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
*val = sr_info->autocomp_active;
return 0;
}
static int omap_sr_autocomp_store(void *data, u64 val)
{
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
/* Sanity check */
if (val && (val != 1)) {
pr_warning("%s: Invalid argument %lld\n", __func__, val);
return -EINVAL;
}
if (!val)
sr_stop_vddautocomp(sr_info);
else
sr_start_vddautocomp(sr_info);
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
omap_sr_autocomp_store, "%llu\n");
static int __init omap_sr_probe(struct platform_device *pdev)
{
struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct resource *mem, *irq;
struct dentry *vdd_dbg_dir, *nvalue_dir;
struct omap_volt_data *volt_data;
int i, ret = 0;
if (!sr_info) {
dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
__func__);
return -ENOMEM;
}
if (!pdata) {
dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
ret = -EINVAL;
goto err_free_devinfo;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
ret = -ENODEV;
goto err_free_devinfo;
}
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
pm_runtime_enable(&pdev->dev);
sr_info->pdev = pdev;
sr_info->srid = pdev->id;
sr_info->voltdm = pdata->voltdm;
sr_info->nvalue_table = pdata->nvalue_table;
sr_info->nvalue_count = pdata->nvalue_count;
sr_info->senn_mod = pdata->senn_mod;
sr_info->senp_mod = pdata->senp_mod;
sr_info->autocomp_active = false;
sr_info->ip_type = pdata->ip_type;
sr_info->base = ioremap(mem->start, resource_size(mem));
if (!sr_info->base) {
dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
ret = -ENOMEM;
goto err_release_region;
}
if (irq)
sr_info->irq = irq->start;
sr_set_clk_length(sr_info);
sr_set_regfields(sr_info);
list_add(&sr_info->node, &sr_list);
/*
* Call into late init to do intializations that require
* both sr driver and sr class driver to be initiallized.
*/
if (sr_class) {
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
goto err_release_region;
}
}
dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
/*
* If the voltage domain debugfs directory is not created, do
* not try to create rest of the debugfs entries.
*/
vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
if (!vdd_dbg_dir) {
ret = -EINVAL;
goto err_release_region;
}
sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
if (IS_ERR(sr_info->dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
ret = PTR_ERR(sr_info->dbg_dir);
goto err_release_region;
}
(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
(void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
&sr_info->err_weight);
(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
&sr_info->err_maxlimit);
(void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir,
&sr_info->err_minlimit);
nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
if (IS_ERR(nvalue_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
"for n-values\n", __func__);
ret = PTR_ERR(nvalue_dir);
goto err_release_region;
}
omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
if (!volt_data) {
dev_warn(&pdev->dev, "%s: No Voltage table for the"
" corresponding vdd vdd_%s. Cannot create debugfs"
"entries for n-values\n",
__func__, sr_info->voltdm->name);
ret = -ENODATA;
goto err_release_region;
}
for (i = 0; i < sr_info->nvalue_count; i++) {
char name[NVALUE_NAME_LEN + 1];
snprintf(name, sizeof(name), "volt_%d",
volt_data[i].volt_nominal);
(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
}
return ret;
err_release_region:
release_mem_region(mem->start, resource_size(mem));
err_free_devinfo:
kfree(sr_info);
return ret;
}
static int __devexit omap_sr_remove(struct platform_device *pdev)
{
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct omap_sr *sr_info;
struct resource *mem;
if (!pdata) {
dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
return -EINVAL;
}
sr_info = _sr_lookup(pdata->voltdm);
if (IS_ERR(sr_info)) {
dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
__func__);
return -EINVAL;
}
if (sr_info->autocomp_active)
sr_stop_vddautocomp(sr_info);
if (sr_info->dbg_dir)
debugfs_remove_recursive(sr_info->dbg_dir);
list_del(&sr_info->node);
iounmap(sr_info->base);
kfree(sr_info);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, resource_size(mem));
return 0;
}
static struct platform_driver smartreflex_driver = {
.remove = omap_sr_remove,
.driver = {
.name = "smartreflex",
},
};
static int __init sr_init(void)
{
int ret = 0;
/*
* sr_init is a late init. If by then a pmic specific API is not
* registered either there is no need for anything to be done on
* the PMIC side or somebody has forgotten to register a PMIC
* handler. Warn for the second condition.
*/
if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
sr_pmic_data->sr_pmic_init();
else
pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
if (ret) {
pr_err("%s: platform driver register failed for SR\n",
__func__);
return ret;
}
return 0;
}
static void __exit sr_exit(void)
{
platform_driver_unregister(&smartreflex_driver);
}
late_initcall(sr_init);
module_exit(sr_exit);
MODULE_DESCRIPTION("OMAP Smartreflex Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_AUTHOR("Texas Instruments Inc");
Reference in New Issue View Git Blame Copy Permalink