OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
d04c56f73c
linux/drivers/usb/atm/cxacru.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

875 lines
23 KiB
C
Raw Blame History

/******************************************************************************
* cxacru.c - driver for USB ADSL modems based on
* Conexant AccessRunner chipset
*
* Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan
* Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
******************************************************************************/
/*
* Credit is due for Josep Comas, who created the original patch to speedtch.c
* to support the different padding used by the AccessRunner (now generalized
* into usbatm), and the userspace firmware loading utility.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h> /* FIXME: linux/firmware.h should include it itself */
#include <linux/firmware.h>
#include <linux/mutex.h>
#include "usbatm.h"
#define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands"
#define DRIVER_VERSION "0.2"
#define DRIVER_DESC "Conexant AccessRunner ADSL USB modem driver"
static const char cxacru_driver_name[] = "cxacru";
#define CXACRU_EP_CMD 0x01 /* Bulk/interrupt in/out */
#define CXACRU_EP_DATA 0x02 /* Bulk in/out */
#define CMD_PACKET_SIZE 64 /* Should be maxpacket(ep)? */
/* Addresses */
#define PLLFCLK_ADDR 0x00350068
#define PLLBCLK_ADDR 0x0035006c
#define SDRAMEN_ADDR 0x00350010
#define FW_ADDR 0x00801000
#define BR_ADDR 0x00180600
#define SIG_ADDR 0x00180500
#define BR_STACK_ADDR 0x00187f10
/* Values */
#define SDRAM_ENA 0x1
#define CMD_TIMEOUT 2000 /* msecs */
#define POLL_INTERVAL 5000 /* msecs */
/* commands for interaction with the modem through the control channel before
* firmware is loaded */
enum cxacru_fw_request {
FW_CMD_ERR,
FW_GET_VER,
FW_READ_MEM,
FW_WRITE_MEM,
FW_RMW_MEM,
FW_CHECKSUM_MEM,
FW_GOTO_MEM,
};
/* commands for interaction with the modem through the control channel once
* firmware is loaded */
enum cxacru_cm_request {
CM_REQUEST_UNDEFINED = 0x80,
CM_REQUEST_TEST,
CM_REQUEST_CHIP_GET_MAC_ADDRESS,
CM_REQUEST_CHIP_GET_DP_VERSIONS,
CM_REQUEST_CHIP_ADSL_LINE_START,
CM_REQUEST_CHIP_ADSL_LINE_STOP,
CM_REQUEST_CHIP_ADSL_LINE_GET_STATUS,
CM_REQUEST_CHIP_ADSL_LINE_GET_SPEED,
CM_REQUEST_CARD_INFO_GET,
CM_REQUEST_CARD_DATA_GET,
CM_REQUEST_CARD_DATA_SET,
CM_REQUEST_COMMAND_HW_IO,
CM_REQUEST_INTERFACE_HW_IO,
CM_REQUEST_CARD_SERIAL_DATA_PATH_GET,
CM_REQUEST_CARD_SERIAL_DATA_PATH_SET,
CM_REQUEST_CARD_CONTROLLER_VERSION_GET,
CM_REQUEST_CARD_GET_STATUS,
CM_REQUEST_CARD_GET_MAC_ADDRESS,
CM_REQUEST_CARD_GET_DATA_LINK_STATUS,
CM_REQUEST_MAX,
};
/* reply codes to the commands above */
enum cxacru_cm_status {
CM_STATUS_UNDEFINED,
CM_STATUS_SUCCESS,
CM_STATUS_ERROR,
CM_STATUS_UNSUPPORTED,
CM_STATUS_UNIMPLEMENTED,
CM_STATUS_PARAMETER_ERROR,
CM_STATUS_DBG_LOOPBACK,
CM_STATUS_MAX,
};
/* indices into CARD_INFO_GET return array */
enum cxacru_info_idx {
CXINF_DOWNSTREAM_RATE,
CXINF_UPSTREAM_RATE,
CXINF_LINK_STATUS,
CXINF_LINE_STATUS,
CXINF_MAC_ADDRESS_HIGH,
CXINF_MAC_ADDRESS_LOW,
CXINF_UPSTREAM_SNR_MARGIN,
CXINF_DOWNSTREAM_SNR_MARGIN,
CXINF_UPSTREAM_ATTENUATION,
CXINF_DOWNSTREAM_ATTENUATION,
CXINF_TRANSMITTER_POWER,
CXINF_UPSTREAM_BITS_PER_FRAME,
CXINF_DOWNSTREAM_BITS_PER_FRAME,
CXINF_STARTUP_ATTEMPTS,
CXINF_UPSTREAM_CRC_ERRORS,
CXINF_DOWNSTREAM_CRC_ERRORS,
CXINF_UPSTREAM_FEC_ERRORS,
CXINF_DOWNSTREAM_FEC_ERRORS,
CXINF_UPSTREAM_HEC_ERRORS,
CXINF_DOWNSTREAM_HEC_ERRORS,
CXINF_LINE_STARTABLE,
CXINF_MODULATION,
CXINF_ADSL_HEADEND,
CXINF_ADSL_HEADEND_ENVIRONMENT,
CXINF_CONTROLLER_VERSION,
/* dunno what the missing two mean */
CXINF_MAX = 0x1c,
};
struct cxacru_modem_type {
u32 pll_f_clk;
u32 pll_b_clk;
int boot_rom_patch;
};
struct cxacru_data {
struct usbatm_data *usbatm;
const struct cxacru_modem_type *modem_type;
int line_status;
struct work_struct poll_work;
/* contol handles */
struct mutex cm_serialize;
u8 *rcv_buf;
u8 *snd_buf;
struct urb *rcv_urb;
struct urb *snd_urb;
struct completion rcv_done;
struct completion snd_done;
};
/* the following three functions are stolen from drivers/usb/core/message.c */
static void cxacru_blocking_completion(struct urb *urb)
{
complete((struct completion *)urb->context);
}
static void cxacru_timeout_kill(unsigned long data)
{
usb_unlink_urb((struct urb *) data);
}
static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
int* actual_length)
{
struct timer_list timer;
int status;
init_timer(&timer);
timer.expires = jiffies + msecs_to_jiffies(CMD_TIMEOUT);
timer.data = (unsigned long) urb;
timer.function = cxacru_timeout_kill;
add_timer(&timer);
wait_for_completion(done);
status = urb->status;
if (status == -ECONNRESET)
status = -ETIMEDOUT;
del_timer_sync(&timer);
if (actual_length)
*actual_length = urb->actual_length;
return status;
}
static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
u8 *wdata, int wsize, u8 *rdata, int rsize)
{
int ret, actlen;
int offb, offd;
const int stride = CMD_PACKET_SIZE - 4;
u8 *wbuf = instance->snd_buf;
u8 *rbuf = instance->rcv_buf;
int wbuflen = ((wsize - 1) / stride + 1) * CMD_PACKET_SIZE;
int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE;
if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) {
dbg("too big transfer requested");
ret = -ENOMEM;
goto fail;
}
mutex_lock(&instance->cm_serialize);
/* submit reading urb before the writing one */
init_completion(&instance->rcv_done);
ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL);
if (ret < 0) {
dbg("submitting read urb for cm %#x failed", cm);
ret = ret;
goto fail;
}
memset(wbuf, 0, wbuflen);
/* handle wsize == 0 */
wbuf[0] = cm;
for (offb = offd = 0; offd < wsize; offd += stride, offb += CMD_PACKET_SIZE) {
wbuf[offb] = cm;
memcpy(wbuf + offb + 4, wdata + offd, min_t(int, stride, wsize - offd));
}
instance->snd_urb->transfer_buffer_length = wbuflen;
init_completion(&instance->snd_done);
ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL);
if (ret < 0) {
dbg("submitting write urb for cm %#x failed", cm);
ret = ret;
goto fail;
}
ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, NULL);
if (ret < 0) {
dbg("sending cm %#x failed", cm);
ret = ret;
goto fail;
}
ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, &actlen);
if (ret < 0) {
dbg("receiving cm %#x failed", cm);
ret = ret;
goto fail;
}
if (actlen % CMD_PACKET_SIZE || !actlen) {
dbg("response is not a positive multiple of %d: %#x",
CMD_PACKET_SIZE, actlen);
ret = -EIO;
goto fail;
}
/* check the return status and copy the data to the output buffer, if needed */
for (offb = offd = 0; offd < rsize && offb < actlen; offb += CMD_PACKET_SIZE) {
if (rbuf[offb] != cm) {
dbg("wrong cm %#x in response", rbuf[offb]);
ret = -EIO;
goto fail;
}
if (rbuf[offb + 1] != CM_STATUS_SUCCESS) {
dbg("response failed: %#x", rbuf[offb + 1]);
ret = -EIO;
goto fail;
}
if (offd >= rsize)
break;
memcpy(rdata + offd, rbuf + offb + 4, min_t(int, stride, rsize - offd));
offd += stride;
}
ret = offd;
dbg("cm %#x", cm);
fail:
mutex_unlock(&instance->cm_serialize);
return ret;
}
static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_request cm,
u32 *data, int size)
{
int ret, len;
u32 *buf;
int offb, offd;
const int stride = CMD_PACKET_SIZE / (4 * 2) - 1;
int buflen = ((size - 1) / stride + 1 + size * 2) * 4;
buf = kmalloc(buflen, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = cxacru_cm(instance, cm, NULL, 0, (u8 *) buf, buflen);
if (ret < 0)
goto cleanup;
/* len > 0 && len % 4 == 0 guaranteed by cxacru_cm() */
len = ret / 4;
for (offb = 0; offb < len; ) {
int l = le32_to_cpu(buf[offb++]);
if (l > stride || l > (len - offb) / 2) {
dbg("wrong data length %#x in response", l);
ret = -EIO;
goto cleanup;
}
while (l--) {
offd = le32_to_cpu(buf[offb++]);
if (offd >= size) {
dbg("wrong index %#x in response", offd);
ret = -EIO;
goto cleanup;
}
data[offd] = le32_to_cpu(buf[offb++]);
}
}
ret = 0;
cleanup:
kfree(buf);
return ret;
}
static int cxacru_card_status(struct cxacru_data *instance)
{
int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
if (ret < 0) { /* firmware not loaded */
dbg("cxacru_adsl_start: CARD_GET_STATUS returned %d", ret);
return ret;
}
return 0;
}
static void cxacru_poll_status(struct cxacru_data *instance);
static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
struct atm_dev *atm_dev)
{
struct cxacru_data *instance = usbatm_instance->driver_data;
/*
struct atm_dev *atm_dev = usbatm_instance->atm_dev;
*/
int ret;
dbg("cxacru_atm_start");
/* Read MAC address */
ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
atm_dev->esi, sizeof(atm_dev->esi));
if (ret < 0) {
atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
return ret;
}
/* start ADSL */
ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
if (ret < 0) {
atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
return ret;
}
/* Start status polling */
cxacru_poll_status(instance);
return 0;
}
static void cxacru_poll_status(struct cxacru_data *instance)
{
u32 buf[CXINF_MAX] = {};
struct usbatm_data *usbatm = instance->usbatm;
struct atm_dev *atm_dev = usbatm->atm_dev;
int ret;
ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX);
if (ret < 0) {
atm_warn(usbatm, "poll status: error %d\n", ret);
goto reschedule;
}
if (instance->line_status == buf[CXINF_LINE_STATUS])
goto reschedule;
instance->line_status = buf[CXINF_LINE_STATUS];
switch (instance->line_status) {
case 0:
atm_dev->signal = ATM_PHY_SIG_LOST;
atm_info(usbatm, "ADSL line: down\n");
break;
case 1:
atm_dev->signal = ATM_PHY_SIG_LOST;
atm_info(usbatm, "ADSL line: attempting to activate\n");
break;
case 2:
atm_dev->signal = ATM_PHY_SIG_LOST;
atm_info(usbatm, "ADSL line: training\n");
break;
case 3:
atm_dev->signal = ATM_PHY_SIG_LOST;
atm_info(usbatm, "ADSL line: channel analysis\n");
break;
case 4:
atm_dev->signal = ATM_PHY_SIG_LOST;
atm_info(usbatm, "ADSL line: exchange\n");
break;
case 5:
atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
atm_dev->signal = ATM_PHY_SIG_FOUND;
atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
break;
case 6:
atm_dev->signal = ATM_PHY_SIG_LOST;
atm_info(usbatm, "ADSL line: waiting\n");
break;
case 7:
atm_dev->signal = ATM_PHY_SIG_LOST;
atm_info(usbatm, "ADSL line: initializing\n");
break;
default:
atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
break;
}
reschedule:
schedule_delayed_work(&instance->poll_work, msecs_to_jiffies(POLL_INTERVAL));
}
static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
u8 code1, u8 code2, u32 addr, u8 *data, int size)
{
int ret;
u8 *buf;
int offd, offb;
const int stride = CMD_PACKET_SIZE - 8;
buf = (u8 *) __get_free_page(GFP_KERNEL);
if (!buf)
return -ENOMEM;
offb = offd = 0;
do {
int l = min_t(int, stride, size - offd);
buf[offb++] = fw;
buf[offb++] = l;
buf[offb++] = code1;
buf[offb++] = code2;
*((u32 *) (buf + offb)) = cpu_to_le32(addr);
offb += 4;
addr += l;
if(l)
memcpy(buf + offb, data + offd, l);
if (l < stride)
memset(buf + offb + l, 0, stride - l);
offb += stride;
offd += stride;
if ((offb >= PAGE_SIZE) || (offd >= size)) {
ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
buf, offb, NULL, CMD_TIMEOUT);
if (ret < 0) {
dbg("sending fw %#x failed", fw);
goto cleanup;
}
offb = 0;
}
} while(offd < size);
dbg("sent fw %#x", fw);
ret = 0;
cleanup:
free_page((unsigned long) buf);
return ret;
}
static void cxacru_upload_firmware(struct cxacru_data *instance,
const struct firmware *fw,
const struct firmware *bp,
const struct firmware *cf)
{
int ret;
int off;
struct usbatm_data *usbatm = instance->usbatm;
struct usb_device *usb_dev = usbatm->usb_dev;
u16 signature[] = { usb_dev->descriptor.idVendor, usb_dev->descriptor.idProduct };
u32 val;
dbg("cxacru_upload_firmware");
/* FirmwarePllFClkValue */
val = cpu_to_le32(instance->modem_type->pll_f_clk);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4);
if (ret) {
usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret);
return;
}
/* FirmwarePllBClkValue */
val = cpu_to_le32(instance->modem_type->pll_b_clk);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4);
if (ret) {
usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret);
return;
}
/* Enable SDRAM */
val = cpu_to_le32(SDRAM_ENA);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4);
if (ret) {
usb_err(usbatm, "Enable SDRAM failed: %d\n", ret);
return;
}
/* Firmware */
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size);
if (ret) {
usb_err(usbatm, "Firmware upload failed: %d\n", ret);
return;
}
/* Boot ROM patch */
if (instance->modem_type->boot_rom_patch) {
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size);
if (ret) {
usb_err(usbatm, "Boot ROM patching failed: %d\n", ret);
return;
}
}
/* Signature */
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4);
if (ret) {
usb_err(usbatm, "Signature storing failed: %d\n", ret);
return;
}
if (instance->modem_type->boot_rom_patch) {
val = cpu_to_le32(BR_ADDR);
ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4);
}
else {
ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
}
if (ret) {
usb_err(usbatm, "Passing control to firmware failed: %d\n", ret);
return;
}
/* Delay to allow firmware to start up. */
msleep_interruptible(1000);
usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD));
usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD));
usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_DATA));
usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_DATA));
ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
if (ret < 0) {
usb_err(usbatm, "modem failed to initialize: %d\n", ret);
return;
}
/* Load config data (le32), doing one packet at a time */
if (cf)
for (off = 0; off < cf->size / 4; ) {
u32 buf[CMD_PACKET_SIZE / 4 - 1];
int i, len = min_t(int, cf->size / 4 - off, CMD_PACKET_SIZE / 4 / 2 - 1);
buf[0] = cpu_to_le32(len);
for (i = 0; i < len; i++, off++) {
buf[i * 2 + 1] = cpu_to_le32(off);
memcpy(buf + i * 2 + 2, cf->data + off * 4, 4);
}
ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
(u8 *) buf, len, NULL, 0);
if (ret < 0) {
usb_err(usbatm, "load config data failed: %d\n", ret);
return;
}
}
msleep_interruptible(4000);
}
static int cxacru_find_firmware(struct cxacru_data *instance,
char* phase, const struct firmware **fw_p)
{
struct usbatm_data *usbatm = instance->usbatm;
struct device *dev = &usbatm->usb_intf->dev;
char buf[16];
sprintf(buf, "cxacru-%s.bin", phase);
dbg("cxacru_find_firmware: looking for %s", buf);
if (request_firmware(fw_p, buf, dev)) {
usb_dbg(usbatm, "no stage %s firmware found\n", phase);
return -ENOENT;
}
usb_info(usbatm, "found firmware %s\n", buf);
return 0;
}
static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
struct usb_interface *usb_intf)
{
const struct firmware *fw, *bp, *cf;
struct cxacru_data *instance = usbatm_instance->driver_data;
int ret = cxacru_find_firmware(instance, "fw", &fw);
if (ret) {
usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n");
return ret;
}
if (instance->modem_type->boot_rom_patch) {
ret = cxacru_find_firmware(instance, "bp", &bp);
if (ret) {
usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n");
release_firmware(fw);
return ret;
}
}
if (cxacru_find_firmware(instance, "cf", &cf)) /* optional */
cf = NULL;
cxacru_upload_firmware(instance, fw, bp, cf);
if (cf)
release_firmware(cf);
if (instance->modem_type->boot_rom_patch)
release_firmware(bp);
release_firmware(fw);
ret = cxacru_card_status(instance);
if (ret)
dbg("modem initialisation failed");
else
dbg("done setting up the modem");
return ret;
}
static int cxacru_bind(struct usbatm_data *usbatm_instance,
struct usb_interface *intf, const struct usb_device_id *id)
{
struct cxacru_data *instance;
struct usb_device *usb_dev = interface_to_usbdev(intf);
int ret;
/* instance init */
instance = kzalloc(sizeof(*instance), GFP_KERNEL);
if (!instance) {
dbg("cxacru_bind: no memory for instance data");
return -ENOMEM;
}
instance->usbatm = usbatm_instance;
instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL);
if (!instance->rcv_buf) {
dbg("cxacru_bind: no memory for rcv_buf");
ret = -ENOMEM;
goto fail;
}
instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL);
if (!instance->snd_buf) {
dbg("cxacru_bind: no memory for snd_buf");
ret = -ENOMEM;
goto fail;
}
instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!instance->rcv_urb) {
dbg("cxacru_bind: no memory for rcv_urb");
ret = -ENOMEM;
goto fail;
}
instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!instance->snd_urb) {
dbg("cxacru_bind: no memory for snd_urb");
ret = -ENOMEM;
goto fail;
}
usb_fill_int_urb(instance->rcv_urb,
usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
instance->rcv_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->rcv_done, 1);
usb_fill_int_urb(instance->snd_urb,
usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
instance->snd_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->snd_done, 4);
mutex_init(&instance->cm_serialize);
INIT_WORK(&instance->poll_work, (void *)cxacru_poll_status, instance);
usbatm_instance->driver_data = instance;
usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT);
return 0;
fail:
free_page((unsigned long) instance->snd_buf);
free_page((unsigned long) instance->rcv_buf);
usb_free_urb(instance->snd_urb);
usb_free_urb(instance->rcv_urb);
kfree(instance);
return ret;
}
static void cxacru_unbind(struct usbatm_data *usbatm_instance,
struct usb_interface *intf)
{
struct cxacru_data *instance = usbatm_instance->driver_data;
dbg("cxacru_unbind entered");
if (!instance) {
dbg("cxacru_unbind: NULL instance!");
return;
}
while (!cancel_delayed_work(&instance->poll_work))
flush_scheduled_work();
usb_kill_urb(instance->snd_urb);
usb_kill_urb(instance->rcv_urb);
usb_free_urb(instance->snd_urb);
usb_free_urb(instance->rcv_urb);
free_page((unsigned long) instance->snd_buf);
free_page((unsigned long) instance->rcv_buf);
kfree(instance);
usbatm_instance->driver_data = NULL;
}
static const struct cxacru_modem_type cxacru_cafe = {
.pll_f_clk = 0x02d874df,
.pll_b_clk = 0x0196a51a,
.boot_rom_patch = 1,
};
static const struct cxacru_modem_type cxacru_cb00 = {
.pll_f_clk = 0x5,
.pll_b_clk = 0x3,
.boot_rom_patch = 0,
};
static const struct usb_device_id cxacru_usb_ids[] = {
{ /* V = Conexant P = ADSL modem (Euphrates project) */
USB_DEVICE(0x0572, 0xcafe), .driver_info = (unsigned long) &cxacru_cafe
},
{ /* V = Conexant P = ADSL modem (Hasbani project) */
USB_DEVICE(0x0572, 0xcb00), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Conexant P = ADSL modem */
USB_DEVICE(0x0572, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Conexant P = ADSL modem (Well PTI-800) */
USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Conexant P = ADSL modem */
USB_DEVICE(0x0572, 0xcb06), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Olitec P = ADSL modem version 2 */
USB_DEVICE(0x08e3, 0x0100), .driver_info = (unsigned long) &cxacru_cafe
},
{ /* V = Olitec P = ADSL modem version 3 */
USB_DEVICE(0x08e3, 0x0102), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Trust/Amigo Technology Co. P = AMX-CA86U */
USB_DEVICE(0x0eb0, 0x3457), .driver_info = (unsigned long) &cxacru_cafe
},
{ /* V = Zoom P = 5510 */
USB_DEVICE(0x1803, 0x5510), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Draytek P = Vigor 318 */
USB_DEVICE(0x0675, 0x0200), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Zyxel P = 630-C1 aka OMNI ADSL USB (Annex A) */
USB_DEVICE(0x0586, 0x330a), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Zyxel P = 630-C3 aka OMNI ADSL USB (Annex B) */
USB_DEVICE(0x0586, 0x330b), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Aethra P = Starmodem UM1020 */
USB_DEVICE(0x0659, 0x0020), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Aztech Systems P = ? AKA Pirelli AUA-010 */
USB_DEVICE(0x0509, 0x0812), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Netopia P = Cayman 3341(Annex A)/3351(Annex B) */
USB_DEVICE(0x100d, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
},
{ /* V = Netopia P = Cayman 3342(Annex A)/3352(Annex B) */
USB_DEVICE(0x100d, 0x3342), .driver_info = (unsigned long) &cxacru_cb00
},
{}
};
MODULE_DEVICE_TABLE(usb, cxacru_usb_ids);
static struct usbatm_driver cxacru_driver = {
.driver_name = cxacru_driver_name,
.bind = cxacru_bind,
.heavy_init = cxacru_heavy_init,
.unbind = cxacru_unbind,
.atm_start = cxacru_atm_start,
.bulk_in = CXACRU_EP_DATA,
.bulk_out = CXACRU_EP_DATA,
.rx_padding = 3,
.tx_padding = 11,
};
static int cxacru_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
return usbatm_usb_probe(intf, id, &cxacru_driver);
}
static struct usb_driver cxacru_usb_driver = {
.name = cxacru_driver_name,
.probe = cxacru_usb_probe,
.disconnect = usbatm_usb_disconnect,
.id_table = cxacru_usb_ids
};
static int __init cxacru_init(void)
{
return usb_register(&cxacru_usb_driver);
}
static void __exit cxacru_cleanup(void)
{
usb_deregister(&cxacru_usb_driver);
}
module_init(cxacru_init);
module_exit(cxacru_cleanup);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
Reference in New Issue View Git Blame Copy Permalink