linux/arch/arm/boot/dts/armada-38x-solidrun-microso...

105 lines
2.1 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree file for SolidRun Armada 38x Microsom
*
* Copyright (C) 2015 Russell King
*/
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>; /* 256 MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
rtc@a3800 {
/*
* If the rtc doesn't work, run "date reset"
* twice in u-boot.
*/
status = "okay";
};
};
};
};
&bm {
status = "okay";
};
&bm_bppi {
status = "okay";
};
&eth0 {
/* ethernet@70000 */
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
phy = <&phy_dedicated>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <1>;
status = "okay";
};
&mdio {
/*
* Add the phy clock here, so the phy can be accessed to read its
* IDs prior to binding with the driver.
*/
pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
pinctrl-names = "default";
phy_dedicated: ethernet-phy@0 {
/*
* Annoyingly, the marvell phy driver configures the LED
* register, rather than preserving reset-loaded setting.
* We undo that rubbish here.
*/
marvell,reg-init = <3 16 0 0x101e>;
reg = <0>;
};
};
&pinctrl {
microsom_phy_clk_pins: microsom-phy-clk-pins {
marvell,pins = "mpp45";
marvell,function = "ref";
};
/* Optional eMMC */
microsom_sdhci_pins: microsom-sdhci-pins {
marvell,pins = "mpp21", "mpp28", "mpp37",
"mpp38", "mpp39", "mpp40";
marvell,function = "sd0";
};
};
&spi1 {
/* The microsom has an optional W25Q32 on board, connected to CS0 */
pinctrl-0 = <&spi1_pins>;
w25q32: spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q32", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <3000000>;
};
};
&uart0 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
status = "okay";
};