Go to file
Johan Hovold d2efbbd18b gnss: add driver for sirfstar-based receivers
Add driver for serial-connected SiRFstar-based GNSS receivers.

These devices typically boot into hibernate mode from which they can be
woken using a pulse on the ON_OFF input pin. Once active, a pulse on the
same ON_OFF pin is used to put the device back into hibernate mode. The
current state can be determined by sampling the WAKEUP output.

Hardware configurations where WAKEUP has been connected to ON_OFF (and
where an initial WAKEUP pulse during boot is sufficient to have the
device boot into active mode) are also supported. In this case, device
power is managed using the main-supply regulator only.

Note that configurations where WAKEUP is left not connected, so that the
device power state can only indirectly be determined using the I/O
interface, is currently not supported. It should be fairly
straight-forward to extend the current implementation with such support
however (and this this is the main reason for not using the generic
serial implementation for this driver).

Note that timepulse-support is left unimplemented.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-28 20:32:51 +09:00
Documentation dt-bindings: gnss: add sirfstar binding 2018-06-28 20:32:51 +09:00
LICENSES LICENSES: Add Linux-OpenIB license text 2018-04-27 16:41:53 -06:00
arch Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-06-24 20:29:15 +08:00
block for-linus-20180623 2018-06-24 06:33:54 +08:00
certs docs: Fix some broken references 2018-06-15 18:10:01 -03:00
crypto Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2018-06-24 06:31:54 +08:00
drivers gnss: add driver for sirfstar-based receivers 2018-06-28 20:32:51 +09:00
firmware kbuild: remove all dummy assignments to obj- 2017-11-18 11:46:06 +09:00
fs \n 2018-06-22 18:04:56 +09:00
include gnss: add GNSS receiver subsystem 2018-06-28 20:29:47 +09:00
init dma-mapping: move all DMA mapping code to kernel/dma 2018-06-14 08:50:37 +02:00
ipc ipc: use new return type vm_fault_t 2018-06-15 07:55:25 +09:00
kernel Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-06-24 20:29:15 +08:00
lib Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-06-24 19:36:16 +08:00
mm for-linus-20180623 2018-06-24 06:33:54 +08:00
net NFS client bugfixes for Linux 4.18 2018-06-22 06:21:34 +09:00
samples VFIO updates for v4.18 2018-06-12 13:11:26 -07:00
scripts tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount 2018-06-21 15:12:56 -04:00
security docs: Fix some broken references 2018-06-15 18:10:01 -03:00
sound docs: Fix some broken references 2018-06-15 18:10:01 -03:00
tools Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2018-06-24 20:29:15 +08:00
usr kbuild: rename built-in.o to built-in.a 2018-03-26 02:01:19 +09:00
virt KVM: arm64: Prevent KVM_COMPAT from being selected 2018-06-21 17:17:50 +01:00
.clang-format clang-format: add configuration file 2018-04-11 10:28:35 -07:00
.cocciconfig
.get_maintainer.ignore
.gitattributes .gitattributes: set git diff driver for C source code files 2016-10-07 18:46:30 -07:00
.gitignore Kbuild updates for v4.17 (2nd) 2018-04-15 17:21:30 -07:00
.mailmap Merge branch 'asoc-4.17' into asoc-4.18 for compress dependencies 2018-04-26 12:24:28 +01:00
COPYING COPYING: use the new text with points to the license files 2018-03-23 12:41:45 -06:00
CREDITS MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE 2018-03-05 16:34:24 +00:00
Kbuild Kbuild updates for v4.15 2017-11-17 17:45:29 -08:00
Kconfig kconfig: add basic helper macros to scripts/Kconfig.include 2018-05-29 03:31:19 +09:00
MAINTAINERS dt-bindings: add generic gnss binding 2018-06-28 20:31:32 +09:00
Makefile Linux 4.18-rc2 2018-06-24 20:54:29 +08:00
README Docs: Added a pointer to the formatted docs to README 2018-03-21 09:02:53 -06:00

README

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
See Documentation/00-INDEX for a list of what is contained in each file.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.