969c45b98b
The following build warning is seen if CONFIG_OF is disabled. drivers/hwmon/max6621.c:573:34: warning: ‘max6621_of_match’ defined but not used Mark max6621_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
576 lines
14 KiB
C
576 lines
14 KiB
C
/*
|
|
* Hardware monitoring driver for Maxim MAX6621
|
|
*
|
|
* Copyright (c) 2017 Mellanox Technologies. All rights reserved.
|
|
* Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define MAX6621_DRV_NAME "max6621"
|
|
#define MAX6621_TEMP_INPUT_REG_NUM 9
|
|
#define MAX6621_TEMP_INPUT_MIN -127000
|
|
#define MAX6621_TEMP_INPUT_MAX 128000
|
|
#define MAX6621_TEMP_ALERT_CHAN_SHIFT 1
|
|
|
|
#define MAX6621_TEMP_S0D0_REG 0x00
|
|
#define MAX6621_TEMP_S0D1_REG 0x01
|
|
#define MAX6621_TEMP_S1D0_REG 0x02
|
|
#define MAX6621_TEMP_S1D1_REG 0x03
|
|
#define MAX6621_TEMP_S2D0_REG 0x04
|
|
#define MAX6621_TEMP_S2D1_REG 0x05
|
|
#define MAX6621_TEMP_S3D0_REG 0x06
|
|
#define MAX6621_TEMP_S3D1_REG 0x07
|
|
#define MAX6621_TEMP_MAX_REG 0x08
|
|
#define MAX6621_TEMP_MAX_ADDR_REG 0x0a
|
|
#define MAX6621_TEMP_ALERT_CAUSE_REG 0x0b
|
|
#define MAX6621_CONFIG0_REG 0x0c
|
|
#define MAX6621_CONFIG1_REG 0x0d
|
|
#define MAX6621_CONFIG2_REG 0x0e
|
|
#define MAX6621_CONFIG3_REG 0x0f
|
|
#define MAX6621_TEMP_S0_ALERT_REG 0x10
|
|
#define MAX6621_TEMP_S1_ALERT_REG 0x11
|
|
#define MAX6621_TEMP_S2_ALERT_REG 0x12
|
|
#define MAX6621_TEMP_S3_ALERT_REG 0x13
|
|
#define MAX6621_CLEAR_ALERT_REG 0x15
|
|
#define MAX6621_REG_MAX (MAX6621_CLEAR_ALERT_REG + 1)
|
|
#define MAX6621_REG_TEMP_SHIFT 0x06
|
|
|
|
#define MAX6621_ENABLE_TEMP_ALERTS_BIT 4
|
|
#define MAX6621_ENABLE_I2C_CRC_BIT 5
|
|
#define MAX6621_ENABLE_ALTERNATE_DATA 6
|
|
#define MAX6621_ENABLE_LOCKUP_TO 7
|
|
#define MAX6621_ENABLE_S0D0_BIT 8
|
|
#define MAX6621_ENABLE_S3D1_BIT 15
|
|
#define MAX6621_ENABLE_TEMP_ALL GENMASK(MAX6621_ENABLE_S3D1_BIT, \
|
|
MAX6621_ENABLE_S0D0_BIT)
|
|
#define MAX6621_POLL_DELAY_MASK 0x5
|
|
#define MAX6621_CONFIG0_INIT (MAX6621_ENABLE_TEMP_ALL | \
|
|
BIT(MAX6621_ENABLE_LOCKUP_TO) | \
|
|
BIT(MAX6621_ENABLE_I2C_CRC_BIT) | \
|
|
MAX6621_POLL_DELAY_MASK)
|
|
#define MAX6621_PECI_BIT_TIME 0x2
|
|
#define MAX6621_PECI_RETRY_NUM 0x3
|
|
#define MAX6621_CONFIG1_INIT ((MAX6621_PECI_BIT_TIME << 8) | \
|
|
MAX6621_PECI_RETRY_NUM)
|
|
|
|
/* Error codes */
|
|
#define MAX6621_TRAN_FAILED 0x8100 /*
|
|
* PECI transaction failed for more
|
|
* than the configured number of
|
|
* consecutive retries.
|
|
*/
|
|
#define MAX6621_POOL_DIS 0x8101 /*
|
|
* Polling disabled for requested
|
|
* socket/domain.
|
|
*/
|
|
#define MAX6621_POOL_UNCOMPLETE 0x8102 /*
|
|
* First poll not yet completed for
|
|
* requested socket/domain (on
|
|
* startup).
|
|
*/
|
|
#define MAX6621_SD_DIS 0x8103 /*
|
|
* Read maximum temperature requested,
|
|
* but no sockets/domains enabled or
|
|
* all enabled sockets/domains have
|
|
* errors; or read maximum temperature
|
|
* address requested, but read maximum
|
|
* temperature was not called.
|
|
*/
|
|
#define MAX6621_ALERT_DIS 0x8104 /*
|
|
* Get alert socket/domain requested,
|
|
* but no alert active.
|
|
*/
|
|
#define MAX6621_PECI_ERR_MIN 0x8000 /* Intel spec PECI error min value. */
|
|
#define MAX6621_PECI_ERR_MAX 0x80ff /* Intel spec PECI error max value. */
|
|
|
|
static const u32 max6621_temp_regs[] = {
|
|
MAX6621_TEMP_MAX_REG, MAX6621_TEMP_S0D0_REG, MAX6621_TEMP_S1D0_REG,
|
|
MAX6621_TEMP_S2D0_REG, MAX6621_TEMP_S3D0_REG, MAX6621_TEMP_S0D1_REG,
|
|
MAX6621_TEMP_S1D1_REG, MAX6621_TEMP_S2D1_REG, MAX6621_TEMP_S3D1_REG,
|
|
};
|
|
|
|
static const char *const max6621_temp_labels[] = {
|
|
"maximum",
|
|
"socket0_0",
|
|
"socket1_0",
|
|
"socket2_0",
|
|
"socket3_0",
|
|
"socket0_1",
|
|
"socket1_1",
|
|
"socket2_1",
|
|
"socket3_1",
|
|
};
|
|
|
|
static const int max6621_temp_alert_chan2reg[] = {
|
|
MAX6621_TEMP_S0_ALERT_REG,
|
|
MAX6621_TEMP_S1_ALERT_REG,
|
|
MAX6621_TEMP_S2_ALERT_REG,
|
|
MAX6621_TEMP_S3_ALERT_REG,
|
|
};
|
|
|
|
/**
|
|
* struct max6621_data - private data:
|
|
*
|
|
* @client: I2C client;
|
|
* @regmap: register map handle;
|
|
* @input_chan2reg: mapping from channel to register;
|
|
*/
|
|
struct max6621_data {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
int input_chan2reg[MAX6621_TEMP_INPUT_REG_NUM + 1];
|
|
};
|
|
|
|
static long max6621_temp_mc2reg(long val)
|
|
{
|
|
return (val / 1000L) << MAX6621_REG_TEMP_SHIFT;
|
|
}
|
|
|
|
static umode_t
|
|
max6621_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
|
|
int channel)
|
|
{
|
|
/* Skip channels which are not physically conncted. */
|
|
if (((struct max6621_data *)data)->input_chan2reg[channel] < 0)
|
|
return 0;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_label:
|
|
case hwmon_temp_crit_alarm:
|
|
return 0444;
|
|
case hwmon_temp_offset:
|
|
case hwmon_temp_crit:
|
|
return 0644;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max6621_verify_reg_data(struct device *dev, int regval)
|
|
{
|
|
if (regval >= MAX6621_PECI_ERR_MIN &&
|
|
regval <= MAX6621_PECI_ERR_MAX) {
|
|
dev_dbg(dev, "PECI error code - err 0x%04x.\n",
|
|
regval);
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
switch (regval) {
|
|
case MAX6621_TRAN_FAILED:
|
|
dev_dbg(dev, "PECI transaction failed - err 0x%04x.\n",
|
|
regval);
|
|
return -EIO;
|
|
case MAX6621_POOL_DIS:
|
|
dev_dbg(dev, "Polling disabled - err 0x%04x.\n", regval);
|
|
return -EOPNOTSUPP;
|
|
case MAX6621_POOL_UNCOMPLETE:
|
|
dev_dbg(dev, "First poll not completed on startup - err 0x%04x.\n",
|
|
regval);
|
|
return -EIO;
|
|
case MAX6621_SD_DIS:
|
|
dev_dbg(dev, "Resource is disabled - err 0x%04x.\n", regval);
|
|
return -EOPNOTSUPP;
|
|
case MAX6621_ALERT_DIS:
|
|
dev_dbg(dev, "No alert active - err 0x%04x.\n", regval);
|
|
return -EOPNOTSUPP;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int
|
|
max6621_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
|
|
int channel, long *val)
|
|
{
|
|
struct max6621_data *data = dev_get_drvdata(dev);
|
|
u32 regval;
|
|
int reg;
|
|
s8 temp;
|
|
int ret;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
reg = data->input_chan2reg[channel];
|
|
ret = regmap_read(data->regmap, reg, ®val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = max6621_verify_reg_data(dev, regval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Bit MAX6621_REG_TEMP_SHIFT represents 1 degree step.
|
|
* The temperature is given in two's complement and 8
|
|
* bits is used for the register conversion.
|
|
*/
|
|
temp = (regval >> MAX6621_REG_TEMP_SHIFT);
|
|
*val = temp * 1000L;
|
|
|
|
break;
|
|
case hwmon_temp_offset:
|
|
ret = regmap_read(data->regmap, MAX6621_CONFIG2_REG,
|
|
®val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = max6621_verify_reg_data(dev, regval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = (regval >> MAX6621_REG_TEMP_SHIFT) *
|
|
1000L;
|
|
|
|
break;
|
|
case hwmon_temp_crit:
|
|
channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
|
|
reg = max6621_temp_alert_chan2reg[channel];
|
|
ret = regmap_read(data->regmap, reg, ®val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = max6621_verify_reg_data(dev, regval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = regval * 1000L;
|
|
|
|
break;
|
|
case hwmon_temp_crit_alarm:
|
|
/*
|
|
* Set val to zero to recover the case, when reading
|
|
* MAX6621_TEMP_ALERT_CAUSE_REG results in for example
|
|
* MAX6621_ALERT_DIS. Reading will return with error,
|
|
* but in such case alarm should be returned as 0.
|
|
*/
|
|
*val = 0;
|
|
ret = regmap_read(data->regmap,
|
|
MAX6621_TEMP_ALERT_CAUSE_REG,
|
|
®val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = max6621_verify_reg_data(dev, regval);
|
|
if (ret) {
|
|
/* Do not report error if alert is disabled. */
|
|
if (regval == MAX6621_ALERT_DIS)
|
|
return 0;
|
|
else
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Clear the alert automatically, using send-byte
|
|
* smbus protocol for clearing alert.
|
|
*/
|
|
if (regval) {
|
|
ret = i2c_smbus_write_byte(data->client,
|
|
MAX6621_CLEAR_ALERT_REG);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
*val = !!regval;
|
|
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
max6621_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
|
|
int channel, long val)
|
|
{
|
|
struct max6621_data *data = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_offset:
|
|
/* Clamp to allowed range to prevent overflow. */
|
|
val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
|
|
MAX6621_TEMP_INPUT_MAX);
|
|
val = max6621_temp_mc2reg(val);
|
|
|
|
return regmap_write(data->regmap,
|
|
MAX6621_CONFIG2_REG, val);
|
|
case hwmon_temp_crit:
|
|
channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
|
|
reg = max6621_temp_alert_chan2reg[channel];
|
|
/* Clamp to allowed range to prevent overflow. */
|
|
val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
|
|
MAX6621_TEMP_INPUT_MAX);
|
|
val = val / 1000L;
|
|
|
|
return regmap_write(data->regmap, reg, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int
|
|
max6621_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
|
|
int channel, const char **str)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_label:
|
|
*str = max6621_temp_labels[channel];
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static bool max6621_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MAX6621_CONFIG0_REG:
|
|
case MAX6621_CONFIG1_REG:
|
|
case MAX6621_CONFIG2_REG:
|
|
case MAX6621_CONFIG3_REG:
|
|
case MAX6621_TEMP_S0_ALERT_REG:
|
|
case MAX6621_TEMP_S1_ALERT_REG:
|
|
case MAX6621_TEMP_S2_ALERT_REG:
|
|
case MAX6621_TEMP_S3_ALERT_REG:
|
|
case MAX6621_TEMP_ALERT_CAUSE_REG:
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool max6621_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MAX6621_TEMP_S0D0_REG:
|
|
case MAX6621_TEMP_S0D1_REG:
|
|
case MAX6621_TEMP_S1D0_REG:
|
|
case MAX6621_TEMP_S1D1_REG:
|
|
case MAX6621_TEMP_S2D0_REG:
|
|
case MAX6621_TEMP_S2D1_REG:
|
|
case MAX6621_TEMP_S3D0_REG:
|
|
case MAX6621_TEMP_S3D1_REG:
|
|
case MAX6621_TEMP_MAX_REG:
|
|
case MAX6621_TEMP_MAX_ADDR_REG:
|
|
case MAX6621_CONFIG0_REG:
|
|
case MAX6621_CONFIG1_REG:
|
|
case MAX6621_CONFIG2_REG:
|
|
case MAX6621_CONFIG3_REG:
|
|
case MAX6621_TEMP_S0_ALERT_REG:
|
|
case MAX6621_TEMP_S1_ALERT_REG:
|
|
case MAX6621_TEMP_S2_ALERT_REG:
|
|
case MAX6621_TEMP_S3_ALERT_REG:
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool max6621_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MAX6621_TEMP_S0D0_REG:
|
|
case MAX6621_TEMP_S0D1_REG:
|
|
case MAX6621_TEMP_S1D0_REG:
|
|
case MAX6621_TEMP_S1D1_REG:
|
|
case MAX6621_TEMP_S2D0_REG:
|
|
case MAX6621_TEMP_S2D1_REG:
|
|
case MAX6621_TEMP_S3D0_REG:
|
|
case MAX6621_TEMP_S3D1_REG:
|
|
case MAX6621_TEMP_MAX_REG:
|
|
case MAX6621_TEMP_S0_ALERT_REG:
|
|
case MAX6621_TEMP_S1_ALERT_REG:
|
|
case MAX6621_TEMP_S2_ALERT_REG:
|
|
case MAX6621_TEMP_S3_ALERT_REG:
|
|
case MAX6621_TEMP_ALERT_CAUSE_REG:
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static const struct reg_default max6621_regmap_default[] = {
|
|
{ MAX6621_CONFIG0_REG, MAX6621_CONFIG0_INIT },
|
|
{ MAX6621_CONFIG1_REG, MAX6621_CONFIG1_INIT },
|
|
};
|
|
|
|
static const struct regmap_config max6621_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.max_register = MAX6621_REG_MAX,
|
|
.val_format_endian = REGMAP_ENDIAN_LITTLE,
|
|
.cache_type = REGCACHE_FLAT,
|
|
.writeable_reg = max6621_writeable_reg,
|
|
.readable_reg = max6621_readable_reg,
|
|
.volatile_reg = max6621_volatile_reg,
|
|
.reg_defaults = max6621_regmap_default,
|
|
.num_reg_defaults = ARRAY_SIZE(max6621_regmap_default),
|
|
};
|
|
|
|
static const struct hwmon_channel_info *max6621_info[] = {
|
|
HWMON_CHANNEL_INFO(chip,
|
|
HWMON_C_REGISTER_TZ),
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
|
|
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops max6621_hwmon_ops = {
|
|
.read = max6621_read,
|
|
.write = max6621_write,
|
|
.read_string = max6621_read_string,
|
|
.is_visible = max6621_is_visible,
|
|
};
|
|
|
|
static const struct hwmon_chip_info max6621_chip_info = {
|
|
.ops = &max6621_hwmon_ops,
|
|
.info = max6621_info,
|
|
};
|
|
|
|
static int max6621_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct max6621_data *data;
|
|
struct device *hwmon_dev;
|
|
int i;
|
|
int ret;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &max6621_regmap_config);
|
|
if (IS_ERR(data->regmap))
|
|
return PTR_ERR(data->regmap);
|
|
|
|
i2c_set_clientdata(client, data);
|
|
data->client = client;
|
|
|
|
/* Set CONFIG0 register masking temperature alerts and PEC. */
|
|
ret = regmap_write(data->regmap, MAX6621_CONFIG0_REG,
|
|
MAX6621_CONFIG0_INIT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Set CONFIG1 register for PEC access retry number. */
|
|
ret = regmap_write(data->regmap, MAX6621_CONFIG1_REG,
|
|
MAX6621_CONFIG1_INIT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Sync registers with hardware. */
|
|
regcache_mark_dirty(data->regmap);
|
|
ret = regcache_sync(data->regmap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Verify which temperature input registers are enabled. */
|
|
for (i = 0; i < MAX6621_TEMP_INPUT_REG_NUM; i++) {
|
|
ret = i2c_smbus_read_word_data(client, max6621_temp_regs[i]);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = max6621_verify_reg_data(dev, ret);
|
|
if (ret) {
|
|
data->input_chan2reg[i] = -1;
|
|
continue;
|
|
}
|
|
|
|
data->input_chan2reg[i] = max6621_temp_regs[i];
|
|
}
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
|
data,
|
|
&max6621_chip_info,
|
|
NULL);
|
|
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id max6621_id[] = {
|
|
{ MAX6621_DRV_NAME, 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max6621_id);
|
|
|
|
static const struct of_device_id __maybe_unused max6621_of_match[] = {
|
|
{ .compatible = "maxim,max6621" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max6621_of_match);
|
|
|
|
static struct i2c_driver max6621_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = MAX6621_DRV_NAME,
|
|
.of_match_table = of_match_ptr(max6621_of_match),
|
|
},
|
|
.probe = max6621_probe,
|
|
.id_table = max6621_id,
|
|
};
|
|
|
|
module_i2c_driver(max6621_driver);
|
|
|
|
MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
|
|
MODULE_DESCRIPTION("Driver for Maxim MAX6621");
|
|
MODULE_LICENSE("GPL");
|