linux/drivers/uio/uio_fsl_elbc_gpcm.c

489 lines
12 KiB
C

/* uio_fsl_elbc_gpcm: UIO driver for eLBC/GPCM peripherals
Copyright (C) 2014 Linutronix GmbH
Author: John Ogness <john.ogness@linutronix.de>
This driver provides UIO access to memory of a peripheral connected
to the Freescale enhanced local bus controller (eLBC) interface
using the general purpose chip-select mode (GPCM).
Here is an example of the device tree entries:
localbus@ffe05000 {
ranges = <0x2 0x0 0x0 0xff810000 0x10000>;
dpm@2,0 {
compatible = "fsl,elbc-gpcm-uio";
reg = <0x2 0x0 0x10000>;
elbc-gpcm-br = <0xff810800>;
elbc-gpcm-or = <0xffff09f7>;
interrupt-parent = <&mpic>;
interrupts = <4 1>;
device_type = "netx5152";
uio_name = "netx_custom";
netx5152,init-win0-offset = <0x0>;
};
};
Only the entries reg (to identify bank) and elbc-gpcm-* (initial BR/OR
values) are required. The entries interrupt*, device_type, and uio_name
are optional (as well as any type-specific options such as
netx5152,init-win0-offset). As long as no interrupt handler is needed,
this driver can be used without any type-specific implementation.
The netx5152 type has been tested to work with the netX 51/52 hardware
from Hilscher using the Hilscher userspace netX stack.
The netx5152 type should serve as a model to add new type-specific
devices as needed.
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/uio_driver.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/fsl_lbc.h>
#define MAX_BANKS 8
struct fsl_elbc_gpcm {
struct device *dev;
struct fsl_lbc_regs __iomem *lbc;
u32 bank;
const char *name;
void (*init)(struct uio_info *info);
void (*shutdown)(struct uio_info *info, bool init_err);
irqreturn_t (*irq_handler)(int irq, struct uio_info *info);
};
static ssize_t reg_show(struct device *dev, struct device_attribute *attr,
char *buf);
static ssize_t reg_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
DEVICE_ATTR(reg_br, S_IRUGO|S_IWUSR|S_IWGRP, reg_show, reg_store);
DEVICE_ATTR(reg_or, S_IRUGO|S_IWUSR|S_IWGRP, reg_show, reg_store);
static ssize_t reg_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct platform_device *pdev = to_platform_device(dev);
struct uio_info *info = platform_get_drvdata(pdev);
struct fsl_elbc_gpcm *priv = info->priv;
struct fsl_lbc_bank *bank = &priv->lbc->bank[priv->bank];
if (attr == &dev_attr_reg_br) {
return scnprintf(buf, PAGE_SIZE, "0x%08x\n",
in_be32(&bank->br));
} else if (attr == &dev_attr_reg_or) {
return scnprintf(buf, PAGE_SIZE, "0x%08x\n",
in_be32(&bank->or));
}
return 0;
}
static ssize_t reg_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct platform_device *pdev = to_platform_device(dev);
struct uio_info *info = platform_get_drvdata(pdev);
struct fsl_elbc_gpcm *priv = info->priv;
struct fsl_lbc_bank *bank = &priv->lbc->bank[priv->bank];
unsigned long val;
u32 reg_br_cur;
u32 reg_or_cur;
u32 reg_new;
/* parse use input */
if (kstrtoul(buf, 0, &val) != 0)
return -EINVAL;
reg_new = (u32)val;
/* read current values */
reg_br_cur = in_be32(&bank->br);
reg_or_cur = in_be32(&bank->or);
if (attr == &dev_attr_reg_br) {
/* not allowed to change effective base address */
if ((reg_br_cur & reg_or_cur & BR_BA) !=
(reg_new & reg_or_cur & BR_BA)) {
return -EINVAL;
}
/* not allowed to change mode */
if ((reg_new & BR_MSEL) != BR_MS_GPCM)
return -EINVAL;
/* write new value (force valid) */
out_be32(&bank->br, reg_new | BR_V);
} else if (attr == &dev_attr_reg_or) {
/* not allowed to change access mask */
if ((reg_or_cur & OR_GPCM_AM) != (reg_new & OR_GPCM_AM))
return -EINVAL;
/* write new value */
out_be32(&bank->or, reg_new);
} else {
return -EINVAL;
}
return count;
}
#ifdef CONFIG_UIO_FSL_ELBC_GPCM_NETX5152
#define DPM_HOST_WIN0_OFFSET 0xff00
#define DPM_HOST_INT_STAT0 0xe0
#define DPM_HOST_INT_EN0 0xf0
#define DPM_HOST_INT_MASK 0xe600ffff
#define DPM_HOST_INT_GLOBAL_EN 0x80000000
static irqreturn_t netx5152_irq_handler(int irq, struct uio_info *info)
{
void __iomem *reg_int_en = info->mem[0].internal_addr +
DPM_HOST_WIN0_OFFSET +
DPM_HOST_INT_EN0;
void __iomem *reg_int_stat = info->mem[0].internal_addr +
DPM_HOST_WIN0_OFFSET +
DPM_HOST_INT_STAT0;
/* check if an interrupt is enabled and active */
if ((ioread32(reg_int_en) & ioread32(reg_int_stat) &
DPM_HOST_INT_MASK) == 0) {
return IRQ_NONE;
}
/* disable interrupts */
iowrite32(ioread32(reg_int_en) & ~DPM_HOST_INT_GLOBAL_EN, reg_int_en);
return IRQ_HANDLED;
}
static void netx5152_init(struct uio_info *info)
{
unsigned long win0_offset = DPM_HOST_WIN0_OFFSET;
struct fsl_elbc_gpcm *priv = info->priv;
const void *prop;
/* get an optional initial win0 offset */
prop = of_get_property(priv->dev->of_node,
"netx5152,init-win0-offset", NULL);
if (prop)
win0_offset = of_read_ulong(prop, 1);
/* disable interrupts */
iowrite32(0, info->mem[0].internal_addr + win0_offset +
DPM_HOST_INT_EN0);
}
static void netx5152_shutdown(struct uio_info *info, bool init_err)
{
if (init_err)
return;
/* disable interrupts */
iowrite32(0, info->mem[0].internal_addr + DPM_HOST_WIN0_OFFSET +
DPM_HOST_INT_EN0);
}
#endif
static void setup_periph(struct fsl_elbc_gpcm *priv,
const char *type)
{
#ifdef CONFIG_UIO_FSL_ELBC_GPCM_NETX5152
if (strcmp(type, "netx5152") == 0) {
priv->irq_handler = netx5152_irq_handler;
priv->init = netx5152_init;
priv->shutdown = netx5152_shutdown;
priv->name = "netX 51/52";
return;
}
#endif
}
static int check_of_data(struct fsl_elbc_gpcm *priv,
struct resource *res,
u32 reg_br, u32 reg_or)
{
/* check specified bank */
if (priv->bank >= MAX_BANKS) {
dev_err(priv->dev, "invalid bank\n");
return -ENODEV;
}
/* check specified mode (BR_MS_GPCM is 0) */
if ((reg_br & BR_MSEL) != BR_MS_GPCM) {
dev_err(priv->dev, "unsupported mode\n");
return -ENODEV;
}
/* check specified mask vs. resource size */
if ((~(reg_or & OR_GPCM_AM) + 1) != resource_size(res)) {
dev_err(priv->dev, "address mask / size mismatch\n");
return -ENODEV;
}
/* check specified address */
if ((reg_br & reg_or & BR_BA) != fsl_lbc_addr(res->start)) {
dev_err(priv->dev, "base address mismatch\n");
return -ENODEV;
}
return 0;
}
static int get_of_data(struct fsl_elbc_gpcm *priv, struct device_node *node,
struct resource *res, u32 *reg_br,
u32 *reg_or, unsigned int *irq, char **name)
{
const char *dt_name;
const char *type;
int ret;
/* get the memory resource */
ret = of_address_to_resource(node, 0, res);
if (ret) {
dev_err(priv->dev, "failed to get resource\n");
return ret;
}
/* get the bank number */
ret = of_property_read_u32(node, "reg", &priv->bank);
if (ret) {
dev_err(priv->dev, "failed to get bank number\n");
return ret;
}
/* get BR value to set */
ret = of_property_read_u32(node, "elbc-gpcm-br", reg_br);
if (ret) {
dev_err(priv->dev, "missing elbc-gpcm-br value\n");
return ret;
}
/* get OR value to set */
ret = of_property_read_u32(node, "elbc-gpcm-or", reg_or);
if (ret) {
dev_err(priv->dev, "missing elbc-gpcm-or value\n");
return ret;
}
/* get optional peripheral type */
priv->name = "generic";
if (of_property_read_string(node, "device_type", &type) == 0)
setup_periph(priv, type);
/* get optional irq value */
*irq = irq_of_parse_and_map(node, 0);
/* sanity check device tree data */
ret = check_of_data(priv, res, *reg_br, *reg_or);
if (ret)
return ret;
/* get optional uio name */
if (of_property_read_string(node, "uio_name", &dt_name) != 0)
dt_name = "eLBC_GPCM";
*name = kstrdup(dt_name, GFP_KERNEL);
if (!*name)
return -ENOMEM;
return 0;
}
static int uio_fsl_elbc_gpcm_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct fsl_elbc_gpcm *priv;
struct uio_info *info;
char *uio_name = NULL;
struct resource res;
unsigned int irq;
u32 reg_br_cur;
u32 reg_or_cur;
u32 reg_br_new;
u32 reg_or_new;
int ret;
if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
return -ENODEV;
/* allocate private data */
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = &pdev->dev;
priv->lbc = fsl_lbc_ctrl_dev->regs;
/* get device tree data */
ret = get_of_data(priv, node, &res, &reg_br_new, &reg_or_new,
&irq, &uio_name);
if (ret)
goto out_err0;
/* allocate UIO structure */
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
ret = -ENOMEM;
goto out_err0;
}
/* get current BR/OR values */
reg_br_cur = in_be32(&priv->lbc->bank[priv->bank].br);
reg_or_cur = in_be32(&priv->lbc->bank[priv->bank].or);
/* if bank already configured, make sure it matches */
if ((reg_br_cur & BR_V)) {
if ((reg_br_cur & BR_MSEL) != BR_MS_GPCM ||
(reg_br_cur & reg_or_cur & BR_BA)
!= fsl_lbc_addr(res.start)) {
dev_err(priv->dev,
"bank in use by another peripheral\n");
ret = -ENODEV;
goto out_err1;
}
/* warn if behavior settings changing */
if ((reg_br_cur & ~(BR_BA | BR_V)) !=
(reg_br_new & ~(BR_BA | BR_V))) {
dev_warn(priv->dev,
"modifying BR settings: 0x%08x -> 0x%08x",
reg_br_cur, reg_br_new);
}
if ((reg_or_cur & ~OR_GPCM_AM) != (reg_or_new & ~OR_GPCM_AM)) {
dev_warn(priv->dev,
"modifying OR settings: 0x%08x -> 0x%08x",
reg_or_cur, reg_or_new);
}
}
/* configure the bank (force base address and GPCM) */
reg_br_new &= ~(BR_BA | BR_MSEL);
reg_br_new |= fsl_lbc_addr(res.start) | BR_MS_GPCM | BR_V;
out_be32(&priv->lbc->bank[priv->bank].or, reg_or_new);
out_be32(&priv->lbc->bank[priv->bank].br, reg_br_new);
/* map the memory resource */
info->mem[0].internal_addr = ioremap(res.start, resource_size(&res));
if (!info->mem[0].internal_addr) {
dev_err(priv->dev, "failed to map chip region\n");
ret = -ENODEV;
goto out_err1;
}
/* set all UIO data */
if (node->name)
info->mem[0].name = kstrdup(node->name, GFP_KERNEL);
info->mem[0].addr = res.start;
info->mem[0].size = resource_size(&res);
info->mem[0].memtype = UIO_MEM_PHYS;
info->priv = priv;
info->name = uio_name;
info->version = "0.0.1";
if (irq != NO_IRQ) {
if (priv->irq_handler) {
info->irq = irq;
info->irq_flags = IRQF_SHARED;
info->handler = priv->irq_handler;
} else {
irq = NO_IRQ;
dev_warn(priv->dev, "ignoring irq, no handler\n");
}
}
if (priv->init)
priv->init(info);
/* register UIO device */
if (uio_register_device(priv->dev, info) != 0) {
dev_err(priv->dev, "UIO registration failed\n");
ret = -ENODEV;
goto out_err2;
}
/* store private data */
platform_set_drvdata(pdev, info);
/* create sysfs files */
ret = device_create_file(priv->dev, &dev_attr_reg_br);
if (ret)
goto out_err3;
ret = device_create_file(priv->dev, &dev_attr_reg_or);
if (ret)
goto out_err4;
dev_info(priv->dev,
"eLBC/GPCM device (%s) at 0x%llx, bank %d, irq=%d\n",
priv->name, (unsigned long long)res.start, priv->bank,
irq != NO_IRQ ? irq : -1);
return 0;
out_err4:
device_remove_file(priv->dev, &dev_attr_reg_br);
out_err3:
platform_set_drvdata(pdev, NULL);
uio_unregister_device(info);
out_err2:
if (priv->shutdown)
priv->shutdown(info, true);
iounmap(info->mem[0].internal_addr);
out_err1:
kfree(info->mem[0].name);
kfree(info);
out_err0:
kfree(uio_name);
kfree(priv);
return ret;
}
static int uio_fsl_elbc_gpcm_remove(struct platform_device *pdev)
{
struct uio_info *info = platform_get_drvdata(pdev);
struct fsl_elbc_gpcm *priv = info->priv;
device_remove_file(priv->dev, &dev_attr_reg_or);
device_remove_file(priv->dev, &dev_attr_reg_br);
platform_set_drvdata(pdev, NULL);
uio_unregister_device(info);
if (priv->shutdown)
priv->shutdown(info, false);
iounmap(info->mem[0].internal_addr);
kfree(info->mem[0].name);
kfree(info->name);
kfree(info);
kfree(priv);
return 0;
}
static const struct of_device_id uio_fsl_elbc_gpcm_match[] = {
{ .compatible = "fsl,elbc-gpcm-uio", },
{}
};
MODULE_DEVICE_TABLE(of, uio_fsl_elbc_gpcm_match);
static struct platform_driver uio_fsl_elbc_gpcm_driver = {
.driver = {
.name = "fsl,elbc-gpcm-uio",
.owner = THIS_MODULE,
.of_match_table = uio_fsl_elbc_gpcm_match,
},
.probe = uio_fsl_elbc_gpcm_probe,
.remove = uio_fsl_elbc_gpcm_remove,
};
module_platform_driver(uio_fsl_elbc_gpcm_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Ogness <john.ogness@linutronix.de>");
MODULE_DESCRIPTION("Freescale Enhanced Local Bus Controller GPCM driver");