f9a376c3f6
Some cards have a so-called low-latency mode, in which they present a single multichannel stream with no mixing or samplerate conversion. In this mode the card can generate an interrupt per internal processing block (typically 32 or 64 frames) Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2236 lines
65 KiB
C
2236 lines
65 KiB
C
/******************************************************************************
|
|
|
|
AudioScience HPI driver
|
|
Copyright (C) 1997-2014 AudioScience Inc. <support@audioscience.com>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of version 2 of the GNU General Public License as
|
|
published by the Free Software Foundation;
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
Hardware Programming Interface (HPI) for AudioScience
|
|
ASI50xx, AS51xx, ASI6xxx, ASI87xx ASI89xx series adapters.
|
|
These PCI and PCIe bus adapters are based on a
|
|
TMS320C6205 PCI bus mastering DSP,
|
|
and (except ASI50xx) TI TMS320C6xxx floating point DSP
|
|
|
|
Exported function:
|
|
void HPI_6205(struct hpi_message *phm, struct hpi_response *phr)
|
|
|
|
(C) Copyright AudioScience Inc. 1998-2010
|
|
*******************************************************************************/
|
|
#define SOURCEFILE_NAME "hpi6205.c"
|
|
|
|
#include "hpi_internal.h"
|
|
#include "hpimsginit.h"
|
|
#include "hpidebug.h"
|
|
#include "hpi6205.h"
|
|
#include "hpidspcd.h"
|
|
#include "hpicmn.h"
|
|
|
|
/*****************************************************************************/
|
|
/* HPI6205 specific error codes */
|
|
#define HPI6205_ERROR_BASE 1000 /* not actually used anywhere */
|
|
|
|
/* operational/messaging errors */
|
|
#define HPI6205_ERROR_MSG_RESP_IDLE_TIMEOUT 1015
|
|
#define HPI6205_ERROR_MSG_RESP_TIMEOUT 1016
|
|
|
|
/* initialization/bootload errors */
|
|
#define HPI6205_ERROR_6205_NO_IRQ 1002
|
|
#define HPI6205_ERROR_6205_INIT_FAILED 1003
|
|
#define HPI6205_ERROR_6205_REG 1006
|
|
#define HPI6205_ERROR_6205_DSPPAGE 1007
|
|
#define HPI6205_ERROR_C6713_HPIC 1009
|
|
#define HPI6205_ERROR_C6713_HPIA 1010
|
|
#define HPI6205_ERROR_C6713_PLL 1011
|
|
#define HPI6205_ERROR_DSP_INTMEM 1012
|
|
#define HPI6205_ERROR_DSP_EXTMEM 1013
|
|
#define HPI6205_ERROR_DSP_PLD 1014
|
|
#define HPI6205_ERROR_6205_EEPROM 1017
|
|
#define HPI6205_ERROR_DSP_EMIF1 1018
|
|
#define HPI6205_ERROR_DSP_EMIF2 1019
|
|
#define HPI6205_ERROR_DSP_EMIF3 1020
|
|
#define HPI6205_ERROR_DSP_EMIF4 1021
|
|
|
|
/*****************************************************************************/
|
|
/* for C6205 PCI i/f */
|
|
/* Host Status Register (HSR) bitfields */
|
|
#define C6205_HSR_INTSRC 0x01
|
|
#define C6205_HSR_INTAVAL 0x02
|
|
#define C6205_HSR_INTAM 0x04
|
|
#define C6205_HSR_CFGERR 0x08
|
|
#define C6205_HSR_EEREAD 0x10
|
|
/* Host-to-DSP Control Register (HDCR) bitfields */
|
|
#define C6205_HDCR_WARMRESET 0x01
|
|
#define C6205_HDCR_DSPINT 0x02
|
|
#define C6205_HDCR_PCIBOOT 0x04
|
|
/* DSP Page Register (DSPP) bitfields, */
|
|
/* defines 4 Mbyte page that BAR0 points to */
|
|
#define C6205_DSPP_MAP1 0x400
|
|
|
|
/* BAR0 maps to prefetchable 4 Mbyte memory block set by DSPP.
|
|
* BAR1 maps to non-prefetchable 8 Mbyte memory block
|
|
* of DSP memory mapped registers (starting at 0x01800000).
|
|
* 0x01800000 is hardcoded in the PCI i/f, so that only the offset from this
|
|
* needs to be added to the BAR1 base address set in the PCI config reg
|
|
*/
|
|
#define C6205_BAR1_PCI_IO_OFFSET (0x027FFF0L)
|
|
#define C6205_BAR1_HSR (C6205_BAR1_PCI_IO_OFFSET)
|
|
#define C6205_BAR1_HDCR (C6205_BAR1_PCI_IO_OFFSET+4)
|
|
#define C6205_BAR1_DSPP (C6205_BAR1_PCI_IO_OFFSET+8)
|
|
|
|
/* used to control LED (revA) and reset C6713 (revB) */
|
|
#define C6205_BAR0_TIMER1_CTL (0x01980000L)
|
|
|
|
/* For first 6713 in CE1 space, using DA17,16,2 */
|
|
#define HPICL_ADDR 0x01400000L
|
|
#define HPICH_ADDR 0x01400004L
|
|
#define HPIAL_ADDR 0x01410000L
|
|
#define HPIAH_ADDR 0x01410004L
|
|
#define HPIDIL_ADDR 0x01420000L
|
|
#define HPIDIH_ADDR 0x01420004L
|
|
#define HPIDL_ADDR 0x01430000L
|
|
#define HPIDH_ADDR 0x01430004L
|
|
|
|
#define C6713_EMIF_GCTL 0x01800000
|
|
#define C6713_EMIF_CE1 0x01800004
|
|
#define C6713_EMIF_CE0 0x01800008
|
|
#define C6713_EMIF_CE2 0x01800010
|
|
#define C6713_EMIF_CE3 0x01800014
|
|
#define C6713_EMIF_SDRAMCTL 0x01800018
|
|
#define C6713_EMIF_SDRAMTIMING 0x0180001C
|
|
#define C6713_EMIF_SDRAMEXT 0x01800020
|
|
|
|
struct hpi_hw_obj {
|
|
/* PCI registers */
|
|
__iomem u32 *prHSR;
|
|
__iomem u32 *prHDCR;
|
|
__iomem u32 *prDSPP;
|
|
|
|
u32 dsp_page;
|
|
|
|
struct consistent_dma_area h_locked_mem;
|
|
struct bus_master_interface *p_interface_buffer;
|
|
|
|
u16 flag_outstream_just_reset[HPI_MAX_STREAMS];
|
|
/* a non-NULL handle means there is an HPI allocated buffer */
|
|
struct consistent_dma_area instream_host_buffers[HPI_MAX_STREAMS];
|
|
struct consistent_dma_area outstream_host_buffers[HPI_MAX_STREAMS];
|
|
/* non-zero size means a buffer exists, may be external */
|
|
u32 instream_host_buffer_size[HPI_MAX_STREAMS];
|
|
u32 outstream_host_buffer_size[HPI_MAX_STREAMS];
|
|
|
|
struct consistent_dma_area h_control_cache;
|
|
struct hpi_control_cache *p_cache;
|
|
};
|
|
|
|
/*****************************************************************************/
|
|
/* local prototypes */
|
|
|
|
#define check_before_bbm_copy(status, p_bbm_data, l_first_write, l_second_write)
|
|
|
|
static int wait_dsp_ack(struct hpi_hw_obj *phw, int state, int timeout_us);
|
|
|
|
static void send_dsp_command(struct hpi_hw_obj *phw, int cmd);
|
|
|
|
static u16 adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
|
|
u32 *pos_error_code);
|
|
|
|
static u16 message_response_sequence(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
|
|
struct hpi_response *phr);
|
|
|
|
#define HPI6205_TIMEOUT 1000000
|
|
|
|
static void subsys_create_adapter(struct hpi_message *phm,
|
|
struct hpi_response *phr);
|
|
static void adapter_delete(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static u16 create_adapter_obj(struct hpi_adapter_obj *pao,
|
|
u32 *pos_error_code);
|
|
|
|
static void delete_adapter_obj(struct hpi_adapter_obj *pao);
|
|
|
|
static int adapter_irq_query_and_clear(struct hpi_adapter_obj *pao,
|
|
u32 message);
|
|
|
|
static void outstream_host_buffer_allocate(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void outstream_host_buffer_get_info(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void outstream_host_buffer_free(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
static void outstream_write(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void outstream_get_info(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void outstream_start(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void outstream_open(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void outstream_reset(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void instream_host_buffer_allocate(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void instream_host_buffer_get_info(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void instream_host_buffer_free(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void instream_read(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void instream_get_info(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static void instream_start(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr);
|
|
|
|
static u32 boot_loader_read_mem32(struct hpi_adapter_obj *pao, int dsp_index,
|
|
u32 address);
|
|
|
|
static void boot_loader_write_mem32(struct hpi_adapter_obj *pao,
|
|
int dsp_index, u32 address, u32 data);
|
|
|
|
static u16 boot_loader_config_emif(struct hpi_adapter_obj *pao,
|
|
int dsp_index);
|
|
|
|
static u16 boot_loader_test_memory(struct hpi_adapter_obj *pao, int dsp_index,
|
|
u32 address, u32 length);
|
|
|
|
static u16 boot_loader_test_internal_memory(struct hpi_adapter_obj *pao,
|
|
int dsp_index);
|
|
|
|
static u16 boot_loader_test_external_memory(struct hpi_adapter_obj *pao,
|
|
int dsp_index);
|
|
|
|
static u16 boot_loader_test_pld(struct hpi_adapter_obj *pao, int dsp_index);
|
|
|
|
/*****************************************************************************/
|
|
|
|
static void subsys_message(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
switch (phm->function) {
|
|
case HPI_SUBSYS_CREATE_ADAPTER:
|
|
subsys_create_adapter(phm, phr);
|
|
break;
|
|
default:
|
|
phr->error = HPI_ERROR_INVALID_FUNC;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void control_message(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
u16 pending_cache_error = 0;
|
|
|
|
switch (phm->function) {
|
|
case HPI_CONTROL_GET_STATE:
|
|
if (pao->has_control_cache) {
|
|
rmb(); /* make sure we see updates DMAed from DSP */
|
|
if (hpi_check_control_cache(phw->p_cache, phm, phr)) {
|
|
break;
|
|
} else if (phm->u.c.attribute == HPI_METER_PEAK) {
|
|
pending_cache_error =
|
|
HPI_ERROR_CONTROL_CACHING;
|
|
}
|
|
}
|
|
hw_message(pao, phm, phr);
|
|
if (pending_cache_error && !phr->error)
|
|
phr->error = pending_cache_error;
|
|
break;
|
|
case HPI_CONTROL_GET_INFO:
|
|
hw_message(pao, phm, phr);
|
|
break;
|
|
case HPI_CONTROL_SET_STATE:
|
|
hw_message(pao, phm, phr);
|
|
if (pao->has_control_cache)
|
|
hpi_cmn_control_cache_sync_to_msg(phw->p_cache, phm,
|
|
phr);
|
|
break;
|
|
default:
|
|
phr->error = HPI_ERROR_INVALID_FUNC;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void adapter_message(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
switch (phm->function) {
|
|
case HPI_ADAPTER_DELETE:
|
|
adapter_delete(pao, phm, phr);
|
|
break;
|
|
default:
|
|
hw_message(pao, phm, phr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void outstream_message(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
|
|
if (phm->obj_index >= HPI_MAX_STREAMS) {
|
|
phr->error = HPI_ERROR_INVALID_OBJ_INDEX;
|
|
HPI_DEBUG_LOG(WARNING,
|
|
"Message referencing invalid stream %d "
|
|
"on adapter index %d\n", phm->obj_index,
|
|
phm->adapter_index);
|
|
return;
|
|
}
|
|
|
|
switch (phm->function) {
|
|
case HPI_OSTREAM_WRITE:
|
|
outstream_write(pao, phm, phr);
|
|
break;
|
|
case HPI_OSTREAM_GET_INFO:
|
|
outstream_get_info(pao, phm, phr);
|
|
break;
|
|
case HPI_OSTREAM_HOSTBUFFER_ALLOC:
|
|
outstream_host_buffer_allocate(pao, phm, phr);
|
|
break;
|
|
case HPI_OSTREAM_HOSTBUFFER_GET_INFO:
|
|
outstream_host_buffer_get_info(pao, phm, phr);
|
|
break;
|
|
case HPI_OSTREAM_HOSTBUFFER_FREE:
|
|
outstream_host_buffer_free(pao, phm, phr);
|
|
break;
|
|
case HPI_OSTREAM_START:
|
|
outstream_start(pao, phm, phr);
|
|
break;
|
|
case HPI_OSTREAM_OPEN:
|
|
outstream_open(pao, phm, phr);
|
|
break;
|
|
case HPI_OSTREAM_RESET:
|
|
outstream_reset(pao, phm, phr);
|
|
break;
|
|
default:
|
|
hw_message(pao, phm, phr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void instream_message(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
|
|
if (phm->obj_index >= HPI_MAX_STREAMS) {
|
|
phr->error = HPI_ERROR_INVALID_OBJ_INDEX;
|
|
HPI_DEBUG_LOG(WARNING,
|
|
"Message referencing invalid stream %d "
|
|
"on adapter index %d\n", phm->obj_index,
|
|
phm->adapter_index);
|
|
return;
|
|
}
|
|
|
|
switch (phm->function) {
|
|
case HPI_ISTREAM_READ:
|
|
instream_read(pao, phm, phr);
|
|
break;
|
|
case HPI_ISTREAM_GET_INFO:
|
|
instream_get_info(pao, phm, phr);
|
|
break;
|
|
case HPI_ISTREAM_HOSTBUFFER_ALLOC:
|
|
instream_host_buffer_allocate(pao, phm, phr);
|
|
break;
|
|
case HPI_ISTREAM_HOSTBUFFER_GET_INFO:
|
|
instream_host_buffer_get_info(pao, phm, phr);
|
|
break;
|
|
case HPI_ISTREAM_HOSTBUFFER_FREE:
|
|
instream_host_buffer_free(pao, phm, phr);
|
|
break;
|
|
case HPI_ISTREAM_START:
|
|
instream_start(pao, phm, phr);
|
|
break;
|
|
default:
|
|
hw_message(pao, phm, phr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/** Entry point to this HPI backend
|
|
* All calls to the HPI start here
|
|
*/
|
|
static
|
|
void _HPI_6205(struct hpi_adapter_obj *pao, struct hpi_message *phm,
|
|
struct hpi_response *phr)
|
|
{
|
|
if (pao && (pao->dsp_crashed >= 10)
|
|
&& (phm->function != HPI_ADAPTER_DEBUG_READ)) {
|
|
/* allow last resort debug read even after crash */
|
|
hpi_init_response(phr, phm->object, phm->function,
|
|
HPI_ERROR_DSP_HARDWARE);
|
|
HPI_DEBUG_LOG(WARNING, " %d,%d dsp crashed.\n", phm->object,
|
|
phm->function);
|
|
return;
|
|
}
|
|
|
|
/* Init default response */
|
|
if (phm->function != HPI_SUBSYS_CREATE_ADAPTER)
|
|
phr->error = HPI_ERROR_PROCESSING_MESSAGE;
|
|
|
|
HPI_DEBUG_LOG(VERBOSE, "start of switch\n");
|
|
switch (phm->type) {
|
|
case HPI_TYPE_REQUEST:
|
|
switch (phm->object) {
|
|
case HPI_OBJ_SUBSYSTEM:
|
|
subsys_message(pao, phm, phr);
|
|
break;
|
|
|
|
case HPI_OBJ_ADAPTER:
|
|
adapter_message(pao, phm, phr);
|
|
break;
|
|
|
|
case HPI_OBJ_CONTROL:
|
|
control_message(pao, phm, phr);
|
|
break;
|
|
|
|
case HPI_OBJ_OSTREAM:
|
|
outstream_message(pao, phm, phr);
|
|
break;
|
|
|
|
case HPI_OBJ_ISTREAM:
|
|
instream_message(pao, phm, phr);
|
|
break;
|
|
|
|
default:
|
|
hw_message(pao, phm, phr);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
phr->error = HPI_ERROR_INVALID_TYPE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void HPI_6205(struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_adapter_obj *pao = NULL;
|
|
|
|
if (phm->object != HPI_OBJ_SUBSYSTEM) {
|
|
/* normal messages must have valid adapter index */
|
|
pao = hpi_find_adapter(phm->adapter_index);
|
|
} else {
|
|
/* subsys messages don't address an adapter */
|
|
_HPI_6205(NULL, phm, phr);
|
|
return;
|
|
}
|
|
|
|
if (pao)
|
|
_HPI_6205(pao, phm, phr);
|
|
else
|
|
hpi_init_response(phr, phm->object, phm->function,
|
|
HPI_ERROR_BAD_ADAPTER_NUMBER);
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* SUBSYSTEM */
|
|
|
|
/** Create an adapter object and initialise it based on resource information
|
|
* passed in in the message
|
|
* *** NOTE - you cannot use this function AND the FindAdapters function at the
|
|
* same time, the application must use only one of them to get the adapters ***
|
|
*/
|
|
static void subsys_create_adapter(struct hpi_message *phm,
|
|
struct hpi_response *phr)
|
|
{
|
|
/* create temp adapter obj, because we don't know what index yet */
|
|
struct hpi_adapter_obj ao;
|
|
u32 os_error_code;
|
|
u16 err;
|
|
|
|
HPI_DEBUG_LOG(DEBUG, " subsys_create_adapter\n");
|
|
|
|
memset(&ao, 0, sizeof(ao));
|
|
|
|
ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL);
|
|
if (!ao.priv) {
|
|
HPI_DEBUG_LOG(ERROR, "can't get mem for adapter object\n");
|
|
phr->error = HPI_ERROR_MEMORY_ALLOC;
|
|
return;
|
|
}
|
|
|
|
ao.pci = *phm->u.s.resource.r.pci;
|
|
err = create_adapter_obj(&ao, &os_error_code);
|
|
if (err) {
|
|
delete_adapter_obj(&ao);
|
|
if (err >= HPI_ERROR_BACKEND_BASE) {
|
|
phr->error = HPI_ERROR_DSP_BOOTLOAD;
|
|
phr->specific_error = err;
|
|
} else {
|
|
phr->error = err;
|
|
}
|
|
phr->u.s.data = os_error_code;
|
|
return;
|
|
}
|
|
|
|
phr->u.s.adapter_type = ao.type;
|
|
phr->u.s.adapter_index = ao.index;
|
|
phr->error = 0;
|
|
}
|
|
|
|
/** delete an adapter - required by WDM driver */
|
|
static void adapter_delete(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw;
|
|
|
|
if (!pao) {
|
|
phr->error = HPI_ERROR_INVALID_OBJ_INDEX;
|
|
return;
|
|
}
|
|
phw = pao->priv;
|
|
/* reset adapter h/w */
|
|
/* Reset C6713 #1 */
|
|
boot_loader_write_mem32(pao, 0, C6205_BAR0_TIMER1_CTL, 0);
|
|
/* reset C6205 */
|
|
iowrite32(C6205_HDCR_WARMRESET, phw->prHDCR);
|
|
|
|
delete_adapter_obj(pao);
|
|
hpi_delete_adapter(pao);
|
|
phr->error = 0;
|
|
}
|
|
|
|
/** Create adapter object
|
|
allocate buffers, bootload DSPs, initialise control cache
|
|
*/
|
|
static u16 create_adapter_obj(struct hpi_adapter_obj *pao,
|
|
u32 *pos_error_code)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface;
|
|
u32 phys_addr;
|
|
int i;
|
|
u16 err;
|
|
|
|
/* init error reporting */
|
|
pao->dsp_crashed = 0;
|
|
|
|
for (i = 0; i < HPI_MAX_STREAMS; i++)
|
|
phw->flag_outstream_just_reset[i] = 1;
|
|
|
|
/* The C6205 memory area 1 is 8Mbyte window into DSP registers */
|
|
phw->prHSR =
|
|
pao->pci.ap_mem_base[1] +
|
|
C6205_BAR1_HSR / sizeof(*pao->pci.ap_mem_base[1]);
|
|
phw->prHDCR =
|
|
pao->pci.ap_mem_base[1] +
|
|
C6205_BAR1_HDCR / sizeof(*pao->pci.ap_mem_base[1]);
|
|
phw->prDSPP =
|
|
pao->pci.ap_mem_base[1] +
|
|
C6205_BAR1_DSPP / sizeof(*pao->pci.ap_mem_base[1]);
|
|
|
|
pao->has_control_cache = 0;
|
|
|
|
if (hpios_locked_mem_alloc(&phw->h_locked_mem,
|
|
sizeof(struct bus_master_interface),
|
|
pao->pci.pci_dev))
|
|
phw->p_interface_buffer = NULL;
|
|
else if (hpios_locked_mem_get_virt_addr(&phw->h_locked_mem,
|
|
(void *)&phw->p_interface_buffer))
|
|
phw->p_interface_buffer = NULL;
|
|
|
|
HPI_DEBUG_LOG(DEBUG, "interface buffer address %p\n",
|
|
phw->p_interface_buffer);
|
|
|
|
if (phw->p_interface_buffer) {
|
|
memset((void *)phw->p_interface_buffer, 0,
|
|
sizeof(struct bus_master_interface));
|
|
phw->p_interface_buffer->dsp_ack = H620_HIF_UNKNOWN;
|
|
}
|
|
|
|
err = adapter_boot_load_dsp(pao, pos_error_code);
|
|
if (err) {
|
|
HPI_DEBUG_LOG(ERROR, "DSP code load failed\n");
|
|
/* no need to clean up as SubSysCreateAdapter */
|
|
/* calls DeleteAdapter on error. */
|
|
return err;
|
|
}
|
|
HPI_DEBUG_LOG(INFO, "load DSP code OK\n");
|
|
|
|
/* allow boot load even if mem alloc wont work */
|
|
if (!phw->p_interface_buffer)
|
|
return HPI_ERROR_MEMORY_ALLOC;
|
|
|
|
interface = phw->p_interface_buffer;
|
|
|
|
/* make sure the DSP has started ok */
|
|
if (!wait_dsp_ack(phw, H620_HIF_RESET, HPI6205_TIMEOUT * 10)) {
|
|
HPI_DEBUG_LOG(ERROR, "timed out waiting reset state \n");
|
|
return HPI6205_ERROR_6205_INIT_FAILED;
|
|
}
|
|
/* Note that *pao, *phw are zeroed after allocation,
|
|
* so pointers and flags are NULL by default.
|
|
* Allocate bus mastering control cache buffer and tell the DSP about it
|
|
*/
|
|
if (interface->control_cache.number_of_controls) {
|
|
u8 *p_control_cache_virtual;
|
|
|
|
err = hpios_locked_mem_alloc(&phw->h_control_cache,
|
|
interface->control_cache.size_in_bytes,
|
|
pao->pci.pci_dev);
|
|
if (!err)
|
|
err = hpios_locked_mem_get_virt_addr(&phw->
|
|
h_control_cache,
|
|
(void *)&p_control_cache_virtual);
|
|
if (!err) {
|
|
memset(p_control_cache_virtual, 0,
|
|
interface->control_cache.size_in_bytes);
|
|
|
|
phw->p_cache =
|
|
hpi_alloc_control_cache(interface->
|
|
control_cache.number_of_controls,
|
|
interface->control_cache.size_in_bytes,
|
|
p_control_cache_virtual);
|
|
|
|
if (!phw->p_cache)
|
|
err = HPI_ERROR_MEMORY_ALLOC;
|
|
}
|
|
if (!err) {
|
|
err = hpios_locked_mem_get_phys_addr(&phw->
|
|
h_control_cache, &phys_addr);
|
|
interface->control_cache.physical_address32 =
|
|
phys_addr;
|
|
}
|
|
|
|
if (!err)
|
|
pao->has_control_cache = 1;
|
|
else {
|
|
if (hpios_locked_mem_valid(&phw->h_control_cache))
|
|
hpios_locked_mem_free(&phw->h_control_cache);
|
|
pao->has_control_cache = 0;
|
|
}
|
|
}
|
|
send_dsp_command(phw, H620_HIF_IDLE);
|
|
|
|
{
|
|
struct hpi_message hm;
|
|
struct hpi_response hr;
|
|
u32 max_streams;
|
|
|
|
HPI_DEBUG_LOG(VERBOSE, "init ADAPTER_GET_INFO\n");
|
|
memset(&hm, 0, sizeof(hm));
|
|
/* wAdapterIndex == version == 0 */
|
|
hm.type = HPI_TYPE_REQUEST;
|
|
hm.size = sizeof(hm);
|
|
hm.object = HPI_OBJ_ADAPTER;
|
|
hm.function = HPI_ADAPTER_GET_INFO;
|
|
|
|
memset(&hr, 0, sizeof(hr));
|
|
hr.size = sizeof(hr);
|
|
|
|
err = message_response_sequence(pao, &hm, &hr);
|
|
if (err) {
|
|
HPI_DEBUG_LOG(ERROR, "message transport error %d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
if (hr.error)
|
|
return hr.error;
|
|
|
|
pao->type = hr.u.ax.info.adapter_type;
|
|
pao->index = hr.u.ax.info.adapter_index;
|
|
|
|
max_streams =
|
|
hr.u.ax.info.num_outstreams +
|
|
hr.u.ax.info.num_instreams;
|
|
|
|
HPI_DEBUG_LOG(VERBOSE,
|
|
"got adapter info type %x index %d serial %d\n",
|
|
hr.u.ax.info.adapter_type, hr.u.ax.info.adapter_index,
|
|
hr.u.ax.info.serial_number);
|
|
}
|
|
|
|
if (phw->p_cache)
|
|
phw->p_cache->adap_idx = pao->index;
|
|
|
|
HPI_DEBUG_LOG(INFO, "bootload DSP OK\n");
|
|
|
|
pao->irq_query_and_clear = adapter_irq_query_and_clear;
|
|
pao->instream_host_buffer_status =
|
|
phw->p_interface_buffer->instream_host_buffer_status;
|
|
pao->outstream_host_buffer_status =
|
|
phw->p_interface_buffer->outstream_host_buffer_status;
|
|
|
|
return hpi_add_adapter(pao);
|
|
}
|
|
|
|
/** Free memory areas allocated by adapter
|
|
* this routine is called from AdapterDelete,
|
|
* and SubSysCreateAdapter if duplicate index
|
|
*/
|
|
static void delete_adapter_obj(struct hpi_adapter_obj *pao)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
int i;
|
|
|
|
if (hpios_locked_mem_valid(&phw->h_control_cache)) {
|
|
hpios_locked_mem_free(&phw->h_control_cache);
|
|
hpi_free_control_cache(phw->p_cache);
|
|
}
|
|
|
|
if (hpios_locked_mem_valid(&phw->h_locked_mem)) {
|
|
hpios_locked_mem_free(&phw->h_locked_mem);
|
|
phw->p_interface_buffer = NULL;
|
|
}
|
|
|
|
for (i = 0; i < HPI_MAX_STREAMS; i++)
|
|
if (hpios_locked_mem_valid(&phw->instream_host_buffers[i])) {
|
|
hpios_locked_mem_free(&phw->instream_host_buffers[i]);
|
|
/*?phw->InStreamHostBuffers[i] = NULL; */
|
|
phw->instream_host_buffer_size[i] = 0;
|
|
}
|
|
|
|
for (i = 0; i < HPI_MAX_STREAMS; i++)
|
|
if (hpios_locked_mem_valid(&phw->outstream_host_buffers[i])) {
|
|
hpios_locked_mem_free(&phw->outstream_host_buffers
|
|
[i]);
|
|
phw->outstream_host_buffer_size[i] = 0;
|
|
}
|
|
kfree(phw);
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* Adapter functions */
|
|
static int adapter_irq_query_and_clear(struct hpi_adapter_obj *pao,
|
|
u32 message)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
u32 hsr = 0;
|
|
|
|
hsr = ioread32(phw->prHSR);
|
|
if (hsr & C6205_HSR_INTSRC) {
|
|
/* reset the interrupt from the DSP */
|
|
iowrite32(C6205_HSR_INTSRC, phw->prHSR);
|
|
return HPI_IRQ_MIXER;
|
|
}
|
|
|
|
return HPI_IRQ_NONE;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* OutStream Host buffer functions */
|
|
|
|
/** Allocate or attach buffer for busmastering
|
|
*/
|
|
static void outstream_host_buffer_allocate(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
u16 err = 0;
|
|
u32 command = phm->u.d.u.buffer.command;
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
|
|
hpi_init_response(phr, phm->object, phm->function, 0);
|
|
|
|
if (command == HPI_BUFFER_CMD_EXTERNAL
|
|
|| command == HPI_BUFFER_CMD_INTERNAL_ALLOC) {
|
|
/* ALLOC phase, allocate a buffer with power of 2 size,
|
|
get its bus address for PCI bus mastering
|
|
*/
|
|
phm->u.d.u.buffer.buffer_size =
|
|
roundup_pow_of_two(phm->u.d.u.buffer.buffer_size);
|
|
/* return old size and allocated size,
|
|
so caller can detect change */
|
|
phr->u.d.u.stream_info.data_available =
|
|
phw->outstream_host_buffer_size[phm->obj_index];
|
|
phr->u.d.u.stream_info.buffer_size =
|
|
phm->u.d.u.buffer.buffer_size;
|
|
|
|
if (phw->outstream_host_buffer_size[phm->obj_index] ==
|
|
phm->u.d.u.buffer.buffer_size) {
|
|
/* Same size, no action required */
|
|
return;
|
|
}
|
|
|
|
if (hpios_locked_mem_valid(&phw->outstream_host_buffers[phm->
|
|
obj_index]))
|
|
hpios_locked_mem_free(&phw->outstream_host_buffers
|
|
[phm->obj_index]);
|
|
|
|
err = hpios_locked_mem_alloc(&phw->outstream_host_buffers
|
|
[phm->obj_index], phm->u.d.u.buffer.buffer_size,
|
|
pao->pci.pci_dev);
|
|
|
|
if (err) {
|
|
phr->error = HPI_ERROR_INVALID_DATASIZE;
|
|
phw->outstream_host_buffer_size[phm->obj_index] = 0;
|
|
return;
|
|
}
|
|
|
|
err = hpios_locked_mem_get_phys_addr
|
|
(&phw->outstream_host_buffers[phm->obj_index],
|
|
&phm->u.d.u.buffer.pci_address);
|
|
/* get the phys addr into msg for single call alloc caller
|
|
* needs to do this for split alloc (or use the same message)
|
|
* return the phy address for split alloc in the respose too
|
|
*/
|
|
phr->u.d.u.stream_info.auxiliary_data_available =
|
|
phm->u.d.u.buffer.pci_address;
|
|
|
|
if (err) {
|
|
hpios_locked_mem_free(&phw->outstream_host_buffers
|
|
[phm->obj_index]);
|
|
phw->outstream_host_buffer_size[phm->obj_index] = 0;
|
|
phr->error = HPI_ERROR_MEMORY_ALLOC;
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (command == HPI_BUFFER_CMD_EXTERNAL
|
|
|| command == HPI_BUFFER_CMD_INTERNAL_GRANTADAPTER) {
|
|
/* GRANT phase. Set up the BBM status, tell the DSP about
|
|
the buffer so it can start using BBM.
|
|
*/
|
|
struct hpi_hostbuffer_status *status;
|
|
|
|
if (phm->u.d.u.buffer.buffer_size & (phm->u.d.u.buffer.
|
|
buffer_size - 1)) {
|
|
HPI_DEBUG_LOG(ERROR,
|
|
"Buffer size must be 2^N not %d\n",
|
|
phm->u.d.u.buffer.buffer_size);
|
|
phr->error = HPI_ERROR_INVALID_DATASIZE;
|
|
return;
|
|
}
|
|
phw->outstream_host_buffer_size[phm->obj_index] =
|
|
phm->u.d.u.buffer.buffer_size;
|
|
status = &interface->outstream_host_buffer_status[phm->
|
|
obj_index];
|
|
status->samples_processed = 0;
|
|
status->stream_state = HPI_STATE_STOPPED;
|
|
status->dsp_index = 0;
|
|
status->host_index = status->dsp_index;
|
|
status->size_in_bytes = phm->u.d.u.buffer.buffer_size;
|
|
status->auxiliary_data_available = 0;
|
|
|
|
hw_message(pao, phm, phr);
|
|
|
|
if (phr->error
|
|
&& hpios_locked_mem_valid(&phw->
|
|
outstream_host_buffers[phm->obj_index])) {
|
|
hpios_locked_mem_free(&phw->outstream_host_buffers
|
|
[phm->obj_index]);
|
|
phw->outstream_host_buffer_size[phm->obj_index] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void outstream_host_buffer_get_info(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
struct hpi_hostbuffer_status *status;
|
|
u8 *p_bbm_data;
|
|
|
|
if (hpios_locked_mem_valid(&phw->outstream_host_buffers[phm->
|
|
obj_index])) {
|
|
if (hpios_locked_mem_get_virt_addr(&phw->
|
|
outstream_host_buffers[phm->obj_index],
|
|
(void *)&p_bbm_data)) {
|
|
phr->error = HPI_ERROR_INVALID_OPERATION;
|
|
return;
|
|
}
|
|
status = &interface->outstream_host_buffer_status[phm->
|
|
obj_index];
|
|
hpi_init_response(phr, HPI_OBJ_OSTREAM,
|
|
HPI_OSTREAM_HOSTBUFFER_GET_INFO, 0);
|
|
phr->u.d.u.hostbuffer_info.p_buffer = p_bbm_data;
|
|
phr->u.d.u.hostbuffer_info.p_status = status;
|
|
} else {
|
|
hpi_init_response(phr, HPI_OBJ_OSTREAM,
|
|
HPI_OSTREAM_HOSTBUFFER_GET_INFO,
|
|
HPI_ERROR_INVALID_OPERATION);
|
|
}
|
|
}
|
|
|
|
static void outstream_host_buffer_free(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
u32 command = phm->u.d.u.buffer.command;
|
|
|
|
if (phw->outstream_host_buffer_size[phm->obj_index]) {
|
|
if (command == HPI_BUFFER_CMD_EXTERNAL
|
|
|| command == HPI_BUFFER_CMD_INTERNAL_REVOKEADAPTER) {
|
|
phw->outstream_host_buffer_size[phm->obj_index] = 0;
|
|
hw_message(pao, phm, phr);
|
|
/* Tell adapter to stop using the host buffer. */
|
|
}
|
|
if (command == HPI_BUFFER_CMD_EXTERNAL
|
|
|| command == HPI_BUFFER_CMD_INTERNAL_FREE)
|
|
hpios_locked_mem_free(&phw->outstream_host_buffers
|
|
[phm->obj_index]);
|
|
}
|
|
/* Should HPI_ERROR_INVALID_OPERATION be returned
|
|
if no host buffer is allocated? */
|
|
else
|
|
hpi_init_response(phr, HPI_OBJ_OSTREAM,
|
|
HPI_OSTREAM_HOSTBUFFER_FREE, 0);
|
|
|
|
}
|
|
|
|
static u32 outstream_get_space_available(struct hpi_hostbuffer_status *status)
|
|
{
|
|
return status->size_in_bytes - (status->host_index -
|
|
status->dsp_index);
|
|
}
|
|
|
|
static void outstream_write(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
struct hpi_hostbuffer_status *status;
|
|
u32 space_available;
|
|
|
|
if (!phw->outstream_host_buffer_size[phm->obj_index]) {
|
|
/* there is no BBM buffer, write via message */
|
|
hw_message(pao, phm, phr);
|
|
return;
|
|
}
|
|
|
|
hpi_init_response(phr, phm->object, phm->function, 0);
|
|
status = &interface->outstream_host_buffer_status[phm->obj_index];
|
|
|
|
space_available = outstream_get_space_available(status);
|
|
if (space_available < phm->u.d.u.data.data_size) {
|
|
phr->error = HPI_ERROR_INVALID_DATASIZE;
|
|
return;
|
|
}
|
|
|
|
/* HostBuffers is used to indicate host buffer is internally allocated.
|
|
otherwise, assumed external, data written externally */
|
|
if (phm->u.d.u.data.pb_data
|
|
&& hpios_locked_mem_valid(&phw->outstream_host_buffers[phm->
|
|
obj_index])) {
|
|
u8 *p_bbm_data;
|
|
u32 l_first_write;
|
|
u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
|
|
|
|
if (hpios_locked_mem_get_virt_addr(&phw->
|
|
outstream_host_buffers[phm->obj_index],
|
|
(void *)&p_bbm_data)) {
|
|
phr->error = HPI_ERROR_INVALID_OPERATION;
|
|
return;
|
|
}
|
|
|
|
/* either all data,
|
|
or enough to fit from current to end of BBM buffer */
|
|
l_first_write =
|
|
min(phm->u.d.u.data.data_size,
|
|
status->size_in_bytes -
|
|
(status->host_index & (status->size_in_bytes - 1)));
|
|
|
|
memcpy(p_bbm_data +
|
|
(status->host_index & (status->size_in_bytes - 1)),
|
|
p_app_data, l_first_write);
|
|
/* remaining data if any */
|
|
memcpy(p_bbm_data, p_app_data + l_first_write,
|
|
phm->u.d.u.data.data_size - l_first_write);
|
|
}
|
|
|
|
/*
|
|
* This version relies on the DSP code triggering an OStream buffer
|
|
* update immediately following a SET_FORMAT call. The host has
|
|
* already written data into the BBM buffer, but the DSP won't know
|
|
* about it until dwHostIndex is adjusted.
|
|
*/
|
|
if (phw->flag_outstream_just_reset[phm->obj_index]) {
|
|
/* Format can only change after reset. Must tell DSP. */
|
|
u16 function = phm->function;
|
|
phw->flag_outstream_just_reset[phm->obj_index] = 0;
|
|
phm->function = HPI_OSTREAM_SET_FORMAT;
|
|
hw_message(pao, phm, phr); /* send the format to the DSP */
|
|
phm->function = function;
|
|
if (phr->error)
|
|
return;
|
|
}
|
|
|
|
status->host_index += phm->u.d.u.data.data_size;
|
|
}
|
|
|
|
static void outstream_get_info(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
struct hpi_hostbuffer_status *status;
|
|
|
|
if (!phw->outstream_host_buffer_size[phm->obj_index]) {
|
|
hw_message(pao, phm, phr);
|
|
return;
|
|
}
|
|
|
|
hpi_init_response(phr, phm->object, phm->function, 0);
|
|
|
|
status = &interface->outstream_host_buffer_status[phm->obj_index];
|
|
|
|
phr->u.d.u.stream_info.state = (u16)status->stream_state;
|
|
phr->u.d.u.stream_info.samples_transferred =
|
|
status->samples_processed;
|
|
phr->u.d.u.stream_info.buffer_size = status->size_in_bytes;
|
|
phr->u.d.u.stream_info.data_available =
|
|
status->size_in_bytes - outstream_get_space_available(status);
|
|
phr->u.d.u.stream_info.auxiliary_data_available =
|
|
status->auxiliary_data_available;
|
|
}
|
|
|
|
static void outstream_start(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
hw_message(pao, phm, phr);
|
|
}
|
|
|
|
static void outstream_reset(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
phw->flag_outstream_just_reset[phm->obj_index] = 1;
|
|
hw_message(pao, phm, phr);
|
|
}
|
|
|
|
static void outstream_open(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
outstream_reset(pao, phm, phr);
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* InStream Host buffer functions */
|
|
|
|
static void instream_host_buffer_allocate(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
u16 err = 0;
|
|
u32 command = phm->u.d.u.buffer.command;
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
|
|
hpi_init_response(phr, phm->object, phm->function, 0);
|
|
|
|
if (command == HPI_BUFFER_CMD_EXTERNAL
|
|
|| command == HPI_BUFFER_CMD_INTERNAL_ALLOC) {
|
|
|
|
phm->u.d.u.buffer.buffer_size =
|
|
roundup_pow_of_two(phm->u.d.u.buffer.buffer_size);
|
|
phr->u.d.u.stream_info.data_available =
|
|
phw->instream_host_buffer_size[phm->obj_index];
|
|
phr->u.d.u.stream_info.buffer_size =
|
|
phm->u.d.u.buffer.buffer_size;
|
|
|
|
if (phw->instream_host_buffer_size[phm->obj_index] ==
|
|
phm->u.d.u.buffer.buffer_size) {
|
|
/* Same size, no action required */
|
|
return;
|
|
}
|
|
|
|
if (hpios_locked_mem_valid(&phw->instream_host_buffers[phm->
|
|
obj_index]))
|
|
hpios_locked_mem_free(&phw->instream_host_buffers
|
|
[phm->obj_index]);
|
|
|
|
err = hpios_locked_mem_alloc(&phw->instream_host_buffers[phm->
|
|
obj_index], phm->u.d.u.buffer.buffer_size,
|
|
pao->pci.pci_dev);
|
|
|
|
if (err) {
|
|
phr->error = HPI_ERROR_INVALID_DATASIZE;
|
|
phw->instream_host_buffer_size[phm->obj_index] = 0;
|
|
return;
|
|
}
|
|
|
|
err = hpios_locked_mem_get_phys_addr
|
|
(&phw->instream_host_buffers[phm->obj_index],
|
|
&phm->u.d.u.buffer.pci_address);
|
|
/* get the phys addr into msg for single call alloc. Caller
|
|
needs to do this for split alloc so return the phy address */
|
|
phr->u.d.u.stream_info.auxiliary_data_available =
|
|
phm->u.d.u.buffer.pci_address;
|
|
if (err) {
|
|
hpios_locked_mem_free(&phw->instream_host_buffers
|
|
[phm->obj_index]);
|
|
phw->instream_host_buffer_size[phm->obj_index] = 0;
|
|
phr->error = HPI_ERROR_MEMORY_ALLOC;
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (command == HPI_BUFFER_CMD_EXTERNAL
|
|
|| command == HPI_BUFFER_CMD_INTERNAL_GRANTADAPTER) {
|
|
struct hpi_hostbuffer_status *status;
|
|
|
|
if (phm->u.d.u.buffer.buffer_size & (phm->u.d.u.buffer.
|
|
buffer_size - 1)) {
|
|
HPI_DEBUG_LOG(ERROR,
|
|
"Buffer size must be 2^N not %d\n",
|
|
phm->u.d.u.buffer.buffer_size);
|
|
phr->error = HPI_ERROR_INVALID_DATASIZE;
|
|
return;
|
|
}
|
|
|
|
phw->instream_host_buffer_size[phm->obj_index] =
|
|
phm->u.d.u.buffer.buffer_size;
|
|
status = &interface->instream_host_buffer_status[phm->
|
|
obj_index];
|
|
status->samples_processed = 0;
|
|
status->stream_state = HPI_STATE_STOPPED;
|
|
status->dsp_index = 0;
|
|
status->host_index = status->dsp_index;
|
|
status->size_in_bytes = phm->u.d.u.buffer.buffer_size;
|
|
status->auxiliary_data_available = 0;
|
|
|
|
hw_message(pao, phm, phr);
|
|
|
|
if (phr->error
|
|
&& hpios_locked_mem_valid(&phw->
|
|
instream_host_buffers[phm->obj_index])) {
|
|
hpios_locked_mem_free(&phw->instream_host_buffers
|
|
[phm->obj_index]);
|
|
phw->instream_host_buffer_size[phm->obj_index] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void instream_host_buffer_get_info(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
struct hpi_hostbuffer_status *status;
|
|
u8 *p_bbm_data;
|
|
|
|
if (hpios_locked_mem_valid(&phw->instream_host_buffers[phm->
|
|
obj_index])) {
|
|
if (hpios_locked_mem_get_virt_addr(&phw->
|
|
instream_host_buffers[phm->obj_index],
|
|
(void *)&p_bbm_data)) {
|
|
phr->error = HPI_ERROR_INVALID_OPERATION;
|
|
return;
|
|
}
|
|
status = &interface->instream_host_buffer_status[phm->
|
|
obj_index];
|
|
hpi_init_response(phr, HPI_OBJ_ISTREAM,
|
|
HPI_ISTREAM_HOSTBUFFER_GET_INFO, 0);
|
|
phr->u.d.u.hostbuffer_info.p_buffer = p_bbm_data;
|
|
phr->u.d.u.hostbuffer_info.p_status = status;
|
|
} else {
|
|
hpi_init_response(phr, HPI_OBJ_ISTREAM,
|
|
HPI_ISTREAM_HOSTBUFFER_GET_INFO,
|
|
HPI_ERROR_INVALID_OPERATION);
|
|
}
|
|
}
|
|
|
|
static void instream_host_buffer_free(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
u32 command = phm->u.d.u.buffer.command;
|
|
|
|
if (phw->instream_host_buffer_size[phm->obj_index]) {
|
|
if (command == HPI_BUFFER_CMD_EXTERNAL
|
|
|| command == HPI_BUFFER_CMD_INTERNAL_REVOKEADAPTER) {
|
|
phw->instream_host_buffer_size[phm->obj_index] = 0;
|
|
hw_message(pao, phm, phr);
|
|
}
|
|
|
|
if (command == HPI_BUFFER_CMD_EXTERNAL
|
|
|| command == HPI_BUFFER_CMD_INTERNAL_FREE)
|
|
hpios_locked_mem_free(&phw->instream_host_buffers
|
|
[phm->obj_index]);
|
|
|
|
} else {
|
|
/* Should HPI_ERROR_INVALID_OPERATION be returned
|
|
if no host buffer is allocated? */
|
|
hpi_init_response(phr, HPI_OBJ_ISTREAM,
|
|
HPI_ISTREAM_HOSTBUFFER_FREE, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
static void instream_start(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
hw_message(pao, phm, phr);
|
|
}
|
|
|
|
static u32 instream_get_bytes_available(struct hpi_hostbuffer_status *status)
|
|
{
|
|
return status->dsp_index - status->host_index;
|
|
}
|
|
|
|
static void instream_read(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
struct hpi_hostbuffer_status *status;
|
|
u32 data_available;
|
|
u8 *p_bbm_data;
|
|
u32 l_first_read;
|
|
u8 *p_app_data = (u8 *)phm->u.d.u.data.pb_data;
|
|
|
|
if (!phw->instream_host_buffer_size[phm->obj_index]) {
|
|
hw_message(pao, phm, phr);
|
|
return;
|
|
}
|
|
hpi_init_response(phr, phm->object, phm->function, 0);
|
|
|
|
status = &interface->instream_host_buffer_status[phm->obj_index];
|
|
data_available = instream_get_bytes_available(status);
|
|
if (data_available < phm->u.d.u.data.data_size) {
|
|
phr->error = HPI_ERROR_INVALID_DATASIZE;
|
|
return;
|
|
}
|
|
|
|
if (hpios_locked_mem_valid(&phw->instream_host_buffers[phm->
|
|
obj_index])) {
|
|
if (hpios_locked_mem_get_virt_addr(&phw->
|
|
instream_host_buffers[phm->obj_index],
|
|
(void *)&p_bbm_data)) {
|
|
phr->error = HPI_ERROR_INVALID_OPERATION;
|
|
return;
|
|
}
|
|
|
|
/* either all data,
|
|
or enough to fit from current to end of BBM buffer */
|
|
l_first_read =
|
|
min(phm->u.d.u.data.data_size,
|
|
status->size_in_bytes -
|
|
(status->host_index & (status->size_in_bytes - 1)));
|
|
|
|
memcpy(p_app_data,
|
|
p_bbm_data +
|
|
(status->host_index & (status->size_in_bytes - 1)),
|
|
l_first_read);
|
|
/* remaining data if any */
|
|
memcpy(p_app_data + l_first_read, p_bbm_data,
|
|
phm->u.d.u.data.data_size - l_first_read);
|
|
}
|
|
status->host_index += phm->u.d.u.data.data_size;
|
|
}
|
|
|
|
static void instream_get_info(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
struct hpi_hostbuffer_status *status;
|
|
if (!phw->instream_host_buffer_size[phm->obj_index]) {
|
|
hw_message(pao, phm, phr);
|
|
return;
|
|
}
|
|
|
|
status = &interface->instream_host_buffer_status[phm->obj_index];
|
|
|
|
hpi_init_response(phr, phm->object, phm->function, 0);
|
|
|
|
phr->u.d.u.stream_info.state = (u16)status->stream_state;
|
|
phr->u.d.u.stream_info.samples_transferred =
|
|
status->samples_processed;
|
|
phr->u.d.u.stream_info.buffer_size = status->size_in_bytes;
|
|
phr->u.d.u.stream_info.data_available =
|
|
instream_get_bytes_available(status);
|
|
phr->u.d.u.stream_info.auxiliary_data_available =
|
|
status->auxiliary_data_available;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* LOW-LEVEL */
|
|
#define HPI6205_MAX_FILES_TO_LOAD 2
|
|
|
|
static u16 adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
|
|
u32 *pos_error_code)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct dsp_code dsp_code;
|
|
u16 boot_code_id[HPI6205_MAX_FILES_TO_LOAD];
|
|
u32 temp;
|
|
int dsp = 0, i = 0;
|
|
u16 err = 0;
|
|
|
|
boot_code_id[0] = HPI_ADAPTER_ASI(0x6205);
|
|
|
|
boot_code_id[1] = pao->pci.pci_dev->subsystem_device;
|
|
boot_code_id[1] = HPI_ADAPTER_FAMILY_ASI(boot_code_id[1]);
|
|
|
|
/* fix up cases where bootcode id[1] != subsys id */
|
|
switch (boot_code_id[1]) {
|
|
case HPI_ADAPTER_FAMILY_ASI(0x5000):
|
|
boot_code_id[0] = boot_code_id[1];
|
|
boot_code_id[1] = 0;
|
|
break;
|
|
case HPI_ADAPTER_FAMILY_ASI(0x5300):
|
|
case HPI_ADAPTER_FAMILY_ASI(0x5400):
|
|
case HPI_ADAPTER_FAMILY_ASI(0x6300):
|
|
boot_code_id[1] = HPI_ADAPTER_FAMILY_ASI(0x6400);
|
|
break;
|
|
case HPI_ADAPTER_FAMILY_ASI(0x5500):
|
|
case HPI_ADAPTER_FAMILY_ASI(0x5600):
|
|
case HPI_ADAPTER_FAMILY_ASI(0x6500):
|
|
boot_code_id[1] = HPI_ADAPTER_FAMILY_ASI(0x6600);
|
|
break;
|
|
case HPI_ADAPTER_FAMILY_ASI(0x8800):
|
|
boot_code_id[1] = HPI_ADAPTER_FAMILY_ASI(0x8900);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* reset DSP by writing a 1 to the WARMRESET bit */
|
|
temp = C6205_HDCR_WARMRESET;
|
|
iowrite32(temp, phw->prHDCR);
|
|
hpios_delay_micro_seconds(1000);
|
|
|
|
/* check that PCI i/f was configured by EEPROM */
|
|
temp = ioread32(phw->prHSR);
|
|
if ((temp & (C6205_HSR_CFGERR | C6205_HSR_EEREAD)) !=
|
|
C6205_HSR_EEREAD)
|
|
return HPI6205_ERROR_6205_EEPROM;
|
|
temp |= 0x04;
|
|
/* disable PINTA interrupt */
|
|
iowrite32(temp, phw->prHSR);
|
|
|
|
/* check control register reports PCI boot mode */
|
|
temp = ioread32(phw->prHDCR);
|
|
if (!(temp & C6205_HDCR_PCIBOOT))
|
|
return HPI6205_ERROR_6205_REG;
|
|
|
|
/* try writing a few numbers to the DSP page register */
|
|
/* and reading them back. */
|
|
temp = 3;
|
|
iowrite32(temp, phw->prDSPP);
|
|
if ((temp | C6205_DSPP_MAP1) != ioread32(phw->prDSPP))
|
|
return HPI6205_ERROR_6205_DSPPAGE;
|
|
temp = 2;
|
|
iowrite32(temp, phw->prDSPP);
|
|
if ((temp | C6205_DSPP_MAP1) != ioread32(phw->prDSPP))
|
|
return HPI6205_ERROR_6205_DSPPAGE;
|
|
temp = 1;
|
|
iowrite32(temp, phw->prDSPP);
|
|
if ((temp | C6205_DSPP_MAP1) != ioread32(phw->prDSPP))
|
|
return HPI6205_ERROR_6205_DSPPAGE;
|
|
/* reset DSP page to the correct number */
|
|
temp = 0;
|
|
iowrite32(temp, phw->prDSPP);
|
|
if ((temp | C6205_DSPP_MAP1) != ioread32(phw->prDSPP))
|
|
return HPI6205_ERROR_6205_DSPPAGE;
|
|
phw->dsp_page = 0;
|
|
|
|
/* release 6713 from reset before 6205 is bootloaded.
|
|
This ensures that the EMIF is inactive,
|
|
and the 6713 HPI gets the correct bootmode etc
|
|
*/
|
|
if (boot_code_id[1] != 0) {
|
|
/* DSP 1 is a C6713 */
|
|
/* CLKX0 <- '1' release the C6205 bootmode pulldowns */
|
|
boot_loader_write_mem32(pao, 0, 0x018C0024, 0x00002202);
|
|
hpios_delay_micro_seconds(100);
|
|
/* Reset the 6713 #1 - revB */
|
|
boot_loader_write_mem32(pao, 0, C6205_BAR0_TIMER1_CTL, 0);
|
|
/* value of bit 3 is unknown after DSP reset, other bits shoudl be 0 */
|
|
if (0 != (boot_loader_read_mem32(pao, 0,
|
|
(C6205_BAR0_TIMER1_CTL)) & ~8))
|
|
return HPI6205_ERROR_6205_REG;
|
|
hpios_delay_micro_seconds(100);
|
|
|
|
/* Release C6713 from reset - revB */
|
|
boot_loader_write_mem32(pao, 0, C6205_BAR0_TIMER1_CTL, 4);
|
|
if (4 != (boot_loader_read_mem32(pao, 0,
|
|
(C6205_BAR0_TIMER1_CTL)) & ~8))
|
|
return HPI6205_ERROR_6205_REG;
|
|
hpios_delay_micro_seconds(100);
|
|
}
|
|
|
|
for (dsp = 0; dsp < HPI6205_MAX_FILES_TO_LOAD; dsp++) {
|
|
/* is there a DSP to load? */
|
|
if (boot_code_id[dsp] == 0)
|
|
continue;
|
|
|
|
err = boot_loader_config_emif(pao, dsp);
|
|
if (err)
|
|
return err;
|
|
|
|
err = boot_loader_test_internal_memory(pao, dsp);
|
|
if (err)
|
|
return err;
|
|
|
|
err = boot_loader_test_external_memory(pao, dsp);
|
|
if (err)
|
|
return err;
|
|
|
|
err = boot_loader_test_pld(pao, dsp);
|
|
if (err)
|
|
return err;
|
|
|
|
/* write the DSP code down into the DSPs memory */
|
|
err = hpi_dsp_code_open(boot_code_id[dsp], pao->pci.pci_dev,
|
|
&dsp_code, pos_error_code);
|
|
if (err)
|
|
return err;
|
|
|
|
while (1) {
|
|
u32 length;
|
|
u32 address;
|
|
u32 type;
|
|
u32 *pcode;
|
|
|
|
err = hpi_dsp_code_read_word(&dsp_code, &length);
|
|
if (err)
|
|
break;
|
|
if (length == 0xFFFFFFFF)
|
|
break; /* end of code */
|
|
|
|
err = hpi_dsp_code_read_word(&dsp_code, &address);
|
|
if (err)
|
|
break;
|
|
err = hpi_dsp_code_read_word(&dsp_code, &type);
|
|
if (err)
|
|
break;
|
|
err = hpi_dsp_code_read_block(length, &dsp_code,
|
|
&pcode);
|
|
if (err)
|
|
break;
|
|
for (i = 0; i < (int)length; i++) {
|
|
boot_loader_write_mem32(pao, dsp, address,
|
|
*pcode);
|
|
/* dummy read every 4 words */
|
|
/* for 6205 advisory 1.4.4 */
|
|
if (i % 4 == 0)
|
|
boot_loader_read_mem32(pao, dsp,
|
|
address);
|
|
pcode++;
|
|
address += 4;
|
|
}
|
|
|
|
}
|
|
if (err) {
|
|
hpi_dsp_code_close(&dsp_code);
|
|
return err;
|
|
}
|
|
|
|
/* verify code */
|
|
hpi_dsp_code_rewind(&dsp_code);
|
|
while (1) {
|
|
u32 length = 0;
|
|
u32 address = 0;
|
|
u32 type = 0;
|
|
u32 *pcode = NULL;
|
|
u32 data = 0;
|
|
|
|
hpi_dsp_code_read_word(&dsp_code, &length);
|
|
if (length == 0xFFFFFFFF)
|
|
break; /* end of code */
|
|
|
|
hpi_dsp_code_read_word(&dsp_code, &address);
|
|
hpi_dsp_code_read_word(&dsp_code, &type);
|
|
hpi_dsp_code_read_block(length, &dsp_code, &pcode);
|
|
|
|
for (i = 0; i < (int)length; i++) {
|
|
data = boot_loader_read_mem32(pao, dsp,
|
|
address);
|
|
if (data != *pcode) {
|
|
err = 0;
|
|
break;
|
|
}
|
|
pcode++;
|
|
address += 4;
|
|
}
|
|
if (err)
|
|
break;
|
|
}
|
|
hpi_dsp_code_close(&dsp_code);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* After bootloading all DSPs, start DSP0 running
|
|
* The DSP0 code will handle starting and synchronizing with its slaves
|
|
*/
|
|
if (phw->p_interface_buffer) {
|
|
/* we need to tell the card the physical PCI address */
|
|
u32 physicalPC_iaddress;
|
|
struct bus_master_interface *interface =
|
|
phw->p_interface_buffer;
|
|
u32 host_mailbox_address_on_dsp;
|
|
u32 physicalPC_iaddress_verify = 0;
|
|
int time_out = 10;
|
|
/* set ack so we know when DSP is ready to go */
|
|
/* (dwDspAck will be changed to HIF_RESET) */
|
|
interface->dsp_ack = H620_HIF_UNKNOWN;
|
|
wmb(); /* ensure ack is written before dsp writes back */
|
|
|
|
err = hpios_locked_mem_get_phys_addr(&phw->h_locked_mem,
|
|
&physicalPC_iaddress);
|
|
|
|
/* locate the host mailbox on the DSP. */
|
|
host_mailbox_address_on_dsp = 0x80000000;
|
|
while ((physicalPC_iaddress != physicalPC_iaddress_verify)
|
|
&& time_out--) {
|
|
boot_loader_write_mem32(pao, 0,
|
|
host_mailbox_address_on_dsp,
|
|
physicalPC_iaddress);
|
|
physicalPC_iaddress_verify =
|
|
boot_loader_read_mem32(pao, 0,
|
|
host_mailbox_address_on_dsp);
|
|
}
|
|
}
|
|
HPI_DEBUG_LOG(DEBUG, "starting DS_ps running\n");
|
|
/* enable interrupts */
|
|
temp = ioread32(phw->prHSR);
|
|
temp &= ~(u32)C6205_HSR_INTAM;
|
|
iowrite32(temp, phw->prHSR);
|
|
|
|
/* start code running... */
|
|
temp = ioread32(phw->prHDCR);
|
|
temp |= (u32)C6205_HDCR_DSPINT;
|
|
iowrite32(temp, phw->prHDCR);
|
|
|
|
/* give the DSP 10ms to start up */
|
|
hpios_delay_micro_seconds(10000);
|
|
return err;
|
|
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/* Bootloader utility functions */
|
|
|
|
static u32 boot_loader_read_mem32(struct hpi_adapter_obj *pao, int dsp_index,
|
|
u32 address)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
u32 data = 0;
|
|
__iomem u32 *p_data;
|
|
|
|
if (dsp_index == 0) {
|
|
/* DSP 0 is always C6205 */
|
|
if ((address >= 0x01800000) & (address < 0x02000000)) {
|
|
/* BAR1 register access */
|
|
p_data = pao->pci.ap_mem_base[1] +
|
|
(address & 0x007fffff) /
|
|
sizeof(*pao->pci.ap_mem_base[1]);
|
|
/* HPI_DEBUG_LOG(WARNING,
|
|
"BAR1 access %08x\n", dwAddress); */
|
|
} else {
|
|
u32 dw4M_page = address >> 22L;
|
|
if (dw4M_page != phw->dsp_page) {
|
|
phw->dsp_page = dw4M_page;
|
|
/* *INDENT OFF* */
|
|
iowrite32(phw->dsp_page, phw->prDSPP);
|
|
/* *INDENT-ON* */
|
|
}
|
|
address &= 0x3fffff; /* address within 4M page */
|
|
/* BAR0 memory access */
|
|
p_data = pao->pci.ap_mem_base[0] +
|
|
address / sizeof(u32);
|
|
}
|
|
data = ioread32(p_data);
|
|
} else if (dsp_index == 1) {
|
|
/* DSP 1 is a C6713 */
|
|
u32 lsb;
|
|
boot_loader_write_mem32(pao, 0, HPIAL_ADDR, address);
|
|
boot_loader_write_mem32(pao, 0, HPIAH_ADDR, address >> 16);
|
|
lsb = boot_loader_read_mem32(pao, 0, HPIDL_ADDR);
|
|
data = boot_loader_read_mem32(pao, 0, HPIDH_ADDR);
|
|
data = (data << 16) | (lsb & 0xFFFF);
|
|
}
|
|
return data;
|
|
}
|
|
|
|
static void boot_loader_write_mem32(struct hpi_adapter_obj *pao,
|
|
int dsp_index, u32 address, u32 data)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
__iomem u32 *p_data;
|
|
/* u32 dwVerifyData=0; */
|
|
|
|
if (dsp_index == 0) {
|
|
/* DSP 0 is always C6205 */
|
|
if ((address >= 0x01800000) & (address < 0x02000000)) {
|
|
/* BAR1 - DSP register access using */
|
|
/* Non-prefetchable PCI access */
|
|
p_data = pao->pci.ap_mem_base[1] +
|
|
(address & 0x007fffff) /
|
|
sizeof(*pao->pci.ap_mem_base[1]);
|
|
} else {
|
|
/* BAR0 access - all of DSP memory using */
|
|
/* pre-fetchable PCI access */
|
|
u32 dw4M_page = address >> 22L;
|
|
if (dw4M_page != phw->dsp_page) {
|
|
phw->dsp_page = dw4M_page;
|
|
/* *INDENT-OFF* */
|
|
iowrite32(phw->dsp_page, phw->prDSPP);
|
|
/* *INDENT-ON* */
|
|
}
|
|
address &= 0x3fffff; /* address within 4M page */
|
|
p_data = pao->pci.ap_mem_base[0] +
|
|
address / sizeof(u32);
|
|
}
|
|
iowrite32(data, p_data);
|
|
} else if (dsp_index == 1) {
|
|
/* DSP 1 is a C6713 */
|
|
boot_loader_write_mem32(pao, 0, HPIAL_ADDR, address);
|
|
boot_loader_write_mem32(pao, 0, HPIAH_ADDR, address >> 16);
|
|
|
|
/* dummy read every 4 words for 6205 advisory 1.4.4 */
|
|
boot_loader_read_mem32(pao, 0, 0);
|
|
|
|
boot_loader_write_mem32(pao, 0, HPIDL_ADDR, data);
|
|
boot_loader_write_mem32(pao, 0, HPIDH_ADDR, data >> 16);
|
|
|
|
/* dummy read every 4 words for 6205 advisory 1.4.4 */
|
|
boot_loader_read_mem32(pao, 0, 0);
|
|
}
|
|
}
|
|
|
|
static u16 boot_loader_config_emif(struct hpi_adapter_obj *pao, int dsp_index)
|
|
{
|
|
if (dsp_index == 0) {
|
|
u32 setting;
|
|
|
|
/* DSP 0 is always C6205 */
|
|
|
|
/* Set the EMIF */
|
|
/* memory map of C6205 */
|
|
/* 00000000-0000FFFF 16Kx32 internal program */
|
|
/* 00400000-00BFFFFF CE0 2Mx32 SDRAM running @ 100MHz */
|
|
|
|
/* EMIF config */
|
|
/*------------ */
|
|
/* Global EMIF control */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01800000, 0x3779);
|
|
#define WS_OFS 28
|
|
#define WST_OFS 22
|
|
#define WH_OFS 20
|
|
#define RS_OFS 16
|
|
#define RST_OFS 8
|
|
#define MTYPE_OFS 4
|
|
#define RH_OFS 0
|
|
|
|
/* EMIF CE0 setup - 2Mx32 Sync DRAM on ASI5000 cards only */
|
|
setting = 0x00000030;
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01800008, setting);
|
|
if (setting != boot_loader_read_mem32(pao, dsp_index,
|
|
0x01800008))
|
|
return HPI6205_ERROR_DSP_EMIF1;
|
|
|
|
/* EMIF CE1 setup - 32 bit async. This is 6713 #1 HPI, */
|
|
/* which occupies D15..0. 6713 starts at 27MHz, so need */
|
|
/* plenty of wait states. See dsn8701.rtf, and 6713 errata. */
|
|
/* WST should be 71, but 63 is max possible */
|
|
setting =
|
|
(1L << WS_OFS) | (63L << WST_OFS) | (1L << WH_OFS) |
|
|
(1L << RS_OFS) | (63L << RST_OFS) | (1L << RH_OFS) |
|
|
(2L << MTYPE_OFS);
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01800004, setting);
|
|
if (setting != boot_loader_read_mem32(pao, dsp_index,
|
|
0x01800004))
|
|
return HPI6205_ERROR_DSP_EMIF2;
|
|
|
|
/* EMIF CE2 setup - 32 bit async. This is 6713 #2 HPI, */
|
|
/* which occupies D15..0. 6713 starts at 27MHz, so need */
|
|
/* plenty of wait states */
|
|
setting =
|
|
(1L << WS_OFS) | (28L << WST_OFS) | (1L << WH_OFS) |
|
|
(1L << RS_OFS) | (63L << RST_OFS) | (1L << RH_OFS) |
|
|
(2L << MTYPE_OFS);
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01800010, setting);
|
|
if (setting != boot_loader_read_mem32(pao, dsp_index,
|
|
0x01800010))
|
|
return HPI6205_ERROR_DSP_EMIF3;
|
|
|
|
/* EMIF CE3 setup - 32 bit async. */
|
|
/* This is the PLD on the ASI5000 cards only */
|
|
setting =
|
|
(1L << WS_OFS) | (10L << WST_OFS) | (1L << WH_OFS) |
|
|
(1L << RS_OFS) | (10L << RST_OFS) | (1L << RH_OFS) |
|
|
(2L << MTYPE_OFS);
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01800014, setting);
|
|
if (setting != boot_loader_read_mem32(pao, dsp_index,
|
|
0x01800014))
|
|
return HPI6205_ERROR_DSP_EMIF4;
|
|
|
|
/* set EMIF SDRAM control for 2Mx32 SDRAM (512x32x4 bank) */
|
|
/* need to use this else DSP code crashes? */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01800018,
|
|
0x07117000);
|
|
|
|
/* EMIF SDRAM Refresh Timing */
|
|
/* EMIF SDRAM timing (orig = 0x410, emulator = 0x61a) */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x0180001C,
|
|
0x00000410);
|
|
|
|
} else if (dsp_index == 1) {
|
|
/* test access to the C6713s HPI registers */
|
|
u32 write_data = 0, read_data = 0, i = 0;
|
|
|
|
/* Set up HPIC for little endian, by setiing HPIC:HWOB=1 */
|
|
write_data = 1;
|
|
boot_loader_write_mem32(pao, 0, HPICL_ADDR, write_data);
|
|
boot_loader_write_mem32(pao, 0, HPICH_ADDR, write_data);
|
|
/* C67 HPI is on lower 16bits of 32bit EMIF */
|
|
read_data =
|
|
0xFFF7 & boot_loader_read_mem32(pao, 0, HPICL_ADDR);
|
|
if (write_data != read_data) {
|
|
HPI_DEBUG_LOG(ERROR, "HPICL %x %x\n", write_data,
|
|
read_data);
|
|
return HPI6205_ERROR_C6713_HPIC;
|
|
}
|
|
/* HPIA - walking ones test */
|
|
write_data = 1;
|
|
for (i = 0; i < 32; i++) {
|
|
boot_loader_write_mem32(pao, 0, HPIAL_ADDR,
|
|
write_data);
|
|
boot_loader_write_mem32(pao, 0, HPIAH_ADDR,
|
|
(write_data >> 16));
|
|
read_data =
|
|
0xFFFF & boot_loader_read_mem32(pao, 0,
|
|
HPIAL_ADDR);
|
|
read_data =
|
|
read_data | ((0xFFFF &
|
|
boot_loader_read_mem32(pao, 0,
|
|
HPIAH_ADDR))
|
|
<< 16);
|
|
if (read_data != write_data) {
|
|
HPI_DEBUG_LOG(ERROR, "HPIA %x %x\n",
|
|
write_data, read_data);
|
|
return HPI6205_ERROR_C6713_HPIA;
|
|
}
|
|
write_data = write_data << 1;
|
|
}
|
|
|
|
/* setup C67x PLL
|
|
* ** C6713 datasheet says we cannot program PLL from HPI,
|
|
* and indeed if we try to set the PLL multiply from the HPI,
|
|
* the PLL does not seem to lock, so we enable the PLL and
|
|
* use the default multiply of x 7, which for a 27MHz clock
|
|
* gives a DSP speed of 189MHz
|
|
*/
|
|
/* bypass PLL */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01B7C100, 0x0000);
|
|
hpios_delay_micro_seconds(1000);
|
|
/* EMIF = 189/3=63MHz */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01B7C120, 0x8002);
|
|
/* peri = 189/2 */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01B7C11C, 0x8001);
|
|
/* cpu = 189/1 */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01B7C118, 0x8000);
|
|
hpios_delay_micro_seconds(1000);
|
|
/* ** SGT test to take GPO3 high when we start the PLL */
|
|
/* and low when the delay is completed */
|
|
/* FSX0 <- '1' (GPO3) */
|
|
boot_loader_write_mem32(pao, 0, (0x018C0024L), 0x00002A0A);
|
|
/* PLL not bypassed */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x01B7C100, 0x0001);
|
|
hpios_delay_micro_seconds(1000);
|
|
/* FSX0 <- '0' (GPO3) */
|
|
boot_loader_write_mem32(pao, 0, (0x018C0024L), 0x00002A02);
|
|
|
|
/* 6205 EMIF CE1 resetup - 32 bit async. */
|
|
/* Now 6713 #1 is running at 189MHz can reduce waitstates */
|
|
boot_loader_write_mem32(pao, 0, 0x01800004, /* CE1 */
|
|
(1L << WS_OFS) | (8L << WST_OFS) | (1L << WH_OFS) |
|
|
(1L << RS_OFS) | (12L << RST_OFS) | (1L << RH_OFS) |
|
|
(2L << MTYPE_OFS));
|
|
|
|
hpios_delay_micro_seconds(1000);
|
|
|
|
/* check that we can read one of the PLL registers */
|
|
/* PLL should not be bypassed! */
|
|
if ((boot_loader_read_mem32(pao, dsp_index, 0x01B7C100) & 0xF)
|
|
!= 0x0001) {
|
|
return HPI6205_ERROR_C6713_PLL;
|
|
}
|
|
/* setup C67x EMIF (note this is the only use of
|
|
BAR1 via BootLoader_WriteMem32) */
|
|
boot_loader_write_mem32(pao, dsp_index, C6713_EMIF_GCTL,
|
|
0x000034A8);
|
|
|
|
/* EMIF CE0 setup - 2Mx32 Sync DRAM
|
|
31..28 Wr setup
|
|
27..22 Wr strobe
|
|
21..20 Wr hold
|
|
19..16 Rd setup
|
|
15..14 -
|
|
13..8 Rd strobe
|
|
7..4 MTYPE 0011 Sync DRAM 32bits
|
|
3 Wr hold MSB
|
|
2..0 Rd hold
|
|
*/
|
|
boot_loader_write_mem32(pao, dsp_index, C6713_EMIF_CE0,
|
|
0x00000030);
|
|
|
|
/* EMIF SDRAM Extension
|
|
0x00
|
|
31-21 0000b 0000b 000b
|
|
20 WR2RD = 2cycles-1 = 1b
|
|
|
|
19-18 WR2DEAC = 3cycle-1 = 10b
|
|
17 WR2WR = 2cycle-1 = 1b
|
|
16-15 R2WDQM = 4cycle-1 = 11b
|
|
14-12 RD2WR = 6cycles-1 = 101b
|
|
|
|
11-10 RD2DEAC = 4cycle-1 = 11b
|
|
9 RD2RD = 2cycle-1 = 1b
|
|
8-7 THZP = 3cycle-1 = 10b
|
|
6-5 TWR = 2cycle-1 = 01b (tWR = 17ns)
|
|
4 TRRD = 2cycle = 0b (tRRD = 14ns)
|
|
3-1 TRAS = 5cycle-1 = 100b (Tras=42ns)
|
|
1 CAS latency = 3cyc = 1b
|
|
(for Micron 2M32-7 operating at 100MHz)
|
|
*/
|
|
boot_loader_write_mem32(pao, dsp_index, C6713_EMIF_SDRAMEXT,
|
|
0x001BDF29);
|
|
|
|
/* EMIF SDRAM control - set up for a 2Mx32 SDRAM (512x32x4 bank)
|
|
31 - 0b -
|
|
30 SDBSZ 1b 4 bank
|
|
29..28 SDRSZ 00b 11 row address pins
|
|
|
|
27..26 SDCSZ 01b 8 column address pins
|
|
25 RFEN 1b refersh enabled
|
|
24 INIT 1b init SDRAM!
|
|
|
|
23..20 TRCD 0001b (Trcd/Tcyc)-1 = (20/10)-1 = 1
|
|
|
|
19..16 TRP 0001b (Trp/Tcyc)-1 = (20/10)-1 = 1
|
|
|
|
15..12 TRC 0110b (Trc/Tcyc)-1 = (70/10)-1 = 6
|
|
|
|
11..0 - 0000b 0000b 0000b
|
|
*/
|
|
boot_loader_write_mem32(pao, dsp_index, C6713_EMIF_SDRAMCTL,
|
|
0x47116000);
|
|
|
|
/* SDRAM refresh timing
|
|
Need 4,096 refresh cycles every 64ms = 15.625us = 1562cycles of 100MHz = 0x61A
|
|
*/
|
|
boot_loader_write_mem32(pao, dsp_index,
|
|
C6713_EMIF_SDRAMTIMING, 0x00000410);
|
|
|
|
hpios_delay_micro_seconds(1000);
|
|
} else if (dsp_index == 2) {
|
|
/* DSP 2 is a C6713 */
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u16 boot_loader_test_memory(struct hpi_adapter_obj *pao, int dsp_index,
|
|
u32 start_address, u32 length)
|
|
{
|
|
u32 i = 0, j = 0;
|
|
u32 test_addr = 0;
|
|
u32 test_data = 0, data = 0;
|
|
|
|
length = 1000;
|
|
|
|
/* for 1st word, test each bit in the 32bit word, */
|
|
/* dwLength specifies number of 32bit words to test */
|
|
/*for(i=0; i<dwLength; i++) */
|
|
i = 0;
|
|
{
|
|
test_addr = start_address + i * 4;
|
|
test_data = 0x00000001;
|
|
for (j = 0; j < 32; j++) {
|
|
boot_loader_write_mem32(pao, dsp_index, test_addr,
|
|
test_data);
|
|
data = boot_loader_read_mem32(pao, dsp_index,
|
|
test_addr);
|
|
if (data != test_data) {
|
|
HPI_DEBUG_LOG(VERBOSE,
|
|
"Memtest error details "
|
|
"%08x %08x %08x %i\n", test_addr,
|
|
test_data, data, dsp_index);
|
|
return 1; /* error */
|
|
}
|
|
test_data = test_data << 1;
|
|
} /* for(j) */
|
|
} /* for(i) */
|
|
|
|
/* for the next 100 locations test each location, leaving it as zero */
|
|
/* write a zero to the next word in memory before we read */
|
|
/* the previous write to make sure every memory location is unique */
|
|
for (i = 0; i < 100; i++) {
|
|
test_addr = start_address + i * 4;
|
|
test_data = 0xA5A55A5A;
|
|
boot_loader_write_mem32(pao, dsp_index, test_addr, test_data);
|
|
boot_loader_write_mem32(pao, dsp_index, test_addr + 4, 0);
|
|
data = boot_loader_read_mem32(pao, dsp_index, test_addr);
|
|
if (data != test_data) {
|
|
HPI_DEBUG_LOG(VERBOSE,
|
|
"Memtest error details "
|
|
"%08x %08x %08x %i\n", test_addr, test_data,
|
|
data, dsp_index);
|
|
return 1; /* error */
|
|
}
|
|
/* leave location as zero */
|
|
boot_loader_write_mem32(pao, dsp_index, test_addr, 0x0);
|
|
}
|
|
|
|
/* zero out entire memory block */
|
|
for (i = 0; i < length; i++) {
|
|
test_addr = start_address + i * 4;
|
|
boot_loader_write_mem32(pao, dsp_index, test_addr, 0x0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static u16 boot_loader_test_internal_memory(struct hpi_adapter_obj *pao,
|
|
int dsp_index)
|
|
{
|
|
int err = 0;
|
|
if (dsp_index == 0) {
|
|
/* DSP 0 is a C6205 */
|
|
/* 64K prog mem */
|
|
err = boot_loader_test_memory(pao, dsp_index, 0x00000000,
|
|
0x10000);
|
|
if (!err)
|
|
/* 64K data mem */
|
|
err = boot_loader_test_memory(pao, dsp_index,
|
|
0x80000000, 0x10000);
|
|
} else if (dsp_index == 1) {
|
|
/* DSP 1 is a C6713 */
|
|
/* 192K internal mem */
|
|
err = boot_loader_test_memory(pao, dsp_index, 0x00000000,
|
|
0x30000);
|
|
if (!err)
|
|
/* 64K internal mem / L2 cache */
|
|
err = boot_loader_test_memory(pao, dsp_index,
|
|
0x00030000, 0x10000);
|
|
}
|
|
|
|
if (err)
|
|
return HPI6205_ERROR_DSP_INTMEM;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static u16 boot_loader_test_external_memory(struct hpi_adapter_obj *pao,
|
|
int dsp_index)
|
|
{
|
|
u32 dRAM_start_address = 0;
|
|
u32 dRAM_size = 0;
|
|
|
|
if (dsp_index == 0) {
|
|
/* only test for SDRAM if an ASI5000 card */
|
|
if (pao->pci.pci_dev->subsystem_device == 0x5000) {
|
|
/* DSP 0 is always C6205 */
|
|
dRAM_start_address = 0x00400000;
|
|
dRAM_size = 0x200000;
|
|
/*dwDRAMinc=1024; */
|
|
} else
|
|
return 0;
|
|
} else if (dsp_index == 1) {
|
|
/* DSP 1 is a C6713 */
|
|
dRAM_start_address = 0x80000000;
|
|
dRAM_size = 0x200000;
|
|
/*dwDRAMinc=1024; */
|
|
}
|
|
|
|
if (boot_loader_test_memory(pao, dsp_index, dRAM_start_address,
|
|
dRAM_size))
|
|
return HPI6205_ERROR_DSP_EXTMEM;
|
|
return 0;
|
|
}
|
|
|
|
static u16 boot_loader_test_pld(struct hpi_adapter_obj *pao, int dsp_index)
|
|
{
|
|
u32 data = 0;
|
|
if (dsp_index == 0) {
|
|
/* only test for DSP0 PLD on ASI5000 card */
|
|
if (pao->pci.pci_dev->subsystem_device == 0x5000) {
|
|
/* PLD is located at CE3=0x03000000 */
|
|
data = boot_loader_read_mem32(pao, dsp_index,
|
|
0x03000008);
|
|
if ((data & 0xF) != 0x5)
|
|
return HPI6205_ERROR_DSP_PLD;
|
|
data = boot_loader_read_mem32(pao, dsp_index,
|
|
0x0300000C);
|
|
if ((data & 0xF) != 0xA)
|
|
return HPI6205_ERROR_DSP_PLD;
|
|
}
|
|
} else if (dsp_index == 1) {
|
|
/* DSP 1 is a C6713 */
|
|
if (pao->pci.pci_dev->subsystem_device == 0x8700) {
|
|
/* PLD is located at CE1=0x90000000 */
|
|
data = boot_loader_read_mem32(pao, dsp_index,
|
|
0x90000010);
|
|
if ((data & 0xFF) != 0xAA)
|
|
return HPI6205_ERROR_DSP_PLD;
|
|
/* 8713 - LED on */
|
|
boot_loader_write_mem32(pao, dsp_index, 0x90000000,
|
|
0x02);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/** Transfer data to or from DSP
|
|
nOperation = H620_H620_HIF_SEND_DATA or H620_HIF_GET_DATA
|
|
*/
|
|
static short hpi6205_transfer_data(struct hpi_adapter_obj *pao, u8 *p_data,
|
|
u32 data_size, int operation)
|
|
{
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
u32 data_transferred = 0;
|
|
u16 err = 0;
|
|
u32 temp2;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
|
|
if (!p_data)
|
|
return HPI_ERROR_INVALID_DATA_POINTER;
|
|
|
|
data_size &= ~3L; /* round data_size down to nearest 4 bytes */
|
|
|
|
/* make sure state is IDLE */
|
|
if (!wait_dsp_ack(phw, H620_HIF_IDLE, HPI6205_TIMEOUT))
|
|
return HPI_ERROR_DSP_HARDWARE;
|
|
|
|
while (data_transferred < data_size) {
|
|
u32 this_copy = data_size - data_transferred;
|
|
|
|
if (this_copy > HPI6205_SIZEOF_DATA)
|
|
this_copy = HPI6205_SIZEOF_DATA;
|
|
|
|
if (operation == H620_HIF_SEND_DATA)
|
|
memcpy((void *)&interface->u.b_data[0],
|
|
&p_data[data_transferred], this_copy);
|
|
|
|
interface->transfer_size_in_bytes = this_copy;
|
|
|
|
/* DSP must change this back to nOperation */
|
|
interface->dsp_ack = H620_HIF_IDLE;
|
|
send_dsp_command(phw, operation);
|
|
|
|
temp2 = wait_dsp_ack(phw, operation, HPI6205_TIMEOUT);
|
|
HPI_DEBUG_LOG(DEBUG, "spun %d times for data xfer of %d\n",
|
|
HPI6205_TIMEOUT - temp2, this_copy);
|
|
|
|
if (!temp2) {
|
|
/* timed out */
|
|
HPI_DEBUG_LOG(ERROR,
|
|
"Timed out waiting for " "state %d got %d\n",
|
|
operation, interface->dsp_ack);
|
|
|
|
break;
|
|
}
|
|
if (operation == H620_HIF_GET_DATA)
|
|
memcpy(&p_data[data_transferred],
|
|
(void *)&interface->u.b_data[0], this_copy);
|
|
|
|
data_transferred += this_copy;
|
|
}
|
|
if (interface->dsp_ack != operation)
|
|
HPI_DEBUG_LOG(DEBUG, "interface->dsp_ack=%d, expected %d\n",
|
|
interface->dsp_ack, operation);
|
|
/* err=HPI_ERROR_DSP_HARDWARE; */
|
|
|
|
send_dsp_command(phw, H620_HIF_IDLE);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* wait for up to timeout_us microseconds for the DSP
|
|
to signal state by DMA into dwDspAck
|
|
*/
|
|
static int wait_dsp_ack(struct hpi_hw_obj *phw, int state, int timeout_us)
|
|
{
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
int t = timeout_us / 4;
|
|
|
|
rmb(); /* ensure interface->dsp_ack is up to date */
|
|
while ((interface->dsp_ack != state) && --t) {
|
|
hpios_delay_micro_seconds(4);
|
|
rmb(); /* DSP changes dsp_ack by DMA */
|
|
}
|
|
|
|
/*HPI_DEBUG_LOG(VERBOSE, "Spun %d for %d\n", timeout_us/4-t, state); */
|
|
return t * 4;
|
|
}
|
|
|
|
/* set the busmaster interface to cmd, then interrupt the DSP */
|
|
static void send_dsp_command(struct hpi_hw_obj *phw, int cmd)
|
|
{
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
u32 r;
|
|
|
|
interface->host_cmd = cmd;
|
|
wmb(); /* DSP gets state by DMA, make sure it is written to memory */
|
|
/* before we interrupt the DSP */
|
|
r = ioread32(phw->prHDCR);
|
|
r |= (u32)C6205_HDCR_DSPINT;
|
|
iowrite32(r, phw->prHDCR);
|
|
r &= ~(u32)C6205_HDCR_DSPINT;
|
|
iowrite32(r, phw->prHDCR);
|
|
}
|
|
|
|
static unsigned int message_count;
|
|
|
|
static u16 message_response_sequence(struct hpi_adapter_obj *pao,
|
|
struct hpi_message *phm, struct hpi_response *phr)
|
|
{
|
|
u32 time_out, time_out2;
|
|
struct hpi_hw_obj *phw = pao->priv;
|
|
struct bus_master_interface *interface = phw->p_interface_buffer;
|
|
u16 err = 0;
|
|
|
|
message_count++;
|
|
if (phm->size > sizeof(interface->u.message_buffer)) {
|
|
phr->error = HPI_ERROR_MESSAGE_BUFFER_TOO_SMALL;
|
|
phr->specific_error = sizeof(interface->u.message_buffer);
|
|
phr->size = sizeof(struct hpi_response_header);
|
|
HPI_DEBUG_LOG(ERROR,
|
|
"message len %d too big for buffer %zd \n", phm->size,
|
|
sizeof(interface->u.message_buffer));
|
|
return 0;
|
|
}
|
|
|
|
/* Assume buffer of type struct bus_master_interface_62
|
|
is allocated "noncacheable" */
|
|
|
|
if (!wait_dsp_ack(phw, H620_HIF_IDLE, HPI6205_TIMEOUT)) {
|
|
HPI_DEBUG_LOG(DEBUG, "timeout waiting for idle\n");
|
|
return HPI6205_ERROR_MSG_RESP_IDLE_TIMEOUT;
|
|
}
|
|
|
|
memcpy(&interface->u.message_buffer, phm, phm->size);
|
|
/* signal we want a response */
|
|
send_dsp_command(phw, H620_HIF_GET_RESP);
|
|
|
|
time_out2 = wait_dsp_ack(phw, H620_HIF_GET_RESP, HPI6205_TIMEOUT);
|
|
|
|
if (!time_out2) {
|
|
HPI_DEBUG_LOG(ERROR,
|
|
"(%u) Timed out waiting for " "GET_RESP state [%x]\n",
|
|
message_count, interface->dsp_ack);
|
|
} else {
|
|
HPI_DEBUG_LOG(VERBOSE,
|
|
"(%u) transition to GET_RESP after %u\n",
|
|
message_count, HPI6205_TIMEOUT - time_out2);
|
|
}
|
|
/* spin waiting on HIF interrupt flag (end of msg process) */
|
|
time_out = HPI6205_TIMEOUT;
|
|
|
|
/* read the result */
|
|
if (time_out) {
|
|
if (interface->u.response_buffer.response.size <= phr->size)
|
|
memcpy(phr, &interface->u.response_buffer,
|
|
interface->u.response_buffer.response.size);
|
|
else {
|
|
HPI_DEBUG_LOG(ERROR,
|
|
"response len %d too big for buffer %d\n",
|
|
interface->u.response_buffer.response.size,
|
|
phr->size);
|
|
memcpy(phr, &interface->u.response_buffer,
|
|
sizeof(struct hpi_response_header));
|
|
phr->error = HPI_ERROR_RESPONSE_BUFFER_TOO_SMALL;
|
|
phr->specific_error =
|
|
interface->u.response_buffer.response.size;
|
|
phr->size = sizeof(struct hpi_response_header);
|
|
}
|
|
}
|
|
/* set interface back to idle */
|
|
send_dsp_command(phw, H620_HIF_IDLE);
|
|
|
|
if (!time_out || !time_out2) {
|
|
HPI_DEBUG_LOG(DEBUG, "something timed out!\n");
|
|
return HPI6205_ERROR_MSG_RESP_TIMEOUT;
|
|
}
|
|
/* special case for adapter close - */
|
|
/* wait for the DSP to indicate it is idle */
|
|
if (phm->function == HPI_ADAPTER_CLOSE) {
|
|
if (!wait_dsp_ack(phw, H620_HIF_IDLE, HPI6205_TIMEOUT)) {
|
|
HPI_DEBUG_LOG(DEBUG,
|
|
"Timeout waiting for idle "
|
|
"(on adapter_close)\n");
|
|
return HPI6205_ERROR_MSG_RESP_IDLE_TIMEOUT;
|
|
}
|
|
}
|
|
err = hpi_validate_response(phm, phr);
|
|
return err;
|
|
}
|
|
|
|
static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm,
|
|
struct hpi_response *phr)
|
|
{
|
|
|
|
u16 err = 0;
|
|
|
|
hpios_dsplock_lock(pao);
|
|
|
|
err = message_response_sequence(pao, phm, phr);
|
|
|
|
/* maybe an error response */
|
|
if (err) {
|
|
/* something failed in the HPI/DSP interface */
|
|
if (err >= HPI_ERROR_BACKEND_BASE) {
|
|
phr->error = HPI_ERROR_DSP_COMMUNICATION;
|
|
phr->specific_error = err;
|
|
} else {
|
|
phr->error = err;
|
|
}
|
|
|
|
pao->dsp_crashed++;
|
|
|
|
/* just the header of the response is valid */
|
|
phr->size = sizeof(struct hpi_response_header);
|
|
goto err;
|
|
} else
|
|
pao->dsp_crashed = 0;
|
|
|
|
if (phr->error != 0) /* something failed in the DSP */
|
|
goto err;
|
|
|
|
switch (phm->function) {
|
|
case HPI_OSTREAM_WRITE:
|
|
case HPI_ISTREAM_ANC_WRITE:
|
|
err = hpi6205_transfer_data(pao, phm->u.d.u.data.pb_data,
|
|
phm->u.d.u.data.data_size, H620_HIF_SEND_DATA);
|
|
break;
|
|
|
|
case HPI_ISTREAM_READ:
|
|
case HPI_OSTREAM_ANC_READ:
|
|
err = hpi6205_transfer_data(pao, phm->u.d.u.data.pb_data,
|
|
phm->u.d.u.data.data_size, H620_HIF_GET_DATA);
|
|
break;
|
|
|
|
}
|
|
phr->error = err;
|
|
|
|
err:
|
|
hpios_dsplock_unlock(pao);
|
|
|
|
return;
|
|
}
|