linux/arch/x86/kernel/irqinit.c

269 lines
7.1 KiB
C

#include <linux/linkage.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/random.h>
#include <linux/kprobes.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sysdev.h>
#include <linux/bitops.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/timer.h>
#include <asm/hw_irq.h>
#include <asm/pgtable.h>
#include <asm/desc.h>
#include <asm/apic.h>
#include <asm/setup.h>
#include <asm/i8259.h>
#include <asm/traps.h>
/*
* ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
* (these are usually mapped to vectors 0x30-0x3f)
*/
/*
* The IO-APIC gives us many more interrupt sources. Most of these
* are unused but an SMP system is supposed to have enough memory ...
* sometimes (mostly wrt. hw bugs) we get corrupted vectors all
* across the spectrum, so we really want to be prepared to get all
* of these. Plus, more powerful systems might have more than 64
* IO-APIC registers.
*
* (these are usually mapped into the 0x30-0xff vector range)
*/
#ifdef CONFIG_X86_32
/*
* Note that on a 486, we don't want to do a SIGFPE on an irq13
* as the irq is unreliable, and exception 16 works correctly
* (ie as explained in the intel literature). On a 386, you
* can't use exception 16 due to bad IBM design, so we have to
* rely on the less exact irq13.
*
* Careful.. Not only is IRQ13 unreliable, but it is also
* leads to races. IBM designers who came up with it should
* be shot.
*/
static irqreturn_t math_error_irq(int cpl, void *dev_id)
{
outb(0, 0xF0);
if (ignore_fpu_irq || !boot_cpu_data.hard_math)
return IRQ_NONE;
math_error((void __user *)get_irq_regs()->ip);
return IRQ_HANDLED;
}
/*
* New motherboards sometimes make IRQ 13 be a PCI interrupt,
* so allow interrupt sharing.
*/
static struct irqaction fpu_irq = {
.handler = math_error_irq,
.name = "fpu",
};
#endif
/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
static struct irqaction irq2 = {
.handler = no_action,
.name = "cascade",
};
DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
[0 ... NR_VECTORS - 1] = -1,
};
int vector_used_by_percpu_irq(unsigned int vector)
{
int cpu;
for_each_online_cpu(cpu) {
if (per_cpu(vector_irq, cpu)[vector] != -1)
return 1;
}
return 0;
}
void __init init_ISA_irqs(void)
{
int i;
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
init_bsp_APIC();
#endif
legacy_pic->init(0);
/*
* 16 old-style INTA-cycle interrupts:
*/
for (i = 0; i < legacy_pic->nr_legacy_irqs; i++) {
struct irq_desc *desc = irq_to_desc(i);
desc->status = IRQ_DISABLED;
desc->action = NULL;
desc->depth = 1;
set_irq_chip_and_handler_name(i, &i8259A_chip,
handle_level_irq, "XT");
}
}
void __init init_IRQ(void)
{
int i;
/*
* On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15.
* If these IRQ's are handled by legacy interrupt-controllers like PIC,
* then this configuration will likely be static after the boot. If
* these IRQ's are handled by more mordern controllers like IO-APIC,
* then this vector space can be freed and re-used dynamically as the
* irq's migrate etc.
*/
for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
x86_init.irqs.intr_init();
}
/*
* Setup the vector to irq mappings.
*/
void setup_vector_irq(int cpu)
{
#ifndef CONFIG_X86_IO_APIC
int irq;
/*
* On most of the platforms, legacy PIC delivers the interrupts on the
* boot cpu. But there are certain platforms where PIC interrupts are
* delivered to multiple cpu's. If the legacy IRQ is handled by the
* legacy PIC, for the new cpu that is coming online, setup the static
* legacy vector to irq mapping:
*/
for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++)
per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
#endif
__setup_vector_irq(cpu);
}
static void __init smp_intr_init(void)
{
#ifdef CONFIG_SMP
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
/*
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
* IPI, driven by wakeup.
*/
alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
/* IPIs for invalidation */
alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
/* IPI for generic function call */
alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
/* IPI for generic single function call */
alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
call_function_single_interrupt);
/* Low priority IPI to cleanup after moving an irq */
set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
/* IPI used for rebooting/stopping */
alloc_intr_gate(REBOOT_VECTOR, reboot_interrupt);
#endif
#endif /* CONFIG_SMP */
}
static void __init apic_intr_init(void)
{
smp_intr_init();
#ifdef CONFIG_X86_THERMAL_VECTOR
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
#ifdef CONFIG_X86_MCE_THRESHOLD
alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
#endif
#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_LOCAL_APIC)
alloc_intr_gate(MCE_SELF_VECTOR, mce_self_interrupt);
#endif
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
/* self generated IPI for local APIC timer */
alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
/* IPI for X86 platform specific use */
alloc_intr_gate(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi);
/* IPI vectors for APIC spurious and error interrupts */
alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
/* Performance monitoring interrupts: */
# ifdef CONFIG_PERF_EVENTS
alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt);
# endif
#endif
}
void __init native_init_IRQ(void)
{
int i;
/* Execute any quirks before the call gates are initialised: */
x86_init.irqs.pre_vector_init();
apic_intr_init();
/*
* Cover the whole vector space, no vector can escape
* us. (some of these will be overridden and become
* 'special' SMP interrupts)
*/
for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
/* IA32_SYSCALL_VECTOR could be used in trap_init already. */
if (!test_bit(i, used_vectors))
set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
}
if (!acpi_ioapic)
setup_irq(2, &irq2);
#ifdef CONFIG_X86_32
/*
* External FPU? Set up irq13 if so, for
* original braindamaged IBM FERR coupling.
*/
if (boot_cpu_data.hard_math && !cpu_has_fpu)
setup_irq(FPU_IRQ, &fpu_irq);
irq_ctx_init(smp_processor_id());
#endif
}