78 lines
2.8 KiB
Plaintext
78 lines
2.8 KiB
Plaintext
|
|
What: /sys/bus/iio/devices/device[n]/range
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware dependent ADC Full Scale Range used for some ambient
|
|
light sensors in calculating lux.
|
|
|
|
What: /sys/bus/iio/devices/device[n]/range_available
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware dependent supported vales for ADC Full Scale Range.
|
|
|
|
What: /sys/bus/iio/devices/device[n]/adc_resolution
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware dependent ADC resolution of the ambient light sensor
|
|
used in calculating the lux.
|
|
|
|
What: /sys/bus/iio/devices/device[n]/adc_resolution_available
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware dependent list of possible values supported for the
|
|
adc_resolution of the given sensor.
|
|
|
|
What: /sys/bus/iio/devices/device[n]/illuminance0[_input|_raw]
|
|
KernelVersion: 2.6.35
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This should return the calculated lux from the light sensor. If
|
|
it comes back in SI units, it should also include _input else it
|
|
should include _raw to signify it is not in SI units.
|
|
|
|
What: /sys/.../device[n]/proximity_on_chip_ambient_infrared_supression
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
Hardware dependent mode for an ALS device to calculate the value
|
|
in proximity mode. When this is enabled, then the device should
|
|
use a infrared sensor reading to remove infrared noise from the
|
|
proximity reading. If this is not enabled, the driver can still
|
|
do this calculation manually by reading the infrared sensor
|
|
value and doing the negation in sw.
|
|
|
|
What: /sys/bus/iio/devices/device[n]/proximity[_input|_raw]
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This property is supported by proximity sensors and should be
|
|
used to return the value of a reading by the sensor. If this
|
|
value is returned in SI units, it should also include _input
|
|
but if it is not, then it should include _raw.
|
|
|
|
What: /sys/bus/iio/devices/device[n]/intensity_infrared[_input|_raw]
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This property is supported by sensors that have an infrared
|
|
sensing mode. This value should be the output from a reading
|
|
and if expressed in SI units, should include _input. If this
|
|
value is not in SI units, then it should include _raw.
|
|
|
|
What: /sys/bus/iio/devices/device[n]/illuminance0_target
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This property gets/sets the last known external
|
|
lux measurement used in/for calibration.
|
|
|
|
What: /sys/bus/iio/devices/device[n]/illuminance0_integration_time
|
|
KernelVersion: 2.6.37
|
|
Contact: linux-iio@vger.kernel.org
|
|
Description:
|
|
This property gets/sets the sensors ADC analog integration time.
|