444 lines
10 KiB
C
444 lines
10 KiB
C
/**
|
|
* @file op_model_xscale.c
|
|
* XScale Performance Monitor Driver
|
|
*
|
|
* @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
|
|
* @remark Copyright 2000-2004 MontaVista Software Inc
|
|
* @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
|
|
* @remark Copyright 2004 Intel Corporation
|
|
* @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
|
|
* @remark Copyright 2004 OProfile Authors
|
|
*
|
|
* @remark Read the file COPYING
|
|
*
|
|
* @author Zwane Mwaikambo
|
|
*/
|
|
|
|
/* #define DEBUG */
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/oprofile.h>
|
|
#include <linux/interrupt.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "op_counter.h"
|
|
#include "op_arm_model.h"
|
|
|
|
#define PMU_ENABLE 0x001 /* Enable counters */
|
|
#define PMN_RESET 0x002 /* Reset event counters */
|
|
#define CCNT_RESET 0x004 /* Reset clock counter */
|
|
#define PMU_RESET (CCNT_RESET | PMN_RESET)
|
|
#define PMU_CNT64 0x008 /* Make CCNT count every 64th cycle */
|
|
|
|
/* TODO do runtime detection */
|
|
#ifdef CONFIG_ARCH_IOP310
|
|
#define XSCALE_PMU_IRQ IRQ_XS80200_PMU
|
|
#endif
|
|
#ifdef CONFIG_ARCH_IOP321
|
|
#define XSCALE_PMU_IRQ IRQ_IOP321_CORE_PMU
|
|
#endif
|
|
#ifdef CONFIG_ARCH_IOP331
|
|
#define XSCALE_PMU_IRQ IRQ_IOP331_CORE_PMU
|
|
#endif
|
|
#ifdef CONFIG_ARCH_PXA
|
|
#define XSCALE_PMU_IRQ IRQ_PMU
|
|
#endif
|
|
|
|
/*
|
|
* Different types of events that can be counted by the XScale PMU
|
|
* as used by Oprofile userspace. Here primarily for documentation
|
|
* purposes.
|
|
*/
|
|
|
|
#define EVT_ICACHE_MISS 0x00
|
|
#define EVT_ICACHE_NO_DELIVER 0x01
|
|
#define EVT_DATA_STALL 0x02
|
|
#define EVT_ITLB_MISS 0x03
|
|
#define EVT_DTLB_MISS 0x04
|
|
#define EVT_BRANCH 0x05
|
|
#define EVT_BRANCH_MISS 0x06
|
|
#define EVT_INSTRUCTION 0x07
|
|
#define EVT_DCACHE_FULL_STALL 0x08
|
|
#define EVT_DCACHE_FULL_STALL_CONTIG 0x09
|
|
#define EVT_DCACHE_ACCESS 0x0A
|
|
#define EVT_DCACHE_MISS 0x0B
|
|
#define EVT_DCACE_WRITE_BACK 0x0C
|
|
#define EVT_PC_CHANGED 0x0D
|
|
#define EVT_BCU_REQUEST 0x10
|
|
#define EVT_BCU_FULL 0x11
|
|
#define EVT_BCU_DRAIN 0x12
|
|
#define EVT_BCU_ECC_NO_ELOG 0x14
|
|
#define EVT_BCU_1_BIT_ERR 0x15
|
|
#define EVT_RMW 0x16
|
|
/* EVT_CCNT is not hardware defined */
|
|
#define EVT_CCNT 0xFE
|
|
#define EVT_UNUSED 0xFF
|
|
|
|
struct pmu_counter {
|
|
volatile unsigned long ovf;
|
|
unsigned long reset_counter;
|
|
};
|
|
|
|
enum { CCNT, PMN0, PMN1, PMN2, PMN3, MAX_COUNTERS };
|
|
|
|
static struct pmu_counter results[MAX_COUNTERS];
|
|
|
|
/*
|
|
* There are two versions of the PMU in current XScale processors
|
|
* with differing register layouts and number of performance counters.
|
|
* e.g. IOP321 is xsc1 whilst IOP331 is xsc2.
|
|
* We detect which register layout to use in xscale_detect_pmu()
|
|
*/
|
|
enum { PMU_XSC1, PMU_XSC2 };
|
|
|
|
struct pmu_type {
|
|
int id;
|
|
char *name;
|
|
int num_counters;
|
|
unsigned int int_enable;
|
|
unsigned int cnt_ovf[MAX_COUNTERS];
|
|
unsigned int int_mask[MAX_COUNTERS];
|
|
};
|
|
|
|
static struct pmu_type pmu_parms[] = {
|
|
{
|
|
.id = PMU_XSC1,
|
|
.name = "arm/xscale1",
|
|
.num_counters = 3,
|
|
.int_mask = { [PMN0] = 0x10, [PMN1] = 0x20,
|
|
[CCNT] = 0x40 },
|
|
.cnt_ovf = { [CCNT] = 0x400, [PMN0] = 0x100,
|
|
[PMN1] = 0x200},
|
|
},
|
|
{
|
|
.id = PMU_XSC2,
|
|
.name = "arm/xscale2",
|
|
.num_counters = 5,
|
|
.int_mask = { [CCNT] = 0x01, [PMN0] = 0x02,
|
|
[PMN1] = 0x04, [PMN2] = 0x08,
|
|
[PMN3] = 0x10 },
|
|
.cnt_ovf = { [CCNT] = 0x01, [PMN0] = 0x02,
|
|
[PMN1] = 0x04, [PMN2] = 0x08,
|
|
[PMN3] = 0x10 },
|
|
},
|
|
};
|
|
|
|
static struct pmu_type *pmu;
|
|
|
|
static void write_pmnc(u32 val)
|
|
{
|
|
if (pmu->id == PMU_XSC1) {
|
|
/* upper 4bits and 7, 11 are write-as-0 */
|
|
val &= 0xffff77f;
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
|
|
} else {
|
|
/* bits 4-23 are write-as-0, 24-31 are write ignored */
|
|
val &= 0xf;
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
|
|
}
|
|
}
|
|
|
|
static u32 read_pmnc(void)
|
|
{
|
|
u32 val;
|
|
|
|
if (pmu->id == PMU_XSC1)
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
|
|
else {
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
|
|
/* bits 1-2 and 4-23 are read-unpredictable */
|
|
val &= 0xff000009;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static u32 __xsc1_read_counter(int counter)
|
|
{
|
|
u32 val = 0;
|
|
|
|
switch (counter) {
|
|
case CCNT:
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
|
|
break;
|
|
case PMN0:
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
|
|
break;
|
|
case PMN1:
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
|
|
break;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static u32 __xsc2_read_counter(int counter)
|
|
{
|
|
u32 val = 0;
|
|
|
|
switch (counter) {
|
|
case CCNT:
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
|
|
break;
|
|
case PMN0:
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
|
|
break;
|
|
case PMN1:
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
|
|
break;
|
|
case PMN2:
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
|
|
break;
|
|
case PMN3:
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
|
|
break;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static u32 read_counter(int counter)
|
|
{
|
|
u32 val;
|
|
|
|
if (pmu->id == PMU_XSC1)
|
|
val = __xsc1_read_counter(counter);
|
|
else
|
|
val = __xsc2_read_counter(counter);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void __xsc1_write_counter(int counter, u32 val)
|
|
{
|
|
switch (counter) {
|
|
case CCNT:
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
|
|
break;
|
|
case PMN0:
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
|
|
break;
|
|
case PMN1:
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void __xsc2_write_counter(int counter, u32 val)
|
|
{
|
|
switch (counter) {
|
|
case CCNT:
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
|
|
break;
|
|
case PMN0:
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
|
|
break;
|
|
case PMN1:
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
|
|
break;
|
|
case PMN2:
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
|
|
break;
|
|
case PMN3:
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void write_counter(int counter, u32 val)
|
|
{
|
|
if (pmu->id == PMU_XSC1)
|
|
__xsc1_write_counter(counter, val);
|
|
else
|
|
__xsc2_write_counter(counter, val);
|
|
}
|
|
|
|
static int xscale_setup_ctrs(void)
|
|
{
|
|
u32 evtsel, pmnc;
|
|
int i;
|
|
|
|
for (i = CCNT; i < MAX_COUNTERS; i++) {
|
|
if (counter_config[i].enabled)
|
|
continue;
|
|
|
|
counter_config[i].event = EVT_UNUSED;
|
|
}
|
|
|
|
switch (pmu->id) {
|
|
case PMU_XSC1:
|
|
pmnc = (counter_config[PMN1].event << 20) | (counter_config[PMN0].event << 12);
|
|
pr_debug("xscale_setup_ctrs: pmnc: %#08x\n", pmnc);
|
|
write_pmnc(pmnc);
|
|
break;
|
|
|
|
case PMU_XSC2:
|
|
evtsel = counter_config[PMN0].event | (counter_config[PMN1].event << 8) |
|
|
(counter_config[PMN2].event << 16) | (counter_config[PMN3].event << 24);
|
|
|
|
pr_debug("xscale_setup_ctrs: evtsel %#08x\n", evtsel);
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c8, c1, 0" : : "r" (evtsel));
|
|
break;
|
|
}
|
|
|
|
for (i = CCNT; i < MAX_COUNTERS; i++) {
|
|
if (counter_config[i].event == EVT_UNUSED) {
|
|
counter_config[i].event = 0;
|
|
pmu->int_enable &= ~pmu->int_mask[i];
|
|
continue;
|
|
}
|
|
|
|
results[i].reset_counter = counter_config[i].count;
|
|
write_counter(i, -(u32)counter_config[i].count);
|
|
pmu->int_enable |= pmu->int_mask[i];
|
|
pr_debug("xscale_setup_ctrs: counter%d %#08x from %#08lx\n", i,
|
|
read_counter(i), counter_config[i].count);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void inline __xsc1_check_ctrs(void)
|
|
{
|
|
int i;
|
|
u32 pmnc = read_pmnc();
|
|
|
|
/* NOTE: there's an A stepping errata that states if an overflow */
|
|
/* bit already exists and another occurs, the previous */
|
|
/* Overflow bit gets cleared. There's no workaround. */
|
|
/* Fixed in B stepping or later */
|
|
|
|
/* Write the value back to clear the overflow flags. Overflow */
|
|
/* flags remain in pmnc for use below */
|
|
write_pmnc(pmnc & ~PMU_ENABLE);
|
|
|
|
for (i = CCNT; i <= PMN1; i++) {
|
|
if (!(pmu->int_mask[i] & pmu->int_enable))
|
|
continue;
|
|
|
|
if (pmnc & pmu->cnt_ovf[i])
|
|
results[i].ovf++;
|
|
}
|
|
}
|
|
|
|
static void inline __xsc2_check_ctrs(void)
|
|
{
|
|
int i;
|
|
u32 flag = 0, pmnc = read_pmnc();
|
|
|
|
pmnc &= ~PMU_ENABLE;
|
|
write_pmnc(pmnc);
|
|
|
|
/* read overflow flag register */
|
|
__asm__ __volatile__ ("mrc p14, 0, %0, c5, c1, 0" : "=r" (flag));
|
|
|
|
for (i = CCNT; i <= PMN3; i++) {
|
|
if (!(pmu->int_mask[i] & pmu->int_enable))
|
|
continue;
|
|
|
|
if (flag & pmu->cnt_ovf[i])
|
|
results[i].ovf++;
|
|
}
|
|
|
|
/* writeback clears overflow bits */
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c5, c1, 0" : : "r" (flag));
|
|
}
|
|
|
|
static irqreturn_t xscale_pmu_interrupt(int irq, void *arg, struct pt_regs *regs)
|
|
{
|
|
int i;
|
|
u32 pmnc;
|
|
|
|
if (pmu->id == PMU_XSC1)
|
|
__xsc1_check_ctrs();
|
|
else
|
|
__xsc2_check_ctrs();
|
|
|
|
for (i = CCNT; i < MAX_COUNTERS; i++) {
|
|
if (!results[i].ovf)
|
|
continue;
|
|
|
|
write_counter(i, -(u32)results[i].reset_counter);
|
|
oprofile_add_sample(regs, i);
|
|
results[i].ovf--;
|
|
}
|
|
|
|
pmnc = read_pmnc() | PMU_ENABLE;
|
|
write_pmnc(pmnc);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void xscale_pmu_stop(void)
|
|
{
|
|
u32 pmnc = read_pmnc();
|
|
|
|
pmnc &= ~PMU_ENABLE;
|
|
write_pmnc(pmnc);
|
|
|
|
free_irq(XSCALE_PMU_IRQ, results);
|
|
}
|
|
|
|
static int xscale_pmu_start(void)
|
|
{
|
|
int ret;
|
|
u32 pmnc = read_pmnc();
|
|
|
|
ret = request_irq(XSCALE_PMU_IRQ, xscale_pmu_interrupt, SA_INTERRUPT,
|
|
"XScale PMU", (void *)results);
|
|
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
|
|
XSCALE_PMU_IRQ);
|
|
return ret;
|
|
}
|
|
|
|
if (pmu->id == PMU_XSC1)
|
|
pmnc |= pmu->int_enable;
|
|
else {
|
|
__asm__ __volatile__ ("mcr p14, 0, %0, c4, c1, 0" : : "r" (pmu->int_enable));
|
|
pmnc &= ~PMU_CNT64;
|
|
}
|
|
|
|
pmnc |= PMU_ENABLE;
|
|
write_pmnc(pmnc);
|
|
pr_debug("xscale_pmu_start: pmnc: %#08x mask: %08x\n", pmnc, pmu->int_enable);
|
|
return 0;
|
|
}
|
|
|
|
static int xscale_detect_pmu(void)
|
|
{
|
|
int ret = 0;
|
|
u32 id;
|
|
|
|
id = (read_cpuid(CPUID_ID) >> 13) & 0x7;
|
|
|
|
switch (id) {
|
|
case 1:
|
|
pmu = &pmu_parms[PMU_XSC1];
|
|
break;
|
|
case 2:
|
|
pmu = &pmu_parms[PMU_XSC2];
|
|
break;
|
|
default:
|
|
ret = -ENODEV;
|
|
break;
|
|
}
|
|
|
|
if (!ret) {
|
|
op_xscale_spec.name = pmu->name;
|
|
op_xscale_spec.num_counters = pmu->num_counters;
|
|
pr_debug("xscale_detect_pmu: detected %s PMU\n", pmu->name);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
struct op_arm_model_spec op_xscale_spec = {
|
|
.init = xscale_detect_pmu,
|
|
.setup_ctrs = xscale_setup_ctrs,
|
|
.start = xscale_pmu_start,
|
|
.stop = xscale_pmu_stop,
|
|
};
|
|
|