linux/drivers/media/dvb/dvb-usb/anysee.c

572 lines
15 KiB
C

/*
* DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
*
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* TODO:
* - add smart card reader support for Conditional Access (CA)
*
* Card reader in Anysee is nothing more than ISO 7816 card reader.
* There is no hardware CAM in any Anysee device sold.
* In my understanding it should be implemented by making own module
* for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
* module registers serial interface that can be used to communicate
* with any ISO 7816 smart card.
*
* Any help according to implement serial smart card reader support
* is highly welcome!
*/
#include "anysee.h"
#include "tda1002x.h"
#include "mt352.h"
#include "mt352_priv.h"
#include "zl10353.h"
/* debug */
static int dvb_usb_anysee_debug;
module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
static int dvb_usb_anysee_delsys;
module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static DEFINE_MUTEX(anysee_usb_mutex);
static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
u8 *rbuf, u8 rlen)
{
struct anysee_state *state = d->priv;
int act_len, ret;
u8 buf[64];
if (slen > sizeof(buf))
slen = sizeof(buf);
memcpy(&buf[0], sbuf, slen);
buf[60] = state->seq++;
if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
return -EAGAIN;
/* We need receive one message more after dvb_usb_generic_rw due
to weird transaction flow, which is 1 x send + 2 x receive. */
ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
if (!ret) {
/* receive 2nd answer */
ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
&act_len, 2000);
if (ret)
err("%s: recv bulk message failed: %d", __func__, ret);
else {
deb_xfer("<<< ");
debug_dump(buf, act_len, deb_xfer);
}
}
/* read request, copy returned data to return buf */
if (!ret && rbuf && rlen)
memcpy(rbuf, buf, rlen);
mutex_unlock(&anysee_usb_mutex);
return ret;
}
static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
{
u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
int ret;
ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
return ret;
}
static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
{
u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
}
static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
{
u8 buf[] = {CMD_GET_HW_INFO};
return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
}
static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
deb_info("%s: onoff:%02x\n", __func__, onoff);
return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0);
}
static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
{
u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
}
static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
{
u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
deb_info("%s: onoff:%02x\n", __func__, onoff);
return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
}
static int anysee_init(struct dvb_usb_device *d)
{
int ret;
/* LED light */
ret = anysee_led_ctrl(d, 0x01, 0x03);
if (ret)
return ret;
/* enable IR */
ret = anysee_ir_ctrl(d, 1);
if (ret)
return ret;
return 0;
}
/* I2C */
static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int ret = 0, inc, i = 0;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
while (i < num) {
if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
u8 buf[6];
buf[0] = CMD_I2C_READ;
buf[1] = msg[i].addr + 1;
buf[2] = msg[i].buf[0];
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x01;
ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf,
msg[i+1].len);
inc = 2;
} else {
u8 buf[4+msg[i].len];
buf[0] = CMD_I2C_WRITE;
buf[1] = msg[i].addr;
buf[2] = msg[i].len;
buf[3] = 0x01;
memcpy(&buf[4], msg[i].buf, msg[i].len);
ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
inc = 1;
}
if (ret)
break;
i += inc;
}
mutex_unlock(&d->i2c_mutex);
return ret ? ret : i;
}
static u32 anysee_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm anysee_i2c_algo = {
.master_xfer = anysee_master_xfer,
.functionality = anysee_i2c_func,
};
static int anysee_mt352_demod_init(struct dvb_frontend *fe)
{
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 };
static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
mt352_write(fe, reset, sizeof(reset));
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
return 0;
}
/* Callbacks for DVB USB */
static struct tda10023_config anysee_tda10023_config = {
.demod_address = 0x1a,
.invert = 0,
.xtal = 16000000,
.pll_m = 11,
.pll_p = 3,
.pll_n = 1,
.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
.deltaf = 0xfeeb,
};
static struct mt352_config anysee_mt352_config = {
.demod_address = 0x1e,
.demod_init = anysee_mt352_demod_init,
};
static struct zl10353_config anysee_zl10353_config = {
.demod_address = 0x1e,
.parallel_ts = 1,
};
static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct anysee_state *state = adap->dev->priv;
u8 hw_info[3];
u8 io_d; /* IO port D */
/* check which hardware we have
We must do this call two times to get reliable values (hw bug). */
ret = anysee_get_hw_info(adap->dev, hw_info);
if (ret)
return ret;
ret = anysee_get_hw_info(adap->dev, hw_info);
if (ret)
return ret;
/* Meaning of these info bytes are guessed. */
info("firmware version:%d.%d.%d hardware id:%d",
0, hw_info[1], hw_info[2], hw_info[0]);
ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
if (ret)
return ret;
deb_info("%s: IO port D:%02x\n", __func__, io_d);
/* Select demod using trial and error method. */
/* Try to attach demodulator in following order:
model demod hw firmware
1. E30 MT352 02 0.2.1
2. E30 ZL10353 02 0.2.1
3. E30 Combo ZL10353 0f 0.1.2 DVB-T/C combo
4. E30 Plus ZL10353 06 0.1.0
5. E30C Plus TDA10023 0a 0.1.0 rev 0.2
E30C Plus TDA10023 0f 0.1.2 rev 0.4
E30 Combo TDA10023 0f 0.1.2 DVB-T/C combo
*/
/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
&adap->dev->i2c_adap);
if (adap->fe != NULL) {
state->tuner = DVB_PLL_THOMSON_DTT7579;
return 0;
}
/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
&adap->dev->i2c_adap);
if (adap->fe != NULL) {
state->tuner = DVB_PLL_THOMSON_DTT7579;
return 0;
}
/* for E30 Combo Plus DVB-T demodulator */
if (dvb_usb_anysee_delsys) {
ret = anysee_write_reg(adap->dev, 0xb0, 0x01);
if (ret)
return ret;
/* Zarlink ZL10353 DVB-T demod */
adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
&adap->dev->i2c_adap);
if (adap->fe != NULL) {
state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
return 0;
}
}
/* connect demod on IO port D for TDA10023 & ZL10353 */
ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
if (ret)
return ret;
/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
&adap->dev->i2c_adap);
if (adap->fe != NULL) {
state->tuner = DVB_PLL_THOMSON_DTT7579;
return 0;
}
/* IO port E - E30C rev 0.4 board requires this */
ret = anysee_write_reg(adap->dev, 0xb1, 0xa7);
if (ret)
return ret;
/* Philips TDA10023 DVB-C demod */
adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
&adap->dev->i2c_adap, 0x48);
if (adap->fe != NULL) {
state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
return 0;
}
/* return IO port D to init value for safe */
ret = anysee_write_reg(adap->dev, 0xb0, io_d);
if (ret)
return ret;
err("Unkown Anysee version: %02x %02x %02x. "\
"Please report the <linux-dvb@linuxtv.org>.",
hw_info[0], hw_info[1], hw_info[2]);
return -ENODEV;
}
static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
{
struct anysee_state *state = adap->dev->priv;
deb_info("%s: \n", __func__);
switch (state->tuner) {
case DVB_PLL_THOMSON_DTT7579:
/* Thomson dtt7579 (not sure) PLL inside of:
Samsung DNOS404ZH102A NIM
Samsung DNOS404ZH103A NIM */
dvb_attach(dvb_pll_attach, adap->fe, 0x61,
NULL, DVB_PLL_THOMSON_DTT7579);
break;
case DVB_PLL_SAMSUNG_DTOS403IH102A:
/* Unknown PLL inside of Samsung DTOS403IH102A tuner module */
dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
&adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
break;
}
return 0;
}
static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
u8 buf[] = {CMD_GET_IR_CODE};
struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
u8 ircode[2];
int i, ret;
ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2);
if (ret)
return ret;
*event = 0;
*state = REMOTE_NO_KEY_PRESSED;
for (i = 0; i < d->props.rc_key_map_size; i++) {
if (keymap[i].custom == ircode[0] &&
keymap[i].data == ircode[1]) {
*event = keymap[i].event;
*state = REMOTE_KEY_PRESSED;
return 0;
}
}
return 0;
}
static struct dvb_usb_rc_key anysee_rc_keys[] = {
{ 0x01, 0x00, KEY_0 },
{ 0x01, 0x01, KEY_1 },
{ 0x01, 0x02, KEY_2 },
{ 0x01, 0x03, KEY_3 },
{ 0x01, 0x04, KEY_4 },
{ 0x01, 0x05, KEY_5 },
{ 0x01, 0x06, KEY_6 },
{ 0x01, 0x07, KEY_7 },
{ 0x01, 0x08, KEY_8 },
{ 0x01, 0x09, KEY_9 },
{ 0x01, 0x0a, KEY_POWER },
{ 0x01, 0x0b, KEY_DOCUMENTS }, /* * */
{ 0x01, 0x19, KEY_FAVORITES },
{ 0x01, 0x20, KEY_SLEEP },
{ 0x01, 0x21, KEY_MODE }, /* 4:3 / 16:9 select */
{ 0x01, 0x22, KEY_ZOOM },
{ 0x01, 0x47, KEY_TEXT },
{ 0x01, 0x16, KEY_TV }, /* TV / radio select */
{ 0x01, 0x1e, KEY_LANGUAGE }, /* Second Audio Program */
{ 0x01, 0x1a, KEY_SUBTITLE },
{ 0x01, 0x1b, KEY_CAMERA }, /* screenshot */
{ 0x01, 0x42, KEY_MUTE },
{ 0x01, 0x0e, KEY_MENU },
{ 0x01, 0x0f, KEY_EPG },
{ 0x01, 0x17, KEY_INFO },
{ 0x01, 0x10, KEY_EXIT },
{ 0x01, 0x13, KEY_VOLUMEUP },
{ 0x01, 0x12, KEY_VOLUMEDOWN },
{ 0x01, 0x11, KEY_CHANNELUP },
{ 0x01, 0x14, KEY_CHANNELDOWN },
{ 0x01, 0x15, KEY_OK },
{ 0x01, 0x1d, KEY_RED },
{ 0x01, 0x1f, KEY_GREEN },
{ 0x01, 0x1c, KEY_YELLOW },
{ 0x01, 0x44, KEY_BLUE },
{ 0x01, 0x0c, KEY_SHUFFLE }, /* snapshot */
{ 0x01, 0x48, KEY_STOP },
{ 0x01, 0x50, KEY_PLAY },
{ 0x01, 0x51, KEY_PAUSE },
{ 0x01, 0x49, KEY_RECORD },
{ 0x01, 0x18, KEY_PREVIOUS }, /* |<< */
{ 0x01, 0x0d, KEY_NEXT }, /* >>| */
{ 0x01, 0x24, KEY_PROG1 }, /* F1 */
{ 0x01, 0x25, KEY_PROG2 }, /* F2 */
};
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties anysee_properties;
static int anysee_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct dvb_usb_device *d;
struct usb_host_interface *alt;
int ret;
/* There is one interface with two alternate settings.
Alternate setting 0 is for bulk transfer.
Alternate setting 1 is for isochronous transfer.
We use bulk transfer (alternate setting 0). */
if (intf->num_altsetting < 1)
return -ENODEV;
ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
adapter_nr);
if (ret)
return ret;
alt = usb_altnum_to_altsetting(intf, 0);
if (alt == NULL) {
deb_info("%s: no alt found!\n", __func__);
return -ENODEV;
}
ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
alt->desc.bAlternateSetting);
if (ret)
return ret;
if (d)
ret = anysee_init(d);
return ret;
}
static struct usb_device_id anysee_table [] = {
{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
{ USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, anysee_table);
static struct dvb_usb_device_properties anysee_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.size_of_priv = sizeof(struct anysee_state),
.num_adapters = 1,
.adapter = {
{
.streaming_ctrl = anysee_streaming_ctrl,
.frontend_attach = anysee_frontend_attach,
.tuner_attach = anysee_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
.endpoint = 0x82,
.u = {
.bulk = {
.buffersize = 512,
}
}
},
}
},
.rc_key_map = anysee_rc_keys,
.rc_key_map_size = ARRAY_SIZE(anysee_rc_keys),
.rc_query = anysee_rc_query,
.rc_interval = 200, /* windows driver uses 500ms */
.i2c_algo = &anysee_i2c_algo,
.generic_bulk_ctrl_endpoint = 1,
.num_device_descs = 1,
.devices = {
{
.name = "Anysee DVB USB2.0",
.cold_ids = {NULL},
.warm_ids = {&anysee_table[0],
&anysee_table[1], NULL},
},
}
};
static struct usb_driver anysee_driver = {
.name = "dvb_usb_anysee",
.probe = anysee_probe,
.disconnect = dvb_usb_device_exit,
.id_table = anysee_table,
};
/* module stuff */
static int __init anysee_module_init(void)
{
int ret;
ret = usb_register(&anysee_driver);
if (ret)
err("%s: usb_register failed. Error number %d", __func__, ret);
return ret;
}
static void __exit anysee_module_exit(void)
{
/* deregister this driver from the USB subsystem */
usb_deregister(&anysee_driver);
}
module_init(anysee_module_init);
module_exit(anysee_module_exit);
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
MODULE_LICENSE("GPL");