linux/drivers/usb
Alan Stern de06a3b842 UHCI: increase Resume-Detect-off delay
The UHCI controller in my laptop takes longer to turn off the
Resume-Detect bit than the 4 us allowed by uhci-hcd.  Presumably other
computers will have the same problem.

This patch (as752) increases the maximum delay to 10 us, which should be
plenty, and uses polling to avoid penalizing systems which can turn the
bit off more quickly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-27 11:58:54 -07:00
..
atm
class USB: usblp: Use usb_endpoint_* functions. 2006-09-27 11:58:53 -07:00
core USB: Properly unregister reboot notifier in case of failure in ehci hcd 2006-09-27 11:58:54 -07:00
gadget USB gadget: gadgetfs dont try to lock before free 2006-09-27 11:58:54 -07:00
host UHCI: increase Resume-Detect-off delay 2006-09-27 11:58:54 -07:00
image USB: Make file operations structs in drivers/usb const. 2006-09-27 11:58:52 -07:00
input USB: powermate: Use usb_endpoint_* functions. 2006-09-27 11:58:53 -07:00
misc USB: ldusb: Use usb_endpoint_* functions. 2006-09-27 11:58:54 -07:00
mon USB: Make file operations structs in drivers/usb const. 2006-09-27 11:58:52 -07:00
net USB: net1080 inherent pad length 2006-09-27 11:58:54 -07:00
serial USB: usb-serial: Use usb_endpoint_* functions. 2006-09-27 11:58:53 -07:00
storage USB: onetouch - handle errors from input_register_device() 2006-09-27 11:58:52 -07:00
Kconfig USB OHCI controller support for PNX4008 2006-09-27 11:58:48 -07:00
Makefile
README
usb-skeleton.c USB: Make file operations structs in drivers/usb const. 2006-09-27 11:58:52 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.