linux/drivers/pinctrl/mvebu/pinctrl-mvebu.h

212 lines
6.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Marvell MVEBU pinctrl driver
*
* Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*/
#ifndef __PINCTRL_MVEBU_H__
#define __PINCTRL_MVEBU_H__
/**
* struct mvebu_mpp_ctrl_data - private data for the mpp ctrl operations
* @base: base address of pinctrl hardware
* @regmap.map: regmap structure
* @regmap.offset: regmap offset
*/
struct mvebu_mpp_ctrl_data {
union {
void __iomem *base;
struct {
struct regmap *map;
u32 offset;
} regmap;
};
};
/**
* struct mvebu_mpp_ctrl - describe a mpp control
* @name: name of the control group
* @pid: first pin id handled by this control
* @npins: number of pins controlled by this control
* @mpp_get: (optional) special function to get mpp setting
* @mpp_set: (optional) special function to set mpp setting
* @mpp_gpio_req: (optional) special function to request gpio
* @mpp_gpio_dir: (optional) special function to set gpio direction
*
* A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or
* internal function, inside the SoC. Each muxable unit can be switched
* between two or more different settings, e.g. assign mpp pin 13 to
* uart1 or sata.
*
* The mpp_get/_set functions are mandatory and are used to get/set a
* specific mode. The optional mpp_gpio_req/_dir functions can be used
* to allow pin settings with varying gpio pins.
*/
struct mvebu_mpp_ctrl {
const char *name;
u8 pid;
u8 npins;
unsigned *pins;
int (*mpp_get)(struct mvebu_mpp_ctrl_data *data, unsigned pid,
unsigned long *config);
int (*mpp_set)(struct mvebu_mpp_ctrl_data *data, unsigned pid,
unsigned long config);
int (*mpp_gpio_req)(struct mvebu_mpp_ctrl_data *data, unsigned pid);
int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl_data *data, unsigned pid,
bool input);
};
/**
* struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
* @val: ctrl setting value
* @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode
* @subname: (optional) additional ctrl setting name, e.g. rts, cts
* @variant: (optional) variant identifier mask
* @flags: (private) flags to store gpi/gpo/gpio capabilities
*
* A ctrl_setting describes a specific internal mux function that a mpp pin
* can be switched to. The value (val) will be written in the corresponding
* register for common mpp pin configuration registers on MVEBU. SoC specific
* mpp_get/_set function may use val to distinguish between different settings.
*
* The name will be used to switch to this setting in DT description, e.g.
* marvell,function = "uart2". subname is only for debugging purposes.
*
* If name is one of "gpi", "gpo", "gpio" gpio capabilities are
* parsed during initialization and stored in flags.
*
* The variant can be used to combine different revisions of one SoC to a
* common pinctrl driver. It is matched (AND) with variant of soc_info to
* determine if a setting is available on the current SoC revision.
*/
struct mvebu_mpp_ctrl_setting {
u8 val;
const char *name;
const char *subname;
u8 variant;
u8 flags;
#define MVEBU_SETTING_GPO (1 << 0)
#define MVEBU_SETTING_GPI (1 << 1)
};
/**
* struct mvebu_mpp_mode - link ctrl and settings
* @pid: first pin id handled by this mode
* @settings: list of settings available for this mode
*
* A mode connects all available settings with the corresponding mpp_ctrl
* given by pid.
*/
struct mvebu_mpp_mode {
u8 pid;
struct mvebu_mpp_ctrl_setting *settings;
};
/**
* struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu
* @variant: variant mask of soc_info
* @controls: list of available mvebu_mpp_ctrls
* @control_data: optional array, one entry for each control
* @ncontrols: number of available mvebu_mpp_ctrls
* @modes: list of available mvebu_mpp_modes
* @nmodes: number of available mvebu_mpp_modes
* @gpioranges: list of pinctrl_gpio_ranges
* @ngpioranges: number of available pinctrl_gpio_ranges
*
* This struct describes all pinctrl related information for a specific SoC.
* If variant is unequal 0 it will be matched (AND) with variant of each
* setting and allows to distinguish between different revisions of one SoC.
*/
struct mvebu_pinctrl_soc_info {
u8 variant;
const struct mvebu_mpp_ctrl *controls;
struct mvebu_mpp_ctrl_data *control_data;
int ncontrols;
struct mvebu_mpp_mode *modes;
int nmodes;
struct pinctrl_gpio_range *gpioranges;
int ngpioranges;
};
#define MPP_FUNC_CTRL(_idl, _idh, _name, _func) \
{ \
.name = _name, \
.pid = _idl, \
.npins = _idh - _idl + 1, \
.pins = (unsigned[_idh - _idl + 1]) { }, \
.mpp_get = _func ## _get, \
.mpp_set = _func ## _set, \
.mpp_gpio_req = NULL, \
.mpp_gpio_dir = NULL, \
}
#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func) \
{ \
.name = _name, \
.pid = _idl, \
.npins = _idh - _idl + 1, \
.pins = (unsigned[_idh - _idl + 1]) { }, \
.mpp_get = _func ## _get, \
.mpp_set = _func ## _set, \
.mpp_gpio_req = _func ## _gpio_req, \
.mpp_gpio_dir = _func ## _gpio_dir, \
}
#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \
{ \
.val = _val, \
.name = _name, \
.subname = _subname, \
.variant = _mask, \
.flags = 0, \
}
#if defined(CONFIG_DEBUG_FS)
#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \
_MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
#else
#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \
_MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
#endif
#define MPP_FUNCTION(_val, _name, _subname) \
MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1)
#define MPP_MODE(_id, ...) \
{ \
.pid = _id, \
.settings = (struct mvebu_mpp_ctrl_setting[]){ \
__VA_ARGS__, { } }, \
}
#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins) \
{ \
.name = "mvebu-gpio", \
.id = _id, \
.pin_base = _pinbase, \
.base = _gpiobase, \
.npins = _npins, \
}
#define MVEBU_MPPS_PER_REG 8
#define MVEBU_MPP_BITS 4
#define MVEBU_MPP_MASK 0xf
int mvebu_mmio_mpp_ctrl_get(struct mvebu_mpp_ctrl_data *data, unsigned pid,
unsigned long *config);
int mvebu_mmio_mpp_ctrl_set(struct mvebu_mpp_ctrl_data *data, unsigned pid,
unsigned long config);
int mvebu_regmap_mpp_ctrl_get(struct mvebu_mpp_ctrl_data *data, unsigned pid,
unsigned long *config);
int mvebu_regmap_mpp_ctrl_set(struct mvebu_mpp_ctrl_data *data, unsigned pid,
unsigned long config);
int mvebu_pinctrl_probe(struct platform_device *pdev);
int mvebu_pinctrl_simple_mmio_probe(struct platform_device *pdev);
int mvebu_pinctrl_simple_regmap_probe(struct platform_device *pdev,
struct device *syscon_dev, u32 offset);
#endif