1480 lines
39 KiB
C
1480 lines
39 KiB
C
/*
|
|
* omap-mcbsp.c -- OMAP ALSA SoC DAI driver using McBSP port
|
|
*
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
*
|
|
* Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
|
|
* Peter Ujfalusi <peter.ujfalusi@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
|
|
#include "omap-mcbsp-priv.h"
|
|
#include "omap-mcbsp.h"
|
|
#include "sdma-pcm.h"
|
|
|
|
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000)
|
|
|
|
enum {
|
|
OMAP_MCBSP_WORD_8 = 0,
|
|
OMAP_MCBSP_WORD_12,
|
|
OMAP_MCBSP_WORD_16,
|
|
OMAP_MCBSP_WORD_20,
|
|
OMAP_MCBSP_WORD_24,
|
|
OMAP_MCBSP_WORD_32,
|
|
};
|
|
|
|
static void omap_mcbsp_dump_reg(struct omap_mcbsp *mcbsp)
|
|
{
|
|
dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id);
|
|
dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", MCBSP_READ(mcbsp, DRR2));
|
|
dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", MCBSP_READ(mcbsp, DRR1));
|
|
dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", MCBSP_READ(mcbsp, DXR2));
|
|
dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", MCBSP_READ(mcbsp, DXR1));
|
|
dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", MCBSP_READ(mcbsp, SPCR2));
|
|
dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", MCBSP_READ(mcbsp, SPCR1));
|
|
dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", MCBSP_READ(mcbsp, RCR2));
|
|
dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", MCBSP_READ(mcbsp, RCR1));
|
|
dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", MCBSP_READ(mcbsp, XCR2));
|
|
dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", MCBSP_READ(mcbsp, XCR1));
|
|
dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", MCBSP_READ(mcbsp, SRGR2));
|
|
dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", MCBSP_READ(mcbsp, SRGR1));
|
|
dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", MCBSP_READ(mcbsp, PCR0));
|
|
dev_dbg(mcbsp->dev, "***********************\n");
|
|
}
|
|
|
|
static int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id)
|
|
{
|
|
struct clk *fck_src;
|
|
const char *src;
|
|
int r;
|
|
|
|
if (fck_src_id == MCBSP_CLKS_PAD_SRC)
|
|
src = "pad_fck";
|
|
else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
|
|
src = "prcm_fck";
|
|
else
|
|
return -EINVAL;
|
|
|
|
fck_src = clk_get(mcbsp->dev, src);
|
|
if (IS_ERR(fck_src)) {
|
|
dev_err(mcbsp->dev, "CLKS: could not clk_get() %s\n", src);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pm_runtime_put_sync(mcbsp->dev);
|
|
|
|
r = clk_set_parent(mcbsp->fclk, fck_src);
|
|
if (r) {
|
|
dev_err(mcbsp->dev, "CLKS: could not clk_set_parent() to %s\n",
|
|
src);
|
|
clk_put(fck_src);
|
|
return r;
|
|
}
|
|
|
|
pm_runtime_get_sync(mcbsp->dev);
|
|
|
|
clk_put(fck_src);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t omap_mcbsp_irq_handler(int irq, void *data)
|
|
{
|
|
struct omap_mcbsp *mcbsp = data;
|
|
u16 irqst;
|
|
|
|
irqst = MCBSP_READ(mcbsp, IRQST);
|
|
dev_dbg(mcbsp->dev, "IRQ callback : 0x%x\n", irqst);
|
|
|
|
if (irqst & RSYNCERREN)
|
|
dev_err(mcbsp->dev, "RX Frame Sync Error!\n");
|
|
if (irqst & RFSREN)
|
|
dev_dbg(mcbsp->dev, "RX Frame Sync\n");
|
|
if (irqst & REOFEN)
|
|
dev_dbg(mcbsp->dev, "RX End Of Frame\n");
|
|
if (irqst & RRDYEN)
|
|
dev_dbg(mcbsp->dev, "RX Buffer Threshold Reached\n");
|
|
if (irqst & RUNDFLEN)
|
|
dev_err(mcbsp->dev, "RX Buffer Underflow!\n");
|
|
if (irqst & ROVFLEN)
|
|
dev_err(mcbsp->dev, "RX Buffer Overflow!\n");
|
|
|
|
if (irqst & XSYNCERREN)
|
|
dev_err(mcbsp->dev, "TX Frame Sync Error!\n");
|
|
if (irqst & XFSXEN)
|
|
dev_dbg(mcbsp->dev, "TX Frame Sync\n");
|
|
if (irqst & XEOFEN)
|
|
dev_dbg(mcbsp->dev, "TX End Of Frame\n");
|
|
if (irqst & XRDYEN)
|
|
dev_dbg(mcbsp->dev, "TX Buffer threshold Reached\n");
|
|
if (irqst & XUNDFLEN)
|
|
dev_err(mcbsp->dev, "TX Buffer Underflow!\n");
|
|
if (irqst & XOVFLEN)
|
|
dev_err(mcbsp->dev, "TX Buffer Overflow!\n");
|
|
if (irqst & XEMPTYEOFEN)
|
|
dev_dbg(mcbsp->dev, "TX Buffer empty at end of frame\n");
|
|
|
|
MCBSP_WRITE(mcbsp, IRQST, irqst);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *data)
|
|
{
|
|
struct omap_mcbsp *mcbsp = data;
|
|
u16 irqst_spcr2;
|
|
|
|
irqst_spcr2 = MCBSP_READ(mcbsp, SPCR2);
|
|
dev_dbg(mcbsp->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
|
|
|
|
if (irqst_spcr2 & XSYNC_ERR) {
|
|
dev_err(mcbsp->dev, "TX Frame Sync Error! : 0x%x\n",
|
|
irqst_spcr2);
|
|
/* Writing zero to XSYNC_ERR clears the IRQ */
|
|
MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2));
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *data)
|
|
{
|
|
struct omap_mcbsp *mcbsp = data;
|
|
u16 irqst_spcr1;
|
|
|
|
irqst_spcr1 = MCBSP_READ(mcbsp, SPCR1);
|
|
dev_dbg(mcbsp->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
|
|
|
|
if (irqst_spcr1 & RSYNC_ERR) {
|
|
dev_err(mcbsp->dev, "RX Frame Sync Error! : 0x%x\n",
|
|
irqst_spcr1);
|
|
/* Writing zero to RSYNC_ERR clears the IRQ */
|
|
MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1));
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* omap_mcbsp_config simply write a config to the
|
|
* appropriate McBSP.
|
|
* You either call this function or set the McBSP registers
|
|
* by yourself before calling omap_mcbsp_start().
|
|
*/
|
|
static void omap_mcbsp_config(struct omap_mcbsp *mcbsp,
|
|
const struct omap_mcbsp_reg_cfg *config)
|
|
{
|
|
dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n",
|
|
mcbsp->id, mcbsp->phys_base);
|
|
|
|
/* We write the given config */
|
|
MCBSP_WRITE(mcbsp, SPCR2, config->spcr2);
|
|
MCBSP_WRITE(mcbsp, SPCR1, config->spcr1);
|
|
MCBSP_WRITE(mcbsp, RCR2, config->rcr2);
|
|
MCBSP_WRITE(mcbsp, RCR1, config->rcr1);
|
|
MCBSP_WRITE(mcbsp, XCR2, config->xcr2);
|
|
MCBSP_WRITE(mcbsp, XCR1, config->xcr1);
|
|
MCBSP_WRITE(mcbsp, SRGR2, config->srgr2);
|
|
MCBSP_WRITE(mcbsp, SRGR1, config->srgr1);
|
|
MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
|
|
MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
|
|
MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
|
|
if (mcbsp->pdata->has_ccr) {
|
|
MCBSP_WRITE(mcbsp, XCCR, config->xccr);
|
|
MCBSP_WRITE(mcbsp, RCCR, config->rccr);
|
|
}
|
|
/* Enable wakeup behavior */
|
|
if (mcbsp->pdata->has_wakeup)
|
|
MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
|
|
|
|
/* Enable TX/RX sync error interrupts by default */
|
|
if (mcbsp->irq)
|
|
MCBSP_WRITE(mcbsp, IRQEN, RSYNCERREN | XSYNCERREN |
|
|
RUNDFLEN | ROVFLEN | XUNDFLEN | XOVFLEN);
|
|
}
|
|
|
|
/**
|
|
* omap_mcbsp_dma_reg_params - returns the address of mcbsp data register
|
|
* @mcbsp: omap_mcbsp struct for the McBSP instance
|
|
* @stream: Stream direction (playback/capture)
|
|
*
|
|
* Returns the address of mcbsp data transmit register or data receive register
|
|
* to be used by DMA for transferring/receiving data
|
|
*/
|
|
static int omap_mcbsp_dma_reg_params(struct omap_mcbsp *mcbsp,
|
|
unsigned int stream)
|
|
{
|
|
int data_reg;
|
|
|
|
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (mcbsp->pdata->reg_size == 2)
|
|
data_reg = OMAP_MCBSP_REG_DXR1;
|
|
else
|
|
data_reg = OMAP_MCBSP_REG_DXR;
|
|
} else {
|
|
if (mcbsp->pdata->reg_size == 2)
|
|
data_reg = OMAP_MCBSP_REG_DRR1;
|
|
else
|
|
data_reg = OMAP_MCBSP_REG_DRR;
|
|
}
|
|
|
|
return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
|
|
}
|
|
|
|
/*
|
|
* omap_mcbsp_set_rx_threshold configures the transmit threshold in words.
|
|
* The threshold parameter is 1 based, and it is converted (threshold - 1)
|
|
* for the THRSH2 register.
|
|
*/
|
|
static void omap_mcbsp_set_tx_threshold(struct omap_mcbsp *mcbsp, u16 threshold)
|
|
{
|
|
if (threshold && threshold <= mcbsp->max_tx_thres)
|
|
MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
|
|
}
|
|
|
|
/*
|
|
* omap_mcbsp_set_rx_threshold configures the receive threshold in words.
|
|
* The threshold parameter is 1 based, and it is converted (threshold - 1)
|
|
* for the THRSH1 register.
|
|
*/
|
|
static void omap_mcbsp_set_rx_threshold(struct omap_mcbsp *mcbsp, u16 threshold)
|
|
{
|
|
if (threshold && threshold <= mcbsp->max_rx_thres)
|
|
MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
|
|
}
|
|
|
|
/*
|
|
* omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO
|
|
*/
|
|
static u16 omap_mcbsp_get_tx_delay(struct omap_mcbsp *mcbsp)
|
|
{
|
|
u16 buffstat;
|
|
|
|
/* Returns the number of free locations in the buffer */
|
|
buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
|
|
|
|
/* Number of slots are different in McBSP ports */
|
|
return mcbsp->pdata->buffer_size - buffstat;
|
|
}
|
|
|
|
/*
|
|
* omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO
|
|
* to reach the threshold value (when the DMA will be triggered to read it)
|
|
*/
|
|
static u16 omap_mcbsp_get_rx_delay(struct omap_mcbsp *mcbsp)
|
|
{
|
|
u16 buffstat, threshold;
|
|
|
|
/* Returns the number of used locations in the buffer */
|
|
buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
|
|
/* RX threshold */
|
|
threshold = MCBSP_READ(mcbsp, THRSH1);
|
|
|
|
/* Return the number of location till we reach the threshold limit */
|
|
if (threshold <= buffstat)
|
|
return 0;
|
|
else
|
|
return threshold - buffstat;
|
|
}
|
|
|
|
static int omap_mcbsp_request(struct omap_mcbsp *mcbsp)
|
|
{
|
|
void *reg_cache;
|
|
int err;
|
|
|
|
reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL);
|
|
if (!reg_cache)
|
|
return -ENOMEM;
|
|
|
|
spin_lock(&mcbsp->lock);
|
|
if (!mcbsp->free) {
|
|
dev_err(mcbsp->dev, "McBSP%d is currently in use\n", mcbsp->id);
|
|
err = -EBUSY;
|
|
goto err_kfree;
|
|
}
|
|
|
|
mcbsp->free = false;
|
|
mcbsp->reg_cache = reg_cache;
|
|
spin_unlock(&mcbsp->lock);
|
|
|
|
if(mcbsp->pdata->ops && mcbsp->pdata->ops->request)
|
|
mcbsp->pdata->ops->request(mcbsp->id - 1);
|
|
|
|
/*
|
|
* Make sure that transmitter, receiver and sample-rate generator are
|
|
* not running before activating IRQs.
|
|
*/
|
|
MCBSP_WRITE(mcbsp, SPCR1, 0);
|
|
MCBSP_WRITE(mcbsp, SPCR2, 0);
|
|
|
|
if (mcbsp->irq) {
|
|
err = request_irq(mcbsp->irq, omap_mcbsp_irq_handler, 0,
|
|
"McBSP", (void *)mcbsp);
|
|
if (err != 0) {
|
|
dev_err(mcbsp->dev, "Unable to request IRQ\n");
|
|
goto err_clk_disable;
|
|
}
|
|
} else {
|
|
err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, 0,
|
|
"McBSP TX", (void *)mcbsp);
|
|
if (err != 0) {
|
|
dev_err(mcbsp->dev, "Unable to request TX IRQ\n");
|
|
goto err_clk_disable;
|
|
}
|
|
|
|
err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, 0,
|
|
"McBSP RX", (void *)mcbsp);
|
|
if (err != 0) {
|
|
dev_err(mcbsp->dev, "Unable to request RX IRQ\n");
|
|
goto err_free_irq;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err_free_irq:
|
|
free_irq(mcbsp->tx_irq, (void *)mcbsp);
|
|
err_clk_disable:
|
|
if(mcbsp->pdata->ops && mcbsp->pdata->ops->free)
|
|
mcbsp->pdata->ops->free(mcbsp->id - 1);
|
|
|
|
/* Disable wakeup behavior */
|
|
if (mcbsp->pdata->has_wakeup)
|
|
MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
|
|
|
|
spin_lock(&mcbsp->lock);
|
|
mcbsp->free = true;
|
|
mcbsp->reg_cache = NULL;
|
|
err_kfree:
|
|
spin_unlock(&mcbsp->lock);
|
|
kfree(reg_cache);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void omap_mcbsp_free(struct omap_mcbsp *mcbsp)
|
|
{
|
|
void *reg_cache;
|
|
|
|
if(mcbsp->pdata->ops && mcbsp->pdata->ops->free)
|
|
mcbsp->pdata->ops->free(mcbsp->id - 1);
|
|
|
|
/* Disable wakeup behavior */
|
|
if (mcbsp->pdata->has_wakeup)
|
|
MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
|
|
|
|
/* Disable interrupt requests */
|
|
if (mcbsp->irq)
|
|
MCBSP_WRITE(mcbsp, IRQEN, 0);
|
|
|
|
if (mcbsp->irq) {
|
|
free_irq(mcbsp->irq, (void *)mcbsp);
|
|
} else {
|
|
free_irq(mcbsp->rx_irq, (void *)mcbsp);
|
|
free_irq(mcbsp->tx_irq, (void *)mcbsp);
|
|
}
|
|
|
|
reg_cache = mcbsp->reg_cache;
|
|
|
|
/*
|
|
* Select CLKS source from internal source unconditionally before
|
|
* marking the McBSP port as free.
|
|
* If the external clock source via MCBSP_CLKS pin has been selected the
|
|
* system will refuse to enter idle if the CLKS pin source is not reset
|
|
* back to internal source.
|
|
*/
|
|
if (!mcbsp_omap1())
|
|
omap2_mcbsp_set_clks_src(mcbsp, MCBSP_CLKS_PRCM_SRC);
|
|
|
|
spin_lock(&mcbsp->lock);
|
|
if (mcbsp->free)
|
|
dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id);
|
|
else
|
|
mcbsp->free = true;
|
|
mcbsp->reg_cache = NULL;
|
|
spin_unlock(&mcbsp->lock);
|
|
|
|
kfree(reg_cache);
|
|
}
|
|
|
|
/*
|
|
* Here we start the McBSP, by enabling transmitter, receiver or both.
|
|
* If no transmitter or receiver is active prior calling, then sample-rate
|
|
* generator and frame sync are started.
|
|
*/
|
|
static void omap_mcbsp_start(struct omap_mcbsp *mcbsp, int stream)
|
|
{
|
|
int tx = (stream == SNDRV_PCM_STREAM_PLAYBACK);
|
|
int rx = !tx;
|
|
int enable_srg = 0;
|
|
u16 w;
|
|
|
|
if (mcbsp->st_data)
|
|
omap_mcbsp_st_start(mcbsp);
|
|
|
|
/* Only enable SRG, if McBSP is master */
|
|
w = MCBSP_READ_CACHE(mcbsp, PCR0);
|
|
if (w & (FSXM | FSRM | CLKXM | CLKRM))
|
|
enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
|
|
MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
|
|
|
|
if (enable_srg) {
|
|
/* Start the sample generator */
|
|
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
|
|
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
|
|
}
|
|
|
|
/* Enable transmitter and receiver */
|
|
tx &= 1;
|
|
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
|
|
MCBSP_WRITE(mcbsp, SPCR2, w | tx);
|
|
|
|
rx &= 1;
|
|
w = MCBSP_READ_CACHE(mcbsp, SPCR1);
|
|
MCBSP_WRITE(mcbsp, SPCR1, w | rx);
|
|
|
|
/*
|
|
* Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
|
|
* REVISIT: 100us may give enough time for two CLKSRG, however
|
|
* due to some unknown PM related, clock gating etc. reason it
|
|
* is now at 500us.
|
|
*/
|
|
udelay(500);
|
|
|
|
if (enable_srg) {
|
|
/* Start frame sync */
|
|
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
|
|
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
|
|
}
|
|
|
|
if (mcbsp->pdata->has_ccr) {
|
|
/* Release the transmitter and receiver */
|
|
w = MCBSP_READ_CACHE(mcbsp, XCCR);
|
|
w &= ~(tx ? XDISABLE : 0);
|
|
MCBSP_WRITE(mcbsp, XCCR, w);
|
|
w = MCBSP_READ_CACHE(mcbsp, RCCR);
|
|
w &= ~(rx ? RDISABLE : 0);
|
|
MCBSP_WRITE(mcbsp, RCCR, w);
|
|
}
|
|
|
|
/* Dump McBSP Regs */
|
|
omap_mcbsp_dump_reg(mcbsp);
|
|
}
|
|
|
|
static void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int stream)
|
|
{
|
|
int tx = (stream == SNDRV_PCM_STREAM_PLAYBACK);
|
|
int rx = !tx;
|
|
int idle;
|
|
u16 w;
|
|
|
|
/* Reset transmitter */
|
|
tx &= 1;
|
|
if (mcbsp->pdata->has_ccr) {
|
|
w = MCBSP_READ_CACHE(mcbsp, XCCR);
|
|
w |= (tx ? XDISABLE : 0);
|
|
MCBSP_WRITE(mcbsp, XCCR, w);
|
|
}
|
|
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
|
|
MCBSP_WRITE(mcbsp, SPCR2, w & ~tx);
|
|
|
|
/* Reset receiver */
|
|
rx &= 1;
|
|
if (mcbsp->pdata->has_ccr) {
|
|
w = MCBSP_READ_CACHE(mcbsp, RCCR);
|
|
w |= (rx ? RDISABLE : 0);
|
|
MCBSP_WRITE(mcbsp, RCCR, w);
|
|
}
|
|
w = MCBSP_READ_CACHE(mcbsp, SPCR1);
|
|
MCBSP_WRITE(mcbsp, SPCR1, w & ~rx);
|
|
|
|
idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
|
|
MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
|
|
|
|
if (idle) {
|
|
/* Reset the sample rate generator */
|
|
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
|
|
MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
|
|
}
|
|
|
|
if (mcbsp->st_data)
|
|
omap_mcbsp_st_stop(mcbsp);
|
|
}
|
|
|
|
#define max_thres(m) (mcbsp->pdata->buffer_size)
|
|
#define valid_threshold(m, val) ((val) <= max_thres(m))
|
|
#define THRESHOLD_PROP_BUILDER(prop) \
|
|
static ssize_t prop##_show(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \
|
|
\
|
|
return sprintf(buf, "%u\n", mcbsp->prop); \
|
|
} \
|
|
\
|
|
static ssize_t prop##_store(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
const char *buf, size_t size) \
|
|
{ \
|
|
struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \
|
|
unsigned long val; \
|
|
int status; \
|
|
\
|
|
status = kstrtoul(buf, 0, &val); \
|
|
if (status) \
|
|
return status; \
|
|
\
|
|
if (!valid_threshold(mcbsp, val)) \
|
|
return -EDOM; \
|
|
\
|
|
mcbsp->prop = val; \
|
|
return size; \
|
|
} \
|
|
\
|
|
static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store)
|
|
|
|
THRESHOLD_PROP_BUILDER(max_tx_thres);
|
|
THRESHOLD_PROP_BUILDER(max_rx_thres);
|
|
|
|
static const char * const dma_op_modes[] = {
|
|
"element", "threshold",
|
|
};
|
|
|
|
static ssize_t dma_op_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
|
|
int dma_op_mode, i = 0;
|
|
ssize_t len = 0;
|
|
const char * const *s;
|
|
|
|
dma_op_mode = mcbsp->dma_op_mode;
|
|
|
|
for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
|
|
if (dma_op_mode == i)
|
|
len += sprintf(buf + len, "[%s] ", *s);
|
|
else
|
|
len += sprintf(buf + len, "%s ", *s);
|
|
}
|
|
len += sprintf(buf + len, "\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t dma_op_mode_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t size)
|
|
{
|
|
struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
|
|
int i;
|
|
|
|
i = sysfs_match_string(dma_op_modes, buf);
|
|
if (i < 0)
|
|
return i;
|
|
|
|
spin_lock_irq(&mcbsp->lock);
|
|
if (!mcbsp->free) {
|
|
size = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
mcbsp->dma_op_mode = i;
|
|
|
|
unlock:
|
|
spin_unlock_irq(&mcbsp->lock);
|
|
|
|
return size;
|
|
}
|
|
|
|
static DEVICE_ATTR_RW(dma_op_mode);
|
|
|
|
static const struct attribute *additional_attrs[] = {
|
|
&dev_attr_max_tx_thres.attr,
|
|
&dev_attr_max_rx_thres.attr,
|
|
&dev_attr_dma_op_mode.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group additional_attr_group = {
|
|
.attrs = (struct attribute **)additional_attrs,
|
|
};
|
|
|
|
/*
|
|
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
|
|
* 730 has only 2 McBSP, and both of them are MPU peripherals.
|
|
*/
|
|
static int omap_mcbsp_init(struct platform_device *pdev)
|
|
{
|
|
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
|
|
struct resource *res;
|
|
int ret = 0;
|
|
|
|
spin_lock_init(&mcbsp->lock);
|
|
mcbsp->free = true;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
|
|
if (!res)
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
mcbsp->io_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(mcbsp->io_base))
|
|
return PTR_ERR(mcbsp->io_base);
|
|
|
|
mcbsp->phys_base = res->start;
|
|
mcbsp->reg_cache_size = resource_size(res);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
|
|
if (!res)
|
|
mcbsp->phys_dma_base = mcbsp->phys_base;
|
|
else
|
|
mcbsp->phys_dma_base = res->start;
|
|
|
|
/*
|
|
* OMAP1, 2 uses two interrupt lines: TX, RX
|
|
* OMAP2430, OMAP3 SoC have combined IRQ line as well.
|
|
* OMAP4 and newer SoC only have the combined IRQ line.
|
|
* Use the combined IRQ if available since it gives better debugging
|
|
* possibilities.
|
|
*/
|
|
mcbsp->irq = platform_get_irq_byname(pdev, "common");
|
|
if (mcbsp->irq == -ENXIO) {
|
|
mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
|
|
|
|
if (mcbsp->tx_irq == -ENXIO) {
|
|
mcbsp->irq = platform_get_irq(pdev, 0);
|
|
mcbsp->tx_irq = 0;
|
|
} else {
|
|
mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
|
|
mcbsp->irq = 0;
|
|
}
|
|
}
|
|
|
|
if (!pdev->dev.of_node) {
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "invalid tx DMA channel\n");
|
|
return -ENODEV;
|
|
}
|
|
mcbsp->dma_req[0] = res->start;
|
|
mcbsp->dma_data[0].filter_data = &mcbsp->dma_req[0];
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "invalid rx DMA channel\n");
|
|
return -ENODEV;
|
|
}
|
|
mcbsp->dma_req[1] = res->start;
|
|
mcbsp->dma_data[1].filter_data = &mcbsp->dma_req[1];
|
|
} else {
|
|
mcbsp->dma_data[0].filter_data = "tx";
|
|
mcbsp->dma_data[1].filter_data = "rx";
|
|
}
|
|
|
|
mcbsp->dma_data[0].addr = omap_mcbsp_dma_reg_params(mcbsp,
|
|
SNDRV_PCM_STREAM_PLAYBACK);
|
|
mcbsp->dma_data[1].addr = omap_mcbsp_dma_reg_params(mcbsp,
|
|
SNDRV_PCM_STREAM_CAPTURE);
|
|
|
|
mcbsp->fclk = clk_get(&pdev->dev, "fck");
|
|
if (IS_ERR(mcbsp->fclk)) {
|
|
ret = PTR_ERR(mcbsp->fclk);
|
|
dev_err(mcbsp->dev, "unable to get fck: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
|
|
if (mcbsp->pdata->buffer_size) {
|
|
/*
|
|
* Initially configure the maximum thresholds to a safe value.
|
|
* The McBSP FIFO usage with these values should not go under
|
|
* 16 locations.
|
|
* If the whole FIFO without safety buffer is used, than there
|
|
* is a possibility that the DMA will be not able to push the
|
|
* new data on time, causing channel shifts in runtime.
|
|
*/
|
|
mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
|
|
mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
|
|
|
|
ret = sysfs_create_group(&mcbsp->dev->kobj,
|
|
&additional_attr_group);
|
|
if (ret) {
|
|
dev_err(mcbsp->dev,
|
|
"Unable to create additional controls\n");
|
|
goto err_thres;
|
|
}
|
|
}
|
|
|
|
ret = omap_mcbsp_st_init(pdev);
|
|
if (ret)
|
|
goto err_st;
|
|
|
|
return 0;
|
|
|
|
err_st:
|
|
if (mcbsp->pdata->buffer_size)
|
|
sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
|
|
err_thres:
|
|
clk_put(mcbsp->fclk);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Stream DMA parameters. DMA request line and port address are set runtime
|
|
* since they are different between OMAP1 and later OMAPs
|
|
*/
|
|
static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream,
|
|
unsigned int packet_size)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
int words;
|
|
|
|
/* No need to proceed further if McBSP does not have FIFO */
|
|
if (mcbsp->pdata->buffer_size == 0)
|
|
return;
|
|
|
|
/*
|
|
* Configure McBSP threshold based on either:
|
|
* packet_size, when the sDMA is in packet mode, or based on the
|
|
* period size in THRESHOLD mode, otherwise use McBSP threshold = 1
|
|
* for mono streams.
|
|
*/
|
|
if (packet_size)
|
|
words = packet_size;
|
|
else
|
|
words = 1;
|
|
|
|
/* Configure McBSP internal buffer usage */
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
omap_mcbsp_set_tx_threshold(mcbsp, words);
|
|
else
|
|
omap_mcbsp_set_rx_threshold(mcbsp, words);
|
|
}
|
|
|
|
static int omap_mcbsp_hwrule_min_buffersize(struct snd_pcm_hw_params *params,
|
|
struct snd_pcm_hw_rule *rule)
|
|
{
|
|
struct snd_interval *buffer_size = hw_param_interval(params,
|
|
SNDRV_PCM_HW_PARAM_BUFFER_SIZE);
|
|
struct snd_interval *channels = hw_param_interval(params,
|
|
SNDRV_PCM_HW_PARAM_CHANNELS);
|
|
struct omap_mcbsp *mcbsp = rule->private;
|
|
struct snd_interval frames;
|
|
int size;
|
|
|
|
snd_interval_any(&frames);
|
|
size = mcbsp->pdata->buffer_size;
|
|
|
|
frames.min = size / channels->min;
|
|
frames.integer = 1;
|
|
return snd_interval_refine(buffer_size, &frames);
|
|
}
|
|
|
|
static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
int err = 0;
|
|
|
|
if (!cpu_dai->active)
|
|
err = omap_mcbsp_request(mcbsp);
|
|
|
|
/*
|
|
* OMAP3 McBSP FIFO is word structured.
|
|
* McBSP2 has 1024 + 256 = 1280 word long buffer,
|
|
* McBSP1,3,4,5 has 128 word long buffer
|
|
* This means that the size of the FIFO depends on the sample format.
|
|
* For example on McBSP3:
|
|
* 16bit samples: size is 128 * 2 = 256 bytes
|
|
* 32bit samples: size is 128 * 4 = 512 bytes
|
|
* It is simpler to place constraint for buffer and period based on
|
|
* channels.
|
|
* McBSP3 as example again (16 or 32 bit samples):
|
|
* 1 channel (mono): size is 128 frames (128 words)
|
|
* 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words)
|
|
* 4 channels: size is 128 / 4 = 32 frames (4 * 32 words)
|
|
*/
|
|
if (mcbsp->pdata->buffer_size) {
|
|
/*
|
|
* Rule for the buffer size. We should not allow
|
|
* smaller buffer than the FIFO size to avoid underruns.
|
|
* This applies only for the playback stream.
|
|
*/
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
snd_pcm_hw_rule_add(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
|
|
omap_mcbsp_hwrule_min_buffersize,
|
|
mcbsp,
|
|
SNDRV_PCM_HW_PARAM_CHANNELS, -1);
|
|
|
|
/* Make sure, that the period size is always even */
|
|
snd_pcm_hw_constraint_step(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void omap_mcbsp_dai_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
|
|
int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
|
|
int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
|
|
if (mcbsp->latency[stream2])
|
|
pm_qos_update_request(&mcbsp->pm_qos_req,
|
|
mcbsp->latency[stream2]);
|
|
else if (mcbsp->latency[stream1])
|
|
pm_qos_remove_request(&mcbsp->pm_qos_req);
|
|
|
|
mcbsp->latency[stream1] = 0;
|
|
|
|
if (!cpu_dai->active) {
|
|
omap_mcbsp_free(mcbsp);
|
|
mcbsp->configured = 0;
|
|
}
|
|
}
|
|
|
|
static int omap_mcbsp_dai_prepare(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct pm_qos_request *pm_qos_req = &mcbsp->pm_qos_req;
|
|
int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
|
|
int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
|
|
int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
|
|
int latency = mcbsp->latency[stream2];
|
|
|
|
/* Prevent omap hardware from hitting off between FIFO fills */
|
|
if (!latency || mcbsp->latency[stream1] < latency)
|
|
latency = mcbsp->latency[stream1];
|
|
|
|
if (pm_qos_request_active(pm_qos_req))
|
|
pm_qos_update_request(pm_qos_req, latency);
|
|
else if (latency)
|
|
pm_qos_add_request(pm_qos_req, PM_QOS_CPU_DMA_LATENCY, latency);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
mcbsp->active++;
|
|
omap_mcbsp_start(mcbsp, substream->stream);
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
omap_mcbsp_stop(mcbsp, substream->stream);
|
|
mcbsp->active--;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static snd_pcm_sframes_t omap_mcbsp_dai_delay(
|
|
struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
u16 fifo_use;
|
|
snd_pcm_sframes_t delay;
|
|
|
|
/* No need to proceed further if McBSP does not have FIFO */
|
|
if (mcbsp->pdata->buffer_size == 0)
|
|
return 0;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
fifo_use = omap_mcbsp_get_tx_delay(mcbsp);
|
|
else
|
|
fifo_use = omap_mcbsp_get_rx_delay(mcbsp);
|
|
|
|
/*
|
|
* Divide the used locations with the channel count to get the
|
|
* FIFO usage in samples (don't care about partial samples in the
|
|
* buffer).
|
|
*/
|
|
delay = fifo_use / substream->runtime->channels;
|
|
|
|
return delay;
|
|
}
|
|
|
|
static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
|
|
struct snd_dmaengine_dai_dma_data *dma_data;
|
|
int wlen, channels, wpf;
|
|
int pkt_size = 0;
|
|
unsigned int format, div, framesize, master;
|
|
unsigned int buffer_size = mcbsp->pdata->buffer_size;
|
|
|
|
dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
|
|
channels = params_channels(params);
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
wlen = 16;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
wlen = 32;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
if (buffer_size) {
|
|
int latency;
|
|
|
|
if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
|
|
int period_words, max_thrsh;
|
|
int divider = 0;
|
|
|
|
period_words = params_period_bytes(params) / (wlen / 8);
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
max_thrsh = mcbsp->max_tx_thres;
|
|
else
|
|
max_thrsh = mcbsp->max_rx_thres;
|
|
/*
|
|
* Use sDMA packet mode if McBSP is in threshold mode:
|
|
* If period words less than the FIFO size the packet
|
|
* size is set to the number of period words, otherwise
|
|
* Look for the biggest threshold value which divides
|
|
* the period size evenly.
|
|
*/
|
|
divider = period_words / max_thrsh;
|
|
if (period_words % max_thrsh)
|
|
divider++;
|
|
while (period_words % divider &&
|
|
divider < period_words)
|
|
divider++;
|
|
if (divider == period_words)
|
|
return -EINVAL;
|
|
|
|
pkt_size = period_words / divider;
|
|
} else if (channels > 1) {
|
|
/* Use packet mode for non mono streams */
|
|
pkt_size = channels;
|
|
}
|
|
|
|
latency = (buffer_size - pkt_size) / channels;
|
|
latency = latency * USEC_PER_SEC /
|
|
(params->rate_num / params->rate_den);
|
|
mcbsp->latency[substream->stream] = latency;
|
|
|
|
omap_mcbsp_set_threshold(substream, pkt_size);
|
|
}
|
|
|
|
dma_data->maxburst = pkt_size;
|
|
|
|
if (mcbsp->configured) {
|
|
/* McBSP already configured by another stream */
|
|
return 0;
|
|
}
|
|
|
|
regs->rcr2 &= ~(RPHASE | RFRLEN2(0x7f) | RWDLEN2(7));
|
|
regs->xcr2 &= ~(RPHASE | XFRLEN2(0x7f) | XWDLEN2(7));
|
|
regs->rcr1 &= ~(RFRLEN1(0x7f) | RWDLEN1(7));
|
|
regs->xcr1 &= ~(XFRLEN1(0x7f) | XWDLEN1(7));
|
|
format = mcbsp->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
|
|
wpf = channels;
|
|
if (channels == 2 && (format == SND_SOC_DAIFMT_I2S ||
|
|
format == SND_SOC_DAIFMT_LEFT_J)) {
|
|
/* Use dual-phase frames */
|
|
regs->rcr2 |= RPHASE;
|
|
regs->xcr2 |= XPHASE;
|
|
/* Set 1 word per (McBSP) frame for phase1 and phase2 */
|
|
wpf--;
|
|
regs->rcr2 |= RFRLEN2(wpf - 1);
|
|
regs->xcr2 |= XFRLEN2(wpf - 1);
|
|
}
|
|
|
|
regs->rcr1 |= RFRLEN1(wpf - 1);
|
|
regs->xcr1 |= XFRLEN1(wpf - 1);
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
/* Set word lengths */
|
|
regs->rcr2 |= RWDLEN2(OMAP_MCBSP_WORD_16);
|
|
regs->rcr1 |= RWDLEN1(OMAP_MCBSP_WORD_16);
|
|
regs->xcr2 |= XWDLEN2(OMAP_MCBSP_WORD_16);
|
|
regs->xcr1 |= XWDLEN1(OMAP_MCBSP_WORD_16);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
/* Set word lengths */
|
|
regs->rcr2 |= RWDLEN2(OMAP_MCBSP_WORD_32);
|
|
regs->rcr1 |= RWDLEN1(OMAP_MCBSP_WORD_32);
|
|
regs->xcr2 |= XWDLEN2(OMAP_MCBSP_WORD_32);
|
|
regs->xcr1 |= XWDLEN1(OMAP_MCBSP_WORD_32);
|
|
break;
|
|
default:
|
|
/* Unsupported PCM format */
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* In McBSP master modes, FRAME (i.e. sample rate) is generated
|
|
* by _counting_ BCLKs. Calculate frame size in BCLKs */
|
|
master = mcbsp->fmt & SND_SOC_DAIFMT_MASTER_MASK;
|
|
if (master == SND_SOC_DAIFMT_CBS_CFS) {
|
|
div = mcbsp->clk_div ? mcbsp->clk_div : 1;
|
|
framesize = (mcbsp->in_freq / div) / params_rate(params);
|
|
|
|
if (framesize < wlen * channels) {
|
|
printk(KERN_ERR "%s: not enough bandwidth for desired rate and "
|
|
"channels\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
} else
|
|
framesize = wlen * channels;
|
|
|
|
/* Set FS period and length in terms of bit clock periods */
|
|
regs->srgr2 &= ~FPER(0xfff);
|
|
regs->srgr1 &= ~FWID(0xff);
|
|
switch (format) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
regs->srgr2 |= FPER(framesize - 1);
|
|
regs->srgr1 |= FWID((framesize >> 1) - 1);
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
regs->srgr2 |= FPER(framesize - 1);
|
|
regs->srgr1 |= FWID(0);
|
|
break;
|
|
}
|
|
|
|
omap_mcbsp_config(mcbsp, &mcbsp->cfg_regs);
|
|
mcbsp->wlen = wlen;
|
|
mcbsp->configured = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This must be called before _set_clkdiv and _set_sysclk since McBSP register
|
|
* cache is initialized here
|
|
*/
|
|
static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
|
|
bool inv_fs = false;
|
|
|
|
if (mcbsp->configured)
|
|
return 0;
|
|
|
|
mcbsp->fmt = fmt;
|
|
memset(regs, 0, sizeof(*regs));
|
|
/* Generic McBSP register settings */
|
|
regs->spcr2 |= XINTM(3) | FREE;
|
|
regs->spcr1 |= RINTM(3);
|
|
/* RFIG and XFIG are not defined in 2430 and on OMAP3+ */
|
|
if (!mcbsp->pdata->has_ccr) {
|
|
regs->rcr2 |= RFIG;
|
|
regs->xcr2 |= XFIG;
|
|
}
|
|
|
|
/* Configure XCCR/RCCR only for revisions which have ccr registers */
|
|
if (mcbsp->pdata->has_ccr) {
|
|
regs->xccr = DXENDLY(1) | XDMAEN | XDISABLE;
|
|
regs->rccr = RFULL_CYCLE | RDMAEN | RDISABLE;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
/* 1-bit data delay */
|
|
regs->rcr2 |= RDATDLY(1);
|
|
regs->xcr2 |= XDATDLY(1);
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
/* 0-bit data delay */
|
|
regs->rcr2 |= RDATDLY(0);
|
|
regs->xcr2 |= XDATDLY(0);
|
|
regs->spcr1 |= RJUST(2);
|
|
/* Invert FS polarity configuration */
|
|
inv_fs = true;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
/* 1-bit data delay */
|
|
regs->rcr2 |= RDATDLY(1);
|
|
regs->xcr2 |= XDATDLY(1);
|
|
/* Invert FS polarity configuration */
|
|
inv_fs = true;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/* 0-bit data delay */
|
|
regs->rcr2 |= RDATDLY(0);
|
|
regs->xcr2 |= XDATDLY(0);
|
|
/* Invert FS polarity configuration */
|
|
inv_fs = true;
|
|
break;
|
|
default:
|
|
/* Unsupported data format */
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
/* McBSP master. Set FS and bit clocks as outputs */
|
|
regs->pcr0 |= FSXM | FSRM |
|
|
CLKXM | CLKRM;
|
|
/* Sample rate generator drives the FS */
|
|
regs->srgr2 |= FSGM;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
/* McBSP slave. FS clock as output */
|
|
regs->srgr2 |= FSGM;
|
|
regs->pcr0 |= FSXM | FSRM;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
/* McBSP slave */
|
|
break;
|
|
default:
|
|
/* Unsupported master/slave configuration */
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set bit clock (CLKX/CLKR) and FS polarities */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
/*
|
|
* Normal BCLK + FS.
|
|
* FS active low. TX data driven on falling edge of bit clock
|
|
* and RX data sampled on rising edge of bit clock.
|
|
*/
|
|
regs->pcr0 |= FSXP | FSRP |
|
|
CLKXP | CLKRP;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
regs->pcr0 |= CLKXP | CLKRP;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
regs->pcr0 |= FSXP | FSRP;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
if (inv_fs == true)
|
|
regs->pcr0 ^= FSXP | FSRP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_mcbsp_dai_set_clkdiv(struct snd_soc_dai *cpu_dai,
|
|
int div_id, int div)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
|
|
|
|
if (div_id != OMAP_MCBSP_CLKGDV)
|
|
return -ENODEV;
|
|
|
|
mcbsp->clk_div = div;
|
|
regs->srgr1 &= ~CLKGDV(0xff);
|
|
regs->srgr1 |= CLKGDV(div - 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq,
|
|
int dir)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
|
|
int err = 0;
|
|
|
|
if (mcbsp->active) {
|
|
if (freq == mcbsp->in_freq)
|
|
return 0;
|
|
else
|
|
return -EBUSY;
|
|
}
|
|
|
|
mcbsp->in_freq = freq;
|
|
regs->srgr2 &= ~CLKSM;
|
|
regs->pcr0 &= ~SCLKME;
|
|
|
|
switch (clk_id) {
|
|
case OMAP_MCBSP_SYSCLK_CLK:
|
|
regs->srgr2 |= CLKSM;
|
|
break;
|
|
case OMAP_MCBSP_SYSCLK_CLKS_FCLK:
|
|
if (mcbsp_omap1()) {
|
|
err = -EINVAL;
|
|
break;
|
|
}
|
|
err = omap2_mcbsp_set_clks_src(mcbsp,
|
|
MCBSP_CLKS_PRCM_SRC);
|
|
break;
|
|
case OMAP_MCBSP_SYSCLK_CLKS_EXT:
|
|
if (mcbsp_omap1()) {
|
|
err = 0;
|
|
break;
|
|
}
|
|
err = omap2_mcbsp_set_clks_src(mcbsp,
|
|
MCBSP_CLKS_PAD_SRC);
|
|
break;
|
|
|
|
case OMAP_MCBSP_SYSCLK_CLKX_EXT:
|
|
regs->srgr2 |= CLKSM;
|
|
regs->pcr0 |= SCLKME;
|
|
/*
|
|
* If McBSP is master but yet the CLKX/CLKR pin drives the SRG,
|
|
* disable output on those pins. This enables to inject the
|
|
* reference clock through CLKX/CLKR. For this to work
|
|
* set_dai_sysclk() _needs_ to be called after set_dai_fmt().
|
|
*/
|
|
regs->pcr0 &= ~CLKXM;
|
|
break;
|
|
case OMAP_MCBSP_SYSCLK_CLKR_EXT:
|
|
regs->pcr0 |= SCLKME;
|
|
/* Disable ouput on CLKR pin in master mode */
|
|
regs->pcr0 &= ~CLKRM;
|
|
break;
|
|
default:
|
|
err = -ENODEV;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops mcbsp_dai_ops = {
|
|
.startup = omap_mcbsp_dai_startup,
|
|
.shutdown = omap_mcbsp_dai_shutdown,
|
|
.prepare = omap_mcbsp_dai_prepare,
|
|
.trigger = omap_mcbsp_dai_trigger,
|
|
.delay = omap_mcbsp_dai_delay,
|
|
.hw_params = omap_mcbsp_dai_hw_params,
|
|
.set_fmt = omap_mcbsp_dai_set_dai_fmt,
|
|
.set_clkdiv = omap_mcbsp_dai_set_clkdiv,
|
|
.set_sysclk = omap_mcbsp_dai_set_dai_sysclk,
|
|
};
|
|
|
|
static int omap_mcbsp_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pm_runtime_enable(mcbsp->dev);
|
|
|
|
snd_soc_dai_init_dma_data(dai,
|
|
&mcbsp->dma_data[SNDRV_PCM_STREAM_PLAYBACK],
|
|
&mcbsp->dma_data[SNDRV_PCM_STREAM_CAPTURE]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_mcbsp_remove(struct snd_soc_dai *dai)
|
|
{
|
|
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pm_runtime_disable(mcbsp->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dai_driver omap_mcbsp_dai = {
|
|
.probe = omap_mcbsp_probe,
|
|
.remove = omap_mcbsp_remove,
|
|
.playback = {
|
|
.channels_min = 1,
|
|
.channels_max = 16,
|
|
.rates = OMAP_MCBSP_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
|
|
},
|
|
.capture = {
|
|
.channels_min = 1,
|
|
.channels_max = 16,
|
|
.rates = OMAP_MCBSP_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
|
|
},
|
|
.ops = &mcbsp_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver omap_mcbsp_component = {
|
|
.name = "omap-mcbsp",
|
|
};
|
|
|
|
static struct omap_mcbsp_platform_data omap2420_pdata = {
|
|
.reg_step = 4,
|
|
.reg_size = 2,
|
|
};
|
|
|
|
static struct omap_mcbsp_platform_data omap2430_pdata = {
|
|
.reg_step = 4,
|
|
.reg_size = 4,
|
|
.has_ccr = true,
|
|
};
|
|
|
|
static struct omap_mcbsp_platform_data omap3_pdata = {
|
|
.reg_step = 4,
|
|
.reg_size = 4,
|
|
.has_ccr = true,
|
|
.has_wakeup = true,
|
|
};
|
|
|
|
static struct omap_mcbsp_platform_data omap4_pdata = {
|
|
.reg_step = 4,
|
|
.reg_size = 4,
|
|
.has_ccr = true,
|
|
.has_wakeup = true,
|
|
};
|
|
|
|
static const struct of_device_id omap_mcbsp_of_match[] = {
|
|
{
|
|
.compatible = "ti,omap2420-mcbsp",
|
|
.data = &omap2420_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,omap2430-mcbsp",
|
|
.data = &omap2430_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,omap3-mcbsp",
|
|
.data = &omap3_pdata,
|
|
},
|
|
{
|
|
.compatible = "ti,omap4-mcbsp",
|
|
.data = &omap4_pdata,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_mcbsp_of_match);
|
|
|
|
static int asoc_mcbsp_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_mcbsp_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct omap_mcbsp *mcbsp;
|
|
const struct of_device_id *match;
|
|
int ret;
|
|
|
|
match = of_match_device(omap_mcbsp_of_match, &pdev->dev);
|
|
if (match) {
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct omap_mcbsp_platform_data *pdata_quirk = pdata;
|
|
int buffer_size;
|
|
|
|
pdata = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct omap_mcbsp_platform_data),
|
|
GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
memcpy(pdata, match->data, sizeof(*pdata));
|
|
if (!of_property_read_u32(node, "ti,buffer-size", &buffer_size))
|
|
pdata->buffer_size = buffer_size;
|
|
if (pdata_quirk)
|
|
pdata->force_ick_on = pdata_quirk->force_ick_on;
|
|
} else if (!pdata) {
|
|
dev_err(&pdev->dev, "missing platform data.\n");
|
|
return -EINVAL;
|
|
}
|
|
mcbsp = devm_kzalloc(&pdev->dev, sizeof(struct omap_mcbsp), GFP_KERNEL);
|
|
if (!mcbsp)
|
|
return -ENOMEM;
|
|
|
|
mcbsp->id = pdev->id;
|
|
mcbsp->pdata = pdata;
|
|
mcbsp->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, mcbsp);
|
|
|
|
ret = omap_mcbsp_init(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (mcbsp->pdata->reg_size == 2) {
|
|
omap_mcbsp_dai.playback.formats = SNDRV_PCM_FMTBIT_S16_LE;
|
|
omap_mcbsp_dai.capture.formats = SNDRV_PCM_FMTBIT_S16_LE;
|
|
}
|
|
|
|
ret = devm_snd_soc_register_component(&pdev->dev,
|
|
&omap_mcbsp_component,
|
|
&omap_mcbsp_dai, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return sdma_pcm_platform_register(&pdev->dev, NULL, NULL);
|
|
}
|
|
|
|
static int asoc_mcbsp_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
|
|
|
|
if (mcbsp->pdata->ops && mcbsp->pdata->ops->free)
|
|
mcbsp->pdata->ops->free(mcbsp->id);
|
|
|
|
if (pm_qos_request_active(&mcbsp->pm_qos_req))
|
|
pm_qos_remove_request(&mcbsp->pm_qos_req);
|
|
|
|
if (mcbsp->pdata->buffer_size)
|
|
sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group);
|
|
|
|
omap_mcbsp_st_cleanup(pdev);
|
|
|
|
clk_put(mcbsp->fclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver asoc_mcbsp_driver = {
|
|
.driver = {
|
|
.name = "omap-mcbsp",
|
|
.of_match_table = omap_mcbsp_of_match,
|
|
},
|
|
|
|
.probe = asoc_mcbsp_probe,
|
|
.remove = asoc_mcbsp_remove,
|
|
};
|
|
|
|
module_platform_driver(asoc_mcbsp_driver);
|
|
|
|
MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
|
|
MODULE_DESCRIPTION("OMAP I2S SoC Interface");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:omap-mcbsp");
|