linux/arch/arm/mach-integrator/core.c

221 lines
5.1 KiB
C

/*
* linux/arch/arm/mach-integrator/core.c
*
* Copyright (C) 2000-2003 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/memblock.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/io.h>
#include <linux/stat.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/cm.h>
#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
#include "common.h"
#ifdef CONFIG_ATAGS
#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 }
#define KMI0_IRQ { IRQ_KMIINT0 }
#define KMI1_IRQ { IRQ_KMIINT1 }
static AMBA_APB_DEVICE(rtc, "rtc", 0,
INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
static AMBA_APB_DEVICE(uart0, "uart0", 0,
INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL);
static AMBA_APB_DEVICE(uart1, "uart1", 0,
INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL);
static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
&uart0_device,
&uart1_device,
&kmi0_device,
&kmi1_device,
};
int __init integrator_init(bool is_cp)
{
int i;
/*
* The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
* hard-code them. The Integator/CP and forward have proper cell IDs.
* Else we leave them undefined to the bus driver can autoprobe them.
*/
if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) {
rtc_device.periphid = 0x00041030;
uart0_device.periphid = 0x00041010;
uart1_device.periphid = 0x00041010;
kmi0_device.periphid = 0x00041050;
kmi1_device.periphid = 0x00041050;
uart0_device.dev.platform_data = &ap_uart_data;
uart1_device.dev.platform_data = &ap_uart_data;
}
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
return 0;
}
#endif
static DEFINE_RAW_SPINLOCK(cm_lock);
/**
* cm_control - update the CM_CTRL register.
* @mask: bits to change
* @set: bits to set
*/
void cm_control(u32 mask, u32 set)
{
unsigned long flags;
u32 val;
raw_spin_lock_irqsave(&cm_lock, flags);
val = readl(CM_CTRL) & ~mask;
writel(val | set, CM_CTRL);
raw_spin_unlock_irqrestore(&cm_lock, flags);
}
EXPORT_SYMBOL(cm_control);
/*
* We need to stop things allocating the low memory; ideally we need a
* better implementation of GFP_DMA which does not assume that DMA-able
* memory starts at zero.
*/
void __init integrator_reserve(void)
{
memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
}
/*
* To reset, we hit the on-board reset register in the system FPGA
*/
void integrator_restart(enum reboot_mode mode, const char *cmd)
{
cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
}
static u32 integrator_id;
static ssize_t intcp_get_manf(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%02x\n", integrator_id >> 24);
}
static struct device_attribute intcp_manf_attr =
__ATTR(manufacturer, S_IRUGO, intcp_get_manf, NULL);
static ssize_t intcp_get_arch(struct device *dev,
struct device_attribute *attr,
char *buf)
{
const char *arch;
switch ((integrator_id >> 16) & 0xff) {
case 0x00:
arch = "ASB little-endian";
break;
case 0x01:
arch = "AHB little-endian";
break;
case 0x03:
arch = "AHB-Lite system bus, bi-endian";
break;
case 0x04:
arch = "AHB";
break;
default:
arch = "Unknown";
break;
}
return sprintf(buf, "%s\n", arch);
}
static struct device_attribute intcp_arch_attr =
__ATTR(architecture, S_IRUGO, intcp_get_arch, NULL);
static ssize_t intcp_get_fpga(struct device *dev,
struct device_attribute *attr,
char *buf)
{
const char *fpga;
switch ((integrator_id >> 12) & 0xf) {
case 0x01:
fpga = "XC4062";
break;
case 0x02:
fpga = "XC4085";
break;
case 0x04:
fpga = "EPM7256AE (Altera PLD)";
break;
default:
fpga = "Unknown";
break;
}
return sprintf(buf, "%s\n", fpga);
}
static struct device_attribute intcp_fpga_attr =
__ATTR(fpga, S_IRUGO, intcp_get_fpga, NULL);
static ssize_t intcp_get_build(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%02x\n", (integrator_id >> 4) & 0xFF);
}
static struct device_attribute intcp_build_attr =
__ATTR(build, S_IRUGO, intcp_get_build, NULL);
void integrator_init_sysfs(struct device *parent, u32 id)
{
integrator_id = id;
device_create_file(parent, &intcp_manf_attr);
device_create_file(parent, &intcp_arch_attr);
device_create_file(parent, &intcp_fpga_attr);
device_create_file(parent, &intcp_build_attr);
}