linux/drivers/usb/storage/transport.h

147 lines
5.2 KiB
C

/* Driver for USB Mass Storage compliant devices
* Transport Functions Header File
*
* $Id: transport.h,v 1.18 2002/04/21 02:57:59 mdharm Exp $
*
* Current development and maintenance by:
* (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* This driver is based on the 'USB Mass Storage Class' document. This
* describes in detail the protocol used to communicate with such
* devices. Clearly, the designers had SCSI and ATAPI commands in
* mind when they created this document. The commands are all very
* similar to commands in the SCSI-II and ATAPI specifications.
*
* It is important to note that in a number of cases this class
* exhibits class-specific exemptions from the USB specification.
* Notably the usage of NAK, STALL and ACK differs from the norm, in
* that they are used to communicate wait, failed and OK on commands.
*
* Also, for certain devices, the interrupt endpoint is used to convey
* status of a command.
*
* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
* information about this driver.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _TRANSPORT_H_
#define _TRANSPORT_H_
#include <linux/blkdev.h>
/*
* Bulk only data structures
*/
/* command block wrapper */
struct bulk_cb_wrap {
__le32 Signature; /* contains 'USBC' */
__u32 Tag; /* unique per command id */
__le32 DataTransferLength; /* size of data */
__u8 Flags; /* direction in bit 0 */
__u8 Lun; /* LUN normally 0 */
__u8 Length; /* of of the CDB */
__u8 CDB[16]; /* max command */
};
#define US_BULK_CB_WRAP_LEN 31
#define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */
#define US_BULK_FLAG_IN 1
#define US_BULK_FLAG_OUT 0
/* command status wrapper */
struct bulk_cs_wrap {
__le32 Signature; /* should = 'USBS' */
__u32 Tag; /* same as original command */
__le32 Residue; /* amount not transferred */
__u8 Status; /* see below */
__u8 Filler[18];
};
#define US_BULK_CS_WRAP_LEN 13
#define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */
#define US_BULK_STAT_OK 0
#define US_BULK_STAT_FAIL 1
#define US_BULK_STAT_PHASE 2
/* bulk-only class specific requests */
#define US_BULK_RESET_REQUEST 0xff
#define US_BULK_GET_MAX_LUN 0xfe
/*
* usb_stor_bulk_transfer_xxx() return codes, in order of severity
*/
#define USB_STOR_XFER_GOOD 0 /* good transfer */
#define USB_STOR_XFER_SHORT 1 /* transferred less than expected */
#define USB_STOR_XFER_STALLED 2 /* endpoint stalled */
#define USB_STOR_XFER_LONG 3 /* device tried to send too much */
#define USB_STOR_XFER_ERROR 4 /* transfer died in the middle */
/*
* Transport return codes
*/
#define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */
#define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */
#define USB_STOR_TRANSPORT_NO_SENSE 2 /* Command failed, no auto-sense */
#define USB_STOR_TRANSPORT_ERROR 3 /* Transport bad (i.e. device dead) */
/*
* We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
* return codes. But now the transport and low-level transfer routines
* treat an abort as just another error (-ENOENT for a cancelled URB).
* It is up to the invoke_transport() function to test for aborts and
* distinguish them from genuine communication errors.
*/
/*
* CBI accept device specific command
*/
#define US_CBI_ADSC 0
extern int usb_stor_CBI_transport(struct scsi_cmnd *, struct us_data*);
extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
extern int usb_stor_CB_reset(struct us_data*);
extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*);
extern int usb_stor_Bulk_max_lun(struct us_data*);
extern int usb_stor_Bulk_reset(struct us_data*);
extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*);
extern void usb_stor_stop_transport(struct us_data*);
extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
u8 request, u8 requesttype, u16 value, u16 index,
void *data, u16 size, int timeout);
extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe);
extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
u8 request, u8 requesttype, u16 value, u16 index,
void *data, u16 size);
extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, unsigned int *act_len);
extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
void *buf, unsigned int length, int use_sg, int *residual);
extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
struct scsi_cmnd* srb);
extern int usb_stor_port_reset(struct us_data *us);
#endif