..
accel
iio: accel: bma180: Add ACPI enumeration support for BMA250E
2017-05-21 15:06:17 +01:00
adc
Revert "iio: hi8435: cleanup reset gpio"
2017-06-03 09:55:24 +01:00
amplifiers
spi: Updates for v4.4
2015-11-05 13:15:12 -08:00
buffer
iio:buffer.h - split into buffer.h and buffer_impl.h
2017-01-10 19:54:55 +00:00
chemical
drivers: iio: chemical: replace comma with a semicolon
2017-03-30 19:13:23 +01:00
common
iio: hid-sensor-hub: Implement batch mode
2017-05-16 19:44:01 +01:00
counter
iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option
2017-03-15 21:59:08 +00:00
dac
First set of new device support, features and cleanups for IIO in the 4.13 cycle
2017-05-29 15:53:42 +02:00
dummy
iio:dummy: Stop enabling timestamp by default.
2017-01-10 19:54:55 +00:00
frequency
iio: frequency: ad9523: use unsigned int rather then bare unsigned
2016-04-17 10:31:03 +01:00
gyro
Fourth set of IIO new device support, features and cleanups for the 4.12 cycle
2017-04-18 17:13:31 +02:00
health
First set of IIO new device support, features and cleanup for the 4.12 cycle.
2017-03-06 13:17:21 +01:00
humidity
iio: humidity: hts221: add power management support
2017-05-14 16:52:33 +01:00
imu
iio: imu: st_lsm6dsx: substitute ifdef CONFIG_PM with __maybe_unused macro
2017-05-21 15:07:59 +01:00
light
iio: light: rpr0521 channel numbers reordered
2017-05-21 15:06:15 +01:00
magnetometer
Merge 4.11-rc4 into staging-next
2017-03-27 09:11:25 +02:00
orientation
iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support
2017-05-07 12:22:36 +01:00
potentiometer
iio: max5481: Add support for Maxim digital potentiometers
2017-01-28 12:13:31 +00:00
potentiostat
iio: lmp91000: Set parent device
2017-02-19 12:01:52 +00:00
pressure
iio: pressure: zpa2326: report interrupted case as failure
2017-05-14 15:28:14 +01:00
proximity
iio: proximity: as3935: move storm out of range check
2017-04-27 07:22:46 +01:00
temperature
iio: temperature: maxim_thermocouple: add MAX31856 part
2017-05-07 12:36:41 +01:00
trigger
iio: stm32 trigger: Add support for TRGO2 triggers
2017-05-07 16:08:10 +01:00
iio_core_trigger.h
iio_core.h
iio:core: timestamping clock selection support
2016-06-30 19:41:38 +01:00
industrialio-buffer.c
sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
2017-03-02 08:42:32 +01:00
industrialio-configfs.c
iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem
2015-12-05 16:25:30 +00:00
industrialio-core.c
First set of new device support, features and cleanups for IIO in the 4.13 cycle
2017-05-29 15:53:42 +02:00
industrialio-event.c
iio: iio_push_event(): Don't crash if the event interface is not registered
2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
iio: Add support for creating IIO devices via configfs
2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
iio: core: fix ptr_ret.cocci warnings
2016-01-20 17:09:18 -08:00
industrialio-trigger.c
iio: trigger: clean up viio_trigger_alloc()
2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c
iio: Support triggered events
2015-08-27 20:47:09 +01:00
inkern.c
iio: inkern: fix a static checker error
2017-04-26 06:04:06 +01:00
Kconfig
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
Makefile
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
2016-10-01 17:06:21 +01:00
e18788afeb