linux/arch/arm/mach-lh7a40x/irq-lpd7a40x.c

129 lines
3.2 KiB
C

/* arch/arm/mach-lh7a40x/irq-lpd7a40x.c
*
* Copyright (C) 2004 Coastal Environmental Systems
* Copyright (C) 2004 Logic Product Development
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <mach/irqs.h>
#include "common.h"
static void lh7a40x_ack_cpld_irq(struct irq_data *d)
{
/* CPLD doesn't have ack capability */
}
static void lh7a40x_mask_cpld_irq(struct irq_data *d)
{
switch (d->irq) {
case IRQ_LPD7A40X_ETH_INT:
CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x4;
break;
case IRQ_LPD7A400_TS:
CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x8;
break;
}
}
static void lh7a40x_unmask_cpld_irq(struct irq_data *d)
{
switch (d->irq) {
case IRQ_LPD7A40X_ETH_INT:
CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x4;
break;
case IRQ_LPD7A400_TS:
CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x8;
break;
}
}
static struct irq_chip lh7a40x_cpld_chip = {
.name = "CPLD",
.irq_ack = lh7a40x_ack_cpld_irq,
.irq_mask = lh7a40x_mask_cpld_irq,
.irq_unmask = lh7a40x_unmask_cpld_irq,
};
static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
{
unsigned int mask = CPLD_INTERRUPTS;
desc->irq_data.chip->ack (irq);
if ((mask & 0x1) == 0) /* WLAN */
generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
if ((mask & 0x2) == 0) /* Touch */
generic_handle_irq(IRQ_LPD7A400_TS);
desc->irq_data.chip->unmask (irq); /* Level-triggered need this */
}
/* IRQ initialization */
void __init lh7a40x_init_board_irq (void)
{
int irq;
/* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs.
PF7 supports the CPLD.
Rev B (v3.4): PF0, PF1, and PF2 are available IRQs.
PF3 supports the CPLD.
(Some) LPD7A404 prerelease boards report a version
number of 0x16, but we force an override since the
hardware is of the newer variety.
*/
unsigned char cpld_version = CPLD_REVISION;
int pinCPLD;
#if defined CONFIG_MACH_LPD7A404
cpld_version = 0x34; /* Override, for now */
#endif
pinCPLD = (cpld_version == 0x28) ? 7 : 3;
/* First, configure user controlled GPIOF interrupts */
GPIO_PFDD &= ~0x0f; /* PF0-3 are inputs */
GPIO_INTTYPE1 &= ~0x0f; /* PF0-3 are level triggered */
GPIO_INTTYPE2 &= ~0x0f; /* PF0-3 are active low */
barrier ();
GPIO_GPIOFINTEN |= 0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */
/* Then, configure CPLD interrupt */
CPLD_INTERRUPTS = 0x0c; /* Disable all CPLD interrupts */
GPIO_PFDD &= ~(1 << pinCPLD); /* Make input */
GPIO_INTTYPE1 |= (1 << pinCPLD); /* Edge triggered */
GPIO_INTTYPE2 &= ~(1 << pinCPLD); /* Active low */
barrier ();
GPIO_GPIOFINTEN |= (1 << pinCPLD); /* Enable */
/* Cascade CPLD interrupts */
for (irq = IRQ_BOARD_START;
irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
set_irq_chip (irq, &lh7a40x_cpld_chip);
set_irq_handler (irq, handle_edge_irq);
set_irq_flags (irq, IRQF_VALID);
}
set_irq_chained_handler ((cpld_version == 0x28)
? IRQ_CPLD_V28
: IRQ_CPLD_V34,
lh7a40x_cpld_handler);
}