OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/drivers/hwmon/sis5595.c

867 lines
25 KiB
C
Raw Blame History

/*
sis5595.c - Part of lm_sensors, Linux kernel modules
for hardware monitoring
Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
Kyösti Mälkki <kmalkki@cc.hut.fi>, and
Mark D. Studebaker <mdsxyz123@yahoo.com>
Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
the help of Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
SiS southbridge has a LM78-like chip integrated on the same IC.
This driver is a customized copy of lm78.c
Supports following revisions:
Version PCI ID PCI Revision
1 1039/0008 AF or less
2 1039/0008 B0 or greater
Note: these chips contain a 0008 device which is incompatible with the
5595. We recognize these by the presence of the listed
"blacklist" PCI ID and refuse to load.
NOT SUPPORTED PCI ID BLACKLIST PCI ID
540 0008 0540
550 0008 0550
5513 0008 5511
5581 0008 5597
5582 0008 5597
5597 0008 5597
5598 0008 5597/5598
630 0008 0630
645 0008 0645
730 0008 0730
735 0008 0735
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <asm/io.h>
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
static u16 force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
static struct platform_device *pdev;
/* Many SIS5595 constants specified below */
/* Length of ISA address segment */
#define SIS5595_EXTENT 8
/* PCI Config Registers */
#define SIS5595_BASE_REG 0x68
#define SIS5595_PIN_REG 0x7A
#define SIS5595_ENABLE_REG 0x7B
/* Where are the ISA address/data registers relative to the base address */
#define SIS5595_ADDR_REG_OFFSET 5
#define SIS5595_DATA_REG_OFFSET 6
/* The SIS5595 registers */
#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2)
#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2)
#define SIS5595_REG_IN(nr) (0x20 + (nr))
#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr))
#define SIS5595_REG_FAN(nr) (0x28 + (nr))
/* On the first version of the chip, the temp registers are separate.
On the second version,
TEMP pin is shared with IN4, configured in PCI register 0x7A.
The registers are the same as well.
OVER and HYST are really MAX and MIN. */
#define REV2MIN 0xb0
#define SIS5595_REG_TEMP (( data->revision) >= REV2MIN) ? \
SIS5595_REG_IN(4) : 0x27
#define SIS5595_REG_TEMP_OVER (( data->revision) >= REV2MIN) ? \
SIS5595_REG_IN_MAX(4) : 0x39
#define SIS5595_REG_TEMP_HYST (( data->revision) >= REV2MIN) ? \
SIS5595_REG_IN_MIN(4) : 0x3a
#define SIS5595_REG_CONFIG 0x40
#define SIS5595_REG_ALARM1 0x41
#define SIS5595_REG_ALARM2 0x42
#define SIS5595_REG_FANDIV 0x47
/* Conversions. Limit checking is only done on the TO_REG
variants. */
/* IN: mV, (0V to 4.08V)
REG: 16mV/bit */
static inline u8 IN_TO_REG(unsigned long val)
{
unsigned long nval = SENSORS_LIMIT(val, 0, 4080);
return (nval + 8) / 16;
}
#define IN_FROM_REG(val) ((val) * 16)
static inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm <= 0)
return 255;
return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static inline int FAN_FROM_REG(u8 val, int div)
{
return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
}
/* TEMP: mC (-54.12C to +157.53C)
REG: 0.83C/bit + 52.12, two's complement */
static inline int TEMP_FROM_REG(s8 val)
{
return val * 830 + 52120;
}
static inline s8 TEMP_TO_REG(int val)
{
int nval = SENSORS_LIMIT(val, -54120, 157530) ;
return nval<0 ? (nval-5212-415)/830 : (nval-5212+415)/830;
}
/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
static inline u8 DIV_TO_REG(int val)
{
return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
}
#define DIV_FROM_REG(val) (1 << (val))
/* For each registered chip, we need to keep some data in memory.
The structure is dynamically allocated. */
struct sis5595_data {
unsigned short addr;
const char *name;
struct device *hwmon_dev;
struct mutex lock;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
char maxins; /* == 3 if temp enabled, otherwise == 4 */
u8 revision; /* Reg. value */
u8 in[5]; /* Register value */
u8 in_max[5]; /* Register value */
u8 in_min[5]; /* Register value */
u8 fan[2]; /* Register value */
u8 fan_min[2]; /* Register value */
s8 temp; /* Register value */
s8 temp_over; /* Register value */
s8 temp_hyst; /* Register value */
u8 fan_div[2]; /* Register encoding, shifted right */
u16 alarms; /* Register encoding, combined */
};
static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */
static int sis5595_probe(struct platform_device *pdev);
static int __devexit sis5595_remove(struct platform_device *pdev);
static int sis5595_read_value(struct sis5595_data *data, u8 reg);
static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value);
static struct sis5595_data *sis5595_update_device(struct device *dev);
static void sis5595_init_device(struct sis5595_data *data);
static struct platform_driver sis5595_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "sis5595",
},
.probe = sis5595_probe,
.remove = __devexit_p(sis5595_remove),
};
/* 4 Voltages */
static ssize_t show_in(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr]));
}
static ssize_t show_in_min(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr]));
}
static ssize_t show_in_max(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr]));
}
static ssize_t set_in_min(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
struct sis5595_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
sis5595_write_value(data, SIS5595_REG_IN_MIN(nr), data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_in_max(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
struct sis5595_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
sis5595_write_value(data, SIS5595_REG_IN_MAX(nr), data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define show_in_offset(offset) \
static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
show_in, NULL, offset); \
static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
show_in_min, set_in_min, offset); \
static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
show_in_max, set_in_max, offset);
show_in_offset(0);
show_in_offset(1);
show_in_offset(2);
show_in_offset(3);
show_in_offset(4);
/* Temperature */
static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
}
static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
}
static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct sis5595_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_over = TEMP_TO_REG(val);
sis5595_write_value(data, SIS5595_REG_TEMP_OVER, data->temp_over);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst));
}
static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct sis5595_data *data = dev_get_drvdata(dev);
long val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_hyst = TEMP_TO_REG(val);
sis5595_write_value(data, SIS5595_REG_TEMP_HYST, data->temp_hyst);
mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
show_temp_over, set_temp_over);
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
show_temp_hyst, set_temp_hyst);
/* 2 Fans */
static ssize_t show_fan(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
DIV_FROM_REG(data->fan_div[nr])) );
}
static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr])) );
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
struct sis5595_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_fan_div(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
}
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
const char *buf, size_t count)
{
struct sis5595_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int nr = attr->index;
unsigned long min;
unsigned long val = simple_strtoul(buf, NULL, 10);
int reg;
mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
reg = sis5595_read_value(data, SIS5595_REG_FANDIV);
switch (val) {
case 1: data->fan_div[nr] = 0; break;
case 2: data->fan_div[nr] = 1; break;
case 4: data->fan_div[nr] = 2; break;
case 8: data->fan_div[nr] = 3; break;
default:
dev_err(dev, "fan_div value %ld not "
"supported. Choose one of 1, 2, 4 or 8!\n", val);
mutex_unlock(&data->update_lock);
return -EINVAL;
}
switch (nr) {
case 0:
reg = (reg & 0xcf) | (data->fan_div[nr] << 4);
break;
case 1:
reg = (reg & 0x3f) | (data->fan_div[nr] << 6);
break;
}
sis5595_write_value(data, SIS5595_REG_FANDIV, reg);
data->fan_min[nr] =
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
sis5595_write_value(data, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define show_fan_offset(offset) \
static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
show_fan, NULL, offset - 1); \
static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
show_fan_min, set_fan_min, offset - 1); \
static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
show_fan_div, set_fan_div, offset - 1);
show_fan_offset(1);
show_fan_offset(2);
/* Alarms */
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
return sprintf(buf, "%d\n", data->alarms);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sis5595_data *data = sis5595_update_device(dev);
int nr = to_sensor_dev_attr(da)->index;
return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
}
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 15);
static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 15);
static ssize_t show_name(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sis5595_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", data->name);
}
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static struct attribute *sis5595_attributes[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
&sensor_dev_attr_in0_alarm.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
&sensor_dev_attr_in1_alarm.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in2_min.dev_attr.attr,
&sensor_dev_attr_in2_max.dev_attr.attr,
&sensor_dev_attr_in2_alarm.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
&sensor_dev_attr_in3_alarm.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_div.dev_attr.attr,
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_div.dev_attr.attr,
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
&dev_attr_alarms.attr,
&dev_attr_name.attr,
NULL
};
static const struct attribute_group sis5595_group = {
.attrs = sis5595_attributes,
};
static struct attribute *sis5595_attributes_in4[] = {
&sensor_dev_attr_in4_input.dev_attr.attr,
&sensor_dev_attr_in4_min.dev_attr.attr,
&sensor_dev_attr_in4_max.dev_attr.attr,
&sensor_dev_attr_in4_alarm.dev_attr.attr,
NULL
};
static const struct attribute_group sis5595_group_in4 = {
.attrs = sis5595_attributes_in4,
};
static struct attribute *sis5595_attributes_temp1[] = {
&dev_attr_temp1_input.attr,
&dev_attr_temp1_max.attr,
&dev_attr_temp1_max_hyst.attr,
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
NULL
};
static const struct attribute_group sis5595_group_temp1 = {
.attrs = sis5595_attributes_temp1,
};
/* This is called when the module is loaded */
static int __devinit sis5595_probe(struct platform_device *pdev)
{
int err = 0;
int i;
struct sis5595_data *data;
struct resource *res;
char val;
/* Reserve the ISA region */
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!request_region(res->start, SIS5595_EXTENT,
sis5595_driver.driver.name)) {
err = -EBUSY;
goto exit;
}
if (!(data = kzalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
mutex_init(&data->lock);
mutex_init(&data->update_lock);
data->addr = res->start;
data->name = "sis5595";
platform_set_drvdata(pdev, data);
/* Check revision and pin registers to determine whether 4 or 5 voltages */
data->revision = s_bridge->revision;
/* 4 voltages, 1 temp */
data->maxins = 3;
if (data->revision >= REV2MIN) {
pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val);
if (!(val & 0x80))
/* 5 voltages, no temps */
data->maxins = 4;
}
/* Initialize the SIS5595 chip */
sis5595_init_device(data);
/* A few vars need to be filled upon startup */
for (i = 0; i < 2; i++) {
data->fan_min[i] = sis5595_read_value(data,
SIS5595_REG_FAN_MIN(i));
}
/* Register sysfs hooks */
if ((err = sysfs_create_group(&pdev->dev.kobj, &sis5595_group)))
goto exit_free;
if (data->maxins == 4) {
if ((err = sysfs_create_group(&pdev->dev.kobj,
&sis5595_group_in4)))
goto exit_remove_files;
} else {
if ((err = sysfs_create_group(&pdev->dev.kobj,
&sis5595_group_temp1)))
goto exit_remove_files;
}
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
return 0;
exit_remove_files:
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
exit_free:
kfree(data);
exit_release:
release_region(res->start, SIS5595_EXTENT);
exit:
return err;
}
static int __devexit sis5595_remove(struct platform_device *pdev)
{
struct sis5595_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group);
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_in4);
sysfs_remove_group(&pdev->dev.kobj, &sis5595_group_temp1);
release_region(data->addr, SIS5595_EXTENT);
platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
}
/* ISA access must be locked explicitly. */
static int sis5595_read_value(struct sis5595_data *data, u8 reg)
{
int res;
mutex_lock(&data->lock);
outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
res = inb_p(data->addr + SIS5595_DATA_REG_OFFSET);
mutex_unlock(&data->lock);
return res;
}
static void sis5595_write_value(struct sis5595_data *data, u8 reg, u8 value)
{
mutex_lock(&data->lock);
outb_p(reg, data->addr + SIS5595_ADDR_REG_OFFSET);
outb_p(value, data->addr + SIS5595_DATA_REG_OFFSET);
mutex_unlock(&data->lock);
}
/* Called when we have found a new SIS5595. */
static void __devinit sis5595_init_device(struct sis5595_data *data)
{
u8 config = sis5595_read_value(data, SIS5595_REG_CONFIG);
if (!(config & 0x01))
sis5595_write_value(data, SIS5595_REG_CONFIG,
(config & 0xf7) | 0x01);
}
static struct sis5595_data *sis5595_update_device(struct device *dev)
{
struct sis5595_data *data = dev_get_drvdata(dev);
int i;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
for (i = 0; i <= data->maxins; i++) {
data->in[i] =
sis5595_read_value(data, SIS5595_REG_IN(i));
data->in_min[i] =
sis5595_read_value(data,
SIS5595_REG_IN_MIN(i));
data->in_max[i] =
sis5595_read_value(data,
SIS5595_REG_IN_MAX(i));
}
for (i = 0; i < 2; i++) {
data->fan[i] =
sis5595_read_value(data, SIS5595_REG_FAN(i));
data->fan_min[i] =
sis5595_read_value(data,
SIS5595_REG_FAN_MIN(i));
}
if (data->maxins == 3) {
data->temp =
sis5595_read_value(data, SIS5595_REG_TEMP);
data->temp_over =
sis5595_read_value(data, SIS5595_REG_TEMP_OVER);
data->temp_hyst =
sis5595_read_value(data, SIS5595_REG_TEMP_HYST);
}
i = sis5595_read_value(data, SIS5595_REG_FANDIV);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = i >> 6;
data->alarms =
sis5595_read_value(data, SIS5595_REG_ALARM1) |
(sis5595_read_value(data, SIS5595_REG_ALARM2) << 8);
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
static struct pci_device_id sis5595_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, sis5595_pci_ids);
static int blacklist[] __devinitdata = {
PCI_DEVICE_ID_SI_540,
PCI_DEVICE_ID_SI_550,
PCI_DEVICE_ID_SI_630,
PCI_DEVICE_ID_SI_645,
PCI_DEVICE_ID_SI_730,
PCI_DEVICE_ID_SI_735,
PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but
that ID shows up in other chips so we
use the 5511 ID for recognition */
PCI_DEVICE_ID_SI_5597,
PCI_DEVICE_ID_SI_5598,
0 };
static int __devinit sis5595_device_add(unsigned short address)
{
struct resource res = {
.start = address,
.end = address + SIS5595_EXTENT - 1,
.name = "sis5595",
.flags = IORESOURCE_IO,
};
int err;
pdev = platform_device_alloc("sis5595", address);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR "sis5595: Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
printk(KERN_ERR "sis5595: Device resource addition failed "
"(%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR "sis5595: Device addition failed (%d)\n",
err);
goto exit_device_put;
}
return 0;
exit_device_put:
platform_device_put(pdev);
exit:
return err;
}
static int __devinit sis5595_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
u16 address;
u8 enable;
int *i;
for (i = blacklist; *i != 0; i++) {
struct pci_dev *d;
if ((d = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL))) {
dev_err(&d->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i);
pci_dev_put(d);
return -ENODEV;
}
}
force_addr &= ~(SIS5595_EXTENT - 1);
if (force_addr) {
dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", force_addr);
pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
}
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {
dev_err(&dev->dev, "Failed to read ISA address\n");
return -ENODEV;
}
address &= ~(SIS5595_EXTENT - 1);
if (!address) {
dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
if (force_addr && address != force_addr) {
/* doesn't work for some chips? */
dev_err(&dev->dev, "Failed to force ISA address\n");
return -ENODEV;
}
if (PCIBIOS_SUCCESSFUL !=
pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
dev_err(&dev->dev, "Failed to read enable register\n");
return -ENODEV;
}
if (!(enable & 0x80)) {
if ((PCIBIOS_SUCCESSFUL !=
pci_write_config_byte(dev, SIS5595_ENABLE_REG,
enable | 0x80))
|| (PCIBIOS_SUCCESSFUL !=
pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
|| (!(enable & 0x80))) {
/* doesn't work for some chips! */
dev_err(&dev->dev, "Failed to enable HWM device\n");
return -ENODEV;
}
}
if (platform_driver_register(&sis5595_driver)) {
dev_dbg(&dev->dev, "Failed to register sis5595 driver\n");
goto exit;
}
s_bridge = pci_dev_get(dev);
/* Sets global pdev as a side effect */
if (sis5595_device_add(address))
goto exit_unregister;
/* Always return failure here. This is to allow other drivers to bind
* to this pci device. We don't really want to have control over the
* pci device, we only wanted to read as few register values from it.
*/
return -ENODEV;
exit_unregister:
pci_dev_put(dev);
platform_driver_unregister(&sis5595_driver);
exit:
return -ENODEV;
}
static struct pci_driver sis5595_pci_driver = {
.name = "sis5595",
.id_table = sis5595_pci_ids,
.probe = sis5595_pci_probe,
};
static int __init sm_sis5595_init(void)
{
return pci_register_driver(&sis5595_pci_driver);
}
static void __exit sm_sis5595_exit(void)
{
pci_unregister_driver(&sis5595_pci_driver);
if (s_bridge != NULL) {
platform_device_unregister(pdev);
platform_driver_unregister(&sis5595_driver);
pci_dev_put(s_bridge);
s_bridge = NULL;
}
}
MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
MODULE_DESCRIPTION("SiS 5595 Sensor device");
MODULE_LICENSE("GPL");
module_init(sm_sis5595_init);
module_exit(sm_sis5595_exit);
Reference in New Issue View Git Blame Copy Permalink