786 lines
21 KiB
C
786 lines
21 KiB
C
/*
|
|
* sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
|
|
*
|
|
* Copyright 2005 Tejun Heo
|
|
*
|
|
* Based on preview driver from Silicon Image.
|
|
*
|
|
* NOTE: No NCQ/ATAPI support yet. The preview driver didn't support
|
|
* NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
|
|
* those work. Enabling those shouldn't be difficult. Basic
|
|
* structure is all there (in libata-dev tree). If you have any
|
|
* information about this hardware, please contact me or linux-ide.
|
|
* Info is needed on...
|
|
*
|
|
* - How to issue tagged commands and turn on sactive on issue accordingly.
|
|
* - Where to put an ATAPI command and how to tell the device to send it.
|
|
* - How to enable/use 64bit.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include "scsi.h"
|
|
#include <linux/libata.h>
|
|
#include <asm/io.h>
|
|
|
|
#define DRV_NAME "sata_sil24"
|
|
#define DRV_VERSION "0.20" /* Silicon Image's preview driver was 0.10 */
|
|
|
|
#define NR_PORTS 4
|
|
|
|
/*
|
|
* Port request block (PRB) 32 bytes
|
|
*/
|
|
struct sil24_prb {
|
|
u16 ctrl;
|
|
u16 prot;
|
|
u32 rx_cnt;
|
|
u8 fis[6 * 4];
|
|
};
|
|
|
|
/*
|
|
* Scatter gather entry (SGE) 16 bytes
|
|
*/
|
|
struct sil24_sge {
|
|
u64 addr;
|
|
u32 cnt;
|
|
u32 flags;
|
|
};
|
|
|
|
/*
|
|
* Port multiplier
|
|
*/
|
|
struct sil24_port_multiplier {
|
|
u32 diag;
|
|
u32 sactive;
|
|
};
|
|
|
|
enum {
|
|
/*
|
|
* Global controller registers (128 bytes @ BAR0)
|
|
*/
|
|
/* 32 bit regs */
|
|
HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
|
|
HOST_CTRL = 0x40,
|
|
HOST_IRQ_STAT = 0x44,
|
|
HOST_PHY_CFG = 0x48,
|
|
HOST_BIST_CTRL = 0x50,
|
|
HOST_BIST_PTRN = 0x54,
|
|
HOST_BIST_STAT = 0x58,
|
|
HOST_MEM_BIST_STAT = 0x5c,
|
|
HOST_FLASH_CMD = 0x70,
|
|
/* 8 bit regs */
|
|
HOST_FLASH_DATA = 0x74,
|
|
HOST_TRANSITION_DETECT = 0x75,
|
|
HOST_GPIO_CTRL = 0x76,
|
|
HOST_I2C_ADDR = 0x78, /* 32 bit */
|
|
HOST_I2C_DATA = 0x7c,
|
|
HOST_I2C_XFER_CNT = 0x7e,
|
|
HOST_I2C_CTRL = 0x7f,
|
|
|
|
/* HOST_SLOT_STAT bits */
|
|
HOST_SSTAT_ATTN = (1 << 31),
|
|
|
|
/*
|
|
* Port registers
|
|
* (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
|
|
*/
|
|
PORT_REGS_SIZE = 0x2000,
|
|
PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */
|
|
|
|
PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
|
|
/* 32 bit regs */
|
|
PORT_CTRL_STAT = 0x1000, /* write:ctrl, read:stat */
|
|
PORT_CTRL_CLR = 0x1004,
|
|
PORT_IRQ_STAT = 0x1008,
|
|
PORT_IRQ_ENABLE_SET = 0x1010,
|
|
PORT_IRQ_ENABLE_CLR = 0x1014,
|
|
PORT_ACTIVATE_UPPER_ADDR= 0x101c,
|
|
PORT_EXEC_FIFO = 0x1020,
|
|
PORT_CMD_ERR = 0x1024,
|
|
PORT_FIS_CFG = 0x1028,
|
|
PORT_FIFO_THRES = 0x102c,
|
|
/* 16 bit regs */
|
|
PORT_DECODE_ERR_CNT = 0x1040,
|
|
PORT_DECODE_ERR_THRESH = 0x1042,
|
|
PORT_CRC_ERR_CNT = 0x1044,
|
|
PORT_CRC_ERR_THRESH = 0x1046,
|
|
PORT_HSHK_ERR_CNT = 0x1048,
|
|
PORT_HSHK_ERR_THRESH = 0x104a,
|
|
/* 32 bit regs */
|
|
PORT_PHY_CFG = 0x1050,
|
|
PORT_SLOT_STAT = 0x1800,
|
|
PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
|
|
PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
|
|
PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
|
|
PORT_SCONTROL = 0x1f00,
|
|
PORT_SSTATUS = 0x1f04,
|
|
PORT_SERROR = 0x1f08,
|
|
PORT_SACTIVE = 0x1f0c,
|
|
|
|
/* PORT_CTRL_STAT bits */
|
|
PORT_CS_PORT_RST = (1 << 0), /* port reset */
|
|
PORT_CS_DEV_RST = (1 << 1), /* device reset */
|
|
PORT_CS_INIT = (1 << 2), /* port initialize */
|
|
PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
|
|
PORT_CS_RESUME = (1 << 6), /* port resume */
|
|
PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
|
|
PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
|
|
PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
|
|
|
|
/* PORT_IRQ_STAT/ENABLE_SET/CLR */
|
|
/* bits[11:0] are masked */
|
|
PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
|
|
PORT_IRQ_ERROR = (1 << 1), /* command execution error */
|
|
PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
|
|
PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
|
|
PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
|
|
PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
|
|
PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */
|
|
PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */
|
|
|
|
/* bits[27:16] are unmasked (raw) */
|
|
PORT_IRQ_RAW_SHIFT = 16,
|
|
PORT_IRQ_MASKED_MASK = 0x7ff,
|
|
PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
|
|
|
|
/* ENABLE_SET/CLR specific, intr steering - 2 bit field */
|
|
PORT_IRQ_STEER_SHIFT = 30,
|
|
PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
|
|
|
|
/* PORT_CMD_ERR constants */
|
|
PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
|
|
PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
|
|
PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
|
|
PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
|
|
PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
|
|
PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
|
|
PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
|
|
PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
|
|
PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
|
|
PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
|
|
PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
|
|
PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
|
|
PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
|
|
PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
|
|
PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
|
|
PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
|
|
PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
|
|
PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
|
|
PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
|
|
PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */
|
|
PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
|
|
PORT_CERR_SENDSERVICE = 36, /* FIS received whiel sending service */
|
|
|
|
/*
|
|
* Other constants
|
|
*/
|
|
SGE_TRM = (1 << 31), /* Last SGE in chain */
|
|
PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */
|
|
|
|
/* board id */
|
|
BID_SIL3124 = 0,
|
|
BID_SIL3132 = 1,
|
|
|
|
IRQ_STAT_4PORTS = 0xf,
|
|
};
|
|
|
|
struct sil24_cmd_block {
|
|
struct sil24_prb prb;
|
|
struct sil24_sge sge[LIBATA_MAX_PRD];
|
|
};
|
|
|
|
/*
|
|
* ap->private_data
|
|
*
|
|
* The preview driver always returned 0 for status. We emulate it
|
|
* here from the previous interrupt.
|
|
*/
|
|
struct sil24_port_priv {
|
|
struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */
|
|
dma_addr_t cmd_block_dma; /* DMA base addr for them */
|
|
};
|
|
|
|
/* ap->host_set->private_data */
|
|
struct sil24_host_priv {
|
|
void *host_base; /* global controller control (128 bytes @BAR0) */
|
|
void *port_base; /* port registers (4 * 8192 bytes @BAR2) */
|
|
};
|
|
|
|
static u8 sil24_check_status(struct ata_port *ap);
|
|
static u8 sil24_check_err(struct ata_port *ap);
|
|
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
|
|
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
|
|
static void sil24_phy_reset(struct ata_port *ap);
|
|
static void sil24_qc_prep(struct ata_queued_cmd *qc);
|
|
static int sil24_qc_issue(struct ata_queued_cmd *qc);
|
|
static void sil24_irq_clear(struct ata_port *ap);
|
|
static void sil24_eng_timeout(struct ata_port *ap);
|
|
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
|
|
static int sil24_port_start(struct ata_port *ap);
|
|
static void sil24_port_stop(struct ata_port *ap);
|
|
static void sil24_host_stop(struct ata_host_set *host_set);
|
|
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
|
|
static struct pci_device_id sil24_pci_tbl[] = {
|
|
{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
|
|
{ 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
|
|
};
|
|
|
|
static struct pci_driver sil24_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sil24_pci_tbl,
|
|
.probe = sil24_init_one,
|
|
.remove = ata_pci_remove_one, /* safe? */
|
|
};
|
|
|
|
static Scsi_Host_Template sil24_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.max_sectors = ATA_MAX_SECTORS,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.bios_param = ata_std_bios_param,
|
|
.ordered_flush = 1, /* NCQ not supported yet */
|
|
};
|
|
|
|
static struct ata_port_operations sil24_ops = {
|
|
.port_disable = ata_port_disable,
|
|
|
|
.check_status = sil24_check_status,
|
|
.check_altstatus = sil24_check_status,
|
|
.check_err = sil24_check_err,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.phy_reset = sil24_phy_reset,
|
|
|
|
.qc_prep = sil24_qc_prep,
|
|
.qc_issue = sil24_qc_issue,
|
|
|
|
.eng_timeout = sil24_eng_timeout,
|
|
|
|
.irq_handler = sil24_interrupt,
|
|
.irq_clear = sil24_irq_clear,
|
|
|
|
.scr_read = sil24_scr_read,
|
|
.scr_write = sil24_scr_write,
|
|
|
|
.port_start = sil24_port_start,
|
|
.port_stop = sil24_port_stop,
|
|
.host_stop = sil24_host_stop,
|
|
};
|
|
|
|
static struct ata_port_info sil24_port_info[] = {
|
|
/* sil_3124 */
|
|
{
|
|
.sht = &sil24_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
|
|
ATA_FLAG_PIO_DMA,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &sil24_ops,
|
|
},
|
|
/* sil_3132 */
|
|
{
|
|
.sht = &sil24_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
|
|
ATA_FLAG_PIO_DMA,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &sil24_ops,
|
|
},
|
|
};
|
|
|
|
static u8 sil24_check_status(struct ata_port *ap)
|
|
{
|
|
return ATA_DRDY;
|
|
}
|
|
|
|
static u8 sil24_check_err(struct ata_port *ap)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int sil24_scr_map[] = {
|
|
[SCR_CONTROL] = 0,
|
|
[SCR_STATUS] = 1,
|
|
[SCR_ERROR] = 2,
|
|
[SCR_ACTIVE] = 3,
|
|
};
|
|
|
|
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
|
|
{
|
|
void *scr_addr = (void *)ap->ioaddr.scr_addr;
|
|
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
|
|
void *addr;
|
|
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
|
|
return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
|
|
}
|
|
return 0xffffffffU;
|
|
}
|
|
|
|
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
|
|
{
|
|
void *scr_addr = (void *)ap->ioaddr.scr_addr;
|
|
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
|
|
void *addr;
|
|
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
|
|
writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
|
|
}
|
|
}
|
|
|
|
static void sil24_phy_reset(struct ata_port *ap)
|
|
{
|
|
__sata_phy_reset(ap);
|
|
/*
|
|
* No ATAPI yet. Just unconditionally indicate ATA device.
|
|
* If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
|
|
* and libata core will ignore the device.
|
|
*/
|
|
if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
|
|
ap->device[0].class = ATA_DEV_ATA;
|
|
}
|
|
|
|
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
|
|
struct sil24_cmd_block *cb)
|
|
{
|
|
struct scatterlist *sg = qc->sg;
|
|
struct sil24_sge *sge = cb->sge;
|
|
unsigned i;
|
|
|
|
for (i = 0; i < qc->n_elem; i++, sg++, sge++) {
|
|
sge->addr = cpu_to_le64(sg_dma_address(sg));
|
|
sge->cnt = cpu_to_le32(sg_dma_len(sg));
|
|
sge->flags = 0;
|
|
sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM);
|
|
}
|
|
}
|
|
|
|
static void sil24_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
|
|
struct sil24_prb *prb = &cb->prb;
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_PIO:
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
break;
|
|
default:
|
|
/* ATAPI isn't supported yet */
|
|
BUG();
|
|
}
|
|
|
|
ata_tf_to_fis(&qc->tf, prb->fis, 0);
|
|
|
|
if (qc->flags & ATA_QCFLAG_DMAMAP)
|
|
sil24_fill_sg(qc, cb);
|
|
}
|
|
|
|
static int sil24_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void *port = (void *)ap->ioaddr.cmd_addr;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block);
|
|
|
|
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
|
|
return 0;
|
|
}
|
|
|
|
static void sil24_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* unused */
|
|
}
|
|
|
|
static void sil24_reset_controller(struct ata_port *ap)
|
|
{
|
|
void *port = (void *)ap->ioaddr.cmd_addr;
|
|
int cnt;
|
|
u32 tmp;
|
|
|
|
printk(KERN_NOTICE DRV_NAME
|
|
" ata%u: resetting controller...\n", ap->id);
|
|
|
|
/* Reset controller state. Is this correct? */
|
|
writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
|
|
readl(port + PORT_CTRL_STAT); /* sync */
|
|
|
|
/* Max ~100ms */
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
udelay(100);
|
|
tmp = readl(port + PORT_CTRL_STAT);
|
|
if (!(tmp & PORT_CS_DEV_RST))
|
|
break;
|
|
}
|
|
if (tmp & PORT_CS_DEV_RST)
|
|
printk(KERN_ERR DRV_NAME
|
|
" ata%u: failed to reset controller\n", ap->id);
|
|
}
|
|
|
|
static void sil24_eng_timeout(struct ata_port *ap)
|
|
{
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (!qc) {
|
|
printk(KERN_ERR "ata%u: BUG: tiemout without command\n",
|
|
ap->id);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* hack alert! We cannot use the supplied completion
|
|
* function from inside the ->eh_strategy_handler() thread.
|
|
* libata is the only user of ->eh_strategy_handler() in
|
|
* any kernel, so the default scsi_done() assumes it is
|
|
* not being called from the SCSI EH.
|
|
*/
|
|
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
|
|
qc->scsidone = scsi_finish_command;
|
|
ata_qc_complete(qc, ATA_ERR);
|
|
|
|
sil24_reset_controller(ap);
|
|
}
|
|
|
|
static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
|
|
{
|
|
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
void *port = (void *)ap->ioaddr.cmd_addr;
|
|
u32 irq_stat, cmd_err, sstatus, serror;
|
|
|
|
irq_stat = readl(port + PORT_IRQ_STAT);
|
|
cmd_err = readl(port + PORT_CMD_ERR);
|
|
sstatus = readl(port + PORT_SSTATUS);
|
|
serror = readl(port + PORT_SERROR);
|
|
|
|
/* Clear IRQ/errors */
|
|
writel(irq_stat, port + PORT_IRQ_STAT);
|
|
if (cmd_err)
|
|
writel(cmd_err, port + PORT_CMD_ERR);
|
|
if (serror)
|
|
writel(serror, port + PORT_SERROR);
|
|
|
|
printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
|
|
" stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
|
|
ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
|
|
|
|
if (qc)
|
|
ata_qc_complete(qc, ATA_ERR);
|
|
|
|
sil24_reset_controller(ap);
|
|
}
|
|
|
|
static inline void sil24_host_intr(struct ata_port *ap)
|
|
{
|
|
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
void *port = (void *)ap->ioaddr.cmd_addr;
|
|
u32 slot_stat;
|
|
|
|
slot_stat = readl(port + PORT_SLOT_STAT);
|
|
if (!(slot_stat & HOST_SSTAT_ATTN)) {
|
|
if (qc)
|
|
ata_qc_complete(qc, 0);
|
|
} else
|
|
sil24_error_intr(ap, slot_stat);
|
|
}
|
|
|
|
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
|
|
{
|
|
struct ata_host_set *host_set = dev_instance;
|
|
struct sil24_host_priv *hpriv = host_set->private_data;
|
|
unsigned handled = 0;
|
|
u32 status;
|
|
int i;
|
|
|
|
status = readl(hpriv->host_base + HOST_IRQ_STAT);
|
|
|
|
if (status == 0xffffffff) {
|
|
printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
|
|
"PCI fault or device removal?\n");
|
|
goto out;
|
|
}
|
|
|
|
if (!(status & IRQ_STAT_4PORTS))
|
|
goto out;
|
|
|
|
spin_lock(&host_set->lock);
|
|
|
|
for (i = 0; i < host_set->n_ports; i++)
|
|
if (status & (1 << i)) {
|
|
struct ata_port *ap = host_set->ports[i];
|
|
if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) {
|
|
sil24_host_intr(host_set->ports[i]);
|
|
handled++;
|
|
} else
|
|
printk(KERN_ERR DRV_NAME
|
|
": interrupt from disabled port %d\n", i);
|
|
}
|
|
|
|
spin_unlock(&host_set->lock);
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static int sil24_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct sil24_port_priv *pp;
|
|
struct sil24_cmd_block *cb;
|
|
size_t cb_size = sizeof(*cb);
|
|
dma_addr_t cb_dma;
|
|
|
|
pp = kmalloc(sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
memset(pp, 0, sizeof(*pp));
|
|
|
|
cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
|
|
if (!cb) {
|
|
kfree(pp);
|
|
return -ENOMEM;
|
|
}
|
|
memset(cb, 0, cb_size);
|
|
|
|
pp->cmd_block = cb;
|
|
pp->cmd_block_dma = cb_dma;
|
|
|
|
ap->private_data = pp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sil24_port_stop(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
size_t cb_size = sizeof(*pp->cmd_block);
|
|
|
|
dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
|
|
kfree(pp);
|
|
}
|
|
|
|
static void sil24_host_stop(struct ata_host_set *host_set)
|
|
{
|
|
struct sil24_host_priv *hpriv = host_set->private_data;
|
|
|
|
iounmap(hpriv->host_base);
|
|
iounmap(hpriv->port_base);
|
|
kfree(hpriv);
|
|
}
|
|
|
|
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version = 0;
|
|
unsigned int board_id = (unsigned int)ent->driver_data;
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
struct sil24_host_priv *hpriv = NULL;
|
|
void *host_base = NULL, *port_base = NULL;
|
|
int i, rc;
|
|
|
|
if (!printed_version++)
|
|
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc)
|
|
goto out_disable;
|
|
|
|
rc = -ENOMEM;
|
|
/* ioremap mmio registers */
|
|
host_base = ioremap(pci_resource_start(pdev, 0),
|
|
pci_resource_len(pdev, 0));
|
|
if (!host_base)
|
|
goto out_free;
|
|
port_base = ioremap(pci_resource_start(pdev, 2),
|
|
pci_resource_len(pdev, 2));
|
|
if (!port_base)
|
|
goto out_free;
|
|
|
|
/* allocate & init probe_ent and hpriv */
|
|
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
|
|
if (!probe_ent)
|
|
goto out_free;
|
|
|
|
hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
goto out_free;
|
|
|
|
memset(probe_ent, 0, sizeof(*probe_ent));
|
|
probe_ent->dev = pci_dev_to_dev(pdev);
|
|
INIT_LIST_HEAD(&probe_ent->node);
|
|
|
|
probe_ent->sht = sil24_port_info[board_id].sht;
|
|
probe_ent->host_flags = sil24_port_info[board_id].host_flags;
|
|
probe_ent->pio_mask = sil24_port_info[board_id].pio_mask;
|
|
probe_ent->udma_mask = sil24_port_info[board_id].udma_mask;
|
|
probe_ent->port_ops = sil24_port_info[board_id].port_ops;
|
|
probe_ent->n_ports = (board_id == BID_SIL3124) ? 4 : 2;
|
|
|
|
probe_ent->irq = pdev->irq;
|
|
probe_ent->irq_flags = SA_SHIRQ;
|
|
probe_ent->mmio_base = port_base;
|
|
probe_ent->private_data = hpriv;
|
|
|
|
memset(hpriv, 0, sizeof(*hpriv));
|
|
hpriv->host_base = host_base;
|
|
hpriv->port_base = port_base;
|
|
|
|
/*
|
|
* Configure the device
|
|
*/
|
|
/*
|
|
* FIXME: This device is certainly 64-bit capable. We just
|
|
* don't know how to use it. After fixing 32bit activation in
|
|
* this function, enable 64bit masks here.
|
|
*/
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
|
|
pci_name(pdev));
|
|
goto out_free;
|
|
}
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
|
|
pci_name(pdev));
|
|
goto out_free;
|
|
}
|
|
|
|
/* GPIO off */
|
|
writel(0, host_base + HOST_FLASH_CMD);
|
|
|
|
/* Mask interrupts during initialization */
|
|
writel(0, host_base + HOST_CTRL);
|
|
|
|
for (i = 0; i < probe_ent->n_ports; i++) {
|
|
void *port = port_base + i * PORT_REGS_SIZE;
|
|
unsigned long portu = (unsigned long)port;
|
|
u32 tmp;
|
|
int cnt;
|
|
|
|
probe_ent->port[i].cmd_addr = portu + PORT_PRB;
|
|
probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
|
|
|
|
ata_std_ports(&probe_ent->port[i]);
|
|
|
|
/* Initial PHY setting */
|
|
writel(0x20c, port + PORT_PHY_CFG);
|
|
|
|
/* Clear port RST */
|
|
tmp = readl(port + PORT_CTRL_STAT);
|
|
if (tmp & PORT_CS_PORT_RST) {
|
|
writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
|
|
readl(port + PORT_CTRL_STAT); /* sync */
|
|
for (cnt = 0; cnt < 10; cnt++) {
|
|
msleep(10);
|
|
tmp = readl(port + PORT_CTRL_STAT);
|
|
if (!(tmp & PORT_CS_PORT_RST))
|
|
break;
|
|
}
|
|
if (tmp & PORT_CS_PORT_RST)
|
|
printk(KERN_ERR DRV_NAME
|
|
"(%s): failed to clear port RST\n",
|
|
pci_name(pdev));
|
|
}
|
|
|
|
/* Zero error counters. */
|
|
writel(0x8000, port + PORT_DECODE_ERR_THRESH);
|
|
writel(0x8000, port + PORT_CRC_ERR_THRESH);
|
|
writel(0x8000, port + PORT_HSHK_ERR_THRESH);
|
|
writel(0x0000, port + PORT_DECODE_ERR_CNT);
|
|
writel(0x0000, port + PORT_CRC_ERR_CNT);
|
|
writel(0x0000, port + PORT_HSHK_ERR_CNT);
|
|
|
|
/* FIXME: 32bit activation? */
|
|
writel(0, port + PORT_ACTIVATE_UPPER_ADDR);
|
|
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT);
|
|
|
|
/* Configure interrupts */
|
|
writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
|
|
writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS,
|
|
port + PORT_IRQ_ENABLE_SET);
|
|
|
|
/* Clear interrupts */
|
|
writel(0x0fff0fff, port + PORT_IRQ_STAT);
|
|
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
|
|
}
|
|
|
|
/* Turn on interrupts */
|
|
writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* FIXME: check ata_device_add return value */
|
|
ata_device_add(probe_ent);
|
|
|
|
kfree(probe_ent);
|
|
return 0;
|
|
|
|
out_free:
|
|
if (host_base)
|
|
iounmap(host_base);
|
|
if (port_base)
|
|
iounmap(port_base);
|
|
kfree(probe_ent);
|
|
kfree(hpriv);
|
|
pci_release_regions(pdev);
|
|
out_disable:
|
|
pci_disable_device(pdev);
|
|
return rc;
|
|
}
|
|
|
|
static int __init sil24_init(void)
|
|
{
|
|
return pci_module_init(&sil24_pci_driver);
|
|
}
|
|
|
|
static void __exit sil24_exit(void)
|
|
{
|
|
pci_unregister_driver(&sil24_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Tejun Heo");
|
|
MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
|
|
|
|
module_init(sil24_init);
|
|
module_exit(sil24_exit);
|