529 lines
14 KiB
C
529 lines
14 KiB
C
/*
|
|
* AMD64 class Memory Controller kernel module
|
|
*
|
|
* Copyright (c) 2009 SoftwareBitMaker.
|
|
* Copyright (c) 2009-15 Advanced Micro Devices, Inc.
|
|
*
|
|
* This file may be distributed under the terms of the
|
|
* GNU General Public License.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mmzone.h>
|
|
#include <linux/edac.h>
|
|
#include <asm/cpu_device_id.h>
|
|
#include <asm/msr.h>
|
|
#include "edac_module.h"
|
|
#include "mce_amd.h"
|
|
|
|
#define amd64_info(fmt, arg...) \
|
|
edac_printk(KERN_INFO, "amd64", fmt, ##arg)
|
|
|
|
#define amd64_warn(fmt, arg...) \
|
|
edac_printk(KERN_WARNING, "amd64", "Warning: " fmt, ##arg)
|
|
|
|
#define amd64_err(fmt, arg...) \
|
|
edac_printk(KERN_ERR, "amd64", "Error: " fmt, ##arg)
|
|
|
|
#define amd64_mc_warn(mci, fmt, arg...) \
|
|
edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
|
|
|
|
#define amd64_mc_err(mci, fmt, arg...) \
|
|
edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
|
|
|
|
/*
|
|
* Throughout the comments in this code, the following terms are used:
|
|
*
|
|
* SysAddr, DramAddr, and InputAddr
|
|
*
|
|
* These terms come directly from the amd64 documentation
|
|
* (AMD publication #26094). They are defined as follows:
|
|
*
|
|
* SysAddr:
|
|
* This is a physical address generated by a CPU core or a device
|
|
* doing DMA. If generated by a CPU core, a SysAddr is the result of
|
|
* a virtual to physical address translation by the CPU core's address
|
|
* translation mechanism (MMU).
|
|
*
|
|
* DramAddr:
|
|
* A DramAddr is derived from a SysAddr by subtracting an offset that
|
|
* depends on which node the SysAddr maps to and whether the SysAddr
|
|
* is within a range affected by memory hoisting. The DRAM Base
|
|
* (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
|
|
* determine which node a SysAddr maps to.
|
|
*
|
|
* If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
|
|
* is within the range of addresses specified by this register, then
|
|
* a value x from the DHAR is subtracted from the SysAddr to produce a
|
|
* DramAddr. Here, x represents the base address for the node that
|
|
* the SysAddr maps to plus an offset due to memory hoisting. See
|
|
* section 3.4.8 and the comments in amd64_get_dram_hole_info() and
|
|
* sys_addr_to_dram_addr() below for more information.
|
|
*
|
|
* If the SysAddr is not affected by the DHAR then a value y is
|
|
* subtracted from the SysAddr to produce a DramAddr. Here, y is the
|
|
* base address for the node that the SysAddr maps to. See section
|
|
* 3.4.4 and the comments in sys_addr_to_dram_addr() below for more
|
|
* information.
|
|
*
|
|
* InputAddr:
|
|
* A DramAddr is translated to an InputAddr before being passed to the
|
|
* memory controller for the node that the DramAddr is associated
|
|
* with. The memory controller then maps the InputAddr to a csrow.
|
|
* If node interleaving is not in use, then the InputAddr has the same
|
|
* value as the DramAddr. Otherwise, the InputAddr is produced by
|
|
* discarding the bits used for node interleaving from the DramAddr.
|
|
* See section 3.4.4 for more information.
|
|
*
|
|
* The memory controller for a given node uses its DRAM CS Base and
|
|
* DRAM CS Mask registers to map an InputAddr to a csrow. See
|
|
* sections 3.5.4 and 3.5.5 for more information.
|
|
*/
|
|
|
|
#define EDAC_AMD64_VERSION "3.5.0"
|
|
#define EDAC_MOD_STR "amd64_edac"
|
|
|
|
/* Extended Model from CPUID, for CPU Revision numbers */
|
|
#define K8_REV_D 1
|
|
#define K8_REV_E 2
|
|
#define K8_REV_F 4
|
|
|
|
/* Hardware limit on ChipSelect rows per MC and processors per system */
|
|
#define NUM_CHIPSELECTS 8
|
|
#define DRAM_RANGES 8
|
|
|
|
#define ON true
|
|
#define OFF false
|
|
|
|
/*
|
|
* PCI-defined configuration space registers
|
|
*/
|
|
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
|
|
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
|
|
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
|
|
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
|
|
#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
|
|
#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
|
|
#define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531
|
|
#define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532
|
|
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
|
|
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582
|
|
#define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460
|
|
#define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466
|
|
|
|
/*
|
|
* Function 1 - Address Map
|
|
*/
|
|
#define DRAM_BASE_LO 0x40
|
|
#define DRAM_LIMIT_LO 0x44
|
|
|
|
/*
|
|
* F15 M30h D18F1x2[1C:00]
|
|
*/
|
|
#define DRAM_CONT_BASE 0x200
|
|
#define DRAM_CONT_LIMIT 0x204
|
|
|
|
/*
|
|
* F15 M30h D18F1x2[4C:40]
|
|
*/
|
|
#define DRAM_CONT_HIGH_OFF 0x240
|
|
|
|
#define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3))
|
|
#define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
|
|
#define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7))
|
|
|
|
#define DHAR 0xf0
|
|
#define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1))
|
|
#define dhar_base(pvt) ((pvt)->dhar & 0xff000000)
|
|
#define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16)
|
|
|
|
/* NOTE: Extra mask bit vs K8 */
|
|
#define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16)
|
|
|
|
#define DCT_CFG_SEL 0x10C
|
|
|
|
#define DRAM_LOCAL_NODE_BASE 0x120
|
|
#define DRAM_LOCAL_NODE_LIM 0x124
|
|
|
|
#define DRAM_BASE_HI 0x140
|
|
#define DRAM_LIMIT_HI 0x144
|
|
|
|
|
|
/*
|
|
* Function 2 - DRAM controller
|
|
*/
|
|
#define DCSB0 0x40
|
|
#define DCSB1 0x140
|
|
#define DCSB_CS_ENABLE BIT(0)
|
|
|
|
#define DCSM0 0x60
|
|
#define DCSM1 0x160
|
|
|
|
#define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
|
|
|
|
#define DRAM_CONTROL 0x78
|
|
|
|
#define DBAM0 0x80
|
|
#define DBAM1 0x180
|
|
|
|
/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
|
|
#define DBAM_DIMM(i, reg) ((((reg) >> (4*(i)))) & 0xF)
|
|
|
|
#define DBAM_MAX_VALUE 11
|
|
|
|
#define DCLR0 0x90
|
|
#define DCLR1 0x190
|
|
#define REVE_WIDTH_128 BIT(16)
|
|
#define WIDTH_128 BIT(11)
|
|
|
|
#define DCHR0 0x94
|
|
#define DCHR1 0x194
|
|
#define DDR3_MODE BIT(8)
|
|
|
|
#define DCT_SEL_LO 0x110
|
|
#define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0))
|
|
#define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2))
|
|
|
|
#define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))
|
|
|
|
#define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5))
|
|
#define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10))
|
|
|
|
#define SWAP_INTLV_REG 0x10c
|
|
|
|
#define DCT_SEL_HI 0x114
|
|
|
|
#define F15H_M60H_SCRCTRL 0x1C8
|
|
#define F17H_SCR_BASE_ADDR 0x48
|
|
#define F17H_SCR_LIMIT_ADDR 0x4C
|
|
|
|
/*
|
|
* Function 3 - Misc Control
|
|
*/
|
|
#define NBCTL 0x40
|
|
|
|
#define NBCFG 0x44
|
|
#define NBCFG_CHIPKILL BIT(23)
|
|
#define NBCFG_ECC_ENABLE BIT(22)
|
|
|
|
/* F3x48: NBSL */
|
|
#define F10_NBSL_EXT_ERR_ECC 0x8
|
|
#define NBSL_PP_OBS 0x2
|
|
|
|
#define SCRCTRL 0x58
|
|
|
|
#define F10_ONLINE_SPARE 0xB0
|
|
#define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
|
|
#define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
|
|
|
|
#define F10_NB_ARRAY_ADDR 0xB8
|
|
#define F10_NB_ARRAY_DRAM BIT(31)
|
|
|
|
/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */
|
|
#define SET_NB_ARRAY_ADDR(section) (((section) & 0x3) << 1)
|
|
|
|
#define F10_NB_ARRAY_DATA 0xBC
|
|
#define F10_NB_ARR_ECC_WR_REQ BIT(17)
|
|
#define SET_NB_DRAM_INJECTION_WRITE(inj) \
|
|
(BIT(((inj.word) & 0xF) + 20) | \
|
|
F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
|
|
#define SET_NB_DRAM_INJECTION_READ(inj) \
|
|
(BIT(((inj.word) & 0xF) + 20) | \
|
|
BIT(16) | inj.bit_map)
|
|
|
|
|
|
#define NBCAP 0xE8
|
|
#define NBCAP_CHIPKILL BIT(4)
|
|
#define NBCAP_SECDED BIT(3)
|
|
#define NBCAP_DCT_DUAL BIT(0)
|
|
|
|
#define EXT_NB_MCA_CFG 0x180
|
|
|
|
/* MSRs */
|
|
#define MSR_MCGCTL_NBE BIT(4)
|
|
|
|
/* F17h */
|
|
|
|
/* F0: */
|
|
#define DF_DHAR 0x104
|
|
|
|
/* UMC CH register offsets */
|
|
#define UMCCH_BASE_ADDR 0x0
|
|
#define UMCCH_ADDR_MASK 0x20
|
|
#define UMCCH_ADDR_CFG 0x30
|
|
#define UMCCH_DIMM_CFG 0x80
|
|
#define UMCCH_UMC_CFG 0x100
|
|
#define UMCCH_SDP_CTRL 0x104
|
|
#define UMCCH_ECC_CTRL 0x14C
|
|
#define UMCCH_ECC_BAD_SYMBOL 0xD90
|
|
#define UMCCH_UMC_CAP 0xDF0
|
|
#define UMCCH_UMC_CAP_HI 0xDF4
|
|
|
|
/* UMC CH bitfields */
|
|
#define UMC_ECC_CHIPKILL_CAP BIT(31)
|
|
#define UMC_ECC_ENABLED BIT(30)
|
|
|
|
#define UMC_SDP_INIT BIT(31)
|
|
|
|
#define NUM_UMCS 2
|
|
|
|
enum amd_families {
|
|
K8_CPUS = 0,
|
|
F10_CPUS,
|
|
F15_CPUS,
|
|
F15_M30H_CPUS,
|
|
F15_M60H_CPUS,
|
|
F16_CPUS,
|
|
F16_M30H_CPUS,
|
|
F17_CPUS,
|
|
NUM_FAMILIES,
|
|
};
|
|
|
|
/* Error injection control structure */
|
|
struct error_injection {
|
|
u32 section;
|
|
u32 word;
|
|
u32 bit_map;
|
|
};
|
|
|
|
/* low and high part of PCI config space regs */
|
|
struct reg_pair {
|
|
u32 lo, hi;
|
|
};
|
|
|
|
/*
|
|
* See F1x[1, 0][7C:40] DRAM Base/Limit Registers
|
|
*/
|
|
struct dram_range {
|
|
struct reg_pair base;
|
|
struct reg_pair lim;
|
|
};
|
|
|
|
/* A DCT chip selects collection */
|
|
struct chip_select {
|
|
u32 csbases[NUM_CHIPSELECTS];
|
|
u8 b_cnt;
|
|
|
|
u32 csmasks[NUM_CHIPSELECTS];
|
|
u8 m_cnt;
|
|
};
|
|
|
|
struct amd64_umc {
|
|
u32 dimm_cfg; /* DIMM Configuration reg */
|
|
u32 umc_cfg; /* Configuration reg */
|
|
u32 sdp_ctrl; /* SDP Control reg */
|
|
u32 ecc_ctrl; /* DRAM ECC Control reg */
|
|
u32 umc_cap_hi; /* Capabilities High reg */
|
|
};
|
|
|
|
struct amd64_pvt {
|
|
struct low_ops *ops;
|
|
|
|
/* pci_device handles which we utilize */
|
|
struct pci_dev *F0, *F1, *F2, *F3, *F6;
|
|
|
|
u16 mc_node_id; /* MC index of this MC node */
|
|
u8 fam; /* CPU family */
|
|
u8 model; /* ... model */
|
|
u8 stepping; /* ... stepping */
|
|
|
|
int ext_model; /* extended model value of this node */
|
|
int channel_count;
|
|
|
|
/* Raw registers */
|
|
u32 dclr0; /* DRAM Configuration Low DCT0 reg */
|
|
u32 dclr1; /* DRAM Configuration Low DCT1 reg */
|
|
u32 dchr0; /* DRAM Configuration High DCT0 reg */
|
|
u32 dchr1; /* DRAM Configuration High DCT1 reg */
|
|
u32 nbcap; /* North Bridge Capabilities */
|
|
u32 nbcfg; /* F10 North Bridge Configuration */
|
|
u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */
|
|
u32 dhar; /* DRAM Hoist reg */
|
|
u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */
|
|
u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */
|
|
|
|
/* one for each DCT */
|
|
struct chip_select csels[2];
|
|
|
|
/* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
|
|
struct dram_range ranges[DRAM_RANGES];
|
|
|
|
u64 top_mem; /* top of memory below 4GB */
|
|
u64 top_mem2; /* top of memory above 4GB */
|
|
|
|
u32 dct_sel_lo; /* DRAM Controller Select Low */
|
|
u32 dct_sel_hi; /* DRAM Controller Select High */
|
|
u32 online_spare; /* On-Line spare Reg */
|
|
|
|
/* x4 or x8 syndromes in use */
|
|
u8 ecc_sym_sz;
|
|
|
|
/* place to store error injection parameters prior to issue */
|
|
struct error_injection injection;
|
|
|
|
/* cache the dram_type */
|
|
enum mem_type dram_type;
|
|
|
|
struct amd64_umc *umc; /* UMC registers */
|
|
};
|
|
|
|
enum err_codes {
|
|
DECODE_OK = 0,
|
|
ERR_NODE = -1,
|
|
ERR_CSROW = -2,
|
|
ERR_CHANNEL = -3,
|
|
ERR_SYND = -4,
|
|
ERR_NORM_ADDR = -5,
|
|
};
|
|
|
|
struct err_info {
|
|
int err_code;
|
|
struct mem_ctl_info *src_mci;
|
|
int csrow;
|
|
int channel;
|
|
u16 syndrome;
|
|
u32 page;
|
|
u32 offset;
|
|
};
|
|
|
|
static inline u32 get_umc_base(u8 channel)
|
|
{
|
|
/* ch0: 0x50000, ch1: 0x150000 */
|
|
return 0x50000 + (!!channel << 20);
|
|
}
|
|
|
|
static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
|
|
{
|
|
u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
|
|
|
|
if (boot_cpu_data.x86 == 0xf)
|
|
return addr;
|
|
|
|
return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
|
|
}
|
|
|
|
static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
|
|
{
|
|
u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
|
|
|
|
if (boot_cpu_data.x86 == 0xf)
|
|
return lim;
|
|
|
|
return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
|
|
}
|
|
|
|
static inline u16 extract_syndrome(u64 status)
|
|
{
|
|
return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00);
|
|
}
|
|
|
|
static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt)
|
|
{
|
|
if (pvt->fam == 0x15 && pvt->model >= 0x30)
|
|
return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) |
|
|
((pvt->dct_sel_lo >> 6) & 0x3);
|
|
|
|
return ((pvt)->dct_sel_lo >> 6) & 0x3;
|
|
}
|
|
/*
|
|
* per-node ECC settings descriptor
|
|
*/
|
|
struct ecc_settings {
|
|
u32 old_nbctl;
|
|
bool nbctl_valid;
|
|
|
|
struct flags {
|
|
unsigned long nb_mce_enable:1;
|
|
unsigned long nb_ecc_prev:1;
|
|
} flags;
|
|
};
|
|
|
|
#ifdef CONFIG_EDAC_DEBUG
|
|
extern const struct attribute_group amd64_edac_dbg_group;
|
|
#endif
|
|
|
|
#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
|
|
extern const struct attribute_group amd64_edac_inj_group;
|
|
#endif
|
|
|
|
/*
|
|
* Each of the PCI Device IDs types have their own set of hardware accessor
|
|
* functions and per device encoding/decoding logic.
|
|
*/
|
|
struct low_ops {
|
|
int (*early_channel_count) (struct amd64_pvt *pvt);
|
|
void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr,
|
|
struct err_info *);
|
|
int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct,
|
|
unsigned cs_mode, int cs_mask_nr);
|
|
};
|
|
|
|
struct amd64_family_type {
|
|
const char *ctl_name;
|
|
u16 f0_id, f1_id, f2_id, f6_id;
|
|
struct low_ops ops;
|
|
};
|
|
|
|
int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
|
|
u32 *val, const char *func);
|
|
int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
|
|
u32 val, const char *func);
|
|
|
|
#define amd64_read_pci_cfg(pdev, offset, val) \
|
|
__amd64_read_pci_cfg_dword(pdev, offset, val, __func__)
|
|
|
|
#define amd64_write_pci_cfg(pdev, offset, val) \
|
|
__amd64_write_pci_cfg_dword(pdev, offset, val, __func__)
|
|
|
|
int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
|
|
u64 *hole_offset, u64 *hole_size);
|
|
|
|
#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
|
|
|
|
/* Injection helpers */
|
|
static inline void disable_caches(void *dummy)
|
|
{
|
|
write_cr0(read_cr0() | X86_CR0_CD);
|
|
wbinvd();
|
|
}
|
|
|
|
static inline void enable_caches(void *dummy)
|
|
{
|
|
write_cr0(read_cr0() & ~X86_CR0_CD);
|
|
}
|
|
|
|
static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i)
|
|
{
|
|
if (pvt->fam == 0x15 && pvt->model >= 0x30) {
|
|
u32 tmp;
|
|
amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp);
|
|
return (u8) tmp & 0xF;
|
|
}
|
|
return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7;
|
|
}
|
|
|
|
static inline u8 dhar_valid(struct amd64_pvt *pvt)
|
|
{
|
|
if (pvt->fam == 0x15 && pvt->model >= 0x30) {
|
|
u32 tmp;
|
|
amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
|
|
return (tmp >> 1) & BIT(0);
|
|
}
|
|
return (pvt)->dhar & BIT(0);
|
|
}
|
|
|
|
static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt)
|
|
{
|
|
if (pvt->fam == 0x15 && pvt->model >= 0x30) {
|
|
u32 tmp;
|
|
amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
|
|
return (tmp >> 11) & 0x1FFF;
|
|
}
|
|
return (pvt)->dct_sel_lo & 0xFFFFF800;
|
|
}
|