linux/drivers/ide
Anton Vorontsov 6d1cee4436 alim15x3: disable init_hwif_ali15x3 for PowerPC
We don't need init_hwif_ali15x3() on the PowerPC systems either.

Before:

ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
ALI15X3: 100% native mode on irq 19
    ide0: BM-DMA at 0x1120-0x1127
    ide1: BM-DMA at 0x1128-0x112f
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0: Disabled unable to get IRQ 14.
ide0: failed to initialize IDE interface
ide1: Disabled unable to get IRQ 15.
ide1: failed to initialize IDE interface

After:

ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
ALI15X3: 100% native mode on irq 19
    ide0: BM-DMA at 0x1120-0x1127
    ide1: BM-DMA at 0x1128-0x112f
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0 at 0x1100-0x1107,0x110a on irq 19
ide1 at 0x1110-0x1117,0x111a on irq 19
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache

ide0 works well, though I can't test ide1, it isn't traced out on
the board.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-29 22:57:38 +02:00
..
arm ide: add IDE_HFLAG_MMIO host flag (take 2) 2008-04-28 23:44:37 +02:00
h8300 ide: remove ->INW and ->OUTW methods 2008-04-28 23:44:41 +02:00
legacy ide: add IDE_HFLAG_MMIO host flag (take 2) 2008-04-28 23:44:37 +02:00
mips ide: remove ->INS{W,L} and ->OUTS{W,L} methods 2008-04-28 23:44:37 +02:00
pci alim15x3: disable init_hwif_ali15x3 for PowerPC 2008-04-29 22:57:38 +02:00
ppc ide: add IDE_HFLAG_MMIO host flag (take 2) 2008-04-28 23:44:37 +02:00
Kconfig remove the broken ETRAX_IDE driver 2008-04-28 23:44:42 +02:00
Makefile remove the broken ETRAX_IDE driver 2008-04-28 23:44:42 +02:00
ide-acpi.c ide: add "noacpi" / "acpigtf" / "acpionboot" parameters 2008-04-27 15:38:30 +02:00
ide-cd.c block: replace sizeof(rq->cmd) with BLK_MAX_CDB 2008-04-29 14:48:55 +02:00
ide-cd.h ide-cd: remove the internal 64k buffer 2008-04-26 17:36:37 +02:00
ide-cd_ioctl.c ide-cd: mark REQ_TYPE_ATA_PC write requests with REQ_RW flag 2008-03-07 21:53:49 +01:00
ide-cd_verbose.c block: replace sizeof(rq->cmd) with BLK_MAX_CDB 2008-04-29 14:48:55 +02:00
ide-disk.c ide-disk: fix issues found by checkpatch.pl 2008-04-26 17:36:37 +02:00
ide-dma.c ide: remove ->dma_prdtable field from ide_hwif_t 2008-04-28 23:44:42 +02:00
ide-floppy.c ide: add ide_pad_transfer() helper 2008-04-28 23:44:41 +02:00
ide-generic.c ide: cleanup setting hwif->mmio flag 2008-04-26 22:25:19 +02:00
ide-io.c ide: use blk_rq_init() to initialize the request 2008-04-29 14:48:55 +02:00
ide-iops.c ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[] 2008-04-28 23:44:43 +02:00
ide-lib.c ide: add ->tf_load and ->tf_read methods 2008-04-28 23:44:40 +02:00
ide-pnp.c ide: make ide_unregister() take 'ide_hwif_t *' as an argument (take 2) 2008-04-27 15:38:31 +02:00
ide-probe.c ide: always use ->OUTBSYNC method for executing commands 2008-04-28 23:44:38 +02:00
ide-proc.c drivers: use non-racy method for proc entries creation (2) 2008-04-29 08:06:22 -07:00
ide-scan-pci.c ide: replace remaining __FUNCTION__ occurrences 2008-04-26 22:25:20 +02:00
ide-tape.c ide: use blk_rq_init() to initialize the request 2008-04-29 14:48:55 +02:00
ide-taskfile.c ide: use blk_rq_init() to initialize the request 2008-04-29 14:48:55 +02:00
ide-timing.h Spelling fixes: lenght->length 2008-02-03 15:42:53 +02:00
ide.c ide: use blk_rq_init() to initialize the request 2008-04-29 14:48:55 +02:00
setup-pci.c ide: constify struct ide_dma_ops 2008-04-26 22:25:24 +02:00