linux/drivers/media/dvb-frontends/mt352_priv.h

124 lines
3.5 KiB
C

/*
* Driver for Zarlink DVB-T MT352 demodulator
*
* Written by Holger Waechtler <holger@qanu.de>
* and Daniel Mack <daniel@qanu.de>
*
* AVerMedia AVerTV DVB-T 771 support by
* Wolfram Joost <dbox2@frokaschwei.de>
*
* Support for Samsung TDTC9251DH01C(M) tuner
* Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
* Amauri Celani <acelani@essegi.net>
*
* DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
* Christopher Pascoe <c.pascoe@itee.uq.edu.au>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*/
#ifndef _MT352_PRIV_
#define _MT352_PRIV_
#define ID_MT352 0x13
#define msb(x) (((x) >> 8) & 0xff)
#define lsb(x) ((x) & 0xff)
enum mt352_reg_addr {
STATUS_0 = 0x00,
STATUS_1 = 0x01,
STATUS_2 = 0x02,
STATUS_3 = 0x03,
STATUS_4 = 0x04,
INTERRUPT_0 = 0x05,
INTERRUPT_1 = 0x06,
INTERRUPT_2 = 0x07,
INTERRUPT_3 = 0x08,
SNR = 0x09,
VIT_ERR_CNT_2 = 0x0A,
VIT_ERR_CNT_1 = 0x0B,
VIT_ERR_CNT_0 = 0x0C,
RS_ERR_CNT_2 = 0x0D,
RS_ERR_CNT_1 = 0x0E,
RS_ERR_CNT_0 = 0x0F,
RS_UBC_1 = 0x10,
RS_UBC_0 = 0x11,
AGC_GAIN_3 = 0x12,
AGC_GAIN_2 = 0x13,
AGC_GAIN_1 = 0x14,
AGC_GAIN_0 = 0x15,
FREQ_OFFSET_2 = 0x17,
FREQ_OFFSET_1 = 0x18,
FREQ_OFFSET_0 = 0x19,
TIMING_OFFSET_1 = 0x1A,
TIMING_OFFSET_0 = 0x1B,
CHAN_FREQ_1 = 0x1C,
CHAN_FREQ_0 = 0x1D,
TPS_RECEIVED_1 = 0x1E,
TPS_RECEIVED_0 = 0x1F,
TPS_CURRENT_1 = 0x20,
TPS_CURRENT_0 = 0x21,
TPS_CELL_ID_1 = 0x22,
TPS_CELL_ID_0 = 0x23,
TPS_MISC_DATA_2 = 0x24,
TPS_MISC_DATA_1 = 0x25,
TPS_MISC_DATA_0 = 0x26,
RESET = 0x50,
TPS_GIVEN_1 = 0x51,
TPS_GIVEN_0 = 0x52,
ACQ_CTL = 0x53,
TRL_NOMINAL_RATE_1 = 0x54,
TRL_NOMINAL_RATE_0 = 0x55,
INPUT_FREQ_1 = 0x56,
INPUT_FREQ_0 = 0x57,
TUNER_ADDR = 0x58,
CHAN_START_1 = 0x59,
CHAN_START_0 = 0x5A,
CONT_1 = 0x5B,
CONT_0 = 0x5C,
TUNER_GO = 0x5D,
STATUS_EN_0 = 0x5F,
STATUS_EN_1 = 0x60,
INTERRUPT_EN_0 = 0x61,
INTERRUPT_EN_1 = 0x62,
INTERRUPT_EN_2 = 0x63,
INTERRUPT_EN_3 = 0x64,
AGC_TARGET = 0x67,
AGC_CTL = 0x68,
CAPT_RANGE = 0x75,
SNR_SELECT_1 = 0x79,
SNR_SELECT_0 = 0x7A,
RS_ERR_PER_1 = 0x7C,
RS_ERR_PER_0 = 0x7D,
CHIP_ID = 0x7F,
CHAN_STOP_1 = 0x80,
CHAN_STOP_0 = 0x81,
CHAN_STEP_1 = 0x82,
CHAN_STEP_0 = 0x83,
FEC_LOCK_TIME = 0x85,
OFDM_LOCK_TIME = 0x86,
ACQ_DELAY = 0x87,
SCAN_CTL = 0x88,
CLOCK_CTL = 0x89,
CONFIG = 0x8A,
MCLK_RATIO = 0x8B,
GPP_CTL = 0x8C,
ADC_CTL_1 = 0x8E,
ADC_CTL_0 = 0x8F
};
/* here we assume 1/6MHz == 166.66kHz stepsize */
#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
#endif /* _MT352_PRIV_ */