2ef13294d2
Commit 2fde99cb55
"UBIFS: mark VFS SB RO too"
introduced regression. This commit made UBIFS set the 'MS_RDONLY' flag in the
VFS superblock when it switches to R/O mode due to an error. This was done
to make VFS show the R/O UBIFS flag in /proc/mounts.
However, several places in UBIFS relied on the 'MS_RDONLY' flag and assume this
flag can only change when we re-mount. For example, 'ubifs_put_super()'.
This patch introduces new UBIFS flag - 'c->ro_mount' which changes only when
we re-mount, and preserves the way UBIFS was originally mounted (R/W or R/O).
This allows us to de-initialize UBIFS cleanly in 'ubifs_put_super()'.
This patch also changes all 'ubifs_assert(!c->ro_media)' assertions to
'ubifs_assert(!c->ro_media && !c->ro_mount)', because we never should write
anything if the FS was mounter R/O.
All the places where we test for 'MS_RDONLY' flag in the VFS SB were changed
and now we test the 'c->ro_mount' flag instead, because it preserves the
original UBIFS mount type, unlike the 'MS_RDONLY' flag.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
1447 lines
42 KiB
C
1447 lines
42 KiB
C
/*
|
|
* This file is part of UBIFS.
|
|
*
|
|
* Copyright (C) 2006-2008 Nokia Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc., 51
|
|
* Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
* Authors: Artem Bityutskiy (Битюцкий Артём)
|
|
* Adrian Hunter
|
|
*/
|
|
|
|
/*
|
|
* This file implements UBIFS journal.
|
|
*
|
|
* The journal consists of 2 parts - the log and bud LEBs. The log has fixed
|
|
* length and position, while a bud logical eraseblock is any LEB in the main
|
|
* area. Buds contain file system data - data nodes, inode nodes, etc. The log
|
|
* contains only references to buds and some other stuff like commit
|
|
* start node. The idea is that when we commit the journal, we do
|
|
* not copy the data, the buds just become indexed. Since after the commit the
|
|
* nodes in bud eraseblocks become leaf nodes of the file system index tree, we
|
|
* use term "bud". Analogy is obvious, bud eraseblocks contain nodes which will
|
|
* become leafs in the future.
|
|
*
|
|
* The journal is multi-headed because we want to write data to the journal as
|
|
* optimally as possible. It is nice to have nodes belonging to the same inode
|
|
* in one LEB, so we may write data owned by different inodes to different
|
|
* journal heads, although at present only one data head is used.
|
|
*
|
|
* For recovery reasons, the base head contains all inode nodes, all directory
|
|
* entry nodes and all truncate nodes. This means that the other heads contain
|
|
* only data nodes.
|
|
*
|
|
* Bud LEBs may be half-indexed. For example, if the bud was not full at the
|
|
* time of commit, the bud is retained to continue to be used in the journal,
|
|
* even though the "front" of the LEB is now indexed. In that case, the log
|
|
* reference contains the offset where the bud starts for the purposes of the
|
|
* journal.
|
|
*
|
|
* The journal size has to be limited, because the larger is the journal, the
|
|
* longer it takes to mount UBIFS (scanning the journal) and the more memory it
|
|
* takes (indexing in the TNC).
|
|
*
|
|
* All the journal write operations like 'ubifs_jnl_update()' here, which write
|
|
* multiple UBIFS nodes to the journal at one go, are atomic with respect to
|
|
* unclean reboots. Should the unclean reboot happen, the recovery code drops
|
|
* all the nodes.
|
|
*/
|
|
|
|
#include "ubifs.h"
|
|
|
|
/**
|
|
* zero_ino_node_unused - zero out unused fields of an on-flash inode node.
|
|
* @ino: the inode to zero out
|
|
*/
|
|
static inline void zero_ino_node_unused(struct ubifs_ino_node *ino)
|
|
{
|
|
memset(ino->padding1, 0, 4);
|
|
memset(ino->padding2, 0, 26);
|
|
}
|
|
|
|
/**
|
|
* zero_dent_node_unused - zero out unused fields of an on-flash directory
|
|
* entry node.
|
|
* @dent: the directory entry to zero out
|
|
*/
|
|
static inline void zero_dent_node_unused(struct ubifs_dent_node *dent)
|
|
{
|
|
dent->padding1 = 0;
|
|
memset(dent->padding2, 0, 4);
|
|
}
|
|
|
|
/**
|
|
* zero_data_node_unused - zero out unused fields of an on-flash data node.
|
|
* @data: the data node to zero out
|
|
*/
|
|
static inline void zero_data_node_unused(struct ubifs_data_node *data)
|
|
{
|
|
memset(data->padding, 0, 2);
|
|
}
|
|
|
|
/**
|
|
* zero_trun_node_unused - zero out unused fields of an on-flash truncation
|
|
* node.
|
|
* @trun: the truncation node to zero out
|
|
*/
|
|
static inline void zero_trun_node_unused(struct ubifs_trun_node *trun)
|
|
{
|
|
memset(trun->padding, 0, 12);
|
|
}
|
|
|
|
/**
|
|
* reserve_space - reserve space in the journal.
|
|
* @c: UBIFS file-system description object
|
|
* @jhead: journal head number
|
|
* @len: node length
|
|
*
|
|
* This function reserves space in journal head @head. If the reservation
|
|
* succeeded, the journal head stays locked and later has to be unlocked using
|
|
* 'release_head()'. 'write_node()' and 'write_head()' functions also unlock
|
|
* it. Returns zero in case of success, %-EAGAIN if commit has to be done, and
|
|
* other negative error codes in case of other failures.
|
|
*/
|
|
static int reserve_space(struct ubifs_info *c, int jhead, int len)
|
|
{
|
|
int err = 0, err1, retries = 0, avail, lnum, offs, squeeze;
|
|
struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf;
|
|
|
|
/*
|
|
* Typically, the base head has smaller nodes written to it, so it is
|
|
* better to try to allocate space at the ends of eraseblocks. This is
|
|
* what the squeeze parameter does.
|
|
*/
|
|
ubifs_assert(!c->ro_media && !c->ro_mount);
|
|
squeeze = (jhead == BASEHD);
|
|
again:
|
|
mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
|
|
|
|
if (c->ro_error) {
|
|
err = -EROFS;
|
|
goto out_unlock;
|
|
}
|
|
|
|
avail = c->leb_size - wbuf->offs - wbuf->used;
|
|
if (wbuf->lnum != -1 && avail >= len)
|
|
return 0;
|
|
|
|
/*
|
|
* Write buffer wasn't seek'ed or there is no enough space - look for an
|
|
* LEB with some empty space.
|
|
*/
|
|
lnum = ubifs_find_free_space(c, len, &offs, squeeze);
|
|
if (lnum >= 0) {
|
|
/* Found an LEB, add it to the journal head */
|
|
err = ubifs_add_bud_to_log(c, jhead, lnum, offs);
|
|
if (err)
|
|
goto out_return;
|
|
/* A new bud was successfully allocated and added to the log */
|
|
goto out;
|
|
}
|
|
|
|
err = lnum;
|
|
if (err != -ENOSPC)
|
|
goto out_unlock;
|
|
|
|
/*
|
|
* No free space, we have to run garbage collector to make
|
|
* some. But the write-buffer mutex has to be unlocked because
|
|
* GC also takes it.
|
|
*/
|
|
dbg_jnl("no free space in jhead %s, run GC", dbg_jhead(jhead));
|
|
mutex_unlock(&wbuf->io_mutex);
|
|
|
|
lnum = ubifs_garbage_collect(c, 0);
|
|
if (lnum < 0) {
|
|
err = lnum;
|
|
if (err != -ENOSPC)
|
|
return err;
|
|
|
|
/*
|
|
* GC could not make a free LEB. But someone else may
|
|
* have allocated new bud for this journal head,
|
|
* because we dropped @wbuf->io_mutex, so try once
|
|
* again.
|
|
*/
|
|
dbg_jnl("GC couldn't make a free LEB for jhead %s",
|
|
dbg_jhead(jhead));
|
|
if (retries++ < 2) {
|
|
dbg_jnl("retry (%d)", retries);
|
|
goto again;
|
|
}
|
|
|
|
dbg_jnl("return -ENOSPC");
|
|
return err;
|
|
}
|
|
|
|
mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
|
|
dbg_jnl("got LEB %d for jhead %s", lnum, dbg_jhead(jhead));
|
|
avail = c->leb_size - wbuf->offs - wbuf->used;
|
|
|
|
if (wbuf->lnum != -1 && avail >= len) {
|
|
/*
|
|
* Someone else has switched the journal head and we have
|
|
* enough space now. This happens when more than one process is
|
|
* trying to write to the same journal head at the same time.
|
|
*/
|
|
dbg_jnl("return LEB %d back, already have LEB %d:%d",
|
|
lnum, wbuf->lnum, wbuf->offs + wbuf->used);
|
|
err = ubifs_return_leb(c, lnum);
|
|
if (err)
|
|
goto out_unlock;
|
|
return 0;
|
|
}
|
|
|
|
err = ubifs_add_bud_to_log(c, jhead, lnum, 0);
|
|
if (err)
|
|
goto out_return;
|
|
offs = 0;
|
|
|
|
out:
|
|
err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, wbuf->dtype);
|
|
if (err)
|
|
goto out_unlock;
|
|
|
|
return 0;
|
|
|
|
out_unlock:
|
|
mutex_unlock(&wbuf->io_mutex);
|
|
return err;
|
|
|
|
out_return:
|
|
/* An error occurred and the LEB has to be returned to lprops */
|
|
ubifs_assert(err < 0);
|
|
err1 = ubifs_return_leb(c, lnum);
|
|
if (err1 && err == -EAGAIN)
|
|
/*
|
|
* Return original error code only if it is not %-EAGAIN,
|
|
* which is not really an error. Otherwise, return the error
|
|
* code of 'ubifs_return_leb()'.
|
|
*/
|
|
err = err1;
|
|
mutex_unlock(&wbuf->io_mutex);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* write_node - write node to a journal head.
|
|
* @c: UBIFS file-system description object
|
|
* @jhead: journal head
|
|
* @node: node to write
|
|
* @len: node length
|
|
* @lnum: LEB number written is returned here
|
|
* @offs: offset written is returned here
|
|
*
|
|
* This function writes a node to reserved space of journal head @jhead.
|
|
* Returns zero in case of success and a negative error code in case of
|
|
* failure.
|
|
*/
|
|
static int write_node(struct ubifs_info *c, int jhead, void *node, int len,
|
|
int *lnum, int *offs)
|
|
{
|
|
struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf;
|
|
|
|
ubifs_assert(jhead != GCHD);
|
|
|
|
*lnum = c->jheads[jhead].wbuf.lnum;
|
|
*offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used;
|
|
|
|
dbg_jnl("jhead %s, LEB %d:%d, len %d",
|
|
dbg_jhead(jhead), *lnum, *offs, len);
|
|
ubifs_prepare_node(c, node, len, 0);
|
|
|
|
return ubifs_wbuf_write_nolock(wbuf, node, len);
|
|
}
|
|
|
|
/**
|
|
* write_head - write data to a journal head.
|
|
* @c: UBIFS file-system description object
|
|
* @jhead: journal head
|
|
* @buf: buffer to write
|
|
* @len: length to write
|
|
* @lnum: LEB number written is returned here
|
|
* @offs: offset written is returned here
|
|
* @sync: non-zero if the write-buffer has to by synchronized
|
|
*
|
|
* This function is the same as 'write_node()' but it does not assume the
|
|
* buffer it is writing is a node, so it does not prepare it (which means
|
|
* initializing common header and calculating CRC).
|
|
*/
|
|
static int write_head(struct ubifs_info *c, int jhead, void *buf, int len,
|
|
int *lnum, int *offs, int sync)
|
|
{
|
|
int err;
|
|
struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf;
|
|
|
|
ubifs_assert(jhead != GCHD);
|
|
|
|
*lnum = c->jheads[jhead].wbuf.lnum;
|
|
*offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used;
|
|
dbg_jnl("jhead %s, LEB %d:%d, len %d",
|
|
dbg_jhead(jhead), *lnum, *offs, len);
|
|
|
|
err = ubifs_wbuf_write_nolock(wbuf, buf, len);
|
|
if (err)
|
|
return err;
|
|
if (sync)
|
|
err = ubifs_wbuf_sync_nolock(wbuf);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* make_reservation - reserve journal space.
|
|
* @c: UBIFS file-system description object
|
|
* @jhead: journal head
|
|
* @len: how many bytes to reserve
|
|
*
|
|
* This function makes space reservation in journal head @jhead. The function
|
|
* takes the commit lock and locks the journal head, and the caller has to
|
|
* unlock the head and finish the reservation with 'finish_reservation()'.
|
|
* Returns zero in case of success and a negative error code in case of
|
|
* failure.
|
|
*
|
|
* Note, the journal head may be unlocked as soon as the data is written, while
|
|
* the commit lock has to be released after the data has been added to the
|
|
* TNC.
|
|
*/
|
|
static int make_reservation(struct ubifs_info *c, int jhead, int len)
|
|
{
|
|
int err, cmt_retries = 0, nospc_retries = 0;
|
|
|
|
again:
|
|
down_read(&c->commit_sem);
|
|
err = reserve_space(c, jhead, len);
|
|
if (!err)
|
|
return 0;
|
|
up_read(&c->commit_sem);
|
|
|
|
if (err == -ENOSPC) {
|
|
/*
|
|
* GC could not make any progress. We should try to commit
|
|
* once because it could make some dirty space and GC would
|
|
* make progress, so make the error -EAGAIN so that the below
|
|
* will commit and re-try.
|
|
*/
|
|
if (nospc_retries++ < 2) {
|
|
dbg_jnl("no space, retry");
|
|
err = -EAGAIN;
|
|
}
|
|
|
|
/*
|
|
* This means that the budgeting is incorrect. We always have
|
|
* to be able to write to the media, because all operations are
|
|
* budgeted. Deletions are not budgeted, though, but we reserve
|
|
* an extra LEB for them.
|
|
*/
|
|
}
|
|
|
|
if (err != -EAGAIN)
|
|
goto out;
|
|
|
|
/*
|
|
* -EAGAIN means that the journal is full or too large, or the above
|
|
* code wants to do one commit. Do this and re-try.
|
|
*/
|
|
if (cmt_retries > 128) {
|
|
/*
|
|
* This should not happen unless the journal size limitations
|
|
* are too tough.
|
|
*/
|
|
ubifs_err("stuck in space allocation");
|
|
err = -ENOSPC;
|
|
goto out;
|
|
} else if (cmt_retries > 32)
|
|
ubifs_warn("too many space allocation re-tries (%d)",
|
|
cmt_retries);
|
|
|
|
dbg_jnl("-EAGAIN, commit and retry (retried %d times)",
|
|
cmt_retries);
|
|
cmt_retries += 1;
|
|
|
|
err = ubifs_run_commit(c);
|
|
if (err)
|
|
return err;
|
|
goto again;
|
|
|
|
out:
|
|
ubifs_err("cannot reserve %d bytes in jhead %d, error %d",
|
|
len, jhead, err);
|
|
if (err == -ENOSPC) {
|
|
/* This are some budgeting problems, print useful information */
|
|
down_write(&c->commit_sem);
|
|
spin_lock(&c->space_lock);
|
|
dbg_dump_stack();
|
|
dbg_dump_budg(c);
|
|
spin_unlock(&c->space_lock);
|
|
dbg_dump_lprops(c);
|
|
cmt_retries = dbg_check_lprops(c);
|
|
up_write(&c->commit_sem);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* release_head - release a journal head.
|
|
* @c: UBIFS file-system description object
|
|
* @jhead: journal head
|
|
*
|
|
* This function releases journal head @jhead which was locked by
|
|
* the 'make_reservation()' function. It has to be called after each successful
|
|
* 'make_reservation()' invocation.
|
|
*/
|
|
static inline void release_head(struct ubifs_info *c, int jhead)
|
|
{
|
|
mutex_unlock(&c->jheads[jhead].wbuf.io_mutex);
|
|
}
|
|
|
|
/**
|
|
* finish_reservation - finish a reservation.
|
|
* @c: UBIFS file-system description object
|
|
*
|
|
* This function finishes journal space reservation. It must be called after
|
|
* 'make_reservation()'.
|
|
*/
|
|
static void finish_reservation(struct ubifs_info *c)
|
|
{
|
|
up_read(&c->commit_sem);
|
|
}
|
|
|
|
/**
|
|
* get_dent_type - translate VFS inode mode to UBIFS directory entry type.
|
|
* @mode: inode mode
|
|
*/
|
|
static int get_dent_type(int mode)
|
|
{
|
|
switch (mode & S_IFMT) {
|
|
case S_IFREG:
|
|
return UBIFS_ITYPE_REG;
|
|
case S_IFDIR:
|
|
return UBIFS_ITYPE_DIR;
|
|
case S_IFLNK:
|
|
return UBIFS_ITYPE_LNK;
|
|
case S_IFBLK:
|
|
return UBIFS_ITYPE_BLK;
|
|
case S_IFCHR:
|
|
return UBIFS_ITYPE_CHR;
|
|
case S_IFIFO:
|
|
return UBIFS_ITYPE_FIFO;
|
|
case S_IFSOCK:
|
|
return UBIFS_ITYPE_SOCK;
|
|
default:
|
|
BUG();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pack_inode - pack an inode node.
|
|
* @c: UBIFS file-system description object
|
|
* @ino: buffer in which to pack inode node
|
|
* @inode: inode to pack
|
|
* @last: indicates the last node of the group
|
|
*/
|
|
static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino,
|
|
const struct inode *inode, int last)
|
|
{
|
|
int data_len = 0, last_reference = !inode->i_nlink;
|
|
struct ubifs_inode *ui = ubifs_inode(inode);
|
|
|
|
ino->ch.node_type = UBIFS_INO_NODE;
|
|
ino_key_init_flash(c, &ino->key, inode->i_ino);
|
|
ino->creat_sqnum = cpu_to_le64(ui->creat_sqnum);
|
|
ino->atime_sec = cpu_to_le64(inode->i_atime.tv_sec);
|
|
ino->atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec);
|
|
ino->ctime_sec = cpu_to_le64(inode->i_ctime.tv_sec);
|
|
ino->ctime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
|
|
ino->mtime_sec = cpu_to_le64(inode->i_mtime.tv_sec);
|
|
ino->mtime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
|
|
ino->uid = cpu_to_le32(inode->i_uid);
|
|
ino->gid = cpu_to_le32(inode->i_gid);
|
|
ino->mode = cpu_to_le32(inode->i_mode);
|
|
ino->flags = cpu_to_le32(ui->flags);
|
|
ino->size = cpu_to_le64(ui->ui_size);
|
|
ino->nlink = cpu_to_le32(inode->i_nlink);
|
|
ino->compr_type = cpu_to_le16(ui->compr_type);
|
|
ino->data_len = cpu_to_le32(ui->data_len);
|
|
ino->xattr_cnt = cpu_to_le32(ui->xattr_cnt);
|
|
ino->xattr_size = cpu_to_le32(ui->xattr_size);
|
|
ino->xattr_names = cpu_to_le32(ui->xattr_names);
|
|
zero_ino_node_unused(ino);
|
|
|
|
/*
|
|
* Drop the attached data if this is a deletion inode, the data is not
|
|
* needed anymore.
|
|
*/
|
|
if (!last_reference) {
|
|
memcpy(ino->data, ui->data, ui->data_len);
|
|
data_len = ui->data_len;
|
|
}
|
|
|
|
ubifs_prep_grp_node(c, ino, UBIFS_INO_NODE_SZ + data_len, last);
|
|
}
|
|
|
|
/**
|
|
* mark_inode_clean - mark UBIFS inode as clean.
|
|
* @c: UBIFS file-system description object
|
|
* @ui: UBIFS inode to mark as clean
|
|
*
|
|
* This helper function marks UBIFS inode @ui as clean by cleaning the
|
|
* @ui->dirty flag and releasing its budget. Note, VFS may still treat the
|
|
* inode as dirty and try to write it back, but 'ubifs_write_inode()' would
|
|
* just do nothing.
|
|
*/
|
|
static void mark_inode_clean(struct ubifs_info *c, struct ubifs_inode *ui)
|
|
{
|
|
if (ui->dirty)
|
|
ubifs_release_dirty_inode_budget(c, ui);
|
|
ui->dirty = 0;
|
|
}
|
|
|
|
/**
|
|
* ubifs_jnl_update - update inode.
|
|
* @c: UBIFS file-system description object
|
|
* @dir: parent inode or host inode in case of extended attributes
|
|
* @nm: directory entry name
|
|
* @inode: inode to update
|
|
* @deletion: indicates a directory entry deletion i.e unlink or rmdir
|
|
* @xent: non-zero if the directory entry is an extended attribute entry
|
|
*
|
|
* This function updates an inode by writing a directory entry (or extended
|
|
* attribute entry), the inode itself, and the parent directory inode (or the
|
|
* host inode) to the journal.
|
|
*
|
|
* The function writes the host inode @dir last, which is important in case of
|
|
* extended attributes. Indeed, then we guarantee that if the host inode gets
|
|
* synchronized (with 'fsync()'), and the write-buffer it sits in gets flushed,
|
|
* the extended attribute inode gets flushed too. And this is exactly what the
|
|
* user expects - synchronizing the host inode synchronizes its extended
|
|
* attributes. Similarly, this guarantees that if @dir is synchronized, its
|
|
* directory entry corresponding to @nm gets synchronized too.
|
|
*
|
|
* If the inode (@inode) or the parent directory (@dir) are synchronous, this
|
|
* function synchronizes the write-buffer.
|
|
*
|
|
* This function marks the @dir and @inode inodes as clean and returns zero on
|
|
* success. In case of failure, a negative error code is returned.
|
|
*/
|
|
int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir,
|
|
const struct qstr *nm, const struct inode *inode,
|
|
int deletion, int xent)
|
|
{
|
|
int err, dlen, ilen, len, lnum, ino_offs, dent_offs;
|
|
int aligned_dlen, aligned_ilen, sync = IS_DIRSYNC(dir);
|
|
int last_reference = !!(deletion && inode->i_nlink == 0);
|
|
struct ubifs_inode *ui = ubifs_inode(inode);
|
|
struct ubifs_inode *dir_ui = ubifs_inode(dir);
|
|
struct ubifs_dent_node *dent;
|
|
struct ubifs_ino_node *ino;
|
|
union ubifs_key dent_key, ino_key;
|
|
|
|
dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu",
|
|
inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino);
|
|
ubifs_assert(dir_ui->data_len == 0);
|
|
ubifs_assert(mutex_is_locked(&dir_ui->ui_mutex));
|
|
|
|
dlen = UBIFS_DENT_NODE_SZ + nm->len + 1;
|
|
ilen = UBIFS_INO_NODE_SZ;
|
|
|
|
/*
|
|
* If the last reference to the inode is being deleted, then there is
|
|
* no need to attach and write inode data, it is being deleted anyway.
|
|
* And if the inode is being deleted, no need to synchronize
|
|
* write-buffer even if the inode is synchronous.
|
|
*/
|
|
if (!last_reference) {
|
|
ilen += ui->data_len;
|
|
sync |= IS_SYNC(inode);
|
|
}
|
|
|
|
aligned_dlen = ALIGN(dlen, 8);
|
|
aligned_ilen = ALIGN(ilen, 8);
|
|
len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ;
|
|
dent = kmalloc(len, GFP_NOFS);
|
|
if (!dent)
|
|
return -ENOMEM;
|
|
|
|
/* Make reservation before allocating sequence numbers */
|
|
err = make_reservation(c, BASEHD, len);
|
|
if (err)
|
|
goto out_free;
|
|
|
|
if (!xent) {
|
|
dent->ch.node_type = UBIFS_DENT_NODE;
|
|
dent_key_init(c, &dent_key, dir->i_ino, nm);
|
|
} else {
|
|
dent->ch.node_type = UBIFS_XENT_NODE;
|
|
xent_key_init(c, &dent_key, dir->i_ino, nm);
|
|
}
|
|
|
|
key_write(c, &dent_key, dent->key);
|
|
dent->inum = deletion ? 0 : cpu_to_le64(inode->i_ino);
|
|
dent->type = get_dent_type(inode->i_mode);
|
|
dent->nlen = cpu_to_le16(nm->len);
|
|
memcpy(dent->name, nm->name, nm->len);
|
|
dent->name[nm->len] = '\0';
|
|
zero_dent_node_unused(dent);
|
|
ubifs_prep_grp_node(c, dent, dlen, 0);
|
|
|
|
ino = (void *)dent + aligned_dlen;
|
|
pack_inode(c, ino, inode, 0);
|
|
ino = (void *)ino + aligned_ilen;
|
|
pack_inode(c, ino, dir, 1);
|
|
|
|
if (last_reference) {
|
|
err = ubifs_add_orphan(c, inode->i_ino);
|
|
if (err) {
|
|
release_head(c, BASEHD);
|
|
goto out_finish;
|
|
}
|
|
ui->del_cmtno = c->cmt_no;
|
|
}
|
|
|
|
err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync);
|
|
if (err)
|
|
goto out_release;
|
|
if (!sync) {
|
|
struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf;
|
|
|
|
ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino);
|
|
ubifs_wbuf_add_ino_nolock(wbuf, dir->i_ino);
|
|
}
|
|
release_head(c, BASEHD);
|
|
kfree(dent);
|
|
|
|
if (deletion) {
|
|
err = ubifs_tnc_remove_nm(c, &dent_key, nm);
|
|
if (err)
|
|
goto out_ro;
|
|
err = ubifs_add_dirt(c, lnum, dlen);
|
|
} else
|
|
err = ubifs_tnc_add_nm(c, &dent_key, lnum, dent_offs, dlen, nm);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
/*
|
|
* Note, we do not remove the inode from TNC even if the last reference
|
|
* to it has just been deleted, because the inode may still be opened.
|
|
* Instead, the inode has been added to orphan lists and the orphan
|
|
* subsystem will take further care about it.
|
|
*/
|
|
ino_key_init(c, &ino_key, inode->i_ino);
|
|
ino_offs = dent_offs + aligned_dlen;
|
|
err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, ilen);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
ino_key_init(c, &ino_key, dir->i_ino);
|
|
ino_offs += aligned_ilen;
|
|
err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, UBIFS_INO_NODE_SZ);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
finish_reservation(c);
|
|
spin_lock(&ui->ui_lock);
|
|
ui->synced_i_size = ui->ui_size;
|
|
spin_unlock(&ui->ui_lock);
|
|
mark_inode_clean(c, ui);
|
|
mark_inode_clean(c, dir_ui);
|
|
return 0;
|
|
|
|
out_finish:
|
|
finish_reservation(c);
|
|
out_free:
|
|
kfree(dent);
|
|
return err;
|
|
|
|
out_release:
|
|
release_head(c, BASEHD);
|
|
out_ro:
|
|
ubifs_ro_mode(c, err);
|
|
if (last_reference)
|
|
ubifs_delete_orphan(c, inode->i_ino);
|
|
finish_reservation(c);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ubifs_jnl_write_data - write a data node to the journal.
|
|
* @c: UBIFS file-system description object
|
|
* @inode: inode the data node belongs to
|
|
* @key: node key
|
|
* @buf: buffer to write
|
|
* @len: data length (must not exceed %UBIFS_BLOCK_SIZE)
|
|
*
|
|
* This function writes a data node to the journal. Returns %0 if the data node
|
|
* was successfully written, and a negative error code in case of failure.
|
|
*/
|
|
int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode,
|
|
const union ubifs_key *key, const void *buf, int len)
|
|
{
|
|
struct ubifs_data_node *data;
|
|
int err, lnum, offs, compr_type, out_len;
|
|
int dlen = UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE * WORST_COMPR_FACTOR;
|
|
struct ubifs_inode *ui = ubifs_inode(inode);
|
|
|
|
dbg_jnl("ino %lu, blk %u, len %d, key %s",
|
|
(unsigned long)key_inum(c, key), key_block(c, key), len,
|
|
DBGKEY(key));
|
|
ubifs_assert(len <= UBIFS_BLOCK_SIZE);
|
|
|
|
data = kmalloc(dlen, GFP_NOFS);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->ch.node_type = UBIFS_DATA_NODE;
|
|
key_write(c, key, &data->key);
|
|
data->size = cpu_to_le32(len);
|
|
zero_data_node_unused(data);
|
|
|
|
if (!(ui->flags & UBIFS_COMPR_FL))
|
|
/* Compression is disabled for this inode */
|
|
compr_type = UBIFS_COMPR_NONE;
|
|
else
|
|
compr_type = ui->compr_type;
|
|
|
|
out_len = dlen - UBIFS_DATA_NODE_SZ;
|
|
ubifs_compress(buf, len, &data->data, &out_len, &compr_type);
|
|
ubifs_assert(out_len <= UBIFS_BLOCK_SIZE);
|
|
|
|
dlen = UBIFS_DATA_NODE_SZ + out_len;
|
|
data->compr_type = cpu_to_le16(compr_type);
|
|
|
|
/* Make reservation before allocating sequence numbers */
|
|
err = make_reservation(c, DATAHD, dlen);
|
|
if (err)
|
|
goto out_free;
|
|
|
|
err = write_node(c, DATAHD, data, dlen, &lnum, &offs);
|
|
if (err)
|
|
goto out_release;
|
|
ubifs_wbuf_add_ino_nolock(&c->jheads[DATAHD].wbuf, key_inum(c, key));
|
|
release_head(c, DATAHD);
|
|
|
|
err = ubifs_tnc_add(c, key, lnum, offs, dlen);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
finish_reservation(c);
|
|
kfree(data);
|
|
return 0;
|
|
|
|
out_release:
|
|
release_head(c, DATAHD);
|
|
out_ro:
|
|
ubifs_ro_mode(c, err);
|
|
finish_reservation(c);
|
|
out_free:
|
|
kfree(data);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ubifs_jnl_write_inode - flush inode to the journal.
|
|
* @c: UBIFS file-system description object
|
|
* @inode: inode to flush
|
|
*
|
|
* This function writes inode @inode to the journal. If the inode is
|
|
* synchronous, it also synchronizes the write-buffer. Returns zero in case of
|
|
* success and a negative error code in case of failure.
|
|
*/
|
|
int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
|
|
{
|
|
int err, lnum, offs;
|
|
struct ubifs_ino_node *ino;
|
|
struct ubifs_inode *ui = ubifs_inode(inode);
|
|
int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink;
|
|
|
|
dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink);
|
|
|
|
/*
|
|
* If the inode is being deleted, do not write the attached data. No
|
|
* need to synchronize the write-buffer either.
|
|
*/
|
|
if (!last_reference) {
|
|
len += ui->data_len;
|
|
sync = IS_SYNC(inode);
|
|
}
|
|
ino = kmalloc(len, GFP_NOFS);
|
|
if (!ino)
|
|
return -ENOMEM;
|
|
|
|
/* Make reservation before allocating sequence numbers */
|
|
err = make_reservation(c, BASEHD, len);
|
|
if (err)
|
|
goto out_free;
|
|
|
|
pack_inode(c, ino, inode, 1);
|
|
err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
|
|
if (err)
|
|
goto out_release;
|
|
if (!sync)
|
|
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf,
|
|
inode->i_ino);
|
|
release_head(c, BASEHD);
|
|
|
|
if (last_reference) {
|
|
err = ubifs_tnc_remove_ino(c, inode->i_ino);
|
|
if (err)
|
|
goto out_ro;
|
|
ubifs_delete_orphan(c, inode->i_ino);
|
|
err = ubifs_add_dirt(c, lnum, len);
|
|
} else {
|
|
union ubifs_key key;
|
|
|
|
ino_key_init(c, &key, inode->i_ino);
|
|
err = ubifs_tnc_add(c, &key, lnum, offs, len);
|
|
}
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
finish_reservation(c);
|
|
spin_lock(&ui->ui_lock);
|
|
ui->synced_i_size = ui->ui_size;
|
|
spin_unlock(&ui->ui_lock);
|
|
kfree(ino);
|
|
return 0;
|
|
|
|
out_release:
|
|
release_head(c, BASEHD);
|
|
out_ro:
|
|
ubifs_ro_mode(c, err);
|
|
finish_reservation(c);
|
|
out_free:
|
|
kfree(ino);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ubifs_jnl_delete_inode - delete an inode.
|
|
* @c: UBIFS file-system description object
|
|
* @inode: inode to delete
|
|
*
|
|
* This function deletes inode @inode which includes removing it from orphans,
|
|
* deleting it from TNC and, in some cases, writing a deletion inode to the
|
|
* journal.
|
|
*
|
|
* When regular file inodes are unlinked or a directory inode is removed, the
|
|
* 'ubifs_jnl_update()' function writes a corresponding deletion inode and
|
|
* direntry to the media, and adds the inode to orphans. After this, when the
|
|
* last reference to this inode has been dropped, this function is called. In
|
|
* general, it has to write one more deletion inode to the media, because if
|
|
* a commit happened between 'ubifs_jnl_update()' and
|
|
* 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal
|
|
* anymore, and in fact it might not be on the flash anymore, because it might
|
|
* have been garbage-collected already. And for optimization reasons UBIFS does
|
|
* not read the orphan area if it has been unmounted cleanly, so it would have
|
|
* no indication in the journal that there is a deleted inode which has to be
|
|
* removed from TNC.
|
|
*
|
|
* However, if there was no commit between 'ubifs_jnl_update()' and
|
|
* 'ubifs_jnl_delete_inode()', then there is no need to write the deletion
|
|
* inode to the media for the second time. And this is quite a typical case.
|
|
*
|
|
* This function returns zero in case of success and a negative error code in
|
|
* case of failure.
|
|
*/
|
|
int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode)
|
|
{
|
|
int err;
|
|
struct ubifs_inode *ui = ubifs_inode(inode);
|
|
|
|
ubifs_assert(inode->i_nlink == 0);
|
|
|
|
if (ui->del_cmtno != c->cmt_no)
|
|
/* A commit happened for sure */
|
|
return ubifs_jnl_write_inode(c, inode);
|
|
|
|
down_read(&c->commit_sem);
|
|
/*
|
|
* Check commit number again, because the first test has been done
|
|
* without @c->commit_sem, so a commit might have happened.
|
|
*/
|
|
if (ui->del_cmtno != c->cmt_no) {
|
|
up_read(&c->commit_sem);
|
|
return ubifs_jnl_write_inode(c, inode);
|
|
}
|
|
|
|
err = ubifs_tnc_remove_ino(c, inode->i_ino);
|
|
if (err)
|
|
ubifs_ro_mode(c, err);
|
|
else
|
|
ubifs_delete_orphan(c, inode->i_ino);
|
|
up_read(&c->commit_sem);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ubifs_jnl_rename - rename a directory entry.
|
|
* @c: UBIFS file-system description object
|
|
* @old_dir: parent inode of directory entry to rename
|
|
* @old_dentry: directory entry to rename
|
|
* @new_dir: parent inode of directory entry to rename
|
|
* @new_dentry: new directory entry (or directory entry to replace)
|
|
* @sync: non-zero if the write-buffer has to be synchronized
|
|
*
|
|
* This function implements the re-name operation which may involve writing up
|
|
* to 3 inodes and 2 directory entries. It marks the written inodes as clean
|
|
* and returns zero on success. In case of failure, a negative error code is
|
|
* returned.
|
|
*/
|
|
int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
|
|
const struct dentry *old_dentry,
|
|
const struct inode *new_dir,
|
|
const struct dentry *new_dentry, int sync)
|
|
{
|
|
void *p;
|
|
union ubifs_key key;
|
|
struct ubifs_dent_node *dent, *dent2;
|
|
int err, dlen1, dlen2, ilen, lnum, offs, len;
|
|
const struct inode *old_inode = old_dentry->d_inode;
|
|
const struct inode *new_inode = new_dentry->d_inode;
|
|
int aligned_dlen1, aligned_dlen2, plen = UBIFS_INO_NODE_SZ;
|
|
int last_reference = !!(new_inode && new_inode->i_nlink == 0);
|
|
int move = (old_dir != new_dir);
|
|
struct ubifs_inode *uninitialized_var(new_ui);
|
|
|
|
dbg_jnl("dent '%.*s' in dir ino %lu to dent '%.*s' in dir ino %lu",
|
|
old_dentry->d_name.len, old_dentry->d_name.name,
|
|
old_dir->i_ino, new_dentry->d_name.len,
|
|
new_dentry->d_name.name, new_dir->i_ino);
|
|
ubifs_assert(ubifs_inode(old_dir)->data_len == 0);
|
|
ubifs_assert(ubifs_inode(new_dir)->data_len == 0);
|
|
ubifs_assert(mutex_is_locked(&ubifs_inode(old_dir)->ui_mutex));
|
|
ubifs_assert(mutex_is_locked(&ubifs_inode(new_dir)->ui_mutex));
|
|
|
|
dlen1 = UBIFS_DENT_NODE_SZ + new_dentry->d_name.len + 1;
|
|
dlen2 = UBIFS_DENT_NODE_SZ + old_dentry->d_name.len + 1;
|
|
if (new_inode) {
|
|
new_ui = ubifs_inode(new_inode);
|
|
ubifs_assert(mutex_is_locked(&new_ui->ui_mutex));
|
|
ilen = UBIFS_INO_NODE_SZ;
|
|
if (!last_reference)
|
|
ilen += new_ui->data_len;
|
|
} else
|
|
ilen = 0;
|
|
|
|
aligned_dlen1 = ALIGN(dlen1, 8);
|
|
aligned_dlen2 = ALIGN(dlen2, 8);
|
|
len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8);
|
|
if (old_dir != new_dir)
|
|
len += plen;
|
|
dent = kmalloc(len, GFP_NOFS);
|
|
if (!dent)
|
|
return -ENOMEM;
|
|
|
|
/* Make reservation before allocating sequence numbers */
|
|
err = make_reservation(c, BASEHD, len);
|
|
if (err)
|
|
goto out_free;
|
|
|
|
/* Make new dent */
|
|
dent->ch.node_type = UBIFS_DENT_NODE;
|
|
dent_key_init_flash(c, &dent->key, new_dir->i_ino, &new_dentry->d_name);
|
|
dent->inum = cpu_to_le64(old_inode->i_ino);
|
|
dent->type = get_dent_type(old_inode->i_mode);
|
|
dent->nlen = cpu_to_le16(new_dentry->d_name.len);
|
|
memcpy(dent->name, new_dentry->d_name.name, new_dentry->d_name.len);
|
|
dent->name[new_dentry->d_name.len] = '\0';
|
|
zero_dent_node_unused(dent);
|
|
ubifs_prep_grp_node(c, dent, dlen1, 0);
|
|
|
|
/* Make deletion dent */
|
|
dent2 = (void *)dent + aligned_dlen1;
|
|
dent2->ch.node_type = UBIFS_DENT_NODE;
|
|
dent_key_init_flash(c, &dent2->key, old_dir->i_ino,
|
|
&old_dentry->d_name);
|
|
dent2->inum = 0;
|
|
dent2->type = DT_UNKNOWN;
|
|
dent2->nlen = cpu_to_le16(old_dentry->d_name.len);
|
|
memcpy(dent2->name, old_dentry->d_name.name, old_dentry->d_name.len);
|
|
dent2->name[old_dentry->d_name.len] = '\0';
|
|
zero_dent_node_unused(dent2);
|
|
ubifs_prep_grp_node(c, dent2, dlen2, 0);
|
|
|
|
p = (void *)dent2 + aligned_dlen2;
|
|
if (new_inode) {
|
|
pack_inode(c, p, new_inode, 0);
|
|
p += ALIGN(ilen, 8);
|
|
}
|
|
|
|
if (!move)
|
|
pack_inode(c, p, old_dir, 1);
|
|
else {
|
|
pack_inode(c, p, old_dir, 0);
|
|
p += ALIGN(plen, 8);
|
|
pack_inode(c, p, new_dir, 1);
|
|
}
|
|
|
|
if (last_reference) {
|
|
err = ubifs_add_orphan(c, new_inode->i_ino);
|
|
if (err) {
|
|
release_head(c, BASEHD);
|
|
goto out_finish;
|
|
}
|
|
new_ui->del_cmtno = c->cmt_no;
|
|
}
|
|
|
|
err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync);
|
|
if (err)
|
|
goto out_release;
|
|
if (!sync) {
|
|
struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf;
|
|
|
|
ubifs_wbuf_add_ino_nolock(wbuf, new_dir->i_ino);
|
|
ubifs_wbuf_add_ino_nolock(wbuf, old_dir->i_ino);
|
|
if (new_inode)
|
|
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf,
|
|
new_inode->i_ino);
|
|
}
|
|
release_head(c, BASEHD);
|
|
|
|
dent_key_init(c, &key, new_dir->i_ino, &new_dentry->d_name);
|
|
err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen1, &new_dentry->d_name);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
err = ubifs_add_dirt(c, lnum, dlen2);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name);
|
|
err = ubifs_tnc_remove_nm(c, &key, &old_dentry->d_name);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
offs += aligned_dlen1 + aligned_dlen2;
|
|
if (new_inode) {
|
|
ino_key_init(c, &key, new_inode->i_ino);
|
|
err = ubifs_tnc_add(c, &key, lnum, offs, ilen);
|
|
if (err)
|
|
goto out_ro;
|
|
offs += ALIGN(ilen, 8);
|
|
}
|
|
|
|
ino_key_init(c, &key, old_dir->i_ino);
|
|
err = ubifs_tnc_add(c, &key, lnum, offs, plen);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
if (old_dir != new_dir) {
|
|
offs += ALIGN(plen, 8);
|
|
ino_key_init(c, &key, new_dir->i_ino);
|
|
err = ubifs_tnc_add(c, &key, lnum, offs, plen);
|
|
if (err)
|
|
goto out_ro;
|
|
}
|
|
|
|
finish_reservation(c);
|
|
if (new_inode) {
|
|
mark_inode_clean(c, new_ui);
|
|
spin_lock(&new_ui->ui_lock);
|
|
new_ui->synced_i_size = new_ui->ui_size;
|
|
spin_unlock(&new_ui->ui_lock);
|
|
}
|
|
mark_inode_clean(c, ubifs_inode(old_dir));
|
|
if (move)
|
|
mark_inode_clean(c, ubifs_inode(new_dir));
|
|
kfree(dent);
|
|
return 0;
|
|
|
|
out_release:
|
|
release_head(c, BASEHD);
|
|
out_ro:
|
|
ubifs_ro_mode(c, err);
|
|
if (last_reference)
|
|
ubifs_delete_orphan(c, new_inode->i_ino);
|
|
out_finish:
|
|
finish_reservation(c);
|
|
out_free:
|
|
kfree(dent);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* recomp_data_node - re-compress a truncated data node.
|
|
* @dn: data node to re-compress
|
|
* @new_len: new length
|
|
*
|
|
* This function is used when an inode is truncated and the last data node of
|
|
* the inode has to be re-compressed and re-written.
|
|
*/
|
|
static int recomp_data_node(struct ubifs_data_node *dn, int *new_len)
|
|
{
|
|
void *buf;
|
|
int err, len, compr_type, out_len;
|
|
|
|
out_len = le32_to_cpu(dn->size);
|
|
buf = kmalloc(out_len * WORST_COMPR_FACTOR, GFP_NOFS);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
len = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ;
|
|
compr_type = le16_to_cpu(dn->compr_type);
|
|
err = ubifs_decompress(&dn->data, len, buf, &out_len, compr_type);
|
|
if (err)
|
|
goto out;
|
|
|
|
ubifs_compress(buf, *new_len, &dn->data, &out_len, &compr_type);
|
|
ubifs_assert(out_len <= UBIFS_BLOCK_SIZE);
|
|
dn->compr_type = cpu_to_le16(compr_type);
|
|
dn->size = cpu_to_le32(*new_len);
|
|
*new_len = UBIFS_DATA_NODE_SZ + out_len;
|
|
out:
|
|
kfree(buf);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ubifs_jnl_truncate - update the journal for a truncation.
|
|
* @c: UBIFS file-system description object
|
|
* @inode: inode to truncate
|
|
* @old_size: old size
|
|
* @new_size: new size
|
|
*
|
|
* When the size of a file decreases due to truncation, a truncation node is
|
|
* written, the journal tree is updated, and the last data block is re-written
|
|
* if it has been affected. The inode is also updated in order to synchronize
|
|
* the new inode size.
|
|
*
|
|
* This function marks the inode as clean and returns zero on success. In case
|
|
* of failure, a negative error code is returned.
|
|
*/
|
|
int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode,
|
|
loff_t old_size, loff_t new_size)
|
|
{
|
|
union ubifs_key key, to_key;
|
|
struct ubifs_ino_node *ino;
|
|
struct ubifs_trun_node *trun;
|
|
struct ubifs_data_node *uninitialized_var(dn);
|
|
int err, dlen, len, lnum, offs, bit, sz, sync = IS_SYNC(inode);
|
|
struct ubifs_inode *ui = ubifs_inode(inode);
|
|
ino_t inum = inode->i_ino;
|
|
unsigned int blk;
|
|
|
|
dbg_jnl("ino %lu, size %lld -> %lld",
|
|
(unsigned long)inum, old_size, new_size);
|
|
ubifs_assert(!ui->data_len);
|
|
ubifs_assert(S_ISREG(inode->i_mode));
|
|
ubifs_assert(mutex_is_locked(&ui->ui_mutex));
|
|
|
|
sz = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ +
|
|
UBIFS_MAX_DATA_NODE_SZ * WORST_COMPR_FACTOR;
|
|
ino = kmalloc(sz, GFP_NOFS);
|
|
if (!ino)
|
|
return -ENOMEM;
|
|
|
|
trun = (void *)ino + UBIFS_INO_NODE_SZ;
|
|
trun->ch.node_type = UBIFS_TRUN_NODE;
|
|
trun->inum = cpu_to_le32(inum);
|
|
trun->old_size = cpu_to_le64(old_size);
|
|
trun->new_size = cpu_to_le64(new_size);
|
|
zero_trun_node_unused(trun);
|
|
|
|
dlen = new_size & (UBIFS_BLOCK_SIZE - 1);
|
|
if (dlen) {
|
|
/* Get last data block so it can be truncated */
|
|
dn = (void *)trun + UBIFS_TRUN_NODE_SZ;
|
|
blk = new_size >> UBIFS_BLOCK_SHIFT;
|
|
data_key_init(c, &key, inum, blk);
|
|
dbg_jnl("last block key %s", DBGKEY(&key));
|
|
err = ubifs_tnc_lookup(c, &key, dn);
|
|
if (err == -ENOENT)
|
|
dlen = 0; /* Not found (so it is a hole) */
|
|
else if (err)
|
|
goto out_free;
|
|
else {
|
|
if (le32_to_cpu(dn->size) <= dlen)
|
|
dlen = 0; /* Nothing to do */
|
|
else {
|
|
int compr_type = le16_to_cpu(dn->compr_type);
|
|
|
|
if (compr_type != UBIFS_COMPR_NONE) {
|
|
err = recomp_data_node(dn, &dlen);
|
|
if (err)
|
|
goto out_free;
|
|
} else {
|
|
dn->size = cpu_to_le32(dlen);
|
|
dlen += UBIFS_DATA_NODE_SZ;
|
|
}
|
|
zero_data_node_unused(dn);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Must make reservation before allocating sequence numbers */
|
|
len = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ;
|
|
if (dlen)
|
|
len += dlen;
|
|
err = make_reservation(c, BASEHD, len);
|
|
if (err)
|
|
goto out_free;
|
|
|
|
pack_inode(c, ino, inode, 0);
|
|
ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1);
|
|
if (dlen)
|
|
ubifs_prep_grp_node(c, dn, dlen, 1);
|
|
|
|
err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
|
|
if (err)
|
|
goto out_release;
|
|
if (!sync)
|
|
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, inum);
|
|
release_head(c, BASEHD);
|
|
|
|
if (dlen) {
|
|
sz = offs + UBIFS_INO_NODE_SZ + UBIFS_TRUN_NODE_SZ;
|
|
err = ubifs_tnc_add(c, &key, lnum, sz, dlen);
|
|
if (err)
|
|
goto out_ro;
|
|
}
|
|
|
|
ino_key_init(c, &key, inum);
|
|
err = ubifs_tnc_add(c, &key, lnum, offs, UBIFS_INO_NODE_SZ);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
err = ubifs_add_dirt(c, lnum, UBIFS_TRUN_NODE_SZ);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
bit = new_size & (UBIFS_BLOCK_SIZE - 1);
|
|
blk = (new_size >> UBIFS_BLOCK_SHIFT) + (bit ? 1 : 0);
|
|
data_key_init(c, &key, inum, blk);
|
|
|
|
bit = old_size & (UBIFS_BLOCK_SIZE - 1);
|
|
blk = (old_size >> UBIFS_BLOCK_SHIFT) - (bit ? 0 : 1);
|
|
data_key_init(c, &to_key, inum, blk);
|
|
|
|
err = ubifs_tnc_remove_range(c, &key, &to_key);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
finish_reservation(c);
|
|
spin_lock(&ui->ui_lock);
|
|
ui->synced_i_size = ui->ui_size;
|
|
spin_unlock(&ui->ui_lock);
|
|
mark_inode_clean(c, ui);
|
|
kfree(ino);
|
|
return 0;
|
|
|
|
out_release:
|
|
release_head(c, BASEHD);
|
|
out_ro:
|
|
ubifs_ro_mode(c, err);
|
|
finish_reservation(c);
|
|
out_free:
|
|
kfree(ino);
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_UBIFS_FS_XATTR
|
|
|
|
/**
|
|
* ubifs_jnl_delete_xattr - delete an extended attribute.
|
|
* @c: UBIFS file-system description object
|
|
* @host: host inode
|
|
* @inode: extended attribute inode
|
|
* @nm: extended attribute entry name
|
|
*
|
|
* This function delete an extended attribute which is very similar to
|
|
* un-linking regular files - it writes a deletion xentry, a deletion inode and
|
|
* updates the target inode. Returns zero in case of success and a negative
|
|
* error code in case of failure.
|
|
*/
|
|
int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host,
|
|
const struct inode *inode, const struct qstr *nm)
|
|
{
|
|
int err, xlen, hlen, len, lnum, xent_offs, aligned_xlen;
|
|
struct ubifs_dent_node *xent;
|
|
struct ubifs_ino_node *ino;
|
|
union ubifs_key xent_key, key1, key2;
|
|
int sync = IS_DIRSYNC(host);
|
|
struct ubifs_inode *host_ui = ubifs_inode(host);
|
|
|
|
dbg_jnl("host %lu, xattr ino %lu, name '%s', data len %d",
|
|
host->i_ino, inode->i_ino, nm->name,
|
|
ubifs_inode(inode)->data_len);
|
|
ubifs_assert(inode->i_nlink == 0);
|
|
ubifs_assert(mutex_is_locked(&host_ui->ui_mutex));
|
|
|
|
/*
|
|
* Since we are deleting the inode, we do not bother to attach any data
|
|
* to it and assume its length is %UBIFS_INO_NODE_SZ.
|
|
*/
|
|
xlen = UBIFS_DENT_NODE_SZ + nm->len + 1;
|
|
aligned_xlen = ALIGN(xlen, 8);
|
|
hlen = host_ui->data_len + UBIFS_INO_NODE_SZ;
|
|
len = aligned_xlen + UBIFS_INO_NODE_SZ + ALIGN(hlen, 8);
|
|
|
|
xent = kmalloc(len, GFP_NOFS);
|
|
if (!xent)
|
|
return -ENOMEM;
|
|
|
|
/* Make reservation before allocating sequence numbers */
|
|
err = make_reservation(c, BASEHD, len);
|
|
if (err) {
|
|
kfree(xent);
|
|
return err;
|
|
}
|
|
|
|
xent->ch.node_type = UBIFS_XENT_NODE;
|
|
xent_key_init(c, &xent_key, host->i_ino, nm);
|
|
key_write(c, &xent_key, xent->key);
|
|
xent->inum = 0;
|
|
xent->type = get_dent_type(inode->i_mode);
|
|
xent->nlen = cpu_to_le16(nm->len);
|
|
memcpy(xent->name, nm->name, nm->len);
|
|
xent->name[nm->len] = '\0';
|
|
zero_dent_node_unused(xent);
|
|
ubifs_prep_grp_node(c, xent, xlen, 0);
|
|
|
|
ino = (void *)xent + aligned_xlen;
|
|
pack_inode(c, ino, inode, 0);
|
|
ino = (void *)ino + UBIFS_INO_NODE_SZ;
|
|
pack_inode(c, ino, host, 1);
|
|
|
|
err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync);
|
|
if (!sync && !err)
|
|
ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, host->i_ino);
|
|
release_head(c, BASEHD);
|
|
kfree(xent);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
/* Remove the extended attribute entry from TNC */
|
|
err = ubifs_tnc_remove_nm(c, &xent_key, nm);
|
|
if (err)
|
|
goto out_ro;
|
|
err = ubifs_add_dirt(c, lnum, xlen);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
/*
|
|
* Remove all nodes belonging to the extended attribute inode from TNC.
|
|
* Well, there actually must be only one node - the inode itself.
|
|
*/
|
|
lowest_ino_key(c, &key1, inode->i_ino);
|
|
highest_ino_key(c, &key2, inode->i_ino);
|
|
err = ubifs_tnc_remove_range(c, &key1, &key2);
|
|
if (err)
|
|
goto out_ro;
|
|
err = ubifs_add_dirt(c, lnum, UBIFS_INO_NODE_SZ);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
/* And update TNC with the new host inode position */
|
|
ino_key_init(c, &key1, host->i_ino);
|
|
err = ubifs_tnc_add(c, &key1, lnum, xent_offs + len - hlen, hlen);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
finish_reservation(c);
|
|
spin_lock(&host_ui->ui_lock);
|
|
host_ui->synced_i_size = host_ui->ui_size;
|
|
spin_unlock(&host_ui->ui_lock);
|
|
mark_inode_clean(c, host_ui);
|
|
return 0;
|
|
|
|
out_ro:
|
|
ubifs_ro_mode(c, err);
|
|
finish_reservation(c);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ubifs_jnl_change_xattr - change an extended attribute.
|
|
* @c: UBIFS file-system description object
|
|
* @inode: extended attribute inode
|
|
* @host: host inode
|
|
*
|
|
* This function writes the updated version of an extended attribute inode and
|
|
* the host inode to the journal (to the base head). The host inode is written
|
|
* after the extended attribute inode in order to guarantee that the extended
|
|
* attribute will be flushed when the inode is synchronized by 'fsync()' and
|
|
* consequently, the write-buffer is synchronized. This function returns zero
|
|
* in case of success and a negative error code in case of failure.
|
|
*/
|
|
int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode,
|
|
const struct inode *host)
|
|
{
|
|
int err, len1, len2, aligned_len, aligned_len1, lnum, offs;
|
|
struct ubifs_inode *host_ui = ubifs_inode(host);
|
|
struct ubifs_ino_node *ino;
|
|
union ubifs_key key;
|
|
int sync = IS_DIRSYNC(host);
|
|
|
|
dbg_jnl("ino %lu, ino %lu", host->i_ino, inode->i_ino);
|
|
ubifs_assert(host->i_nlink > 0);
|
|
ubifs_assert(inode->i_nlink > 0);
|
|
ubifs_assert(mutex_is_locked(&host_ui->ui_mutex));
|
|
|
|
len1 = UBIFS_INO_NODE_SZ + host_ui->data_len;
|
|
len2 = UBIFS_INO_NODE_SZ + ubifs_inode(inode)->data_len;
|
|
aligned_len1 = ALIGN(len1, 8);
|
|
aligned_len = aligned_len1 + ALIGN(len2, 8);
|
|
|
|
ino = kmalloc(aligned_len, GFP_NOFS);
|
|
if (!ino)
|
|
return -ENOMEM;
|
|
|
|
/* Make reservation before allocating sequence numbers */
|
|
err = make_reservation(c, BASEHD, aligned_len);
|
|
if (err)
|
|
goto out_free;
|
|
|
|
pack_inode(c, ino, host, 0);
|
|
pack_inode(c, (void *)ino + aligned_len1, inode, 1);
|
|
|
|
err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0);
|
|
if (!sync && !err) {
|
|
struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf;
|
|
|
|
ubifs_wbuf_add_ino_nolock(wbuf, host->i_ino);
|
|
ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino);
|
|
}
|
|
release_head(c, BASEHD);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
ino_key_init(c, &key, host->i_ino);
|
|
err = ubifs_tnc_add(c, &key, lnum, offs, len1);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
ino_key_init(c, &key, inode->i_ino);
|
|
err = ubifs_tnc_add(c, &key, lnum, offs + aligned_len1, len2);
|
|
if (err)
|
|
goto out_ro;
|
|
|
|
finish_reservation(c);
|
|
spin_lock(&host_ui->ui_lock);
|
|
host_ui->synced_i_size = host_ui->ui_size;
|
|
spin_unlock(&host_ui->ui_lock);
|
|
mark_inode_clean(c, host_ui);
|
|
kfree(ino);
|
|
return 0;
|
|
|
|
out_ro:
|
|
ubifs_ro_mode(c, err);
|
|
finish_reservation(c);
|
|
out_free:
|
|
kfree(ino);
|
|
return err;
|
|
}
|
|
|
|
#endif /* CONFIG_UBIFS_FS_XATTR */
|