OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
e746bf730a
linux/arch/sparc/lib/NG2memcpy.S
Babu Moger 0ae2d26ffe arch/sparc: Avoid DCTI Couples 
Avoid un-intended DCTI Couples. Use of DCTI couples is deprecated.
Also address the "Programming Note" for optimal performance.

Here is the complete text from Oracle SPARC Architecture Specs.

6.3.4.7 DCTI Couples
"A delayed control transfer instruction (DCTI) in the delay slot of
another DCTI is referred to as a “DCTI couple”. The use of DCTI couples
is deprecated in the Oracle SPARC Architecture; no new software should
place a DCTI in the delay slot of another DCTI, because on future Oracle
SPARC Architecture implementations DCTI couples may execute either
slowly or differently than the programmer assumes it will.

SPARC V8 and SPARC V9 Compatibility Note
The SPARC V8 architecture left behavior undefined for a DCTI couple. The
SPARC V9 architecture defined behavior in that case, but as of
UltraSPARC Architecture 2005, use of DCTI couples was deprecated.
Software should not expect high performance from DCTI couples, and
performance of DCTI couples should be expected to decline further in
future processors.

Programming Note
As noted in TABLE 6-5 on page 115, an annulled branch-always
(branch-always with a = 1) instruction is not architecturally a DCTI.
However, since not all implementations make that distinction, for
optimal performance, a DCTI should not be placed in the instruction word
immediately following an annulled branch-always instruction (BA,A or
BPA,A)."

Signed-off-by: Babu Moger <babu.moger@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-27 21:51:40 -07:00

594 lines
15 KiB
ArmAsm
Raw Blame History

/* NG2memcpy.S: Niagara-2 optimized memcpy.
*
* Copyright (C) 2007 David S. Miller (davem@davemloft.net)
*/
#ifdef __KERNEL__
#include <linux/linkage.h>
#include <asm/visasm.h>
#include <asm/asi.h>
#define GLOBAL_SPARE %g7
#else
#define ASI_PNF 0x82
#define ASI_BLK_P 0xf0
#define ASI_BLK_INIT_QUAD_LDD_P 0xe2
#define FPRS_FEF 0x04
#ifdef MEMCPY_DEBUG
#define VISEntryHalf rd %fprs, %o5; wr %g0, FPRS_FEF, %fprs; \
clr %g1; clr %g2; clr %g3; clr %g5; subcc %g0, %g0, %g0;
#define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs
#else
#define VISEntryHalf rd %fprs, %o5; wr %g0, FPRS_FEF, %fprs
#define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs
#endif
#define GLOBAL_SPARE %g5
#endif
#ifndef STORE_ASI
#ifndef SIMULATE_NIAGARA_ON_NON_NIAGARA
#define STORE_ASI ASI_BLK_INIT_QUAD_LDD_P
#else
#define STORE_ASI 0x80 /* ASI_P */
#endif
#endif
#ifndef EX_LD
#define EX_LD(x,y) x
#endif
#ifndef EX_LD_FP
#define EX_LD_FP(x,y) x
#endif
#ifndef EX_ST
#define EX_ST(x,y) x
#endif
#ifndef EX_ST_FP
#define EX_ST_FP(x,y) x
#endif
#ifndef LOAD
#define LOAD(type,addr,dest) type [addr], dest
#endif
#ifndef LOAD_BLK
#define LOAD_BLK(addr,dest) ldda [addr] ASI_BLK_P, dest
#endif
#ifndef STORE
#ifndef MEMCPY_DEBUG
#define STORE(type,src,addr) type src, [addr]
#else
#define STORE(type,src,addr) type##a src, [addr] 0x80
#endif
#endif
#ifndef STORE_BLK
#define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_P
#endif
#ifndef STORE_INIT
#define STORE_INIT(src,addr) stxa src, [addr] STORE_ASI
#endif
#ifndef FUNC_NAME
#define FUNC_NAME NG2memcpy
#endif
#ifndef PREAMBLE
#define PREAMBLE
#endif
#ifndef XCC
#define XCC xcc
#endif
#define FREG_FROB(x0, x1, x2, x3, x4, x5, x6, x7, x8) \
faligndata %x0, %x1, %f0; \
faligndata %x1, %x2, %f2; \
faligndata %x2, %x3, %f4; \
faligndata %x3, %x4, %f6; \
faligndata %x4, %x5, %f8; \
faligndata %x5, %x6, %f10; \
faligndata %x6, %x7, %f12; \
faligndata %x7, %x8, %f14;
#define FREG_MOVE_1(x0) \
fsrc2 %x0, %f0;
#define FREG_MOVE_2(x0, x1) \
fsrc2 %x0, %f0; \
fsrc2 %x1, %f2;
#define FREG_MOVE_3(x0, x1, x2) \
fsrc2 %x0, %f0; \
fsrc2 %x1, %f2; \
fsrc2 %x2, %f4;
#define FREG_MOVE_4(x0, x1, x2, x3) \
fsrc2 %x0, %f0; \
fsrc2 %x1, %f2; \
fsrc2 %x2, %f4; \
fsrc2 %x3, %f6;
#define FREG_MOVE_5(x0, x1, x2, x3, x4) \
fsrc2 %x0, %f0; \
fsrc2 %x1, %f2; \
fsrc2 %x2, %f4; \
fsrc2 %x3, %f6; \
fsrc2 %x4, %f8;
#define FREG_MOVE_6(x0, x1, x2, x3, x4, x5) \
fsrc2 %x0, %f0; \
fsrc2 %x1, %f2; \
fsrc2 %x2, %f4; \
fsrc2 %x3, %f6; \
fsrc2 %x4, %f8; \
fsrc2 %x5, %f10;
#define FREG_MOVE_7(x0, x1, x2, x3, x4, x5, x6) \
fsrc2 %x0, %f0; \
fsrc2 %x1, %f2; \
fsrc2 %x2, %f4; \
fsrc2 %x3, %f6; \
fsrc2 %x4, %f8; \
fsrc2 %x5, %f10; \
fsrc2 %x6, %f12;
#define FREG_MOVE_8(x0, x1, x2, x3, x4, x5, x6, x7) \
fsrc2 %x0, %f0; \
fsrc2 %x1, %f2; \
fsrc2 %x2, %f4; \
fsrc2 %x3, %f6; \
fsrc2 %x4, %f8; \
fsrc2 %x5, %f10; \
fsrc2 %x6, %f12; \
fsrc2 %x7, %f14;
#define FREG_LOAD_1(base, x0) \
EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1)
#define FREG_LOAD_2(base, x0, x1) \
EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1);
#define FREG_LOAD_3(base, x0, x1, x2) \
EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1);
#define FREG_LOAD_4(base, x0, x1, x2, x3) \
EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x18, %x3), NG2_retl_o2_plus_g1);
#define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \
EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x18, %x3), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x20, %x4), NG2_retl_o2_plus_g1);
#define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \
EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x18, %x3), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x20, %x4), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x28, %x5), NG2_retl_o2_plus_g1);
#define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \
EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x18, %x3), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x20, %x4), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x28, %x5), NG2_retl_o2_plus_g1); \
EX_LD_FP(LOAD(ldd, base + 0x30, %x6), NG2_retl_o2_plus_g1);
.register %g2,#scratch
.register %g3,#scratch
.text
#ifndef EX_RETVAL
#define EX_RETVAL(x) x
__restore_fp:
VISExitHalf
__restore_asi:
retl
wr %g0, ASI_AIUS, %asi
ENTRY(NG2_retl_o2)
ba,pt %xcc, __restore_asi
mov %o2, %o0
ENDPROC(NG2_retl_o2)
ENTRY(NG2_retl_o2_plus_1)
ba,pt %xcc, __restore_asi
add %o2, 1, %o0
ENDPROC(NG2_retl_o2_plus_1)
ENTRY(NG2_retl_o2_plus_4)
ba,pt %xcc, __restore_asi
add %o2, 4, %o0
ENDPROC(NG2_retl_o2_plus_4)
ENTRY(NG2_retl_o2_plus_8)
ba,pt %xcc, __restore_asi
add %o2, 8, %o0
ENDPROC(NG2_retl_o2_plus_8)
ENTRY(NG2_retl_o2_plus_o4_plus_1)
add %o4, 1, %o4
ba,pt %xcc, __restore_asi
add %o2, %o4, %o0
ENDPROC(NG2_retl_o2_plus_o4_plus_1)
ENTRY(NG2_retl_o2_plus_o4_plus_8)
add %o4, 8, %o4
ba,pt %xcc, __restore_asi
add %o2, %o4, %o0
ENDPROC(NG2_retl_o2_plus_o4_plus_8)
ENTRY(NG2_retl_o2_plus_o4_plus_16)
add %o4, 16, %o4
ba,pt %xcc, __restore_asi
add %o2, %o4, %o0
ENDPROC(NG2_retl_o2_plus_o4_plus_16)
ENTRY(NG2_retl_o2_plus_g1_fp)
ba,pt %xcc, __restore_fp
add %o2, %g1, %o0
ENDPROC(NG2_retl_o2_plus_g1_fp)
ENTRY(NG2_retl_o2_plus_g1_plus_64_fp)
add %g1, 64, %g1
ba,pt %xcc, __restore_fp
add %o2, %g1, %o0
ENDPROC(NG2_retl_o2_plus_g1_plus_64_fp)
ENTRY(NG2_retl_o2_plus_g1_plus_1)
add %g1, 1, %g1
ba,pt %xcc, __restore_asi
add %o2, %g1, %o0
ENDPROC(NG2_retl_o2_plus_g1_plus_1)
ENTRY(NG2_retl_o2_and_7_plus_o4)
and %o2, 7, %o2
ba,pt %xcc, __restore_asi
add %o2, %o4, %o0
ENDPROC(NG2_retl_o2_and_7_plus_o4)
ENTRY(NG2_retl_o2_and_7_plus_o4_plus_8)
and %o2, 7, %o2
add %o4, 8, %o4
ba,pt %xcc, __restore_asi
add %o2, %o4, %o0
ENDPROC(NG2_retl_o2_and_7_plus_o4_plus_8)
#endif
.align 64
.globl FUNC_NAME
.type FUNC_NAME,#function
FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
srlx %o2, 31, %g2
cmp %g2, 0
tne %xcc, 5
PREAMBLE
mov %o0, %o3
cmp %o2, 0
be,pn %XCC, 85f
or %o0, %o1, GLOBAL_SPARE
cmp %o2, 16
blu,a,pn %XCC, 80f
or GLOBAL_SPARE, %o2, GLOBAL_SPARE
/* 2 blocks (128 bytes) is the minimum we can do the block
* copy with. We need to ensure that we'll iterate at least
* once in the block copy loop. At worst we'll need to align
* the destination to a 64-byte boundary which can chew up
* to (64 - 1) bytes from the length before we perform the
* block copy loop.
*
* However, the cut-off point, performance wise, is around
* 4 64-byte blocks.
*/
cmp %o2, (4 * 64)
blu,pt %XCC, 75f
andcc GLOBAL_SPARE, 0x7, %g0
/* %o0: dst
* %o1: src
* %o2: len (known to be >= 128)
*
* The block copy loops can use %o4, %g2, %g3 as
* temporaries while copying the data. %o5 must
* be preserved between VISEntryHalf and VISExitHalf
*/
LOAD(prefetch, %o1 + 0x000, #one_read)
LOAD(prefetch, %o1 + 0x040, #one_read)
LOAD(prefetch, %o1 + 0x080, #one_read)
/* Align destination on 64-byte boundary. */
andcc %o0, (64 - 1), %o4
be,pt %XCC, 2f
sub %o4, 64, %o4
sub %g0, %o4, %o4 ! bytes to align dst
sub %o2, %o4, %o2
1: subcc %o4, 1, %o4
EX_LD(LOAD(ldub, %o1, %g1), NG2_retl_o2_plus_o4_plus_1)
EX_ST(STORE(stb, %g1, %o0), NG2_retl_o2_plus_o4_plus_1)
add %o1, 1, %o1
bne,pt %XCC, 1b
add %o0, 1, %o0
2:
/* Clobbers o5/g1/g2/g3/g7/icc/xcc. We must preserve
* o5 from here until we hit VISExitHalf.
*/
VISEntryHalf
membar #Sync
alignaddr %o1, %g0, %g0
add %o1, (64 - 1), %o4
andn %o4, (64 - 1), %o4
andn %o2, (64 - 1), %g1
sub %o2, %g1, %o2
and %o1, (64 - 1), %g2
add %o1, %g1, %o1
sub %o0, %o4, %g3
brz,pt %g2, 190f
cmp %g2, 32
blu,a 5f
cmp %g2, 16
cmp %g2, 48
blu,a 4f
cmp %g2, 40
cmp %g2, 56
blu 170f
nop
ba,a,pt %xcc, 180f
nop
4: /* 32 <= low bits < 48 */
blu 150f
nop
ba,a,pt %xcc, 160f
nop
5: /* 0 < low bits < 32 */
blu,a 6f
cmp %g2, 8
cmp %g2, 24
blu 130f
nop
ba,a,pt %xcc, 140f
nop
6: /* 0 < low bits < 16 */
bgeu 120f
nop
/* fall through for 0 < low bits < 8 */
110: sub %o4, 64, %g2
EX_LD_FP(LOAD_BLK(%g2, %f0), NG2_retl_o2_plus_g1)
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1)
FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1)
FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
ba,pt %xcc, 195f
nop
120: sub %o4, 56, %g2
FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12)
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1)
FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1)
FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
ba,pt %xcc, 195f
nop
130: sub %o4, 48, %g2
FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10)
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1)
FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1)
FREG_MOVE_6(f20, f22, f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
ba,pt %xcc, 195f
nop
140: sub %o4, 40, %g2
FREG_LOAD_5(%g2, f0, f2, f4, f6, f8)
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1)
FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1)
FREG_MOVE_5(f22, f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
ba,pt %xcc, 195f
nop
150: sub %o4, 32, %g2
FREG_LOAD_4(%g2, f0, f2, f4, f6)
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1)
FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1)
FREG_MOVE_4(f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
ba,pt %xcc, 195f
nop
160: sub %o4, 24, %g2
FREG_LOAD_3(%g2, f0, f2, f4)
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1)
FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1)
FREG_MOVE_3(f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
ba,pt %xcc, 195f
nop
170: sub %o4, 16, %g2
FREG_LOAD_2(%g2, f0, f2)
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1)
FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1)
FREG_MOVE_2(f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
ba,pt %xcc, 195f
nop
180: sub %o4, 8, %g2
FREG_LOAD_1(%g2, f0)
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1)
FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1)
FREG_MOVE_1(f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
ba,pt %xcc, 195f
nop
190:
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1)
subcc %g1, 64, %g1
EX_LD_FP(LOAD_BLK(%o4, %f0), NG2_retl_o2_plus_g1_plus_64)
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1_plus_64)
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)
195:
add %o4, %g3, %o0
membar #Sync
VISExitHalf
/* %o2 contains any final bytes still needed to be copied
* over. If anything is left, we copy it one byte at a time.
*/
brz,pt %o2, 85f
sub %o0, %o1, GLOBAL_SPARE
ba,a,pt %XCC, 90f
nop
.align 64
75: /* 16 < len <= 64 */
bne,pn %XCC, 75f
sub %o0, %o1, GLOBAL_SPARE
72:
andn %o2, 0xf, %o4
and %o2, 0xf, %o2
1: subcc %o4, 0x10, %o4
EX_LD(LOAD(ldx, %o1, %o5), NG2_retl_o2_plus_o4_plus_16)
add %o1, 0x08, %o1
EX_LD(LOAD(ldx, %o1, %g1), NG2_retl_o2_plus_o4_plus_16)
sub %o1, 0x08, %o1
EX_ST(STORE(stx, %o5, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_o4_plus_16)
add %o1, 0x8, %o1
EX_ST(STORE(stx, %g1, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_o4_plus_8)
bgu,pt %XCC, 1b
add %o1, 0x8, %o1
73: andcc %o2, 0x8, %g0
be,pt %XCC, 1f
nop
sub %o2, 0x8, %o2
EX_LD(LOAD(ldx, %o1, %o5), NG2_retl_o2_plus_8)
EX_ST(STORE(stx, %o5, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_8)
add %o1, 0x8, %o1
1: andcc %o2, 0x4, %g0
be,pt %XCC, 1f
nop
sub %o2, 0x4, %o2
EX_LD(LOAD(lduw, %o1, %o5), NG2_retl_o2_plus_4)
EX_ST(STORE(stw, %o5, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_4)
add %o1, 0x4, %o1
1: cmp %o2, 0
be,pt %XCC, 85f
nop
ba,pt %xcc, 90f
nop
75:
andcc %o0, 0x7, %g1
sub %g1, 0x8, %g1
be,pn %icc, 2f
sub %g0, %g1, %g1
sub %o2, %g1, %o2
1: subcc %g1, 1, %g1
EX_LD(LOAD(ldub, %o1, %o5), NG2_retl_o2_plus_g1_plus_1)
EX_ST(STORE(stb, %o5, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_g1_plus_1)
bgu,pt %icc, 1b
add %o1, 1, %o1
2: add %o1, GLOBAL_SPARE, %o0
andcc %o1, 0x7, %g1
bne,pt %icc, 8f
sll %g1, 3, %g1
cmp %o2, 16
bgeu,pt %icc, 72b
nop
ba,a,pt %xcc, 73b
8: mov 64, GLOBAL_SPARE
andn %o1, 0x7, %o1
EX_LD(LOAD(ldx, %o1, %g2), NG2_retl_o2)
sub GLOBAL_SPARE, %g1, GLOBAL_SPARE
andn %o2, 0x7, %o4
sllx %g2, %g1, %g2
1: add %o1, 0x8, %o1
EX_LD(LOAD(ldx, %o1, %g3), NG2_retl_o2_and_7_plus_o4)
subcc %o4, 0x8, %o4
srlx %g3, GLOBAL_SPARE, %o5
or %o5, %g2, %o5
EX_ST(STORE(stx, %o5, %o0), NG2_retl_o2_and_7_plus_o4_plus_8)
add %o0, 0x8, %o0
bgu,pt %icc, 1b
sllx %g3, %g1, %g2
srl %g1, 3, %g1
andcc %o2, 0x7, %o2
be,pn %icc, 85f
add %o1, %g1, %o1
ba,pt %xcc, 90f
sub %o0, %o1, GLOBAL_SPARE
.align 64
80: /* 0 < len <= 16 */
andcc GLOBAL_SPARE, 0x3, %g0
bne,pn %XCC, 90f
sub %o0, %o1, GLOBAL_SPARE
1:
subcc %o2, 4, %o2
EX_LD(LOAD(lduw, %o1, %g1), NG2_retl_o2_plus_4)
EX_ST(STORE(stw, %g1, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_4)
bgu,pt %XCC, 1b
add %o1, 4, %o1
85: retl
mov EX_RETVAL(%o3), %o0
.align 32
90:
subcc %o2, 1, %o2
EX_LD(LOAD(ldub, %o1, %g1), NG2_retl_o2_plus_1)
EX_ST(STORE(stb, %g1, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_1)
bgu,pt %XCC, 90b
add %o1, 1, %o1
retl
mov EX_RETVAL(%o3), %o0
.size FUNC_NAME, .-FUNC_NAME
Reference in New Issue View Git Blame Copy Permalink