OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/mach-pxa
History
Marek Vasut e91fb9137d [ARM] pxa/palm27x: General fix for Palm27x aSoC driver 
Firstly, this patch makes the palm27x asoc driver a little more sane. Also,
since all affected devices use GPIO95 as AC97_nRESET, this patch sets that
properly. Affected are PalmT5, TX and LifeDrive.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-19 21:56:54 +08:00
..
include/mach
[ARM] pxa/palm27x: General fix for Palm27x aSoC driver
2009-04-19 21:56:54 +08:00
am200epd.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
am300epd.c
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
2009-02-10 11:28:00 +00:00
clock.c
[ARM] pxa: make second argument of clk_add_alias a name instead of the device
2009-03-19 16:20:39 +08:00
clock.h
[ARM] pxa: make second argument of clk_add_alias a name instead of the device
2009-03-19 16:20:39 +08:00
cm-x2xx-pci.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
cm-x2xx-pci.h
…
cm-x2xx.c
[ARM] pxa/cm-x2xx: fix ucb1400 not being registered
2009-04-04 10:26:34 +08:00
cm-x255.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
cm-x270.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
cm-x300.c
[ARM] pxa: add DM9000_PLATF_NO_EEPROM flag to CM-X... platforms
2009-03-09 21:22:40 +08:00
colibri-pxa3xx.c
[ARM] pxa/colibri: provide MAC address from ATAG_SERIAL
2009-04-04 10:26:34 +08:00
colibri-pxa270.c
[ARM] pxa: rename colibri.c to colibri-pxa270.c
2009-03-23 09:57:54 +08:00
colibri-pxa300.c
[ARM] pxa/colibri: get rid of set_irq_type()
2009-04-04 10:26:34 +08:00
colibri-pxa320.c
[ARM] pxa/colibri: get rid of set_irq_type()
2009-04-04 10:26:34 +08:00
corgi_lcd.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
corgi_pm.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
corgi_ssp.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
corgi.c
[ARM] pass reboot command line to arch_reset()
2009-03-19 16:20:24 +00:00
cpufreq-pxa2xx.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
cpufreq-pxa3xx.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
csb701.c
[ARM] pxa/csb701: do not register devices on non-csb726 boads
2009-04-04 10:26:35 +08:00
csb726.c
[ARM] pxa: add initial support for Cogent CSB726 board
2009-03-13 17:10:44 +08:00
devices.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
devices.h
[ARM] pxa: add resources for incoming rtc-pxa driver
2008-12-02 14:43:47 +08:00
e330.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e350.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e400.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e740.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
e750.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
e800.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
em-x270.c
[ARM] pxa/em-x270: remove duplicated #include
2009-04-14 22:55:36 +08:00
eseries.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
eseries.h
[ARM] pxa: Add multi-io support for e-series
2008-12-15 03:29:34 +00:00
ezx.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
generic.c
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
generic.h
[ARM] pxa: add missing declaration of pxa26x_init_irq()
2009-04-13 12:10:36 +08:00
gumstix.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
h5000.c
Merge branch 'origin' into devel
2009-03-28 20:29:51 +00:00
himalaya.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
idp.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
imote2.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
irq.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
Kconfig
[ARM] pxa: Palm Tungsten E2 basic support
2009-04-04 10:26:33 +08:00
leds-idp.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds-lubbock.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds-mainstone.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds.c
…
leds.h
…
littleton.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
lpd270.c
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
lubbock.c
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
2009-03-09 21:22:40 +08:00
magician.c
Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-04-06 09:57:38 +01:00
mainstone.c
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
Makefile
[ARM] pxa: Palm Tungsten E2 basic support
2009-04-04 10:26:33 +08:00
Makefile.boot
…
mfp-pxa2xx.c
[ARM] pxa: access GPIO registers by chip so to make it further generic
2009-03-09 21:22:38 +08:00
mfp-pxa3xx.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mioa701_bootresume.S
…
mioa701.c
[ARM] pxa/mioa701: use GPIO95 as AC97 reset line
2009-04-15 10:54:06 +08:00
mp900.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
palmld.c
[ARM] pxa/palm27x: General fix for Palm27x aSoC driver
2009-04-19 21:56:54 +08:00
palmt5.c
[ARM] pxa/palm27x: General fix for Palm27x aSoC driver
2009-04-19 21:56:54 +08:00
palmte2.c
[ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight
2009-04-04 10:26:33 +08:00
palmtx.c
[ARM] pxa/palm27x: General fix for Palm27x aSoC driver
2009-04-19 21:56:54 +08:00
palmz72.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pcm027.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pcm990-baseboard.c
V4L/DVB (11034): soc-camera: remove now unused gpio member of struct soc_camera_link
2009-03-30 12:43:22 -03:00
pm.c
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
2009-03-09 21:22:40 +08:00
poodle.c
[ARM] pass reboot command line to arch_reset()
2009-03-19 16:20:24 +00:00
pwm.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
pxa2xx.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa3xx.c
[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
2009-03-09 21:22:37 +08:00
pxa25x.c
[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
2009-03-09 21:22:37 +08:00
pxa27x.c
[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
2009-03-09 21:22:37 +08:00
pxa300.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
pxa320.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
pxa930.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
reset.c
[ARM] pass reboot command line to arch_reset()
2009-03-19 16:20:24 +00:00
saar.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
sharpsl_pm.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
sharpsl.h
…
sleep.S
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
smemc.c
…
spitz_pm.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
spitz.c
Merge branch 'origin' into devel
2009-03-28 20:29:51 +00:00
ssp.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
standby.S
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
tavorevb.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
time.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
tosa-bt.c
…
tosa.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
trizeps4.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
viper.c
[ARM] pxa: move PCMCIA definitions out of pxa-regs.h into pxa2xx_base.c
2009-03-09 21:22:39 +08:00
zylonite_pxa300.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
zylonite_pxa320.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
zylonite.c
[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>
2008-12-02 14:42:37 +08:00