2099172d61
This replaces the binding for flash chips in booting-without-of.txt with an clarified and improved version. It also makes drivers/mtd/maps/physmap_of.c recognize this new binding. Finally it revises the Ebony device tree source to use the new binding as an example. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
300 lines
6.6 KiB
Plaintext
300 lines
6.6 KiB
Plaintext
/*
|
|
* Device Tree Source for IBM Ebony
|
|
*
|
|
* Copyright (c) 2006, 2007 IBM Corp.
|
|
* Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
|
|
*
|
|
* FIXME: Draft only!
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
model = "ibm,ebony";
|
|
compatible = "ibm,ebony";
|
|
dcr-parent = <&/cpus/PowerPC,440GP@0>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,440GP@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
clock-frequency = <0>; // Filled in by zImage
|
|
timebase-frequency = <0>; // Filled in by zImage
|
|
i-cache-line-size = <20>;
|
|
d-cache-line-size = <20>;
|
|
i-cache-size = <8000>; /* 32 kB */
|
|
d-cache-size = <8000>; /* 32 kB */
|
|
dcr-controller;
|
|
dcr-access-method = "native";
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0 0 0>; // Filled in by zImage
|
|
};
|
|
|
|
UIC0: interrupt-controller0 {
|
|
compatible = "ibm,uic-440gp", "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <0>;
|
|
dcr-reg = <0c0 009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
UIC1: interrupt-controller1 {
|
|
compatible = "ibm,uic-440gp", "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <1>;
|
|
dcr-reg = <0d0 009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <1e 4 1f 4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
CPC0: cpc {
|
|
compatible = "ibm,cpc-440gp";
|
|
dcr-reg = <0b0 003 0e0 010>;
|
|
// FIXME: anything else?
|
|
};
|
|
|
|
plb {
|
|
compatible = "ibm,plb-440gp", "ibm,plb4";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clock-frequency = <0>; // Filled in by zImage
|
|
|
|
SDRAM0: memory-controller {
|
|
compatible = "ibm,sdram-440gp";
|
|
dcr-reg = <010 2>;
|
|
// FIXME: anything else?
|
|
};
|
|
|
|
SRAM0: sram {
|
|
compatible = "ibm,sram-440gp";
|
|
dcr-reg = <020 8 00a 1>;
|
|
};
|
|
|
|
DMA0: dma {
|
|
// FIXME: ???
|
|
compatible = "ibm,dma-440gp";
|
|
dcr-reg = <100 027>;
|
|
};
|
|
|
|
MAL0: mcmal {
|
|
compatible = "ibm,mcmal-440gp", "ibm,mcmal";
|
|
dcr-reg = <180 62>;
|
|
num-tx-chans = <4>;
|
|
num-rx-chans = <4>;
|
|
interrupt-parent = <&MAL0>;
|
|
interrupts = <0 1 2 3 4>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
|
|
/*RXEOB*/ 1 &UIC0 b 4
|
|
/*SERR*/ 2 &UIC1 0 4
|
|
/*TXDE*/ 3 &UIC1 1 4
|
|
/*RXDE*/ 4 &UIC1 2 4>;
|
|
interrupt-map-mask = <ffffffff>;
|
|
};
|
|
|
|
POB0: opb {
|
|
compatible = "ibm,opb-440gp", "ibm,opb";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/* Wish there was a nicer way of specifying a full 32-bit
|
|
range */
|
|
ranges = <00000000 1 00000000 80000000
|
|
80000000 1 80000000 80000000>;
|
|
dcr-reg = <090 00b>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <7 4>;
|
|
clock-frequency = <0>; // Filled in by zImage
|
|
|
|
EBC0: ebc {
|
|
compatible = "ibm,ebc-440gp", "ibm,ebc";
|
|
dcr-reg = <012 2>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
clock-frequency = <0>; // Filled in by zImage
|
|
// ranges property is supplied by zImage
|
|
// based on firmware's configuration of the
|
|
// EBC bridge
|
|
interrupts = <5 4>;
|
|
interrupt-parent = <&UIC1>;
|
|
|
|
small-flash@0,80000 {
|
|
compatible = "jedec-flash";
|
|
bank-width = <1>;
|
|
reg = <0 80000 80000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "OpenBIOS";
|
|
reg = <0 80000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
ds1743@1,0 {
|
|
/* NVRAM & RTC */
|
|
compatible = "ds1743";
|
|
reg = <1 0 2000>;
|
|
};
|
|
|
|
large-flash@2,0 {
|
|
compatible = "jedec-flash";
|
|
bank-width = <1>;
|
|
reg = <2 0 400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "fs";
|
|
reg = <0 380000>;
|
|
};
|
|
partition@380000 {
|
|
label = "firmware";
|
|
reg = <380000 80000>;
|
|
};
|
|
};
|
|
|
|
ir@3,0 {
|
|
reg = <3 0 10>;
|
|
};
|
|
|
|
fpga@7,0 {
|
|
compatible = "Ebony-FPGA";
|
|
reg = <7 0 10>;
|
|
virtual-reg = <e8300000>;
|
|
};
|
|
};
|
|
|
|
UART0: serial@40000200 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <40000200 8>;
|
|
virtual-reg = <e0000200>;
|
|
clock-frequency = <A8C000>;
|
|
current-speed = <2580>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0 4>;
|
|
};
|
|
|
|
UART1: serial@40000300 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <40000300 8>;
|
|
virtual-reg = <e0000300>;
|
|
clock-frequency = <A8C000>;
|
|
current-speed = <2580>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <1 4>;
|
|
};
|
|
|
|
IIC0: i2c@40000400 {
|
|
/* FIXME */
|
|
device_type = "i2c";
|
|
compatible = "ibm,iic-440gp", "ibm,iic";
|
|
reg = <40000400 14>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <2 4>;
|
|
};
|
|
IIC1: i2c@40000500 {
|
|
/* FIXME */
|
|
device_type = "i2c";
|
|
compatible = "ibm,iic-440gp", "ibm,iic";
|
|
reg = <40000500 14>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <3 4>;
|
|
};
|
|
|
|
GPIO0: gpio@40000700 {
|
|
/* FIXME */
|
|
compatible = "ibm,gpio-440gp";
|
|
reg = <40000700 20>;
|
|
};
|
|
|
|
ZMII0: emac-zmii@40000780 {
|
|
compatible = "ibm,zmii-440gp", "ibm,zmii";
|
|
reg = <40000780 c>;
|
|
};
|
|
|
|
EMAC0: ethernet@40000800 {
|
|
linux,network-index = <0>;
|
|
device_type = "network";
|
|
compatible = "ibm,emac-440gp", "ibm,emac";
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <1c 4 1d 4>;
|
|
reg = <40000800 70>;
|
|
local-mac-address = [000000000000]; // Filled in by zImage
|
|
mal-device = <&MAL0>;
|
|
mal-tx-channel = <0 1>;
|
|
mal-rx-channel = <0>;
|
|
cell-index = <0>;
|
|
max-frame-size = <5dc>;
|
|
rx-fifo-size = <1000>;
|
|
tx-fifo-size = <800>;
|
|
phy-mode = "rmii";
|
|
phy-map = <00000001>;
|
|
zmii-device = <&ZMII0>;
|
|
zmii-channel = <0>;
|
|
};
|
|
EMAC1: ethernet@40000900 {
|
|
linux,network-index = <1>;
|
|
device_type = "network";
|
|
compatible = "ibm,emac-440gp", "ibm,emac";
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <1e 4 1f 4>;
|
|
reg = <40000900 70>;
|
|
local-mac-address = [000000000000]; // Filled in by zImage
|
|
mal-device = <&MAL0>;
|
|
mal-tx-channel = <2 3>;
|
|
mal-rx-channel = <1>;
|
|
cell-index = <1>;
|
|
max-frame-size = <5dc>;
|
|
rx-fifo-size = <1000>;
|
|
tx-fifo-size = <800>;
|
|
phy-mode = "rmii";
|
|
phy-map = <00000001>;
|
|
zmii-device = <&ZMII0>;
|
|
zmii-channel = <1>;
|
|
};
|
|
|
|
|
|
GPT0: gpt@40000a00 {
|
|
/* FIXME */
|
|
reg = <40000a00 d4>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <12 4 13 4 14 4 15 4 16 4>;
|
|
};
|
|
|
|
};
|
|
|
|
PCIX0: pci@1234 {
|
|
device_type = "pci";
|
|
/* FIXME */
|
|
reg = <2 0ec00000 8
|
|
2 0ec80000 f0
|
|
2 0ec80100 fc>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = "/plb/opb/serial@40000200";
|
|
};
|
|
};
|