linux/drivers/ide/ns87415.c

350 lines
8.9 KiB
C

/*
* Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
* Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
*
* Inspired by an earlier effort from David S. Miller <davem@redhat.com>
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/io.h>
#define DRV_NAME "ns87415"
#ifdef CONFIG_SUPERIO
/* SUPERIO 87560 is a PoS chip that NatSem denies exists.
* Unfortunately, it's built-in on all Astro-based PA-RISC workstations
* which use the integrated NS87514 cell for CD-ROM support.
* i.e we have to support for CD-ROM installs.
* See drivers/parisc/superio.c for more gory details.
*/
#include <asm/superio.h>
#define SUPERIO_IDE_MAX_RETRIES 25
/* Because of a defect in Super I/O, all reads of the PCI DMA status
* registers, IDE status register and the IDE select register need to be
* retried
*/
static u8 superio_ide_inb (unsigned long port)
{
u8 tmp;
int retries = SUPERIO_IDE_MAX_RETRIES;
/* printk(" [ reading port 0x%x with retry ] ", port); */
do {
tmp = inb(port);
if (tmp == 0)
udelay(50);
} while (tmp == 0 && retries-- > 0);
return tmp;
}
static u8 superio_read_status(ide_hwif_t *hwif)
{
return superio_ide_inb(hwif->io_ports.status_addr);
}
static u8 superio_dma_sff_read_status(ide_hwif_t *hwif)
{
return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
}
static void superio_tf_read(ide_drive_t *drive, struct ide_taskfile *tf,
u8 valid)
{
struct ide_io_ports *io_ports = &drive->hwif->io_ports;
if (valid & IDE_VALID_ERROR)
tf->error = inb(io_ports->feature_addr);
if (valid & IDE_VALID_NSECT)
tf->nsect = inb(io_ports->nsect_addr);
if (valid & IDE_VALID_LBAL)
tf->lbal = inb(io_ports->lbal_addr);
if (valid & IDE_VALID_LBAM)
tf->lbam = inb(io_ports->lbam_addr);
if (valid & IDE_VALID_LBAH)
tf->lbah = inb(io_ports->lbah_addr);
if (valid & IDE_VALID_DEVICE)
tf->device = superio_ide_inb(io_ports->device_addr);
}
static void ns87415_dev_select(ide_drive_t *drive);
static const struct ide_tp_ops superio_tp_ops = {
.exec_command = ide_exec_command,
.read_status = superio_read_status,
.read_altstatus = ide_read_altstatus,
.write_devctl = ide_write_devctl,
.dev_select = ns87415_dev_select,
.tf_load = ide_tf_load,
.tf_read = superio_tf_read,
.input_data = ide_input_data,
.output_data = ide_output_data,
};
static void superio_init_iops(struct hwif_s *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
u32 dma_stat;
u8 port = hwif->channel, tmp;
dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
/* Clear error/interrupt, enable dma */
tmp = superio_ide_inb(dma_stat);
outb(tmp | 0x66, dma_stat);
}
#else
#define superio_dma_sff_read_status ide_dma_sff_read_status
#endif
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
/*
* This routine either enables/disables (according to IDE_DFLAG_PRESENT)
* the IRQ associated with the port,
* and selects either PIO or DMA handshaking for the next I/O operation.
*/
static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
unsigned long flags;
local_irq_save(flags);
new = *old;
/* Adjust IRQ enable bit */
bit = 1 << (8 + hwif->channel);
if (drive->dev_flags & IDE_DFLAG_PRESENT)
new &= ~bit;
else
new |= bit;
/* Select PIO or DMA, DMA may only be selected for one drive/channel. */
bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
if (new != *old) {
unsigned char stat;
/*
* Don't change DMA engine settings while Write Buffers
* are busy.
*/
(void) pci_read_config_byte(dev, 0x43, &stat);
while (stat & 0x03) {
udelay(1);
(void) pci_read_config_byte(dev, 0x43, &stat);
}
*old = new;
(void) pci_write_config_dword(dev, 0x40, new);
/*
* And let things settle...
*/
udelay(10);
}
local_irq_restore(flags);
}
static void ns87415_dev_select(ide_drive_t *drive)
{
ns87415_prepare_drive(drive,
!!(drive->dev_flags & IDE_DFLAG_USING_DMA));
outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
}
static void ns87415_dma_start(ide_drive_t *drive)
{
ns87415_prepare_drive(drive, 1);
ide_dma_start(drive);
}
static int ns87415_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
u8 dma_stat = 0, dma_cmd = 0;
dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
/* get DMA command mode */
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
/* stop DMA */
outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
/* from ERRATA: clear the INTR & ERROR bits */
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD);
ns87415_prepare_drive(drive, 0);
/* verify good DMA status */
return (dma_stat & 7) != 4;
}
static void init_hwif_ns87415 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned int ctrl, using_inta;
u8 progif;
#ifdef __sparc_v9__
int timeout;
u8 stat;
#endif
/*
* We cannot probe for IRQ: both ports share common IRQ on INTA.
* Also, leave IRQ masked during drive probing, to prevent infinite
* interrupts from a potentially floating INTA..
*
* IRQs get unmasked in dev_select() when drive is first used.
*/
(void) pci_read_config_dword(dev, 0x40, &ctrl);
(void) pci_read_config_byte(dev, 0x09, &progif);
/* is irq in "native" mode? */
using_inta = progif & (1 << (hwif->channel << 1));
if (!using_inta)
using_inta = ctrl & (1 << (4 + hwif->channel));
if (hwif->mate) {
hwif->select_data = hwif->mate->select_data;
} else {
hwif->select_data = (unsigned long)
&ns87415_control[ns87415_count++];
ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
if (using_inta)
ctrl &= ~(1 << 6); /* unmask INTA */
*((unsigned int *)hwif->select_data) = ctrl;
(void) pci_write_config_dword(dev, 0x40, ctrl);
/*
* Set prefetch size to 512 bytes for both ports,
* but don't turn on/off prefetching here.
*/
pci_write_config_byte(dev, 0x55, 0xee);
#ifdef __sparc_v9__
/*
* XXX: Reset the device, if we don't it will not respond to
* dev_select() properly during first ide_probe_port().
*/
timeout = 10000;
outb(12, hwif->io_ports.ctl_addr);
udelay(10);
outb(8, hwif->io_ports.ctl_addr);
do {
udelay(50);
stat = hwif->tp_ops->read_status(hwif);
if (stat == 0xff)
break;
} while ((stat & ATA_BUSY) && --timeout);
#endif
}
if (!using_inta)
hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
if (!hwif->dma_base)
return;
outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
}
static const struct ide_tp_ops ns87415_tp_ops = {
.exec_command = ide_exec_command,
.read_status = ide_read_status,
.read_altstatus = ide_read_altstatus,
.write_devctl = ide_write_devctl,
.dev_select = ns87415_dev_select,
.tf_load = ide_tf_load,
.tf_read = ide_tf_read,
.input_data = ide_input_data,
.output_data = ide_output_data,
};
static const struct ide_dma_ops ns87415_dma_ops = {
.dma_host_set = ide_dma_host_set,
.dma_setup = ide_dma_setup,
.dma_start = ns87415_dma_start,
.dma_end = ns87415_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timer_expiry = ide_dma_sff_timer_expiry,
.dma_sff_read_status = superio_dma_sff_read_status,
};
static const struct ide_port_info ns87415_chipset = {
.name = DRV_NAME,
.init_hwif = init_hwif_ns87415,
.tp_ops = &ns87415_tp_ops,
.dma_ops = &ns87415_dma_ops,
.host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_NO_ATAPI_DMA,
};
static int ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d = ns87415_chipset;
#ifdef CONFIG_SUPERIO
if (PCI_SLOT(dev->devfn) == 0xE) {
/* Built-in - assume it's under superio. */
d.init_iops = superio_init_iops;
d.tp_ops = &superio_tp_ops;
}
#endif
return ide_pci_init_one(dev, &d, NULL);
}
static const struct pci_device_id ns87415_pci_tbl[] = {
{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
static struct pci_driver ns87415_pci_driver = {
.name = "NS87415_IDE",
.id_table = ns87415_pci_tbl,
.probe = ns87415_init_one,
.remove = ide_pci_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
static int __init ns87415_ide_init(void)
{
return ide_pci_register_driver(&ns87415_pci_driver);
}
static void __exit ns87415_ide_exit(void)
{
pci_unregister_driver(&ns87415_pci_driver);
}
module_init(ns87415_ide_init);
module_exit(ns87415_ide_exit);
MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
MODULE_LICENSE("GPL");