315 lines
12 KiB
C
315 lines
12 KiB
C
/*
|
|
* OMAP clock: data structure definitions, function prototypes, shared macros
|
|
*
|
|
* Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
|
|
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
|
|
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __ARCH_ARM_OMAP_CLOCK_H
|
|
#define __ARCH_ARM_OMAP_CLOCK_H
|
|
|
|
#include <linux/list.h>
|
|
|
|
struct module;
|
|
struct clk;
|
|
struct clockdomain;
|
|
|
|
/**
|
|
* struct clkops - some clock function pointers
|
|
* @enable: fn ptr that enables the current clock in hardware
|
|
* @disable: fn ptr that enables the current clock in hardware
|
|
* @find_idlest: function returning the IDLEST register for the clock's IP blk
|
|
* @find_companion: function returning the "companion" clk reg for the clock
|
|
* @allow_idle: fn ptr that enables autoidle for the current clock in hardware
|
|
* @deny_idle: fn ptr that disables autoidle for the current clock in hardware
|
|
*
|
|
* A "companion" clk is an accompanying clock to the one being queried
|
|
* that must be enabled for the IP module connected to the clock to
|
|
* become accessible by the hardware. Neither @find_idlest nor
|
|
* @find_companion should be needed; that information is IP
|
|
* block-specific; the hwmod code has been created to handle this, but
|
|
* until hwmod data is ready and drivers have been converted to use PM
|
|
* runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
|
|
* @find_companion must, unfortunately, remain.
|
|
*/
|
|
struct clkops {
|
|
int (*enable)(struct clk *);
|
|
void (*disable)(struct clk *);
|
|
void (*find_idlest)(struct clk *, void __iomem **,
|
|
u8 *, u8 *);
|
|
void (*find_companion)(struct clk *, void __iomem **,
|
|
u8 *);
|
|
void (*allow_idle)(struct clk *);
|
|
void (*deny_idle)(struct clk *);
|
|
};
|
|
|
|
#ifdef CONFIG_ARCH_OMAP2PLUS
|
|
|
|
/* struct clksel_rate.flags possibilities */
|
|
#define RATE_IN_242X (1 << 0)
|
|
#define RATE_IN_243X (1 << 1)
|
|
#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
|
|
#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
|
|
#define RATE_IN_36XX (1 << 4)
|
|
#define RATE_IN_4430 (1 << 5)
|
|
#define RATE_IN_TI816X (1 << 6)
|
|
#define RATE_IN_4460 (1 << 7)
|
|
|
|
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
|
|
#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
|
|
#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
|
|
#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
|
|
|
|
/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
|
|
#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
|
|
|
|
|
|
/**
|
|
* struct clksel_rate - register bitfield values corresponding to clk divisors
|
|
* @val: register bitfield value (shifted to bit 0)
|
|
* @div: clock divisor corresponding to @val
|
|
* @flags: (see "struct clksel_rate.flags possibilities" above)
|
|
*
|
|
* @val should match the value of a read from struct clk.clksel_reg
|
|
* AND'ed with struct clk.clksel_mask, shifted right to bit 0.
|
|
*
|
|
* @div is the divisor that should be applied to the parent clock's rate
|
|
* to produce the current clock's rate.
|
|
*/
|
|
struct clksel_rate {
|
|
u32 val;
|
|
u8 div;
|
|
u8 flags;
|
|
};
|
|
|
|
/**
|
|
* struct clksel - available parent clocks, and a pointer to their divisors
|
|
* @parent: struct clk * to a possible parent clock
|
|
* @rates: available divisors for this parent clock
|
|
*
|
|
* A struct clksel is always associated with one or more struct clks
|
|
* and one or more struct clksel_rates.
|
|
*/
|
|
struct clksel {
|
|
struct clk *parent;
|
|
const struct clksel_rate *rates;
|
|
};
|
|
|
|
/**
|
|
* struct dpll_data - DPLL registers and integration data
|
|
* @mult_div1_reg: register containing the DPLL M and N bitfields
|
|
* @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
|
|
* @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
|
|
* @clk_bypass: struct clk pointer to the clock's bypass clock input
|
|
* @clk_ref: struct clk pointer to the clock's reference clock input
|
|
* @control_reg: register containing the DPLL mode bitfield
|
|
* @enable_mask: mask of the DPLL mode bitfield in @control_reg
|
|
* @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
|
|
* @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
|
|
* @max_multiplier: maximum valid non-bypass multiplier value (actual)
|
|
* @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
|
|
* @min_divider: minimum valid non-bypass divider value (actual)
|
|
* @max_divider: maximum valid non-bypass divider value (actual)
|
|
* @modes: possible values of @enable_mask
|
|
* @autoidle_reg: register containing the DPLL autoidle mode bitfield
|
|
* @idlest_reg: register containing the DPLL idle status bitfield
|
|
* @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
|
|
* @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
|
|
* @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
|
|
* @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
|
|
* @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
|
|
* @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
|
|
* @flags: DPLL type/features (see below)
|
|
*
|
|
* Possible values for @flags:
|
|
* DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
|
|
*
|
|
* @freqsel_mask is only used on the OMAP34xx family and AM35xx.
|
|
*
|
|
* XXX Some DPLLs have multiple bypass inputs, so it's not technically
|
|
* correct to only have one @clk_bypass pointer.
|
|
*
|
|
* XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
|
|
* @last_rounded_n) should be separated from the runtime-fixed fields
|
|
* and placed into a different structure, so that the runtime-fixed data
|
|
* can be placed into read-only space.
|
|
*/
|
|
struct dpll_data {
|
|
void __iomem *mult_div1_reg;
|
|
u32 mult_mask;
|
|
u32 div1_mask;
|
|
struct clk *clk_bypass;
|
|
struct clk *clk_ref;
|
|
void __iomem *control_reg;
|
|
u32 enable_mask;
|
|
unsigned long last_rounded_rate;
|
|
u16 last_rounded_m;
|
|
u16 max_multiplier;
|
|
u8 last_rounded_n;
|
|
u8 min_divider;
|
|
u16 max_divider;
|
|
u8 modes;
|
|
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
|
|
void __iomem *autoidle_reg;
|
|
void __iomem *idlest_reg;
|
|
u32 autoidle_mask;
|
|
u32 freqsel_mask;
|
|
u32 idlest_mask;
|
|
u32 dco_mask;
|
|
u32 sddiv_mask;
|
|
u8 auto_recal_bit;
|
|
u8 recal_en_bit;
|
|
u8 recal_st_bit;
|
|
u8 flags;
|
|
# endif
|
|
};
|
|
|
|
#endif
|
|
|
|
/*
|
|
* struct clk.flags possibilities
|
|
*
|
|
* XXX document the rest of the clock flags here
|
|
*
|
|
* CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
|
|
* bits share the same register. This flag allows the
|
|
* omap4_dpllmx*() code to determine which GATE_CTRL bit field
|
|
* should be used. This is a temporary solution - a better approach
|
|
* would be to associate clock type-specific data with the clock,
|
|
* similar to the struct dpll_data approach.
|
|
*/
|
|
#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
|
|
#define CLOCK_IDLE_CONTROL (1 << 1)
|
|
#define CLOCK_NO_IDLE_PARENT (1 << 2)
|
|
#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
|
|
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
|
|
#define CLOCK_CLKOUTX2 (1 << 5)
|
|
|
|
/**
|
|
* struct clk - OMAP struct clk
|
|
* @node: list_head connecting this clock into the full clock list
|
|
* @ops: struct clkops * for this clock
|
|
* @name: the name of the clock in the hardware (used in hwmod data and debug)
|
|
* @parent: pointer to this clock's parent struct clk
|
|
* @children: list_head connecting to the child clks' @sibling list_heads
|
|
* @sibling: list_head connecting this clk to its parent clk's @children
|
|
* @rate: current clock rate
|
|
* @enable_reg: register to write to enable the clock (see @enable_bit)
|
|
* @recalc: fn ptr that returns the clock's current rate
|
|
* @set_rate: fn ptr that can change the clock's current rate
|
|
* @round_rate: fn ptr that can round the clock's current rate
|
|
* @init: fn ptr to do clock-specific initialization
|
|
* @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
|
|
* @usecount: number of users that have requested this clock to be enabled
|
|
* @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
|
|
* @flags: see "struct clk.flags possibilities" above
|
|
* @clksel_reg: for clksel clks, register va containing src/divisor select
|
|
* @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
|
|
* @clksel: for clksel clks, pointer to struct clksel for this clock
|
|
* @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
|
|
* @clkdm_name: clockdomain name that this clock is contained in
|
|
* @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
|
|
* @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
|
|
* @src_offset: bitshift for source selection bitfield (OMAP1 only)
|
|
*
|
|
* XXX @rate_offset, @src_offset should probably be removed and OMAP1
|
|
* clock code converted to use clksel.
|
|
*
|
|
* XXX @usecount is poorly named. It should be "enable_count" or
|
|
* something similar. "users" in the description refers to kernel
|
|
* code (core code or drivers) that have called clk_enable() and not
|
|
* yet called clk_disable(); the usecount of parent clocks is also
|
|
* incremented by the clock code when clk_enable() is called on child
|
|
* clocks and decremented by the clock code when clk_disable() is
|
|
* called on child clocks.
|
|
*
|
|
* XXX @clkdm, @usecount, @children, @sibling should be marked for
|
|
* internal use only.
|
|
*
|
|
* @children and @sibling are used to optimize parent-to-child clock
|
|
* tree traversals. (child-to-parent traversals use @parent.)
|
|
*
|
|
* XXX The notion of the clock's current rate probably needs to be
|
|
* separated from the clock's target rate.
|
|
*/
|
|
struct clk {
|
|
struct list_head node;
|
|
const struct clkops *ops;
|
|
const char *name;
|
|
struct clk *parent;
|
|
struct list_head children;
|
|
struct list_head sibling; /* node for children */
|
|
unsigned long rate;
|
|
void __iomem *enable_reg;
|
|
unsigned long (*recalc)(struct clk *);
|
|
int (*set_rate)(struct clk *, unsigned long);
|
|
long (*round_rate)(struct clk *, unsigned long);
|
|
void (*init)(struct clk *);
|
|
u8 enable_bit;
|
|
s8 usecount;
|
|
u8 fixed_div;
|
|
u8 flags;
|
|
#ifdef CONFIG_ARCH_OMAP2PLUS
|
|
void __iomem *clksel_reg;
|
|
u32 clksel_mask;
|
|
const struct clksel *clksel;
|
|
struct dpll_data *dpll_data;
|
|
const char *clkdm_name;
|
|
struct clockdomain *clkdm;
|
|
#else
|
|
u8 rate_offset;
|
|
u8 src_offset;
|
|
#endif
|
|
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
|
|
struct dentry *dent; /* For visible tree hierarchy */
|
|
#endif
|
|
};
|
|
|
|
struct cpufreq_frequency_table;
|
|
|
|
struct clk_functions {
|
|
int (*clk_enable)(struct clk *clk);
|
|
void (*clk_disable)(struct clk *clk);
|
|
long (*clk_round_rate)(struct clk *clk, unsigned long rate);
|
|
int (*clk_set_rate)(struct clk *clk, unsigned long rate);
|
|
int (*clk_set_parent)(struct clk *clk, struct clk *parent);
|
|
void (*clk_allow_idle)(struct clk *clk);
|
|
void (*clk_deny_idle)(struct clk *clk);
|
|
void (*clk_disable_unused)(struct clk *clk);
|
|
#ifdef CONFIG_CPU_FREQ
|
|
void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
|
|
void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
|
|
#endif
|
|
};
|
|
|
|
extern int mpurate;
|
|
|
|
extern int clk_init(struct clk_functions *custom_clocks);
|
|
extern void clk_preinit(struct clk *clk);
|
|
extern int clk_register(struct clk *clk);
|
|
extern void clk_reparent(struct clk *child, struct clk *parent);
|
|
extern void clk_unregister(struct clk *clk);
|
|
extern void propagate_rate(struct clk *clk);
|
|
extern void recalculate_root_clocks(void);
|
|
extern unsigned long followparent_recalc(struct clk *clk);
|
|
extern void clk_enable_init_clocks(void);
|
|
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
|
|
#ifdef CONFIG_CPU_FREQ
|
|
extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
|
|
extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
|
|
#endif
|
|
extern struct clk *omap_clk_get_by_name(const char *name);
|
|
extern int omap_clk_enable_autoidle_all(void);
|
|
extern int omap_clk_disable_autoidle_all(void);
|
|
|
|
extern const struct clkops clkops_null;
|
|
|
|
extern struct clk dummy_ck;
|
|
|
|
#endif
|