6ab3d5624e
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
296 lines
6.7 KiB
C
296 lines
6.7 KiB
C
/*
|
|
* Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02)
|
|
*
|
|
* (c) 2002-2003 Saito.K & Jeanne
|
|
*
|
|
* Dustin McIntire (dustin@sensoria.com)
|
|
* Derived from arch/i386/kernel/pci-*.c which bore the message:
|
|
* (c) 1999--2000 Martin Mares <mj@ucw.cz>
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public
|
|
* License. See linux/COPYING for more information.
|
|
*
|
|
*/
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/machvec.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mpc1211/pci.h>
|
|
|
|
static struct resource mpcpci_io_resource = {
|
|
"MPCPCI IO",
|
|
0x00000000,
|
|
0xffffffff,
|
|
IORESOURCE_IO
|
|
};
|
|
|
|
static struct resource mpcpci_mem_resource = {
|
|
"MPCPCI mem",
|
|
0x00000000,
|
|
0xffffffff,
|
|
IORESOURCE_MEM
|
|
};
|
|
|
|
static struct pci_ops pci_direct_conf1;
|
|
struct pci_channel board_pci_channels[] = {
|
|
{&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256},
|
|
{NULL, NULL, NULL, 0, 0},
|
|
};
|
|
|
|
/*
|
|
* Direct access to PCI hardware...
|
|
*/
|
|
|
|
|
|
#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
|
|
|
|
/*
|
|
* Functions for accessing PCI configuration space with type 1 accesses
|
|
*/
|
|
static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
|
|
{
|
|
u32 word;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* PCIPDR may only be accessed as 32 bit words,
|
|
* so we must do byte alignment by hand
|
|
*/
|
|
local_irq_save(flags);
|
|
writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
|
|
word = readl(PCIPDR);
|
|
local_irq_restore(flags);
|
|
|
|
switch (size) {
|
|
case 1:
|
|
switch (where & 0x3) {
|
|
case 3:
|
|
*value = (u8)(word >> 24);
|
|
break;
|
|
case 2:
|
|
*value = (u8)(word >> 16);
|
|
break;
|
|
case 1:
|
|
*value = (u8)(word >> 8);
|
|
break;
|
|
default:
|
|
*value = (u8)word;
|
|
break;
|
|
}
|
|
break;
|
|
case 2:
|
|
switch (where & 0x3) {
|
|
case 3:
|
|
*value = (u16)(word >> 24);
|
|
local_irq_save(flags);
|
|
writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR);
|
|
word = readl(PCIPDR);
|
|
local_irq_restore(flags);
|
|
*value |= ((word & 0xff) << 8);
|
|
break;
|
|
case 2:
|
|
*value = (u16)(word >> 16);
|
|
break;
|
|
case 1:
|
|
*value = (u16)(word >> 8);
|
|
break;
|
|
default:
|
|
*value = (u16)word;
|
|
break;
|
|
}
|
|
break;
|
|
case 4:
|
|
*value = word;
|
|
break;
|
|
}
|
|
PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*
|
|
* Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.
|
|
* We'll allow an odd byte offset, though it should be illegal.
|
|
*/
|
|
static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
|
|
{
|
|
u32 word,mask = 0;
|
|
unsigned long flags;
|
|
u32 shift = (where & 3) * 8;
|
|
|
|
if(size == 1) {
|
|
mask = ((1 << 8) - 1) << shift; // create the byte mask
|
|
} else if(size == 2){
|
|
if(shift == 24)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
mask = ((1 << 16) - 1) << shift; // create the word mask
|
|
}
|
|
local_irq_save(flags);
|
|
writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
|
|
if(size == 4){
|
|
writel(value, PCIPDR);
|
|
local_irq_restore(flags);
|
|
PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
word = readl(PCIPDR);
|
|
word &= ~mask;
|
|
word |= ((value << shift) & mask);
|
|
writel(word, PCIPDR);
|
|
local_irq_restore(flags);
|
|
PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
#undef CONFIG_CMD
|
|
|
|
static struct pci_ops pci_direct_conf1 = {
|
|
.read = pci_conf1_read,
|
|
.write = pci_conf1_write,
|
|
};
|
|
|
|
static void __devinit quirk_ali_ide_ports(struct pci_dev *dev)
|
|
{
|
|
dev->resource[0].start = 0x1f0;
|
|
dev->resource[0].end = 0x1f7;
|
|
dev->resource[0].flags = IORESOURCE_IO;
|
|
dev->resource[1].start = 0x3f6;
|
|
dev->resource[1].end = 0x3f6;
|
|
dev->resource[1].flags = IORESOURCE_IO;
|
|
dev->resource[2].start = 0x170;
|
|
dev->resource[2].end = 0x177;
|
|
dev->resource[2].flags = IORESOURCE_IO;
|
|
dev->resource[3].start = 0x376;
|
|
dev->resource[3].end = 0x376;
|
|
dev->resource[3].flags = IORESOURCE_IO;
|
|
dev->resource[4].start = 0xf000;
|
|
dev->resource[4].end = 0xf00f;
|
|
dev->resource[4].flags = IORESOURCE_IO;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports);
|
|
|
|
char * __devinit pcibios_setup(char *str)
|
|
{
|
|
return str;
|
|
}
|
|
|
|
/*
|
|
* Called after each bus is probed, but before its children
|
|
* are examined.
|
|
*/
|
|
|
|
void __init pcibios_fixup_bus(struct pci_bus *b)
|
|
{
|
|
pci_read_bridge_bases(b);
|
|
}
|
|
|
|
/*
|
|
* IRQ functions
|
|
*/
|
|
static inline u8 bridge_swizzle(u8 pin, u8 slot)
|
|
{
|
|
return (((pin-1) + slot) % 4) + 1;
|
|
}
|
|
|
|
static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot)
|
|
{
|
|
return (((pin-1) - slot) & 3) + 1;
|
|
}
|
|
|
|
static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp)
|
|
{
|
|
unsigned long flags;
|
|
u8 pin = *pinp;
|
|
u32 word;
|
|
|
|
for ( ; dev->bus->self; dev = dev->bus->self) {
|
|
if (!pin)
|
|
continue;
|
|
|
|
if (dev->bus->number == 1) {
|
|
local_irq_save(flags);
|
|
writel(0x80000000 | 0x2c, PCIPAR);
|
|
word = readl(PCIPDR);
|
|
local_irq_restore(flags);
|
|
word >>= 16;
|
|
|
|
if (word == 0x0001)
|
|
pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn));
|
|
else
|
|
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
|
|
} else
|
|
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
|
|
}
|
|
|
|
*pinp = pin;
|
|
|
|
return PCI_SLOT(dev->devfn);
|
|
}
|
|
|
|
static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq = -1;
|
|
|
|
/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
|
|
if (dev->bus->number == 0) {
|
|
switch (slot) {
|
|
case 13: irq = 9; break; /* USB */
|
|
case 22: irq = 10; break; /* LAN */
|
|
default: irq = 0; break;
|
|
}
|
|
} else {
|
|
switch (pin) {
|
|
case 0: irq = 0; break;
|
|
case 1: irq = 7; break;
|
|
case 2: irq = 9; break;
|
|
case 3: irq = 10; break;
|
|
case 4: irq = 11; break;
|
|
}
|
|
}
|
|
|
|
if( irq < 0 ) {
|
|
PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev));
|
|
return irq;
|
|
}
|
|
|
|
PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
|
|
|
|
return irq;
|
|
}
|
|
|
|
void __init pcibios_fixup_irqs(void)
|
|
{
|
|
pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq);
|
|
}
|
|
|
|
void pcibios_align_resource(void *data, struct resource *res,
|
|
resource_size_t size, resource_size_t align)
|
|
{
|
|
resource_size_t start = res->start;
|
|
|
|
if (res->flags & IORESOURCE_IO) {
|
|
if (start >= 0x10000UL) {
|
|
if ((start & 0xffffUL) < 0x4000UL) {
|
|
start = (start & 0xffff0000UL) + 0x4000UL;
|
|
} else if ((start & 0xffffUL) >= 0xf000UL) {
|
|
start = (start & 0xffff0000UL) + 0x10000UL;
|
|
}
|
|
res->start = start;
|
|
} else {
|
|
if (start & 0x300) {
|
|
start = (start + 0x3ff) & ~0x3ff;
|
|
res->start = start;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|