linux/drivers/char/watchdog
Wim Van Sebroeck f3dc07330c [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
The PCWD cards normally use the heartbeat that is set via
the dip-switches of the card. There are only 3 switches,
thus 8 combinations that each have a certain heartbeat.
The card can however be programmed with a heartbeat from
1 till 65535 seconds. This is what our driver does: it
programs the heartbeat on the card.

There are however a lot of people that don't know that
we set the heartbeat of the watchdog card to the value
provided by the heartbeat module parameter. Instead they
think that the heartbeat value is the same as set by the
dip-switches.

This patch changes the driver so that at startup you can
take the heartbeat from the dip-switches. You do this
by setting the heartbeat module parameter to 0. This
patch also makes this the default behaviour.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-01-09 22:43:49 +01:00
..
Kconfig [WATCHDOG] MIPS RM9000 on-chip watchdog device 2006-11-17 20:45:24 +01:00
Makefile [WATCHDOG] MIPS RM9000 on-chip watchdog device 2006-11-17 20:45:24 +01:00
acquirewdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
advantechwdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
alim1535_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
alim7101_wdt.c [alim7101] Add pci dev table for auto module loading. 2006-10-18 08:24:30 -04:00
at91rm9200_wdt.c Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog 2006-12-12 23:48:41 +01:00
booke_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
cpu5wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
ep93xx_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
eurotechwdt.c IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 2006-10-05 15:10:12 +01:00
i8xx_tco.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
i8xx_tco.h
i6300esb.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
iTCO_vendor_support.c [WATCHDOG] Add iTCO vendor specific support 2006-11-12 18:05:09 +01:00
iTCO_wdt.c [WATCHDOG] Add iTCO vendor specific support 2006-11-12 18:05:09 +01:00
ib700wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
ibmasr.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
indydog.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
ixp4xx_wdt.c fix file specification in comments 2006-10-03 23:01:26 +02:00
ixp2000_wdt.c fix file specification in comments 2006-10-03 23:01:26 +02:00
machzwd.c [WATCHDOG] improve machzwd detection 2006-10-02 23:14:38 +02:00
mixcomwd.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
mpc8xx_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
mpc83xx_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
mpcore_wdt.c [WATCHDOG] watchdog miscdevice patch 2006-12-07 22:46:50 +01:00
mv64x60_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
omap_wdt.c [WATCHDOG] watchdog miscdevice patch 2006-12-07 22:46:50 +01:00
omap_wdt.h [PATCH] OMAP: Add Watchdog driver support 2006-09-29 09:18:07 -07:00
pc87413_wdt.c [WATCHDOG] config.h removal 2006-10-28 22:19:07 +02:00
pcwd.c [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches 2007-01-09 22:43:49 +01:00
pcwd_pci.c [WATCHDOG] pcwd_pci.c - spinlock fixes 2007-01-07 21:57:03 +01:00
pcwd_usb.c [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches 2007-01-08 22:45:30 +01:00
pnx4008_wdt.c [WATCHDOG] fix clk_get() error check 2006-12-19 22:16:51 +01:00
rm9k_wdt.c [WATCHDOG] rm9k_wdt: fix interrupt handler arguments 2006-12-07 22:41:35 +01:00
s3c2410_wdt.c [WATCHDOG] fix clk_get() error check 2006-12-19 22:16:51 +01:00
sa1100_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
sbc60xxwdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
sbc8360.c [PATCH] SBC8360: module_param() permission fixes 2006-09-01 11:39:08 -07:00
sbc_epx_c3.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
sc520_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
sc1200wdt.c [WATCHDOG] sc1200wdt.c pnp unregister fix. 2006-10-29 22:09:32 +01:00
scx200_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
shwdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
smsc37b787_wdt.c [WATCHDOG] Winbond SMsC37B787 watchdog fixes 2006-10-04 22:36:42 +02:00
softdog.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
w83627hf_wdt.c [WATCHDOG] w836?7hf_wdt spinlock fixes. 2006-10-04 22:41:48 +02:00
w83697hf_wdt.c [WATCHDOG] w83697hf/hg WDT driver - autodetect patch 2006-10-04 22:46:35 +02:00
w83877f_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
w83977f_wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
wafer5823wdt.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
wd501p.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
wdrtas.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
wdt.c IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 2006-10-05 15:10:12 +01:00
wdt285.c IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 2006-10-05 15:10:12 +01:00
wdt977.c [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() 2006-10-02 23:08:34 +02:00
wdt_pci.c IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 2006-10-05 15:10:12 +01:00