OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
f50f118c49
linux/arch/x86/ia32/ia32entry.S
H. Peter Anvin a3e859fed1 x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S 
Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S,
and replace them with _ASM_EXTABLE() macros; this will allow us to
change the format and type of the exception table entries.

This one was missed from the previous patch to this file.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: David Daney <david.daney@cavium.com>
Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
2012-04-20 16:51:50 -07:00

491 lines
13 KiB
ArmAsm
Raw Blame History

/*
* Compatibility mode system call entry point for x86-64.
*
* Copyright 2000-2002 Andi Kleen, SuSE Labs.
*/
#include <asm/dwarf2.h>
#include <asm/calling.h>
#include <asm/asm-offsets.h>
#include <asm/current.h>
#include <asm/errno.h>
#include <asm/ia32_unistd.h>
#include <asm/thread_info.h>
#include <asm/segment.h>
#include <asm/irqflags.h>
#include <asm/asm.h>
#include <linux/linkage.h>
#include <linux/err.h>
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
#define __AUDIT_ARCH_LE 0x40000000
#ifndef CONFIG_AUDITSYSCALL
#define sysexit_audit ia32_ret_from_sys_call
#define sysretl_audit ia32_ret_from_sys_call
#endif
.section .entry.text, "ax"
.macro IA32_ARG_FIXUP noebp=0
movl %edi,%r8d
.if \noebp
.else
movl %ebp,%r9d
.endif
xchg %ecx,%esi
movl %ebx,%edi
movl %edx,%edx /* zero extension */
.endm
/* clobbers %eax */
.macro CLEAR_RREGS offset=0, _r9=rax
xorl %eax,%eax
movq %rax,\offset+R11(%rsp)
movq %rax,\offset+R10(%rsp)
movq %\_r9,\offset+R9(%rsp)
movq %rax,\offset+R8(%rsp)
.endm
/*
* Reload arg registers from stack in case ptrace changed them.
* We don't reload %eax because syscall_trace_enter() returned
* the %rax value we should see. Instead, we just truncate that
* value to 32 bits again as we did on entry from user mode.
* If it's a new value set by user_regset during entry tracing,
* this matches the normal truncation of the user-mode value.
* If it's -1 to make us punt the syscall, then (u32)-1 is still
* an appropriately invalid value.
*/
.macro LOAD_ARGS32 offset, _r9=0
.if \_r9
movl \offset+16(%rsp),%r9d
.endif
movl \offset+40(%rsp),%ecx
movl \offset+48(%rsp),%edx
movl \offset+56(%rsp),%esi
movl \offset+64(%rsp),%edi
movl %eax,%eax /* zero extension */
.endm
.macro CFI_STARTPROC32 simple
CFI_STARTPROC \simple
CFI_UNDEFINED r8
CFI_UNDEFINED r9
CFI_UNDEFINED r10
CFI_UNDEFINED r11
CFI_UNDEFINED r12
CFI_UNDEFINED r13
CFI_UNDEFINED r14
CFI_UNDEFINED r15
.endm
#ifdef CONFIG_PARAVIRT
ENTRY(native_usergs_sysret32)
swapgs
sysretl
ENDPROC(native_usergs_sysret32)
ENTRY(native_irq_enable_sysexit)
swapgs
sti
sysexit
ENDPROC(native_irq_enable_sysexit)
#endif
/*
* 32bit SYSENTER instruction entry.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx Arg2
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp user stack
* 0(%ebp) Arg6
*
* Interrupts off.
*
* This is purely a fast path. For anything complicated we use the int 0x80
* path below. Set up a complete hardware stack frame to share code
* with the int 0x80 path.
*/
ENTRY(ia32_sysenter_target)
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,0
CFI_REGISTER rsp,rbp
SWAPGS_UNSAFE_STACK
movq PER_CPU_VAR(kernel_stack), %rsp
addq $(KERNEL_STACK_OFFSET),%rsp
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs, here we enable it straight after entry:
*/
ENABLE_INTERRUPTS(CLBR_NONE)
movl %ebp,%ebp /* zero extension */
pushq_cfi $__USER32_DS
/*CFI_REL_OFFSET ss,0*/
pushq_cfi %rbp
CFI_REL_OFFSET rsp,0
pushfq_cfi
/*CFI_REL_OFFSET rflags,0*/
movl TI_sysenter_return+THREAD_INFO(%rsp,3*8-KERNEL_STACK_OFFSET),%r10d
CFI_REGISTER rip,r10
pushq_cfi $__USER32_CS
/*CFI_REL_OFFSET cs,0*/
movl %eax, %eax
pushq_cfi %r10
CFI_REL_OFFSET rip,0
pushq_cfi %rax
cld
SAVE_ARGS 0,1,0
/* no need to do an access_ok check here because rbp has been
32bit zero extended */
1: movl (%rbp),%ebp
_ASM_EXTABLE(1b,ia32_badarg)
orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
CFI_REMEMBER_STATE
jnz sysenter_tracesys
cmpq $(IA32_NR_syscalls-1),%rax
ja ia32_badsys
sysenter_do_call:
IA32_ARG_FIXUP
sysenter_dispatch:
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX-ARGOFFSET(%rsp)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz sysexit_audit
sysexit_from_sys_call:
andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
/* clear IF, that popfq doesn't enable interrupts early */
andl $~0x200,EFLAGS-R11(%rsp)
movl RIP-R11(%rsp),%edx /* User %eip */
CFI_REGISTER rip,rdx
RESTORE_ARGS 0,24,0,0,0,0
xorq %r8,%r8
xorq %r9,%r9
xorq %r10,%r10
xorq %r11,%r11
popfq_cfi
/*CFI_RESTORE rflags*/
popq_cfi %rcx /* User %esp */
CFI_REGISTER rsp,rcx
TRACE_IRQS_ON
ENABLE_INTERRUPTS_SYSEXIT32
#ifdef CONFIG_AUDITSYSCALL
.macro auditsys_entry_common
movl %esi,%r9d /* 6th arg: 4th syscall arg */
movl %edx,%r8d /* 5th arg: 3rd syscall arg */
/* (already in %ecx) 4th arg: 2nd syscall arg */
movl %ebx,%edx /* 3rd arg: 1st syscall arg */
movl %eax,%esi /* 2nd arg: syscall number */
movl $AUDIT_ARCH_I386,%edi /* 1st arg: audit arch */
call __audit_syscall_entry
movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall number */
cmpq $(IA32_NR_syscalls-1),%rax
ja ia32_badsys
movl %ebx,%edi /* reload 1st syscall arg */
movl RCX-ARGOFFSET(%rsp),%esi /* reload 2nd syscall arg */
movl RDX-ARGOFFSET(%rsp),%edx /* reload 3rd syscall arg */
movl RSI-ARGOFFSET(%rsp),%ecx /* reload 4th syscall arg */
movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */
.endm
.macro auditsys_exit exit
testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz ia32_ret_from_sys_call
TRACE_IRQS_ON
sti
movl %eax,%esi /* second arg, syscall return value */
cmpl $-MAX_ERRNO,%eax /* is it an error ? */
jbe 1f
movslq %eax, %rsi /* if error sign extend to 64 bits */
1: setbe %al /* 1 if error, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
call __audit_syscall_exit
movq RAX-ARGOFFSET(%rsp),%rax /* reload syscall return value */
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
cli
TRACE_IRQS_OFF
testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jz \exit
CLEAR_RREGS -ARGOFFSET
jmp int_with_check
.endm
sysenter_auditsys:
CFI_RESTORE_STATE
auditsys_entry_common
movl %ebp,%r9d /* reload 6th syscall arg */
jmp sysenter_dispatch
sysexit_audit:
auditsys_exit sysexit_from_sys_call
#endif
sysenter_tracesys:
#ifdef CONFIG_AUDITSYSCALL
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jz sysenter_auditsys
#endif
SAVE_REST
CLEAR_RREGS
movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
cmpq $(IA32_NR_syscalls-1),%rax
ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
jmp sysenter_do_call
CFI_ENDPROC
ENDPROC(ia32_sysenter_target)
/*
* 32bit SYSCALL instruction entry.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx return EIP
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp Arg2 [note: not saved in the stack frame, should not be touched]
* %esp user stack
* 0(%esp) Arg6
*
* Interrupts off.
*
* This is purely a fast path. For anything complicated we use the int 0x80
* path below. Set up a complete hardware stack frame to share code
* with the int 0x80 path.
*/
ENTRY(ia32_cstar_target)
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
SWAPGS_UNSAFE_STACK
movl %esp,%r8d
CFI_REGISTER rsp,r8
movq PER_CPU_VAR(kernel_stack),%rsp
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_ARGS 8,0,0
movl %eax,%eax /* zero extension */
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
movq %rbp,RCX-ARGOFFSET(%rsp) /* this lies slightly to ptrace */
movl %ebp,%ecx
movq $__USER32_CS,CS-ARGOFFSET(%rsp)
movq $__USER32_DS,SS-ARGOFFSET(%rsp)
movq %r11,EFLAGS-ARGOFFSET(%rsp)
/*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
movq %r8,RSP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rsp,RSP-ARGOFFSET
/* no need to do an access_ok check here because r8 has been
32bit zero extended */
/* hardware stack frame is complete now */
1: movl (%r8),%r9d
_ASM_EXTABLE(1b,ia32_badarg)
orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
CFI_REMEMBER_STATE
jnz cstar_tracesys
cmpq $IA32_NR_syscalls-1,%rax
ja ia32_badsys
cstar_do_call:
IA32_ARG_FIXUP 1
cstar_dispatch:
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX-ARGOFFSET(%rsp)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz sysretl_audit
sysretl_from_sys_call:
andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
RESTORE_ARGS 0,-ARG_SKIP,0,0,0
movl RIP-ARGOFFSET(%rsp),%ecx
CFI_REGISTER rip,rcx
movl EFLAGS-ARGOFFSET(%rsp),%r11d
/*CFI_REGISTER rflags,r11*/
xorq %r10,%r10
xorq %r9,%r9
xorq %r8,%r8
TRACE_IRQS_ON
movl RSP-ARGOFFSET(%rsp),%esp
CFI_RESTORE rsp
USERGS_SYSRET32
#ifdef CONFIG_AUDITSYSCALL
cstar_auditsys:
CFI_RESTORE_STATE
movl %r9d,R9-ARGOFFSET(%rsp) /* register to be clobbered by call */
auditsys_entry_common
movl R9-ARGOFFSET(%rsp),%r9d /* reload 6th syscall arg */
jmp cstar_dispatch
sysretl_audit:
auditsys_exit sysretl_from_sys_call
#endif
cstar_tracesys:
#ifdef CONFIG_AUDITSYSCALL
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jz cstar_auditsys
#endif
xchgl %r9d,%ebp
SAVE_REST
CLEAR_RREGS 0, r9
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET, 1 /* reload args from stack in case ptrace changed it */
RESTORE_REST
xchgl %ebp,%r9d
cmpq $(IA32_NR_syscalls-1),%rax
ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
jmp cstar_do_call
END(ia32_cstar_target)
ia32_badarg:
movq $-EFAULT,%rax
jmp ia32_sysret
CFI_ENDPROC
/*
* Emulated IA32 system calls via int 0x80.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx Arg2
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp Arg6 [note: not saved in the stack frame, should not be touched]
*
* Notes:
* Uses the same stack frame as the x86-64 version.
* All registers except %eax must be saved (but ptrace may violate that)
* Arguments are zero extended. For system calls that want sign extension and
* take long arguments a wrapper is needed. Most calls can just be called
* directly.
* Assumes it is only called from user space and entered with interrupts off.
*/
ENTRY(ia32_syscall)
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8-RIP
/*CFI_REL_OFFSET ss,SS-RIP*/
CFI_REL_OFFSET rsp,RSP-RIP
/*CFI_REL_OFFSET rflags,EFLAGS-RIP*/
/*CFI_REL_OFFSET cs,CS-RIP*/
CFI_REL_OFFSET rip,RIP-RIP
PARAVIRT_ADJUST_EXCEPTION_FRAME
SWAPGS
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
ENABLE_INTERRUPTS(CLBR_NONE)
movl %eax,%eax
pushq_cfi %rax
cld
/* note the registers are not zero extended to the sf.
this could be a problem. */
SAVE_ARGS 0,1,0
orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
jnz ia32_tracesys
cmpq $(IA32_NR_syscalls-1),%rax
ja ia32_badsys
ia32_do_call:
IA32_ARG_FIXUP
call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
ia32_sysret:
movq %rax,RAX-ARGOFFSET(%rsp)
ia32_ret_from_sys_call:
CLEAR_RREGS -ARGOFFSET
jmp int_ret_from_sys_call
ia32_tracesys:
SAVE_REST
CLEAR_RREGS
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
cmpq $(IA32_NR_syscalls-1),%rax
ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */
jmp ia32_do_call
END(ia32_syscall)
ia32_badsys:
movq $0,ORIG_RAX-ARGOFFSET(%rsp)
movq $-ENOSYS,%rax
jmp ia32_sysret
CFI_ENDPROC
.macro PTREGSCALL label, func, arg
ALIGN
GLOBAL(\label)
leaq \func(%rip),%rax
leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
jmp ia32_ptregs_common
.endm
CFI_STARTPROC32
PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi
PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi
PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx
PTREGSCALL stub32_execve, sys32_execve, %rcx
PTREGSCALL stub32_fork, sys_fork, %rdi
PTREGSCALL stub32_clone, sys32_clone, %rdx
PTREGSCALL stub32_vfork, sys_vfork, %rdi
PTREGSCALL stub32_iopl, sys_iopl, %rsi
ALIGN
ia32_ptregs_common:
popq %r11
CFI_ENDPROC
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8-ARGOFFSET
CFI_REL_OFFSET rax,RAX-ARGOFFSET
CFI_REL_OFFSET rcx,RCX-ARGOFFSET
CFI_REL_OFFSET rdx,RDX-ARGOFFSET
CFI_REL_OFFSET rsi,RSI-ARGOFFSET
CFI_REL_OFFSET rdi,RDI-ARGOFFSET
CFI_REL_OFFSET rip,RIP-ARGOFFSET
/* CFI_REL_OFFSET cs,CS-ARGOFFSET*/
/* CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
CFI_REL_OFFSET rsp,RSP-ARGOFFSET
/* CFI_REL_OFFSET ss,SS-ARGOFFSET*/
SAVE_REST
call *%rax
RESTORE_REST
jmp ia32_sysret /* misbalances the return cache */
CFI_ENDPROC
END(ia32_ptregs_common)
Reference in New Issue View Git Blame Copy Permalink