linux/drivers/usb
George Cherian f905bc6883 usb: musb: core: Disable the Interrupts till BABBLE is fully handled
Disable the MUSB interrupts till MUSB is recovered fully from BABBLE
condition. There are chances that we could get multiple interrupts
till the time the babble recover work gets scheduled. Sometimes
this could even end up in an endless loop making MUSB itself unusable.

Reported-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-18 09:55:31 -06:00
..
atm
c67x00
chipidea usb: chipidea: gadget: use udc-core's reset notifier 2014-11-10 17:19:35 -06:00
class
common usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
core usb: allow to supply the PHY in the drivers when using HCD 2014-11-03 10:02:50 -06:00
dwc2 usb: dwc2: Update Kconfig to support dual-role 2014-11-14 15:00:07 -06:00
dwc3 usb: dwc3: gadget: use udc-core's reset notifier 2014-11-10 17:19:34 -06:00
early
gadget usb: gadget: f_hid: fix error handling in ghid_setup() 2014-11-18 08:47:44 -06:00
host usb: host: ohci: omap: fix build breakage 2014-11-10 17:19:38 -06:00
image
misc
mon
musb usb: musb: core: Disable the Interrupts till BABBLE is fully handled 2014-11-18 09:55:31 -06:00
phy usb: phy: fsl: Fix build errors 2014-11-12 08:37:37 -06:00
renesas_usbhs usb: renesas_usbhs: expand USB-DMAC channels for R-Car Gen2 2014-11-12 09:11:31 -06:00
serial usb: serial: ftdi_sio: add "bricked" FTDI device PID 2014-10-23 09:52:57 +02:00
storage
usbip
wusbcore
Kconfig
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.