linux/arch/arm/mach-s3c24xx
Heiko Stuebner 1fecf8958e ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
s3c2410 and s3c2442 share the same dma channels while s3c2440 has
slight differences. But on all three the reachable sources per dma
channel has constraints attached and thus encodes the usable
combinations using the S3C24XX_DMA_CHANREQ macro.

This also fixes the warning about s3c2410_dma_resource being unused
as reported by Olof Johansson.

Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-21 05:32:48 +09:00
..
include/mach ARM: SAMSUNG: Unify base address definitions of timer block 2013-08-06 01:21:44 +02:00
Kconfig ARM: S3C24XX: Fix possible dma selection warning 2013-10-21 05:32:48 +09:00
Makefile
Makefile.boot
anubis.h
bast-ide.c
bast-irq.c
bast.h
clock-dclk.c
clock-s3c244x.c
clock-s3c2410.c ARM: SAMSUNG: Remove pwm-clock infrastructure 2013-08-12 21:53:24 +02:00
clock-s3c2412.c ARM: S3C24XX: number the dma clocks 2013-10-08 06:42:10 +09:00
clock-s3c2416.c ARM: SAMSUNG: Remove pwm-clock infrastructure 2013-08-12 21:53:24 +02:00
clock-s3c2440.c ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART 2013-07-24 13:23:51 +09:00
clock-s3c2443.c ARM: SAMSUNG: Remove pwm-clock infrastructure 2013-08-12 21:53:24 +02:00
common-s3c2443.c ARM: S3C24XX: number the dma clocks 2013-10-08 06:42:10 +09:00
common-smdk.c
common-smdk.h
common.c ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 2013-10-21 05:32:48 +09:00
common.h ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 2013-10-21 05:32:48 +09:00
cpufreq-utils.c
dma-s3c2410.c
dma-s3c2412.c
dma-s3c2440.c
dma-s3c2443.c
dma.c
gta02.h
h1940-bluetooth.c
h1940.h
iotiming-s3c2410.c
iotiming-s3c2412.c
irq-pm.c
mach-amlm5900.c
mach-anubis.c
mach-at2440evb.c
mach-bast.c
mach-gta02.c
mach-h1940.c ARM: SAMSUNG: Modify board files to use new PWM platform device 2013-08-12 21:53:22 +02:00
mach-jive.c ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 2013-10-08 06:42:10 +09:00
mach-mini2440.c
mach-n30.c
mach-nexcoder.c
mach-osiris-dvs.c
mach-osiris.c
mach-otom.c
mach-qt2410.c
mach-rx1950.c ARM: SAMSUNG: Modify board files to use new PWM platform device 2013-08-12 21:53:22 +02:00
mach-rx3715.c
mach-s3c2416-dt.c
mach-smdk2410.c
mach-smdk2413.c ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 2013-10-08 06:42:10 +09:00
mach-smdk2416.c ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 2013-10-08 06:42:10 +09:00
mach-smdk2440.c
mach-smdk2443.c ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 2013-10-08 06:42:10 +09:00
mach-tct_hammer.c
mach-vr1000.c
mach-vstms.c ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443 2013-10-08 06:42:10 +09:00
osiris.h
otom.h
pll-s3c2410.c
pll-s3c2440-12000000.c
pll-s3c2440-16934400.c
pm-h1940.S
pm-s3c2410.c
pm-s3c2412.c
pm-s3c2416.c
pm.c
regs-dsc.h
regs-mem.h
s3c244x.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
s3c2410.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
s3c2412-power.h
s3c2412.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
s3c2416.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
s3c2440.c
s3c2442.c
s3c2443.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
setup-i2c.c
setup-sdhci-gpio.c
setup-spi.c
setup-ts.c
simtec-audio.c
simtec-nor.c
simtec-pm.c
simtec-usb.c
simtec.h
sleep-s3c2410.S
sleep-s3c2412.S
sleep.S
vr1000.h